How much time does it usually takes for moderator approval for a post

How much time does it usually takes for moderator approval for a post?
I have a post posted on Mar 9 and it is still pending for moderator approval.

It's impossible for anyone here to say. It could be very quick, or a given book may never appear. As RG said, it's completely up to the publisher in the applicable country.
Regards.

Similar Messages

How much time does ipad 4 take to fully charge???

how much time does ipad 4 take to fully charge???

It will obviously vary depending on how drained the battery is, but figure on 3-4 hours for a full charge.

How much time does an AP take to failover to secondary controller

hi All,
My query is to understand how much time will an AP take to failover to its secondary WLC(Backup) incase primary goes offline.
Whats the heartbeat time for each AP to verify reachability to WLC.
also what is the purpose of AP Fail over priority under each AP. i want to ensure AP's fall back to primary WLC once its back online.(Preemption)

Hi Matehw,
My query is to understand how much time will an AP take to failover to its secondary WLC(Backup) incase primary goes offline.
We can not tell exact time but normally It takes 1-3 minutes.
Whats the heartbeat time for each AP to verify reachability to WLC.
AP Heartbeat Timeout - AP sends heartbeat to WLC (By default its 30s). Once the primary WLC(or where AP is connected to)goes down, With heartbeats, the AP realizes sooner that the controller has become unreachable.
also what is the purpose of AP Fail over priority under each AP.
First of all there are three types: it goes like this Cirtical...high...medium..low.
***To configure AP failover priority, we must enable AP Fallback feature globally and then individual APs with a suitable priority level.
*** When using both the local and global backup configurations, the locally configured settings take precedence in the event of a controller failure. If an AP is not able to join any of the locally configured controllers, it then tries to join the global backup controllers.
More info:
http://rscciew.wordpress.com/2014/01/22/ap-failover/
Regards
Dont forget to rate helpful posts

How much time does CATPATCH.sql take

Hi,
Iam upgrading my db from 9.2.0.1 to 9.2.0.4 . Its been 2 hrs since the catpatch.sql script is runnig. When i queried dba_registry it is showing status as loading for packege & body.
Can any tell me how much does this script takes.
Thanks in advance.
Bhavesh

The speed of execution is very dependent on the memory and CPU of the machine in which the patch is being applied. I have seen times ranging from 30 minutes to 4 hours. The four hours was experienced with a database in a virtual machine with 512MB of RAM.

How much time does a query take from start to end?

How can i query the time a SQL command takes from start to end (it was a big query and started yesterday evening when we started work today it was ended)?
i selected some values of v$sqlarea but i could not understand the result absolutely. is there a more practical way of getting this information?

select sql_text, cpu_time/100000, elapsed_time/100000 from v$sql where sql_text like '
If the SQL is still in memory, not 100% reliable and there is a Bug 2101311 V$SQL.CPU_TIME / ELAPSED_TIME wrong for DML statements

How much time does the dowload of photoshop CC take ?

How much time does the dowload of photoshop CC take ?

Hi Saurabh,
I am facing the same problem. It is taking very long time in "Create Database Schema".
How the problem got resolved for u?
My Laptop capacity is 500 GB (USB), 2 GB Ram, Dual Core Processor.
Any idea how long it will take in this configuration?
Thanks in advance.
Vijay G

How much time does the ESS import take?

Hi,
How much time does import of ESS into NWDI take?
I have selected following files for import yesterday:
SAP-JEE
SAP-BUILDT
SAP-ESS
SAP-JTECHS
SAPPCUI_GP
and looked at it today and it is still importing.
In CMS Transport Studio State column displays message: Import running.
Any ideas why it takes so long?
Regards,
Ladislav

Hi,
I have imported files one by one in this order:
SAP-JEE
SAP_BUILDT
SAP_JTECHS
SAPPCUI_GP
SAP_ESS
Is this order correct?
I didn't import EP_BUILDT - is it required?
I have checked the CBS logs and there is one broken DC in SAPPCUI_GP compartment
in the pcui_gp/isr development component.
The build log contains this error:
    [javac] Compiling 316 source files to /usr/sap/PDI/JC26/j2ee/cluster/server0/temp/CBS/3/.B/22/t/0C0A08ED5B9ACC3F0164FD6D8A0DB879/classes
     [javac] ERROR: /usr/sap/PDI/JC26/j2ee/cluster/server0/temp/CBS/3/.B/22/t/0C0A08ED5B9ACC3F0164FD6D8A0DB879/gen_wdp/packages/com/sap/pcui_gp/isr/isrprocessevent/FcISRProcessEvent.java:470: cannot resolve symbol
     [javac] ERROR: symbol : method getWebContextAdapter ()
     [javac] ERROR: location: interface com.sap.tc.webdynpro.services.task.ITask
     [javac] ERROR:                               .getCurrentTask()
     [javac] ERROR:                                                                ^
     [javac] WARNING: Note: Some input files use or override a deprecated API.
     [javac] WARNING: Note: Recompile with -deprecation for details.
     [javac] 1 error
Maybe because of this error the requests are queued?
How to fix this?
Regards,
Ladislav

How much time does adf.waitForpageLoaded() waits ?

If I am using adf.waitForpageLoaded() and suppose the page loading is very slow or the page doesn't load completely . How much time does it wait For before finally throwing exception ?

Default timeout will be 60 secs.

How much time does a single transmission take?

