How much RAM in my iMac?

I am sitting with a 20 inch iMac, with a 2.16 Ghz Core 2 Duo CPU.
Has anyone installed 4 GB or 3 GB of RAM in this model?
Would appreciate any advice based on your experiences.
Thank you

I mainly use it for everyday tasks, but sometimes I indulge in a bit of video editing followed by iDVD creation of DVDs. It's not that I feel I need more RAM, but RAM is so inexpensive these days, I just thought I'd stuff it as full of memory as it can get.
If it can only use 3 GB even if I have 4, I might just as well get one 2 GB chip and put in there. No point in having 4 if 1 GB is just gonna sit around doing nothing.
Message was edited by: Freddy Johansen

Similar Messages

How much ram can my iMac take?

Hi all, just bought a iMac a few days ago and I'm just wondering how much ram can it take as I want to upgrade it. It didnt come with a manual, so I don't know.
Here's the spec so far
Early 2008 20"
Processor 2.4 GHz Intel Core 2 Duo
Memory 2 GB 667 MHz DDR2 SDRAM
Graphics ATI Radeon HD 2400 XT 128 MB
Software OS X 10.8.2 (12C60)
Thanks for any help in advance

There are two answers: the official Apple answer and the "you're on your own" answer.
1 - For the official iMac max RAM, see iMac Memory specifications and upgrades
2 - For the "your're on your own" answer, everymac.com has a list of the Actual Maximum RAM you can put in every model Mac. In many cases this is more than the official maximum RAM.
After deciding how much RAM you want to put in your iMac, I suggest going to Crucial.com and use the memory advisor or system scanner to see what RAM modules are compatible with your iMac.

How much ram will my iMac hold?

How do I find out what the max RAM my Mac will hold and what type of RAM it takes?

Or if you prefer to do it yourself, you can download a scanner from crucial.com which will scan your Mac and send a report back to Crucial for analysis. They will then tellyou all of the option available for your Mac.
Allan

For a new imac how much ram should i get?

If I buy a new iMac, I see that one can get it with 16GB or even 32GB RAM. dMy 2007 iMac has 4 GB now after I upgraded? What would the difference be?

My 10 cents worth:
The minimum configurable amount of memory of a new iMac is 8Gb But...
If you are looking at a new upgradable iMac, absolute do NOT buy the Apple RAM upgrades at the time of purchase. It is grossly overpriced, and although good quality and reliable (I've been led to believe) you can buy just as good, if not better for a lot less. I wouldn't look further than OWC (http://eshop.macsales.com/shop/apple/memory/) or Crucial (http://www.crucial.com/). Both offer matched pairs and kits that are guaranteed to work with your iMac and as you will see, cost a lot less than Apple. Don't be fooled by the price, they supply good quality, fast memory.
Secondly, in terms of how much RAM, the question is, what is your budget? I always believe that if you can afford it (and memory nowadays isn't that expensive) max out your system and then forget about it because:
a) There's a fair chance that you'll be upgrading it again at some point if you don't max it out.
b) You are releasing the maximum potential of your iMac (in terms of memory performance, although the jump from 16Gb to 32Gb will not be as significant as the jump from 8Gb to 16Gb))
c) If you sell it, the extra RAM will be an attractive option for any buyer.

How much RAM should I add to my 2008 iMac?

Hi everybody,
I currently own an 20-inch Early 2008 iMac, and I was wondering what would be the best RAM upgrade for what I use the computer for. At the moment, I have 2GB of RAM and I'm running Mavericks, and I can tell that it isn't as fast as Snow Leopard. I use the computer for mostly video editing on Final Cut and sometimes iMovie, and also a little Photoshop here and there.
My question is: How much RAM should I buy (and from who) in order to speed up my iMac so that it can handle these programs without being painfully slow.
Thank you!

Your machine came with two 1GB RAM modules. The most it can take is a total of 6GB, by buying one 2GB and one 4GB module. Don't be tempted to buy these on the cheap, go with Crucial, OWC (macsales) or Ramjet. This will cost about $140. You will see an improvement if you only buy two 2GB ($65) and go to a total of 4GB, but I think you will see a significant additional boost by going to 6GB. The apps you are using can REALLY make use of all the RAM they have access to.

How much ram and processing power in my imac will meet my graphic design needs?

