How Much Ram does AME CS5 use for an average HD Encode?

Hello,
I know this is a tough question but I would like to learn what factors control or limit the performance of AME CS5.
I have 12GB of ram in my Windows 7 64bit system but AME CS5 will only use 3 GB when encoding and HD file to say Mpeg-2.
Is 3GB all it needs? Would more ram do anything to speed up the encoding?
I know that encoding is largely a CPU intensive task but after experimenting with RAID 0, I discovered disc read speed makes a large difference in the encoding time. So I would like to know if ram plays any part in encoding time?
Thanks

Thanks for your reply.

Similar Messages

OK, So How Much RAM Does Photoshop CS5 Use?

ANSWER: All you give it, lol!
I posted this for those buying or building a PC and are deciding "how much RAM do I need?"
I built a fairly powerful rig for Photoshop and editing in Premiere Pro, and without all the tech specs, I have 24GB of ram, mostly for encoding HiDef video. Surely Photoshop wouldn't eat THAT much, right? Dead wrong. I have Photoshop set to utilize 75% of my available ram which would be near 19GB. I just worked on a fairly large image, where I took 23 vertical shots with my 5D Mark II (5616x3744 resolution files, pretty big) and did a large photomerge which ended up at about 60,000 x 5,500 after the crop. Granted, large image, nearly 3½GB .PSB file. So while the merging and aligning was taking place, I watched my Ram Gadget soar, right up to 19GB within 4 minutes of processing:
Yowza. I expected that from Media Encoder processing 1080p HD video into a Blu-Ray disc format, but not a Photoshop file. So, the point of all this: ram is lower in cost than it's been in many months, a 12GB Mushkin kit (3x4GB) is down to $169 on Newegg. Don't skimp in that arena, fill 'er up as best as you can. Future versions aren't going to use less ram, let's face it, the software has to process a lot of pixels! Try to go a minimum of 6GB, but definitely 8-12GB if you can. Of course this means bye-bye FINALLY to 32-bit operating systems, but once you have a large playground of memory, you and Photoshop will be happy campers.

I purposely waited to respond so I wouldn't write things I'd regret later:
"Nice system."
Huh? I didn't list my system on purpose. The point wasn't showing off gear, it was PS's use of RAM.
"With regard to RAM and Photoshop, people often say more is better without qualification, and you have just confirmed that advice."
You actually have no evidence of my qualifications. I'll send you a link to my Microsoft transcript if you'd like, there are 16 certifications you can peruse.
"Personally, with 24 GB of RAM I'd suggest settting Photoshop's limit even higher - e.g., to 95% (which is what I use for 8 GB) ... The OS doesn't need much on that scale."
24GB x 95% = 22.,8GB... that leaves 1.2GB of RAM for everything else including Windows 7 64 bit. I'm sorry, that's an extremely unwise choice. Noel, maybe you need to remove the "unqualified" beam from your own eye before you point it out in others.
If anyone is reading this please PLEASE don't set your Photoshop limit to 95% of your available ram. Your system will mostly likely crash within minutes of starting Photoshop. The proven setting is 75%, set it there and move on. Thanks.

I do a lot ofhow much RAM does ps cs5/6 ext use with CAF?

