How Much RAM Do I Need in a Mac Pro to edit together hour-long videos for our church?

We need a new computer to edit video together for our services at church. We broadcast these videos each week, so we use our editing computer quite a bit. We also produce shorter videos for use online and in our services. Looking at moving to a Mac, and I'm not quite sure how much RAM we should purchase in a Mac Pro to avoid long rendering times. Obviously, we need to keep costs as low as possible, but we want something that will work, and last for a while. Thanks!

The fastest 6-core is the "sweet spot" in the lineup. near twice the compute power of the entry model at only 1.5 times the cost.
6GB is fine for "regular" stuff you do on a Mac. Video editing without pain often requires more ... up to as much as 24GB if you can afford it. Apple's prices for this are quite high (like a convenience store). Many folks buy aftermarket RAM from Mac-centric vendors who can tell Users what modules will work in their Mac -- "guaranteed or your money back".
You can run as few as a single RAM module in 2009 and later Macs. So when adding, choose the densest modules you think you might EVER need, to avoid throwing away less-dense modules later.
You also will need at least one drive (preferably two) in addition to the Boot drive. Paging and program access to the boot drive wrecks drive access for User data.
You also need a Backup Drive. Big (but can be really slow).

Similar Messages

How much Ram do I need in a MacBook Pro for Software Engineering?

I plan to buy a new MacBook Pro in the next month for school and hopefully for work. I would like this computer to get me at least 4 years of use. I will be majoring in software engineering. My question is how much ram would I need in a Macbook Pro for software engineering? I am currenty looking at the 15" 2.3ghz base model with 8gb of ram as well as the 15" 2.4ghz base model retina. I really like the retina but its at my max budget. Will the 8gb of ram be enough since it is not upgradable? Any help will be greatly appreciated.

I am currenty looking at the 15" 2.3ghz base model with 8gb of ram
The MB Pro 15" 2.3Ghz with 8GB of RAM should do the trick.
Save your $$$ on the retina and stick to your budget

How Much Ram Do I Need To Run Logic Pro 9

Howdy.
I'm getting ready to do some recording and editing in Logic Pro 9. I'm running a 2011 iMac
2.7 GHz Intel Cor iS
Memory 8 GB 1333 MHz DDR3
I TB HD
OSX 10.6.8
Is 8 GB enough memory for Logic, or should I bump it up to 16 GB?
Thanks!

diaphones wrote:
To answer your question... Much of what I do invoves "raiding" the loop library and piecing things together. As time goes on, I'm getting more & more into original "progressive" type stuff. I'm not in a band nor am I affiliated with any other musicians, so I heavily dependent on loops.
I haven't had any memory issues (yet), but I just read something about freezing tracks taking some of the load off of memory.
If you're using mostly loops you have plenty of RAM.
Also, if you're not laying down a bunch of recorded audio tracks.. (like recording a band) your single TB hard drive should do fine. Freezing comes into play when the CPU is nearing load limit because of heavy use of software instruments and effects that demand a lot of CPU.
I would say for what you're doing at this time, your system is fine as it is.
If it ain't broke don't fix it.. if/when you run into a problem then deal with it, it's not like you're operating a commercial studio.
My suggestion would be to learn how to use Logic's effects correctly.. (Reverbs, Compressors, EQ, Delay...etc)
Use a Reverb or Delay on a bus, then several tracks and use the same effect, if you use all effects as inserts you're wasting CPU.
Learning how to use your system (as is) is FAR more important than how much RAM, what model Mac or how fast your CPU is.
A good engineer can make a world class recording in Garageband. Don't get to caught up in what you have or don't have.. have fun, be creative.

How much RAM will I need?

Considering buying a Macbook Pro, but I wanted to ask around and find out approximatly how much RAM I would need so that I dont get a model thats too powerful or too weak for my usage. I was considering 4 Gbs but im not sure if thats enough.
What im mainly planning to do on the Macbook is:
internet browsing (chrome, safari etc)
Mail app
Word processing software like Microsoft word
Eclipse (java programming)
skype
utorrent
Say I have all these programs running at the same time, how much RAM will I need to have?