Hi,
I'm in the market for a new imac. I'm trying to figure out how much ram I'll need and which processor will be sufficient for my graphic design needs.
I'm gonna need it to be robust enough to have InDesign, Photoshop, and Illustrator open at once along with spotify, safari with many tabs open, and a couple other apps including evernote and game from time to time. Also, I'm gonna be managing a good deal of fonts in font explorer. How much ram and processing power will I need in my imac to keep everything snappy with all these apps going at the same time?
Any advice on this would be much appreciated. Feel free to include any other relevant information you think I should know.
Thanks, Nick

Computers are out of date when you open the box
Ok, getting serious, that iMac should be a viable workhorse for what you want for a good five years, and taht depends on how much ram you put in it, add really fast external storage, and so on.
Didn't throw this in earlier so as to not influence the discussion: my daughter is the senior art director, VP, at a graphics design firm in NYC. Has been in the business for a number of years. When she changed out her Mac at work, bought, or company bought, the 27" iMac model just before the latest, with maxed out CPU/GPU, and storage. They maxed the memory to 32 GB for her, then added a 30" Apple cinema display so she has almost 5' of display in front of her. There is nothing she cannot have open all spread across that display area. She works almost exclusively in print media, occassionally condescends to do web stuff. And has a massive array of RAID drives hanging on it. But that is a setup an individual would be hard pressed to go with.
At home she uses a MacBook Pro with top cpu and display but that is all.
The point, just how massive do you want to go depends on how fast you have to work; in the office where time is money you need tons of horsepower. At home, you scale it to your abilitty to juggle other tasks at the same time.
I think your choices have been great, the discussion has focused on what is important and especially what can and cannot be changed in the future.
Best of luck setting this up.

How much ram can i max out on imac 20 (2009 model)

*Hi i have a APPLE MB417B/A iMac 20" MB417B/A*
*what ram do i need? how much ram can i get? 4g? or 8g?*
specs are as follows:
With a 2.66GHz Intel Core 2 Duo processor, 2GB DDR3 RAM & NVIDIA graphics, iMac brings you more performance than ever. iMac packs performance inside a stunning all-in-one design. Includes Mac OS X.
* 2.66GHz Intel Core 2 Duo Processor
* Mac OS X v10.5 Leopard - Operating system
* 2GB Memory - Run more applications
* 320GB Hard Drive - Load up on photos,videos
* 20'' Widescreen display - Vivid colours
i'd be greatful for any help...

Hello miss_papaya
That model supports 2 4GB modules for a total of 8GB, only problem is that 4GB modules are currently at a premium price. Have a look at the spec's in the following article or in the User's Guide that came with your iMac.
http://www.apple.com/imac/specs.html
Also have a look at Crucial and OWC memory below:
4GB kit > http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=60D83BBCA5CA7304
8GB kit > http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=1D7DBABCA5CA7304
OWC > http://eshop.macsales.com/shop/memory/iMac/DDR3_2009
Dennis

How much RAM should I install for new iMAC ?

Hi,
How much RAM should I install for new iMAC* running Logic Studio? It comes with 4 GB - is that enough? (can you run in 64 bit mode..)
*(The 21.5" 3.06GHz Intel Core 2 Duo)
Also, I was planning to get the stock 1 TB Hard Drive & save projects to an external drive.
Does that sound reasonable?
Any other recommendations?
Thanks,
Wm Heart

Unless you plan on running huge projects with enormous sampled instruments, 4 GB will do (very) fine. And your disk plan is sound. Choose an external Firewire drive, rather than USB. FW is easier on the CPU and can handle more tracks than USB.
What you should get, instead of more memory, is a (24 bit) external audio interface, if you want to do serious recording and playback.
What type of audio interface you'ld need, depends on what you want to do with it and of course your budget. From decent to brilliant costs from roughly 100 to several 1,000's of europounddollars. Avoid the 16 bit ones, they're worse than the inbuilt audio chip of your iMac. You can recognize 16 bit Audio Interfaces (in webshops) by their prize (often under 100€£$) and the lack of mention of their bitrate.
HTH
Regards, Erik.

How much ram can be added to a 2007 SL Imac? has 1 gb now and I want to upgrade it; any suggestions?

How much ram can be added to an 2007 Imac (SL, 10.6.8)? I'd like to upgrade it; any suggestions?

Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

Apple iMac 2.33GHz Intel Core 2 Duo (24-inch), how much ram?

How much RAm can i add into a Apple iMac 2.33GHz Intel Core 2 Duo (24-inch), anyone know?

And I do not see any specifications for a White iMac with a 24" screen that is 2.33GHz.
But now I found it...
http://support.apple.com/kb/SP28
You have what normally would have been a 2.16GHz model but with the made to order 2.33GHz upgrade. Memory is...
1GB (2x512MB) 667MHz DDR2 SDRAM (PC2-5300), supports up to 3GB
officially. You have two slots, each supporting up to a 2GB RAM but officially Apple says 3Gigs is the max. Which is an odd number because normally I would expect to see something like 2Gig based on having 1G rams available at the time. However, since they spec 3GB that would imply that 2GB RAMs were around at the time, but they still specifically say the machine can only have 3GB (2GB + 1GB).
Many older systems can support more ram than their official specs due to larger RAMs being released after the support for testing new RAM was done. Apple specifically limiting you to a single 2GB RAM with the other having to be 1GB would seem to indicate there IS an issue with supporting a pair of 2GB rams.
So you can very safely go from 2GB to 3GB by replacing one of the 1Gig modules with a 2GB module. However I can't say for sure if it would work to go to 4GB or not.
Patrick

How much RAM & CPU should I allocate for Windows 7 Ultimate?