how much RAM does photoshop cs5 extended use with Content-Aware-Fill?
please state the size of the image, how many layers you have (makes a difference).
please do this for 2 different size images.
I could also use some cs6 numbers as well, since this is the current ps.
should be as simple a psd as possible.
I need to know for a 32-bit and a 64-bit machine.
I would like to use these two numbers for making a calculator that does some very basic calculations as to how much memory would be required to run photoshop given:
image size
content-aware fill
radial blur
number of layers
content-aware move (in CS6)
this means several types of test plans:
32-bit ps ext CS5:
different image sizes SMALL and LARGE (these sizes will be used throughout the tests below, save them as PSD's)
SMALL and LARGE with 2 layers
SMALL and LARGE with content-aware fill, like taking out a telephone pole. hit F1 if you don't know how.
SMALL and LARGE with radial blur (this takes a while to run). hit F1 if you don't know how or refer to this: http://ksimonian.com/Blog/2010/02/24/improved-photoshop-benchmark-cpu-speed-test-for-both- mac-pc-free-radial-blur-filter-test/
SMALL and LARGE with content-aware fill and then radial blur (this takes a while to run). this step is purely optional.
64-bit ps ext CS5:
different image sizes SMALL and LARGE (these sizes will be used throughout the tests below, save them as PSD's)
SMALL and LARGE with 2 layers
SMALL and LARGE with content-aware fill, like taking out a telephone pole. hit F1 if you don't know how.
SMALL and LARGE with radial blur (this takes a while to run). hit F1 if you don't know how or refer to this: http://ksimonian.com/Blog/2010/02/24/improved-photoshop-benchmark-cpu-speed-test-for-both- mac-pc-free-radial-blur-filter-test/
SMALL and LARGE with content-aware fill and then radial blur (this takes a while to run). this step is purely optional.
32-bit ps ext CS6:
different image sizes SMALL and LARGE (these sizes will be used throughout the tests below, save them as PSD's)
SMALL and LARGE with 2 layers
SMALL and LARGE with content-aware fill, like taking out a telephone pole. hit F1 if you don't know how.
SMALL and LARGE with radial blur (this takes a while to run). hit F1 if you don't know how or refer to this: http://ksimonian.com/Blog/2010/02/24/improved-photoshop-benchmark-cpu-speed-test-for-both- mac-pc-free-radial-blur-filter-test/
SMALL and LARGE with content-aware fill and then radial blur (this takes a while to run). this step is purely optional.
SMALL and LARGE with content-aware move
64-bit ps ext CS6:
different image sizes SMALL and LARGE (these sizes will be used throughout the tests below, save them as PSD's)
SMALL and LARGE with 2 layers
SMALL and LARGE with content-aware fill, like taking out a telephone pole. hit F1 if you don't know how.
SMALL and LARGE with radial blur (this takes a while to run). hit F1 if you don't know how or refer to this: http://ksimonian.com/Blog/2010/02/24/improved-photoshop-benchmark-cpu-speed-test-for-both- mac-pc-free-radial-blur-filter-test/
SMALL and LARGE with content-aware fill and then radial blur (this takes a while to run). this step is purely optional.
SMALL and LARGE with content-aware move
if you know of a more memory-intensive operation, such as radial blur (maybe that's only cpu-intensive), I would be interested in knowing about this.
if you know of a more memory-intensive operation, such as radial blur (maybe that's only cpu-intensive), I would be interested in knowing about this.
the number of layers seem to multiply the RAM required in CS5. I think. the amount of RAM required to do photoshop seems to be a much-talked about subject and the subject of much variableness, and I wanted to nail it down a little.
I thought I would make a calculator that can estimate the amount of RAM required for a system to do, say, multilayer gigapixel content-aware-fill stuff in ps, something I know I would do a lot of. I also hear RAM requirements has changed in CS6. it would be interesting to characterize it.
I am making it here: http://Jesusnjim.com/calculators/photoshop-ram-usage.html
and as soon as I can get some completed set of numbers infor CS5 or , it will be ready
you can tell how much memory us in use by doing [windows-logo-flag-key]taskmgr[Enter] or doing ctrl-alt-del and bringing up the task manager,
clicking on the prcesses tab,and looking for Photoshop.exe
if you don't see mem usage, do View,Select columns.
it's a lot of testing, I know, it should not take too long to finish. but I think it might help a lot of folks when they are trying to figure out how to spec their PS box.
Jim Michaels
something automatically hit the send button before I could finish.
Message was edited by: jmichae1