Oh also, I just remembered wanting to ask this, have you ever tried downloading an OS update for a macbook and apple wont let you because you have outdated technology? Like trying to download ios 7 on an iphone 3G for example.
I've had that exact problem - someone gave me what was, supposedly, an iPhone 4s but turned out to be a 3Gs. Couldn't update to iOS 7.x so it just sits on my desk right now.
And when I had my MacBook Pro (1,1 2006 model) I couldn't upgrade to Lion - was 'stuck with' Snow Leopard.
O'd technology that no longer plays nice with new OS's? Time to get a new machine.
Clinton
Message was edited by: clintonfrombirmingham

How much RAM do I need in my new MacBookPro?

I think I need to add more RAM to my MacBook Pro. I've been using it for a couple of months now and I'm tired of running so slow. Things are fine until I have several applications open or whenever I try to run any Adobe Creative Suite programs.
So, my question is: how much RAM should I buy? My 1.83 MacBook Pro has the standard 512 MBs of RAM that came with it. I'd prefer to keep the cost low, so would buying one more 512 MB stick be enough? I am processing 8 Megapixel RAW images in Photoshop. Will 1 MB total be enough?
Also, do I have to have the two slots matched? Can I put a 1GB stick next to my 512 MB stick?
Thanks,
Laura

512+512 is better than 1gb + 0 - because of the ddr2 effect in the same way that 256+256 is better than 512+0, but not better than 512+256
512 + 1gb is better than 512 + 512 because you have more ram which outweighs the performance benefit of the two dimms.
The way to tell is to run activity monitor (from applications), click and hold the dock icon and turn it into a memory pie chart. You'll see how much ram you are using (tip - free ram is the total of free (green) + inactive (blue). If you are only occasionally running right out you might get by with 1gb total.
Also, economically, you'll be able to get a 512 for about $45-50 as people upgrade, whereas the 1gb chip will cost (at the moment - over $100 for generic and $150+ for one that is the same model as Apple supply - these prices do change and right at the moment there is a shortage of DDR2. - If you do want to buy one, post back and I can give you some hints on where and what to look out for). I'm awaiting a machine next week and will be posting 2 512's on craigslist in your(our) region, as do many others who upgrade so it's not a bad way to get ram - from another mbp owner who is upgrading to 2 x 1gb - and it's normally been tested for a few days.
Also, not a bad idea to have a look to see which chip Apple have put in their already and post back.
Best of luck.

How much RAM do I need to run FCP effectively?

As you can see below, I have an iMac 2.1 Ghz 20 in. (isight) w/ 512 MB of RAM, and I also have FCP, but have been experiencing some playaback framerate issues. So I have decided to upgrade my RAM to either 1 GB, 1.5 GB, or 2.5 GB... My question is how much RAM do you have and how well does it run. I know 2.5 GB's would be the ideal amount, but if I only need 1.5 GB then I would prefer to go with that and use the extra cash for new speakers.
Thanks, and I posted this over at the Final Cut Express board on accident so if any of you feel you have read this before... thats why.

Get an external hard drive - Firewire 400 min/ firewire 800 if your machine will support it.
Having media and the os on the same disk is a recipe for disaster.
x
Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
Also, don't forget to mark the thread Answered when you get enough information to close the thread.

How much ram do i need for serious video editing?

early 2008 2X2.8 Quad Core Intel Xeon Mac Pro, with 8 GB RAM (8X1GB sticks), 2 @ 1.5 TB hard drives +. Use Final Cut Express for video editing. CS4 for typical daily workflow. How much RAM do i really need to make this a powerhouse video editor?