I am in the process of setting up my new 27" iMac i7. I'm brand new to Apple computers so this is a learning curve for me! I have installed Parallels Desktop 5 so I can run Windows 7 side by side with Snow Leopard. Now I am trying to install Windows 7 Ultimate but I don't know how much RAM and CPU to allocate to my virtual machine. Has anyone done this and can anyone help? I have 8 gb RAM and 1 tb Hard Drive.
Thank you for your help!

Hello SwissCanuck,
Just FYI, with regard to 32-bit and 64-bit Windows 7:
You will not be able to "upgrade" from a 32-bit version of Windows 7 to 64-bit -- the architecture between the two is too drastically different to allow such a change. To learn more about the differences between a 32-bit operating system and 64-bit please go to the following link: http://windows.microsoft.com/en-US/windows-vista/32-bit-and-64-bit-Windows-frequ ently-asked-questions
Additionally, check out the requirements here for Windows 7:
If you want to run Windows 7 on your PC, here's what it requires:
•1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
•1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
•16 GB available hard disk space (32-bit) or 20 GB (64-bit)
•DirectX 9 graphics device with WDDM 1.0 or higher driver
Obviously covered as per your hardware. Essentially, it is always better if you run Windows 7 as a "Native OS" you can do this with boot camp from Apple. Typically, the performance is not as fast in virtual environments
John M
Microsoft Windows Client Team

How much RAM do I need to run FCP effectively?

As you can see below, I have an iMac 2.1 Ghz 20 in. (isight) w/ 512 MB of RAM, and I also have FCP, but have been experiencing some playaback framerate issues. So I have decided to upgrade my RAM to either 1 GB, 1.5 GB, or 2.5 GB... My question is how much RAM do you have and how well does it run. I know 2.5 GB's would be the ideal amount, but if I only need 1.5 GB then I would prefer to go with that and use the extra cash for new speakers.
Thanks, and I posted this over at the Final Cut Express board on accident so if any of you feel you have read this before... thats why.

Get an external hard drive - Firewire 400 min/ firewire 800 if your machine will support it.
Having media and the os on the same disk is a recipe for disaster.
x
Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
Also, don't forget to mark the thread Answered when you get enough information to close the thread.

How much RAM is possible?

sorry if this has been posted before, but i am not at my house and i don't have much time to search... i was curious how much RAM can go into a 20" intel iMac? my wife says 2GB, but i found a website that sells mac RAM and they say 3GB for the intel iMac... which one is correct... i want to make sure before i drop any money... thanks in advance...

If the 20" Intel iMac is a Core 2 Duo machine, then the max is 3GB. All of the currently shipping iMacs with the exception of the 17" 1.83GHz model with intergrated graphics have a 3GB max.

How Much Ram Do I Need To Run Logic Pro 9

Howdy.
I'm getting ready to do some recording and editing in Logic Pro 9. I'm running a 2011 iMac
2.7 GHz Intel Cor iS
Memory 8 GB 1333 MHz DDR3
I TB HD
OSX 10.6.8
Is 8 GB enough memory for Logic, or should I bump it up to 16 GB?
Thanks!

diaphones wrote:
To answer your question... Much of what I do invoves "raiding" the loop library and piecing things together. As time goes on, I'm getting more & more into original "progressive" type stuff. I'm not in a band nor am I affiliated with any other musicians, so I heavily dependent on loops.
I haven't had any memory issues (yet), but I just read something about freezing tracks taking some of the load off of memory.
If you're using mostly loops you have plenty of RAM.
Also, if you're not laying down a bunch of recorded audio tracks.. (like recording a band) your single TB hard drive should do fine. Freezing comes into play when the CPU is nearing load limit because of heavy use of software instruments and effects that demand a lot of CPU.
I would say for what you're doing at this time, your system is fine as it is.
If it ain't broke don't fix it.. if/when you run into a problem then deal with it, it's not like you're operating a commercial studio.
My suggestion would be to learn how to use Logic's effects correctly.. (Reverbs, Compressors, EQ, Delay...etc)
Use a Reverb or Delay on a bus, then several tracks and use the same effect, if you use all effects as inserts you're wasting CPU.
Learning how to use your system (as is) is FAR more important than how much RAM, what model Mac or how fast your CPU is.
A good engineer can make a world class recording in Garageband. Don't get to caught up in what you have or don't have.. have fun, be creative.

How much sdram can the iMac 2007 20" dual core 2.4gHz take?

How much sdram can the iMac 2007 20" dual core 2.4gHz take?

Not SDRAM but SO-DIMM.
The max RAM is offically, 4 GB (two 2GB PC2-5300 667MHz DDR2 SO-DIMM) module but, with larger modules released after that model's specs were written, you can achieve 6GB with one 2GB plus one 4GB module.
You must get the 4GB from a Mac Savvy vendor or it won't work. OWC has the larger modules that are well-tested in Macs:
http://eshop.macsales.com/shop/apple/memory/iMac/Intel_Core_2_Duo

How much RAM in my iMac?

Similar Messages

Maybe you are looking for