Hello,
I was wondering what is the time taken to transmit one sample takes. For example, if the sample interval is 5 seconds, does the actual transmission take 10ms? What does it do for the rest of the time?
Also, how much energy does a 3202 node take to transmit a single sample?
Thanks,
Sravan

Hey Sravan,
I wanted to provide some additional details to Kyle's post above.
This is on average what we have seen with a 3212 node sampling at a 60 second sample interval:
Sleep Duration: 58.774 seconds
Sleep Power: 7.41 mJ
Acquisition Duration (All 4 channels): 1150 ms
Acquisition Energy: 2.84 mJ
Transmit Duration: 55 ms
Transmit Energy: 9.17 mJ
Receive Duration: 21 ms
Receive Energy: 1.83 mJ
Additionally, if your sample rate is above 61 seconds, then you will run into the Heartbeat Interval which fires after every 61 seconds of inactivity. Below are average power measurements for the heartbeat interval:
Transmit Heartbeat Duration: 55ms
Transmit Heartbeat Energy: 7.79 mJ
Note: Each heartbeat will then also need to account for receiving that a response from the gateway (Receive information from above).
Taking all that into account, the graph below shows estimated battery life for sample intervals up to 300 seconds. The dips in the graph represent a sample interval that is just larger than the heartbeat interval, which essentially means you are transmitting twice in a very short period.
Hopefully you find this information helpful. Please let me know if I can clarify anything for you.
National Instruments
WSN/Wireless DAQ Product Support Engineer

How much time does it take to build a website in muse?

I would like to know how much time I will have to use in order to make my website from scratch.
I already have the content (Images, Text, Organization)
I would like it to be 10 pages.
I have watched a lot of tutorials and have played with muse for a while.

Hi
This would entirely depend on the site and the design you are creating.
There is no exact time defined as such , as you have already gone through tutorials and worked with Muse , I would suggest you to use the features and try.
Thanks,
Sanjit

How much time does 8.2 software have?

I've been reviewing software revisions for the Cisco ASA 5500 family. We have a few clients running 8.2 and the jump to 8.3 will require significant effort to make sure everything translates properly. There are no features in 8.3 that these clients require so it seems in their, and our, best interest to let them ride the 8.2 software until an upgrade is necessary to continue receiving security patches. I have looked for EOL notifications but have not found anything for 8.2. I have also placed an inquiry with our SE at Cisco, but I thought I would ask if anyone knows anything about how much time 8.2 has before we could expect to see an EOL notification.

Hi,
Here is some information related to 8.1 Software.
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/end_of_life_c51_640618.html
Table 1. End-of-Life Milestones and Dates for the Cisco ASA 5500 Series Adaptive Security Appliance Software Release 8.1
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
January 15, 2011
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
July 16, 2011
Last Ship Date:
OS SW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
October 14, 2011
End of SW Maintenance Releases Date:
OS SW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
July 15, 2012
End of New Service Attachment Date:
OS SW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
July 15, 2012
End of Service Contract Renewal Date:
OS SW
The last date to extend or renew a service contract for the product.
October 11, 2015
Last Date of Support:
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
July 31, 2016
HW = Hardware OS SW = Operating System Software App. SW = Application Software
I can't seem to find the same for the 8.2.
Though I would consider that there are still alot of users happily going about with the very old PIX firewalls running software 6.x or even older. Not saying its a good thing but it work.
And considering 8.2 is the latest software before the BIG NAT change I would imagine it will stay in use for a long time for those that dont want to learn/adopt the new NAT format.
- Jouni

How much space does a boolean takes up

Hi.
I know an integer primitives takes 32 bits
how many bits does the java boolean takes up. 2 bits ?
also, would it be the same as the Boolean object ?
Anyone can help answer this question ? thank you :)

Hi.
I know an integer primitives takes 32 bits
how many bits does the java boolean takes up. 2 bits
also, would it be the same as the Boolean object ?
Anyone can help answer this question ? thank you :)Why 2 bits? One bit is enough, but I doubt this would be an
efficient way to store it from an access time point of view.
I think it should take some minimum number of full bytes that
are eficiently accessible on a given architecture(4 or perhaps 2 or 1). The language specification does not prescribe any particular size.
Allocate yourself a huge boolean[] and check the increase of size of the
VM, this should give you an idea. Boolean, on the other hand, is an object, pretty sure it's a small one (as small as a boolean), but the overhead of a Boolean[] should be bigger (the objects and the references to them).

How much space does a DVD take up?

how much space on an iPod does the average, say about 2 hours long, DVD take up?

yeah, i agree with tvp. With the standard setting, I get around .76 to 1 GB a piece

Estimating how much time a sql will take

Is there a way to estimate how long a sql will take. Is there a command in sql to estimate the time?
Is there a direct correction when looking at the COST in the explain plan to the amount of time a sql will take? Thank you in advance.

No. You might as well ignore the cost number. Anything to do with the cost-based optimizer, Jonathan Lewis is your man. His interpretation of cost is "the time to completion of a query, but expressed in units of single block reads rather than in proper time units".
Of course, as Tom Kyte points out, the Explain Plan is only a mathematical model predicting the query's performance. Cost is an estimate not a guarantee.
Cheers, APC

How much space does ios 8 take up?

Thinking about trying an Ipad mini 2, can anyone tell me how much space the OS on these devices uses? Thanks

yeah, i agree with tvp. With the standard setting, I get around .76 to 1 GB a piece

How much time does it usually takes for moderator approval for a post

Similar Messages

Maybe you are looking for