the numbers basically would form a linear graph in memory usage when it comes to things like
number of layers
image size
I am not throwing away my data because someone is poo-pooing it.
CAF is just an 11x multiplier in every case I have used it. I am curious what the cs6 new content-[fill-in-the-blank] features use for memory. and I probably can't get anyone else to test it for me, because nobody seems to know how that I have met on the forums except me (I have been doing testing for 27 years and design/development for as long as I can remember - am I getting that old?).
the numbers in these cases are linear, for initial operations (I should qualify that on the page). as you said (according to my numbers), subsequent ops cause increased memory usage. I see this in soundbooth, to the point of out of memory error and crash.
I didn't do graphs because I didn't think it was worth it. I have proved my point to myself.
I think looking back I should have expressed more of what I found (and you guys have just stated it). page editing takes a lot of thought. I guess I missed that 1 necessary thing I noticed and didn't pay enough attention to - ps RAM usage growth from ops doesn't quit until you close it.
found out ps ram usage is not a compendium of all the features (maybe the major ones). the filters use pretty much no noticeable RAM.
adjustments don't either I don't think (haven't tested that).
I just want to help others who are trying to size a new box and don't know how much RAM to get if they are doing a 40x27 poster. and which type of machine: a desktop, laptop, or workstation (which can handle more memory). and which OS (windows 8 handles 512GiB max, windows 7 handles 192GiB max, windows server standard handles multi-terabytes of RAM). why? because I have to size one for myself! and I have some large images I will be working with.
Memory Limits for Windows Releases (Windows)
very few people know about this memory limitation on windows, but it's keenly felt when someone is buying a workstation. microsoft publishes the memory limits on its software for issues like this.

How much RAM do tab groups use (on average)? Do I need to watch out for how many groups I create?

I may have gone overboard in the creation of Tab Groups. I say this because now my system is beginning to act a bit sluggish. I created 7 groups, two of which have 9 or 10 tabs. Should I pull back on the number of groups I create (as well as how many tab are located within each group). That is: How much RAM do tab groups use. How can I calibrate or understand the trade off between these markers and the amount of RAM they use?

You can see the memory usage on the about:memory page.
You can open about: pages via the location bar like you open a website.

How much data does google maps use

how much data does google maos use ?

That question has a lot of variables. If you are just looking up an address it should not using very much. If you are using it for an 8 hour drive it will use quite a bit.

How much space does a blob use?

How much space does a BLOB use?
Does it use allocated anyspace if its empty?

