How much RAM can I install in my Macbook Pro?

I have a late 2011 model Macbook Pro. It is a 13 inch with 2.8 Ghz Intel i7 duo core processor and 4 GB (2 x 2) RAM. Can I upgrade to 16 GB (2 x 8) RAM?

Installing RAM in a 2011-2012 MacBook Pro
There is really only one way to install RAM into a 2011-2012 MacBook Pro and while there are hundreds of DIY videos online, I just like this one, found on YouTube, by “macmixing”.
Note that there is a difference in the RAM that should be used in 2011 and 2012 models.
2011 models must use:
•204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
And 2012 models must use:
•204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
So here's the video:
Remember that the 13", 15" and 17" 2011 models (early or late) and the 13" and 15" mid-2012 non-Retina models can handle 4GB, 8GB or (unofficially, but, believe me, it works) 16GB of RAM. There are, in my opinion, only three 100% Mac-compatible vendors out there: Corsair, Crucial and OWC. I really can't recommend any other brands, even though it may work, as these are the only brands that I've personally used in quite a while. Also remember to stay away from any RAM that is a “value” brand - Macs are picky about RAM and often these value RAM modules just don’t work very well.
Good luck,
Clinton

Similar Messages

  • How much RAM can I install on my MacBook Pro?

    I'm thinking of upgrading the RAM on my MacBook Pro 13-inch Late 2012 Non-Retina with a 2.5 GHz Intel Core i5 chip in it. I currently have 4GB of RAM in it (2x4) and I want to upgrade to 16GB of RAM (2x8). Can I do this upgrade?

    Sure, you can remove the Ram that you have and replace it with 2 x 8GB chips. Macs are picky about Ram, buy it from OWC, or Crucial.

  • How much Ram can I add to my MacBook Pro?

    Another non-techie here with a memory question
    How much RAM can I add to my MacBook
    Model Identifier: MacBookPro2,1
    MacBook Pro (late 2006)
    Processor 2.33GHz Intel Core 2 Duo
    Current memory: 2GB (two SO-DIMMs) 667 MHz DDRs SDRAM (PC2-5300)
    The actual installation sounds quite simple.  I just want to be sure I get the right chips.  Any sources you can recommend?
    TIA
    Jim

    http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .33-17-specs.html
    3 gb of ram as two modules of 2 gb each.
    Try http://www.macsales.com/

  • How much RAM can I put into my Macbook Pro?

    Here's my info:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro4,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
    I want to upgrade my RAM, as the computer is showing a bit of age at 3 years old now.  I looked at this support page:
    http://support.apple.com/kb/HT1270#link8
    And judged the installation to be easy enough for me to do, but I'm confused as to how much RAM I can buy.  The conflict I see is that "Additional notes" says I can use up to 8GB of RAM, but the table says only 4GB.  What's throwing me off is basic math -- is that 4GB only referring to my slots (thus 4+4=8) or is it saying that anything over 4GB will not be recognized by my computer?
    I spoke with someone at Apple, but he seemed a bit confused by my question, and eventually gave me a "yes" that was timid enough that I felt the need to post here.  So, I'd appreciate the support!  Thanks a lot, everyone.  I'm just looking to not spend more than I need (in terms of buying excess RAM), and make sure I don't ruin my Mac in the process.

    The MacBook Pro 4,1 can acces a maximum RAM of 6GB
    However RAM comes in 4GB modules and you have two slots, so you install 8GB (two 4GB modules) and can only access 6GB of it according to MacTracker.
    Use the free Crucial.com site to make sure your getting the extact specified RAM specs, you can buy it anywhere if you like.
    http://www.crucial.com/
    (no comp)

  • How many RAMs can i install into my macbook pro-13 inches?

    I'm considering to buy RAMs for my mac, originally there are two 2GB RAMs installed,is there only 2 plugs? Do i need to replace the original RAM or i can just add the new RAM into my mac?

