How multiple inputs monitors are managed by OSX ?

Hi.
I have a 2013 Mac Pro (D300) and a 6MP Eizo RX650 monitor. The monitor has to be connected with 2 DP inputs in order to address its native resolution.
With this setup, I am not able to display a full extended desktop. What I have is two desktops side-by-side, with two menu bars and one Dock on the main desktop. Like when two separated monitors are connected to the computer, but here on the same only screen.
This creates a very confusing and unsatisfying user experience, especially in the field this monitor is dedicated to. I was wondering if there is a way (system or third-party) to extend the desktop on the whole surface of the screen ?
Best regards,
RW

Try unchecking "Displays have separate Spaces" in "Mission Control" system preference, then logout and login.

Similar Messages

Qosmio G40 - How do I monitor sound input?

I have installed Adobe Audition on my Qosmio G40 but have been unable to monitor sound input or get Auditon to record. (It used to work fine on my xp pc) I have been able to record sound but cannot listen to it as its 'going in'. I also tried to install an external sound card: CREATIVE EXTIGY but cannot get the laptop to recognise that it is installed.
Can EXTIGY work with my laptop?
How do I monitor sound input?
The installed sound card is Realtek
Advice welcome.
Sean.

I presume you mean the menu when you right-click the volume control icon on the desktop toolbar. It does list the input devices and when a mini jack input is connected the simulated led lights respond to the volume of the input. I can record from the line input but I cannot hear it as it is going in. In other words it records it silently but plays it back okay.
The device manager declares that the sound card is working without problems,
Somehow I want to be able to hear the input as it is being recorded and I have not been able to find out how yet. Some people have been telling me that it is a vista problem. Others say that its the laptop manufacturers who set up the laptop so that when recording line input the sound is disabled to prevent feedback from the external mic on the laptop.
Either way I am a bit astonished that I cannot resolve this problem and it is not a problem that has been mentioned before when you consider how many thousands of people are buying Toshiba laptops !!
A few days ago I emailed Realtek but have not held my breathe for a reply.
Its looking like I might have to uninstall vista and reinstall xp to solve this problem.

How can I have multiple inputs into the selector terminal of a case structure

Hi everyone
I have a question on how to wire multiple inputs in to the selector terminal of a case structure.
Currently, I have three switches, each switch determines different case. So if I switch the switch 1 is on, the numeric indicator will show 1. If the switch 2 is on, the numeric indicator will show 2, so on and so forth. However, the selector terminal will not allow me to wire multiply inputs into the case structure, I tried Bundle by Name, Bundle and Array to Cluster, but they did not work. I set the case structure with 3 cases, they are 1, 2 and 3.
Could someone help me please. I have attach an image and the VI of the work I did so far.
I have another question, is there a function which can toggle other switches to off when there is a switch has been toggled on.
Thank you very much
Tommy
Attachments:
Trial - Case Structure.vi ‏7 KB

Tommy, attached find a cheeseball way of doing this that has given me a LOT of mileage over the years. IT lends itself nicely to a couple of really good practices that NI recommend, but I have given you the bare-bones to "see under the hood".
The recommended practices:
1. You can make this a nice tight sub-vi where you can put it into a core library of routines that you'll use over the years, even extending the logic to look only for changes, etc.
2. If you are thinking about Front Panel design considerations, you'll want to use arrays of controls where possible, as that's a nice neat way of containerizing your switch for both the FP and Block Diagram.
Have fun. I have TONS of these types of things, so feel free to PM me if you have any other needs.
Wes
Wes Ramm, Cyth UK
CLD, CPLI
Attachments:
Boolean Switch Logic.vi ‏11 KB

How do I create an xControl with multiple inputs and outputs?

Hello,
i am trying to write a new Xcontrol Element. In the data model I can create data types using the cluster to create compound types, eg an int and an int array. But how do I create an xcontrol which has multiple data inputs and outputs?
Kind Regards

Limping_Twerp wrote:
Alright: I see: An xcontrol is either an input OR an output. How do I achieve an output? Secondly: So you are saying the only Elements that can have multiple inputs and outputs are VIs?
Can you take a few steps back and explain what you are actually trying to do. SubVIs and Xcontrols have nothing in common and it is not clear why you even try to compare them side by side (e.g. in terms of the number of connectors).
Your questions about input or output tell us that you seems to have some misconceptions about xcontrols. Xcontrols are like regular controls, except they have some built-in intelligence that you can program. Most front panel object can be either controls or indicators and the same is true for Xcontrol. You create an Xcontrol, and after placing it on the front panel you can decide if it should be a control (where the code reads the value) or an indicator (were the code writes values to it). When you define the xcontrol facade, you also need to program how the visuals change if it is changed from control to indicator or vice versa.
As a first step, you should opend the example finder and look at some xcontrol examples.
Again, what are you actually trying to do?
LabVIEW Champion . Do more with less code and in less time .

How to have multiple inputs for a Pic Ring?

Alright, I've got this program in which there is a pic ring with multiple pictures on a tab page on the Front Panel. And on the Block Diagram the Pic Ring receives a number through a numeric indicator. There are multiple boolean variables set up and depending on which one is true that dictates which number the indicator pushes on to the Pic Ring. However, I can only connect one boolean up to the indicator at a time. If I connect mutliple wires to the indicator the wires become broken immediately. I have a screen shot depicting the setup in the Block Diagram.
Anyway, my question is basically how to setup a numeric indicator for a Pic Ring to have multiple inputs?
Attachments:
PicRing Multiple Inputs.jpg ‏319 KB

Shogun,
You will probably need some sort of case structure to determine your input.
It looks to me like you are searching a common string for whether it contains Valve1, Valve2, Valve3 and so on. Depending on which one it finds you are outputting that picture. I would need more information as to what exactly you were doing, but I might look in the string for "Valve" then a number and feed that output into a case structure. For instance if you find Valve3 in the string you send the input corresponding to Valve3 into the picture ring
Matt J
Professional Googler and Kudo Addict
National Instruments

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

How to input Credit Control Area in T.Code F-28

Hi,
   Can any one tell me how to input the credit control area at the time of incoming payment (T.Code: F-28)
   The scenario is we have multiple credit control areas and we want to select credit control area at the time of receving payment. In my case , the field is display only.
   Thanks
   Sarma

have a look here
http://help.sap.com/saphelp_47x200/helpdata/en/4d/0a4aa6b26811d194f400a0c9306794/frameset.htm
A.