It will size appropriately:
TEST.SQL>CREATE TABLE TBLOB
2 (
3 A BLOB
4 ) TABLESPACE _SANITIZED_;
TABLE CREATED.
TEST.SQL>SELECT INITIAL_EXTENT FROM DBA_TABLESPACES WHERE TABLESPACE_NAME='_SANITIZED_';
INITIAL_EXTENT
       5242880
TEST.SQL>SELECT * FROM DBA_EXTENTS WHERE SEGMENT_NAME='TBLOB';
OWNER                          SEGMENT_NAME                                                                      PARTITION_NAME                 SEGMENT_TYPE
TABLESPACE_NAME                 EXTENT_ID    FILE_ID   BLOCK_ID      BYTES     BLOCKS RELATIVE_FNO
YJAM                           TBLOB                                                                                                            TABLE
_SANITIZED_                                  0         16    1201289    5242880        640           16
TEST.SQL>SELECT * FROM DBA_OBJECTS WHERE CREATED > SYSDATE-1;
OWNER                          OBJECT_NAME
SUBOBJECT_NAME                  OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE        CREATED LAST_DDL TIMESTAMP           STATUS T G S
YJAM                           SYS_LOB0000920875C00001$$
                                   920876         920876 LOB                14:41:36 14:41:36 2005-11-16:14:41:36 VALID   N Y N
YJAM                           TBLOB
                                   920875         920875 TABLE              14:41:36 14:41:36 2005-11-16:14:41:36 VALID   N N N
TEST.SQL>SELECT * FROM DBA_EXTENTS WHERE SEGMENT_NAME='SYS_LOB0000920875C00001$$';
OWNER                          SEGMENT_NAME                                                                      PARTITION_NAME                 SEGMENT_TYPE
TABLESPACE_NAME                 EXTENT_ID    FILE_ID   BLOCK_ID      BYTES     BLOCKS RELATIVE_FNO
YJAM                           SYS_LOB0000920875C00001$$                                                                                        LOBSEGMENT
_SANITIZED_                                  0         16    1202569    5242880        640           16
TEST.SQL>DECLARE
2    VALINS VARCHAR2(4000);
3 BEGIN
4    VALINS:='1';
5    FOR I IN 1..100000
6    LOOP
7      INSERT INTO TBLOB VALUES (RPAD(VALINS,4000,'0'));
8    END LOOP;
9 END;
10 /
PL/SQL procedure successfully completed.
TEST.SQL>COMMIT;
Commit complete.
TEST.SQL>SELECT * FROM DBA_EXTENTS WHERE SEGMENT_NAME IN ('SYS_LOB0000920875C00001$$','TBLOB');
OWNER                          SEGMENT_NAME                                                                      PARTITION_NAME                 SEGMENT_TYPE
TABLESPACE_NAME                 EXTENT_ID    FILE_ID   BLOCK_ID      BYTES     BLOCKS RELATIVE_FNO
YJAM                           TBLOB                                                                                                            TABLE
_SANITIZED_                                  0         16    1201289    5242880        640           16
YJAM                           TBLOB                                                                                                            TABLE
_SANITIZED_                                  1         17    1169929    5242880        640           17
YJAM                           TBLOB                                                                                                            TABLE
_SANITIZED_                                  2         18    1163529    5242880        640           18
YJAM                           TBLOB                                                                                                            TABLE
_SANITIZED_                                  3         19    1176969    5242880        640           19
YJAM                           TBLOB                                                                                                            TABLE
_SANITIZED_                                  4          5     379529    5242880        640            5
YJAM                           TBLOB                                                                                                            TABLE
_SANITIZED_                                  5         14     375689    5242880        640           14
YJAM                           TBLOB                                                                                                            TABLE
_SANITIZED_                                 51         18    1172489    5242880        640           18
YJAM                           TBLOB                                                                                                            TABLE
_SANITIZED_                                 52         19    1191689    5242880        640           19
YJAM                           SYS_LOB0000920875C00001$$                                                                                        LOBSEGMENT
_SANITIZED_                                  0         16    1202569    5242880        640           16
54 rows selected.
TEST.SQL>ANALYZE TABLE TBLOB COMPUTE STATISTICS;
Table analyzed.
TEST.SQL>SELECT * FROM DBA_TABLES WHERE TABLE_NAME='TBLOB';
OWNER                          TABLE_NAME                     TABLESPACE_NAME                CLUSTER_NAME                   IOT_NAME                         PCT_FREE   PCT_USED
INI_TRANS MAX_TRANS INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS MAX_EXTENTS PCT_INCREASE FREELISTS FREELIST_GROUPS LOG B   NUM_ROWS     BLOCKS EMPTY_BLOCKS AVG_SPACE CHAIN_CNT
AVG_ROW_LEN AVG_SPACE_FREELIST_BLOCKS NUM_FREELIST_BLOCKS DEGREE     INSTANCES CACHE TABLE_LO SAMPLE_SIZE LAST_ANA PAR IOT_TYPE     T S NES BUFFER_ ROW_MOVE GLO USE
DURATION        SKIP_COR MON CLUSTER_OWNER                  DEPENDEN COMPRESS
YJAM                           TBLOB                          _SANITIZED_                                                                                               10
         1        255        5242880     5242880           1 2147483645            0                            YES N     100000      33547          373       1977          0
       2042                         0                   0          1          1     N ENABLED       100000 14:51:22 NO               N N NO DEFAULT DISABLED NO NO
                DISABLED NO                                 DISABLED DISABLED
TEST.SQL>SELECT BYTES/1024 FROM DBA_SEGMENTS WHERE SEGMENT_NAME='TBLOB';
BYTES/1024
    271360
TEST.SQL>TRUNCATE TABLE TBLOB;
Table truncated.
TEST.SQL>BEGIN
2    FOR i IN 1..100000
3    LOOP
4      INSERT INTO TBLOB VALUES ('1');
5    END LOOP;
6 END;
7 /
PL/SQL procedure successfully completed.
TEST.SQL>COMMIT;
Commit complete.
TEST.SQL>ANALYZE TABLE TBLOB COMPUTE STATISTICS;
Table analyzed.
TEST.SQL>SELECT BYTES/1024 FROM DBA_SEGMENTS WHERE SEGMENT_NAME='TBLOB';
BYTES/1024
      5120Note: there is a deported blob segment for the pointers I forgot in my previous post.
HTH,
Yoann.
Message was edited by:
Yoann Mainguy
Hmm, forgot that for a full comparison of the avg linesize:
TEST.SQL>SELECT * FROM DBA_TABLES WHERE TABLE_NAME='TBLOB';
OWNER                          TABLE_NAME                     TABLESPACE_NAME                CLUSTER_NAME                   IOT_NAME                         PCT_FREE   PCT_USED
INI_TRANS MAX_TRANS INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS MAX_EXTENTS PCT_INCREASE FREELISTS FREELIST_GROUPS LOG B   NUM_ROWS     BLOCKS EMPTY_BLOCKS AVG_SPACE CHAIN_CNT
AVG_ROW_LEN AVG_SPACE_FREELIST_BLOCKS NUM_FREELIST_BLOCKS DEGREE     INSTANCES CACHE TABLE_LO SAMPLE_SIZE LAST_ANA PAR IOT_TYPE     T S NES BUFFER_ ROW_MOVE GLO USE
DURATION        SKIP_COR MON CLUSTER_OWNER                  DEPENDEN COMPRESS
YJAM                           TBLOB                          _SANITIZED_                                                                   10
         1        255        5242880     5242880           1 2147483645            0                            YES N     100000        628           12       1223          0
         41                         0                   0          1          1     N ENABLED       100000 14:56:56 NO               N N NO DEFAULT DISABLED NO NO
                DISABLED NO                                 DISABLED DISABLED