    There are 'only' two slots for RAM modules in the 13" MacBook Pros.
    So you have to replace the RAMs that are curently in it.
    Pick the one you have from this list http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html to see how much RAM you can out into it.
    Stefan

  • How much RAM can i put in my MacBook Pro 13inch?8GB or 16GB?

    I want to upgrade the RAM in my MacBook Pro and wanted to know how much is possible technically. I read 16GB are possible but Apple says 8GB optional.What is right?16GB or 8GB

    Welcome to the Apple Support Communities
    You have a Mid 2012 MacBook Pro. Apple says that it only supports 8 GB of memory, but the truth is that you can install up to 16 GB (2x8 GB) of memory on a Mid 2012 MacBook Pro.
    If you want 16 GB of memory, you can buy memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility as OWC). If you need help installing memory > http://support.apple.com/kb/HT1270#link1

  • How much RAM can I put in my Macbook Pro (late 2006), and how much will it cost me?

    I am currently running at a:
    2.33 GHz Intel Core 2 Duo Processor
    2 GB 667 MHz DDR2 SDRAM in Memory
    ATI Radeon X1600 256 MB in Graphics
    Mac OS X Lion 10.7.5 (11G63) in Software
    & it's a 15inch Macbook Pro incapable of upgrading to Mountain Lion.
    I know i have a lot of limitations due to the age of this mac, but I would like
    to know as to how far I can go with the one that I have. Please help.

    Your MBP will be able to use a maximum of 3 Gb RAM.  The exact specifications are: 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM.  Best sources are Crucial and OWC.  Their websites will have the prices.
    Snow Leopard is an excellent OS.  I have it on my 2010 MBP and have no intention of installing Lion/Mt Lion.  It is stable and efficient, more so than the newer ones.  Do not view that as a handicap.
    You might also consider installing a larger HDD.  Your MBP can handle the largest ones available to day (1 Tb).  For a pre-unibody MBP, it is a bit harder than the current crop but achievable of you have rudimentary mechanical skills and a bit of patience.  See the OWC website for excellent how to do it videos.
    Ciao.

  • How much ram can you put in a Macbook Pro 7,1?

    I have what I thought was 2011 macbook pro, but when I just looked it up the 7,1 appears to be a 2010. Anyway, I want to max out the ram. OWC says you can put in 16GB of the DDR3 1066MHz SO-DIMM; here is the link: http://eshop.macsales.com/item/OWC/8566DDR3S16P/ Has anyone done this and does it work?

    If OWC says it will work, it will work.  The 2010 13" MBP can accept 16 GB RAM due to a relatively new firmware update.  Other 2010 MBPs cannot (still).
    Ciao.
    Carefull on the specifications!  They should be:  204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM.
    Message was edited by: OGELTHORPE

  • How much ram can i upgrade my 2009 MacBook Pro running 2.26ghz

    i currently upgrade my MacBook Pro mid 2009 with 2x 4GHZ 1066 mhz ddr3 and keeps on quitting while I'm using it. why?

    What brand of RAM did you purchase?
    Have you taken out the modules , cleaned the contacts and reinstalled them?
    Have you tried the original RAM?
    Have you run an Apple hardware Test?
    http://support.apple.com/en-us/HT201257
    Note an error free AHT is not definitive.
    Ciao.

  • How much RAM can I put into my macbook pro 15 inch?

    I want to put as much as possible in the two slots...how big can they be?
    2.4 ghz intel core 2 duo
    1gb ram 667 MHz DDR2 Sdram

    Click here.
    (57428)

  • How much RAM can be installed on a MacPro4.1?

    How much RAM can be installed on a MacPro4.1?

    physically 8 x 16GB, addressable in 10.8.3 is 96GB
    you still on snow leopard? you can also use that.
    6 x 8GB is probably more or as much as you need and try www.macsales.com/memory for kits

  • How much Ram do I need in a MacBook Pro for Software Engineering?