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard, and now the two monitors are showing the same thing. How do I undo what the cat did?

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing. How do I undo what the cat did?

Have you tried HELP in FINDER? If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors. Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
Ciao.

I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
Bill

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

How to avoid purchasing multiple things that are the same but different titles

How can I avoid purchasing multiple things that are the same but have multiple names but is the same purchase for the same use?

"Things"? What things? Apps for keeping track of when to change cat litter? 30 different versions of "twinkle, twinkle little star" played by everything from punk rockers to Gregorian chant? Videos on the best way to make Christmas cake?

How do I get multiple inputs?

Hi. I have Logic Pro 9 installed on my Macbook and on my iMac. I have tried to use a 12 channel mixing desk as the inputs for recording, but it will only ever allow me to select 2 inputs. This is on my Macbook only, I don't have the same problem on my iMac. Previously I have a 2 input device (an Apogee Duet) and used this on both computers. When I connect the mixing desk (Yamaha MG166cx-usb via the firewire to USB connector, it shows up in the preferences and allows me to select it as the input and output device under preferences, audio, devices, core audio option. If I add a new audio track, it will only still show me the option of selecting input 1 or input 2. If I do the same on my iMac, it will show multiple inputs. I have uninstalled my previous audio device, and also uninstalled Logic, moved to trash, downloaded again, but the same symptoms are there.

Yes. Of course I read the manual. It quite clearly shows in Cubase, which I haven't installed and don't use 4 stereo and 8 monoaural tracks. It's on page 11 of the hard copy manual. I have however just set up a blank project and tried recording from different channels on the mixer. (1 and 5). I can record either one individually, but only two channels simulaneously, but no more than two channels it seems. Are you saying this is all I ever will achieve with this desk? Seems a bit pointless almost to sell a desk with multiple channels yet only lets you record two of them with one of it's selling points - a USB connection facility. It's not the reason I bought the desk by the way, I use an Apogee Duet to record at home, I just wanted to be able to set up and record each individual channel during a live performance via the PA and then clean up and mix properly at home. Guess I'm not going to get far on that front

How to Enter multiple inputs at a time in Form or Table

Hi,
I have one doubt in Webdynpro with java. How to enter multiple inputs at a time?
For Exam My requirement is we will take employee details node under node empid, name, sal etc some attributes is here
Client asking like this enter multiple inputs at a time that data will saved in ECC System.
1.     By using form how can enter enter multiple inputs at a time I donu2019t this so I will take table(here I will select input fileds). If any possible in form also tell me how I can enter multiple inputs at a time.
In table suppose 6 rows available So He will enter
                         empid, name, sal ,firstname, last Name
                         empid, name, sal ,firstname, last Name
                         empid, name, sal ,firstname, last Name
Like 6 time Click Submit. That data will save in ECC.
So I was taken table. But in that Table only first row will be editable. I want all 6 will editable that time he will put data in rows then click on submit.
How to editable these remaining rows? if u have any documents pls send me.
Regards
Vijay Kalluri

Dear Vijay,
To enter multiple inputs in a table and to make the other rows editable you have to provide that node with initial values.
by initial values I mean you have to make that much space in your table node.
For example the name of Node is yourNode & you have empid, name, sal ,firstname, last Name
attributes in that node, and you have to make 6 rows editable.
Then, simply write this code in you wdDoinit() method of your view controller.
IPrivateYourView.IYourNodeElement e ;
for(int i = 0 ; i < 6 ; i++ )
e = wdContext.nodeYourNode().createYourNodeElement();
e.setAttributeValue("empid" , "") ;
e.setAttributeValue("name" , "") ;
e.setAttributeValue("sal" , "") ;
e.setAttributeValue("firstname" , "") ;
e.setAttributeValue("lastname" , "") ;
wdContext.nodeOverTimeEnty().addElement(e) ;
Change YourView with your view name & YourNode with your node name.
If you have any problem in doing this you can revert back.
Hope it helps!!
Warm Regards
Upendra Agrawal

Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

You can output audio thru HDMI, with appropriate adapter.
You can use additional cheap external usb audio for monitoring.

How to edit the properties for existing variables in BEX query, so that I can get multiple input selections

Dear fellow developers,
I'm trying to edit an existing variable using BEX query, so that it can allow multiple input selections.
As you can see in the screenshot attached, the option is selectable during creation.
However, during editing of an existing field, this field (Details -> Basic Settings -> Variable Represents) is not selectable.
Does anyone knows why, and how to remedy this?

Yes you can do it at the table level.
Go to SE11 enter table name as RSZGLOBV.
Enter the technical name of variable in VNAM field..You need to change the value in VPARSEL column.
Please make sure to get the where used list of this variable so that you can know the impact,if something goes wrong.
Also change it in DEV and then transport across the landscape.
PS:Same thing has been described in this blog as well
Changing BI variable parameters
Regards,
AL
Message was edited by: Anshu Lilhori

How multiple inputs monitors are managed by OSX ?

Similar Messages

Maybe you are looking for