To make any 'good' recommendations it would be helpful to know what you are editing - DV, SD, HD? That is a big factor in determining specifications.
If you do more than one stream of HD, you will eventually want an external video drive solution from CalDigit, Dulce, Promax, G-RAID, or any of the others you see on the side. And it also depends on what 'flavor' of HD - I doubt your running 1920x1080 uncompressed 10-bit HD off of one drive. an external RAID array might seem like overkill. Generally, the advantages are increased speed (necessary for dealing with uncompressed, high-res footage) and redundancy so you don't lose everything if a single drive dies.
Get AJA System Test to test the speed of your logical drives so you can get an estimate of what you are looking at.
You really DON'T want your OS and programs on the same drive as your media files. It'll cause performance bottlenecks and all kinds of grief.
Those WD 10K 300-600GB drive is perfect for your OS, applications, and swap files. That's ALL that you want to have on it, and add one or even two faster drives as a RAID 0 pair for more speed and space. Get at least one 7200RPM drive for video/graphics/etc.
For your video storage:
The hard drives you mentioned are fine for standard definition video. However, if you want to edit high definition or otherwise have complex / advanced ideas for your projects, you'll need something with higher read rates than just those single drives. This gets pricey, so depending on what you're intending to do, may not be appropriate for you.
During video CAPTURE your hard disks need to be able to write at a speed meeting or exceeding that video data stream. If other programs use the same disk you are saving too, then you have and increased change of missed writes to the drive. That is why they suggest having a seperate set of disks for capture. Not a bad idea.
*Strip size*
should be => 128K, I would use 256K. More importaint is cluster size. The default is 8 K which is good for the operating system plus programs as over 50% of the files are =< than 8K. For large files (is dot VOB can be 1 gig) it is not the best. When you write a large file each clustter contains a pointer to the next cluster that is to be read. I used 32K, or 64 K (at work so not sure) cluster size for my disk containing Pitures and video. The size of the file allocation table is also reduced by using the larger cluster size.
Back in 2007, this is what was recommended:
<a class="jive-link-external-small" href="http://">http://www.manifest-tech.com/mediapc/pc_syshd.htm
Compressor can do virtual clusters (you need at lest 2GB/core of RAM.
Apple Final Cut Pro
http://forums.creativecow.net/applefinalcutpro?view=s
Basics
http://forums.creativecow.net/applefinalcutbasics?view=s
Compressor - doesn't hold up well.
http://forums.creativecow.net/thread/20/865329
If you need to convert HD to SD, then you want hardware like the AJA Kona LHi or Kona 3 and those require a Mac Pro. If you go that route, get the fastest Mac Pro you can afford, minimum 8GB RAM, ATI 4870 card.
http://forums.creativecow.net/thread/200/888050
Final Cut Studio
http://discussions.apple.com/category.jspa?categoryID=123

How much RAM can I put into my Macbook Pro?

Here's my info:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          800 MHz
I want to upgrade my RAM, as the computer is showing a bit of age at 3 years old now. I looked at this support page:
http://support.apple.com/kb/HT1270#link8
And judged the installation to be easy enough for me to do, but I'm confused as to how much RAM I can buy. The conflict I see is that "Additional notes" says I can use up to 8GB of RAM, but the table says only 4GB. What's throwing me off is basic math -- is that 4GB only referring to my slots (thus 4+4=8) or is it saying that anything over 4GB will not be recognized by my computer?
I spoke with someone at Apple, but he seemed a bit confused by my question, and eventually gave me a "yes" that was timid enough that I felt the need to post here. So, I'd appreciate the support! Thanks a lot, everyone. I'm just looking to not spend more than I need (in terms of buying excess RAM), and make sure I don't ruin my Mac in the process.

The MacBook Pro 4,1 can acces a maximum RAM of 6GB
However RAM comes in 4GB modules and you have two slots, so you install 8GB (two 4GB modules) and can only access 6GB of it according to MacTracker.
Use the free Crucial.com site to make sure your getting the extact specified RAM specs, you can buy it anywhere if you like.
http://www.crucial.com/
(no comp)

How much RAM can PS CS4e use in Mac OS 10.5.x?

I've tried to track this down from a number of places, but can't get an answer. I'm assuming the same as CS3e, which is a little over 3 GB.
I'm getting ready to build a new MacPro and I need to decide how much RAM to add initially. I'm a Mac tech, so pretty good at building kick-but systems, but I don't have CS4e yet, so can't figure this one out for myself. I usually max out my systems, but I don't think I can really utilize a full 32 GB of RAM with CS4 suite, but perhaps CS5. No sense in getting more RAM at this point in time, when I could use those dollars for good glass to take more pictures with! ;-)
And FYI, real PS performance comes from using 10K rpm drives for startup/apps and a second one for Scratch.