How much ram does the iPhone 6 Plus have?

How much ram does the iPhone 6 Plus have?

This is what I got on the info....
IPhone’s RAM has been very little, even pitiful compared to other flagships. Now 1GB RAM is still the standard configuration for the current iPhone 5 / 5s and iPhone 6.
Is Apple’s system optimization can really never need to increase the memory capacity? Obviously the answer is no. Recently, GSMArena published a sheet of iPhone 6 Plus detailed specifications, we can clearly see the “2GB RAM” in the memory list.
GSMArena also posted the benchmark score for iPhone 6 yesterday, but we seen that A8 GPU not seem to improve a lot in the processing capability compared to A7 – only increased 4.65%.
Apple usually not declare the detailed hardware parameters of their products, because those indicators not have too many advantages compared to other similar products, and even looks a bit shabby. But for Apple, these are not the most important, the company always focusing on the overall performance and user experience of the product. iPhone 6 Plus is the largest ever. Apple has said the iPhone 6 Plus screen reached 1080P in the event, as a larger screen means more resource consumption, and the processor needs to handle higher pixel image, so increasing RAM is the best choice to enhance stability and performance.
So based on the above evidence and our speculate, iPhone 6 is indeed possible with 2GB RAM. If in doubt, all we could wait is finding out the truth after dismantling the device. Course this just may be a beginning, we also expect Apple can give more memory for the upcoming next-generation iPad and iPad Mini.

How much time does it usually takes for moderator approval for a post

How much time does it usually takes for moderator approval for a post?
I have a post posted on Mar 9 and it is still pending for moderator approval.

It's impossible for anyone here to say. It could be very quick, or a given book may never appear. As RG said, it's completely up to the publisher in the applicable country.
Regards.

How do I find out how much disc space I'm using for various items such as Mail, iPhoto, iTunes, documents, etc.

how do I find out how much disc space I'm using for various items such as iPhoto, Mail, Apps, documents, etc ? thanks

Or you can download OmniDiskSweeper (free). It will list your disc usage in order of size and you can follow the paths to find individual files or applications.

How much ram does your lightroom consume ?

Hi
how much ram does your lightroom consume ?
to me 160mb but I have seen it up over 230mb while doing work
does abode plain to increase the cache like Bibble , Phase one or SILKYPIX Developer to be more light??

Currently sitting at about 1.8GB (real) 2.5GB (virtual), but then it's working rather than idle. At idle it drops to around 15MB (real) and 270MB (virtual).

How much RAM does a standard IPAD come with?

How much RAM does a standard IPAD come with?
<Edited by Host>

iPad 1: 256MB
iPad 2: 512MB
iPad 3: 1GB
iPad 4: 1GB
iPad Air: 1GB

How much HD's can I use for my Xserve G5 RackMac3,1

How much HD's can I use for my Xserve G5 RackMac3,1 and with ??? TB?
Thanks

Hi
Not quite sure what you mean by "how much?" If you really mean 'how large' then Apple's Support Article might help?
http://support.apple.com/kb/HT1219
Failing that and if you browse this Forum, you'll find some people have had some success with 3rd-Party 1TB (and perhaps larger) SATA drives:
https://discussions.apple.com/thread/2702491?tstart=120
XServe G5 takes up to a maximum of 3 drives. You must use Apple's own Drive Modules. If you want to configure the internal drives as a RAID 5 (minimum of 3 drives required) you will need a compatible RAID Card installed.
Your mileage as ever will vary.
HTH?
Tony

How much RAM should be in use while not running anything?