    I plan to buy a new MacBook Pro in the next month for school and hopefully for work. I would like this computer to get me at least 4 years of use. I will be majoring in software engineering. My question is how much ram would I need in a Macbook Pro for software engineering? I am currenty looking at the 15" 2.3ghz base model with 8gb of ram as well as the 15" 2.4ghz base model retina. I really like the retina but its at my max budget. Will the 8gb of ram be enough since it is not upgradable? Any help will be greatly appreciated.

    I am currenty looking at the 15" 2.3ghz base model with 8gb of ram
    The MB Pro 15" 2.3Ghz with 8GB of RAM should do the trick.
    Save your $$$ on the retina and stick to your budget 

  • How much ram can I install in macbook pro

    I have a 15" Macbook Pro with the 2.4GHZ processor.  Purchased in 2008.  How much RAM can I put in it?
    Thanks!  George

    Here is what I found.....
    Model Name: MacBook Pro
      Model Identifier: MacBookPro4,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.4 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 2 GB
      Bus Speed: 800 MHz
      Boot ROM Version: MBP41.00C1.B00
      SMC Version (system): 1.27f3
      Serial Number (system): W881****YJZ
      Hardware UUID: 25EAF703-47DE-5074-AACB-10371AD4B7EE
      Sudden Motion Sensor:
      State: Enabled
    System Version: Mac OS X 10.5.8 (9L31a)
    <Edited by Host>

  • How much RAM can I install?

    Alright.  This seems simple but I don't want to have to go through the rigamarole of buying the wrong one and having to return it. 
    I have a Mid-2010 MacBook Pro running Lion 10.7.3, currently with the 4gb of RAM that it came with.  I want to upgrade this.
    I am aware that there are two slots that I can use to upgrade.  My question is this: the spec page for my model (http://support.apple.com/kb/SP582) states that it has "4GB (two 2GB SO-DIMMs) of 1066MHz DDR3 memory; two SO-DIMM slots support up to 8GB."  Does this mean that I can have 8 total (meaning I can only add 4), or that I can add 8 gigs, making a total of 12?  As far as I'm aware, the base 4 are located somewhere else inside the computer, leaving the two expansion slots empty. 
    Thanks in advance for any help. 

    Hi. You can upgrade to a maximum of 8gB, utilizing the 2 existing slots. You would need to replace both 2-2gB sticks with 2-4gB sticks.
    Stedman

  • How much Ram can I install in a mid 2011 mac mini, 2.3Ghz?

    I have a mid 2011 mac mini with a 2.3 Ghz processor and the factory installed 2GB of ram.  I would like to increase my ram but I am confused about the amount it can handle.  everywhere i look on the internet it says it can handle up to 8GB however i spoke with apple care on the phone and they said it can handle up to 16GB.  So which is it?
    thank you for your help.

    Click here.
    (115066)

Maybe you are looking for

  • Unable to start default server (IntegratedWeblogicServer) in jDev 11.1.1.2

    Hey guys, I am using the new release of jDev 11g (11.1.1.2) when ever i try starting the Default Server, i get the following message: The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully. [09:27:38 A

  • Memory issues on Production system

    Hello, We are facing memory dumps and slow SAP performance on our PRODUCTION ECC EHP4 system. Many work process also goes to PRIV mode frequently But we have very good response Time also. I checked ST06 and see, CPU Idle % = 40% IO wait % = 16% CPU c

  • Default Header text in Purchase Order

    Dear All, I want to have a default PO header text.I.e whenever I create a PO the header text say "This PO is for XYX" should come as default in Header Text. How this can be achived.Through Config OR using some Function module.. what are the config.st

  • X-Fi XtremeMusic BSOD on B

    This just started happening a month ago and I can't figure it out. My X-Fi causes Vista to BSOD on boot when installed. When I take the X-Fi out, it works fine. I'm also getting a ton of "Unknown PCI Device" in the device summary screen on boot. Neve

  • Weblogic 12c console doesn't update with datasources defined

    Hi Guys, I've observed this behaviour.. which seems to me as a bug somewhere.. Here is what happens.. 1. I define a datasource 2. Then I try to create JDBCStore for JMS messages.. I don't see my defined datasource in step-1 in the dropdown list.. 3.