Jerry,
That's a very important Tech Note. Thank you for pointing it out.
EXCERPT:
Allocating Memory with 64-bit Processors
Photoshop can directly access 3.5 GB of RAM when run on Mac OS (10.4.11 or later). If you have additional RAM on your computer, the RAM above 4 GB is used by the operating system as a cache for the Photoshop scratch disk data. Data that previously was written directly to the hard disk by Photoshop is now cached in this high RAM before being written to the hard disk by the operating system. If you are working with files large enough to take advantage of these extra 2 GB of RAM, the RAM cache can increase performance of Photoshop.
When you run Photoshop CS4 on a 64-bit operating system Photoshop can access up to 8 GB of RAM. You can see the actual amount of RAM Photoshop can use in the Let Photoshop Use number when you set the Let Photoshop Use slider in the Performance preference to 100%. The RAM above the 100% used by Photoshop, which is from approximately 3 GB to 3.7 GB, can be used directly by Photoshop plug-ins (some plug-ins need large chunks of contiguous RAM), filters, and actions. If you have more than 4 GB (to 8 GB), the RAM above 4 GB is used by the operating system as a cache for the Photoshop scratch disk data. Data that previously was written directly to the hard disk by Photoshop is now cached in this high RAM before being written to the hard disk by the operating system. If you are working with files large enough to take advantage of that extra RAM, the RAM cache can increase performance of Photoshop.

How much Ram can I add to my MacBook Pro?

Another non-techie here with a memory question
How much RAM can I add to my MacBook
Model Identifier: MacBookPro2,1
MacBook Pro (late 2006)
Processor 2.33GHz Intel Core 2 Duo
Current memory: 2GB (two SO-DIMMs) 667 MHz DDRs SDRAM (PC2-5300)
The actual installation sounds quite simple. I just want to be sure I get the right chips. Any sources you can recommend?
TIA
Jim

http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .33-17-specs.html
3 gb of ram as two modules of 2 gb each.
Try http://www.macsales.com/

How much RAM do I need to use Mavericks?

Happy am I with my iMac from mid-2011. With 4 GB of RAM, it runs Mac OS X v10.8.5 well. :-)
Daily I use my iMac to work the crossword puzzles from the New York Times, to send & to receive email, and to watch Rush Limbaugh.
I _know_ that I must Upgrade to Mavericks _someday_ but for example, how much more RAM would I need? Thank you.
P. S. I wrote, "I must Upgrade to Mavericks someday" because I need to keep current. But _rarely-indeed_ do I need help [with my iMac :-) ].

The requirement is a minimum of 2 GBs. A minimum of 15 GBs of free space on the hard drive.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

ML, Parallels (Aspen Hysys) and multi-display. How much RAM do I need?

Hello, I'm a proud owner of a 13-inch Mid '10 MB with a 2.4 Intel Core 2 Duo Processor.
I recently upgraded my machine with a 250 GB Samsung 840 SSD and bought an enclosure for my original 250 GB HDD to sit on.
I'm in ML 10.8.3 and need to use Parallels to run Aspen HYSYS in a 64-bit Windows 7 Ultimate edition and I'm planning to use a second display to run Aspen Hysys while using normally ML (Google Chrome, Mail, Excel and Word) in my MB.
I actually have 2 GB of RAM in my MB and I'm planning to upgrade it so I can run smoothly Parallels and use both displays.
I've read tons of times that this MB can handle 8 GB and even 16 GB RAM from OWC, but I think the 2x8 GB RAM is too expensive.
Can my MB run smoothly with 8 GB all the features mentioned above, or should I make an effort and get the 16 GB RAM?
Thanks.