Just for the heck of it, I checked the Activity Monitor with nothing else open to see how much RAM was being used. Much to my surprise, nearly 900MB of my 2GB was being used with literally every application closed except for Activity Monitor. This can't be normal...

My Macbook Pro is also using about 1.3GB RAM with virtually everything shut down (mail, safari, ical, itunes, etc). Yet, my husbands uses only about 400-500MB with the nearly identical applications left running.
I have 4GB, he has 2GB.
We compared the running applications one-by-one, and mine uses nearly double his for the exact same application.
Does a laptop use more memory if it has more memory to use?
This really bothers me. There does not seem to be any reason for mine to be consuming more RAM when running the same small applications as his does yet I can't figure out why?
Ahhhhh!

How much RAM can PS CS4e use in Mac OS 10.5.x?

I've tried to track this down from a number of places, but can't get an answer. I'm assuming the same as CS3e, which is a little over 3 GB.
I'm getting ready to build a new MacPro and I need to decide how much RAM to add initially. I'm a Mac tech, so pretty good at building kick-but systems, but I don't have CS4e yet, so can't figure this one out for myself. I usually max out my systems, but I don't think I can really utilize a full 32 GB of RAM with CS4 suite, but perhaps CS5. No sense in getting more RAM at this point in time, when I could use those dollars for good glass to take more pictures with! ;-)
And FYI, real PS performance comes from using 10K rpm drives for startup/apps and a second one for Scratch.

Jerry,
That's a very important Tech Note. Thank you for pointing it out.
EXCERPT:
Allocating Memory with 64-bit Processors
Photoshop can directly access 3.5 GB of RAM when run on Mac OS (10.4.11 or later). If you have additional RAM on your computer, the RAM above 4 GB is used by the operating system as a cache for the Photoshop scratch disk data. Data that previously was written directly to the hard disk by Photoshop is now cached in this high RAM before being written to the hard disk by the operating system. If you are working with files large enough to take advantage of these extra 2 GB of RAM, the RAM cache can increase performance of Photoshop.
When you run Photoshop CS4 on a 64-bit operating system Photoshop can access up to 8 GB of RAM. You can see the actual amount of RAM Photoshop can use in the Let Photoshop Use number when you set the Let Photoshop Use slider in the Performance preference to 100%. The RAM above the 100% used by Photoshop, which is from approximately 3 GB to 3.7 GB, can be used directly by Photoshop plug-ins (some plug-ins need large chunks of contiguous RAM), filters, and actions. If you have more than 4 GB (to 8 GB), the RAM above 4 GB is used by the operating system as a cache for the Photoshop scratch disk data. Data that previously was written directly to the hard disk by Photoshop is now cached in this high RAM before being written to the hard disk by the operating system. If you are working with files large enough to take advantage of that extra RAM, the RAM cache can increase performance of Photoshop.

How much Ram can my Macbook use? What Hard drive should I upgrade to?

Hi Everyone.
I have a 2008 ish macBook with 4gb of Ram. I use vmware Fusion to run Windows every day and I also use Aperture on a regular basis.
I'm looking to breath some life into this old machine and want to know how much ram the motherboard will support. Here are the machine's specs.
Hardware Overview:
Model Name:          MacBook
Model Identifier:          MacBook4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          800 MHz
Boot ROM Version:          MB41.00C1.B00
How muck Ram will the machine support?
My Hard drive is also nearly full and I would like to upgrade to a 500gb drive. Any suggestions on which drive to choose?
Thanks!!

You can install up to 6 GBs of RAM. There are any number of good choices for a hard drive replacement. I suggest visiting OWC for information on pricing, makes, and models. They also provide video tutorials on how to replace a drive in MacBooks.
To prepare for the upcoming release of Lion I also suggest spending $29 to buy a Snow Leopard DVD and upgrade your OS.

How Much Ram does AME CS5 use for an average HD Encode?

Similar Messages

Maybe you are looking for