It's really difficult to interpret some posts because
acceptable performance to some is unacceptable to
others.
Good point. To be more precise about my post when using 4GB and running Aperture and CS3 with Activity monitor also running to show me memory use I found that I was running out of available memory and noticing a consequent slow down about 30% of the time. Most of the time (aproximately 70%) the 4GB seemed to be sufficient.
I should note that this did not include much work in CS3 with large layered files. Since I expect to have more large files working in Photoshop in the next few months I jumped to 8GB. I have only had a couple of weeks with that configuration but my impression now is that I am virtually never seeing a slow down due to using up all the available RAM.
The performance of my system even with 4GB and running slightly slower might have been acceptable to some. I thought I could afford the upgrade and went for it. Partially that was because I think that the Mac Pro is the best desktop computer that Apple has ever made and I am likely to be holding on to this one for a bit longer than my usual 18-24 months.

How much RAM do i need?

I am preparing to buy an iMac or Mac Pro for home music production. I could stretch my budget to a Mac Pro, but with my sensible head on i should get an iMac. Someone told me an iMac would be sufficient but 'be sure to max out the RAM'. Its an extra £800/$1000 to max out the RAM. At that cost it makes more sense just to get a Mac Pro where i can get the same 8GB for just £200/$250 more.
As a home producer, using Logic, Komplete 6, Melodyne plug-in/editor and various other plug-ins, do i really need 8GB? Wouldn't a 2.93GHz iMac with 4GB RAM be more than enough?

One key advantage of the Mac Pro (other than pure performance and max RAM), when disk access speed is important, is the capability to have up to four internal SATA drives. So you can separate the OS and apps from where the data is stored, increasing efficiency and performance. On an iMac, you have one internal SATA drive, so you either use it for the OS, apps, and data storage, or you use the FireWire 800 port for external storage. FireWire 800 is reasonably fast and may be fast enough for your purposes, but it is slower than SATA.
If you go get an iMac, DO NOT get it with 8GB of RAM pre-installed. Get it with the standard 4GB of RAM. If you decide you actually need 6GB or 8GB, you can upgrade it for much less. For example, OWC sells a kit with two matched 4GB modules for $476.
http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S8GP/
I'm sure there are other quality vendors with similar prices. Plus you get to keep the original pair of 2GB modules. When you sell the iMac later, you can put the originals back and sell the 4GB modules separately, getting back part of your investment.

How much RAM can i put in my MacBook Pro 13inch?8GB or 16GB?

I want to upgrade the RAM in my MacBook Pro and wanted to know how much is possible technically. I read 16GB are possible but Apple says 8GB optional.What is right?16GB or 8GB

Welcome to the Apple Support Communities
You have a Mid 2012 MacBook Pro. Apple says that it only supports 8 GB of memory, but the truth is that you can install up to 16 GB (2x8 GB) of memory on a Mid 2012 MacBook Pro.
If you want 16 GB of memory, you can buy memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility as OWC). If you need help installing memory > http://support.apple.com/kb/HT1270#link1

How much ram should i put in my mac mini mid-2011?

Hello, so i have a mid-2011 mac mini intel i5 2.3GHz with 2gb of ram and sometimes its kind of slow.. I've searched on OWC for ram and found 4gb (2x2gb) for about 58$ and 8gb (2x4gb) for 105$. I am an high school student that does a lot of pages documents, garageband and imovie projects, iphoto editing and i sometimes use xcode. Should 4gb of ram be sufficient or it would be better if i had 8gb? Well, i know that more ram is always better, but would 4gb make a lot of difference from my 2gb?

You can get a 120GB Samsung SSD on Amazon for $90. Put your movies and music on an external drive since it doesn't matter how fast you read/write those. You can take your current internal drive and put it in an external enclosure for $15.
For the money, this will give you the biggest performance improvement.
But, if you still want to upgrade your RAM, you can go to the Activity Monitor app, Memory tab, and look at "Swap used" in the lower left corner. That will tell you how much data *would* be stored in memory if you upgraded. Check this number next time your computer is running slow. If it's 2GB or less, then you wouldn't benefit at all from > 4GB total memory. Currently I "only" have 4GB of memory in my Mac Mini and I'm running a bunch of stuff and I'm using zero swap, so I would get literally no benefit from more RAM.

How Much RAM Do I Need in a Mac Pro to edit together hour-long videos for our church?

Similar Messages

Maybe you are looking for