How NOT to report scores

Project: Must get over 80% of quiz questions right to pass (and be marked as complete).
I'd like to NOT pass along the actual score to my LMS (I just want complete/incomplete).
Is there a fairly simple way to do this (without writing scripts etc)? Or is this a small developer project?

Hello...I'm using INquisiq and they said their fields are fixed but I could possibly get my project to just not send the scores (so it would appear as a dash).
In this project, once a user gets 80% of the quiz slides correct, they have passed (and completed...they land on a slide with no chance to go back and redo it). A surprising number get hung up on the score since its on their permanenet transcript (i.e. they pass/complete but still want to try it again for a higher score...but cant).
Additionally (a side issue), the words PASS and FAIL can get people going (esp when they bookmark during the project and they show as failed). If given the option, I'd pick complete, incomplete, not attempted as my only feedback to the user. I've set Report Status to complete/incomplete but still get pass/fail. Its SCORM 2004.

Similar Messages

How do you draw a tie of two notes in the score editor window

How do you draw a simple tie in the score editor window of Logic Pro 10 ; two quarter notes together, an eighth up-beat accross a bar line into the next measure etc? I can't find the answer in videos, help manual. Please give a step by step how to do it.
It's hard to believe that a program like Logic, that has more information than the New York Public Library, does not have a simple solution for tieing notes. Maybe Logic XI will have one, or "Logicians" can speak to Sibelius for a more "note-worthy" way to solving the problem so that the score editor can be more accessible for editing purposes for those that read and write manuscript. Lew Traver

Hi
Ties are generally automatically created as necessary. Simply adjust the length of the note in the Score (using DurationBars or the Inspector), or in the Piano Roll or Event list.
CCT

How do I report a fault if my phone is not working...

How do I report a fault if my land line phone is not working? The BT website seems to assume that at the very least the broadband line is working but this is often not the case. Please could you make it crystal clear what phone number to call to report a fault? (e.g. if calling from a friend's phone or a mobile).

Cal 0800 800 151 from another phone, or From a mobile: 0330 123 4151
But first do these tests here http://bt.custhelp.com/app/answers/detail/a_id/9812/c/345,353
You can report the fault online at https://www.bt.com/consumerFaultTracking/public/faults/tracking.do?pageId=2&s_cid=con_FURL_faults
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How do you get firefox not to report personal information

A federal Goverment Agency posted some of my personal information on the web and is doing so illigally in violation of the privacy act, and other reporting laws, can some one tell me how to get Fire Fox not to report this illegal information ?

Hi andy82997gmail.com, what kind of information are you talking about?
I noticed you included a link to a Department of Housing and Urban Development PDF. What was that for?
There are a number of aspects to being safe and protecting your privacy on the web.
When you visit a website using Firefox, the browser usually will allow the site to set and retrieve cookies. This allows the site to know your browser from all the other browsers visiting the site. Most cookies do not contain personal or confidential information, but depending on the site you visit, it's possible. Many (most?) sites also include content from other servers, and these servers can set and retrieve their own cookies, often called "third party" cookies. These tend to be for tracking your online activity to show you more persuasive advertising. Firefox lets you manage all kinds of cookies. For more information, see this article: [[Cookies - Information that websites store on your computer]].
Using Firefox, you also can store information about your browsing: bookmarks, history, information entered on forms, logins, and so on. Are you concerned about any of that information? You could try this feature: [[Private Browsing - Browse the web without saving information about the sites you visit]].
When you browse the web (in regular mode or private browsing mode), intermediate service providers generally capture information about the sites you visit in their web logs (e.g., date, time, URL). Some people who do not want their ISP to track their browsing will sign up with a VPN service. Of course, you need to trust the service: there is no way to request a URL and not have anyone see it at all.
Finally, Firefox allows you to install add-ons, either from the Firefox add-ons site or bundled with other software you install. You should keep an eye on add-ons and all other software you install to avoid spyware or malicious programs.

TS1702 How do I report a "bad" app product to Apple? The App developer has failed to address the problem and keeps on selling a product which does not work. Surely Apple has some liability in this case or at the very least some responsibility.

How do I report an App that is not working and the seller has not fixed the problem yet is continuing to sell it? People are being ripped off and Apple does not seem to care.

sophiesheu wrote:
I recently purchased a scam app (GPS map Virgin Islands) by the Kaart Data LLC. I first emailed the developers and got a quick response: "we are sorry that you don't like the app, but we don't do refund". I went to the "Report a Problem" link from Apple like King_Penguinsuggested, and got a response from Apple saying they will refund the whole amount and start an investigation on that app. So it definitely worthes a try.
Glad you got some resolution on that. I'm not familier with the app you had issues with, but the one the OP was questioning is very highly regarded and widely sold. Odds are the issue was with his iPad and he never responed to inquiries about troubleshooting (I suspect he had not tried much of anything).

Captivate 3 Not Reporting Scores to TEDS LMS

Hello Everyone,
Thanks for taking a moment to read through this.
I'm trying to build a course in Cap-3, using the TEDS LMS (SCORM 1.2).
The course runs fine, but is not sending the scores to our LMS. I'm not the *most* techincal of folks, but I want to exhaust my troubleshooting first.
Here's what I've tried.
First:
Screen shot of the repeated failures (quiz is a generic 2 question quiz):
It's a little hard to see, basically it shows my three quiz results with "Failed" after each.
Each time I took the quiz, I passed with 100%. I set the pass threshold to 80.
Here are the steps I've taken so far:
http://forums.adobe.com/message/122880#122880
Attempted steps in PDF, adjusting HTML to increase SCORM API load time
Adjusted HTML to comment out one line
Added a blank button slide
http://forums.adobe.com/message/751946#751946
Attempted to change quiz information to the following:
-Complete/Incomplete
-Quiz Results Only
-Score
-Report Score (And Report Score and Interactions)
Same Forum:
Added a button on a new slide that executed LMSFinish() javascript.
All tests result in a failed result.
I know there's a lot of other technical tests I can run, but basically my only options right now are to modify things in Captivate and upload new tests to TEDS FTP.
If you feel I've exhausted all my options, I understand!
Thanks for your assistance.
Paul Trively

I've not lookede through the previous thread, but you've done variations on the settings?
You have tried Pass/Fail instead of Complete/Incomplete? Generally, if you want a score to show, you need to use Pass/Fail. That's not always true, but a score is generally not associated with Complete/Incomplete in SCORM 1.2 (in my understanding).
Have you tried the lesson through any test suite outside the LMS itself? That'd be my next step. The ADL Test Suite is the 'offical' tool for such testing but isn't very user friendly. Otherwise I'd suggest Rustici's Test Track
http://www.scorm.com/scorm-solved/test-track/
or the Reload Editor (which I've not used and am not 100% sure is for SCORM validation)
http://www.reload.ac.uk
Run the lesson through some SCORM tester and see if the values passed are what you expect. If not, change the settings, publish, and test again. A lot more efficient, hopefully, than going through the LMS itself and allows you to possibly determine an LMS issue over a lesson issue.
HTH
Erik

CP8 reports score not percentage to LMS using SCORM 2004 3rd edition

Hi,
I have 24 questions and when I answer 2 questions correctly I get a score of 20, (each question being worth 10 points), but it is possible to send to the LMS a percentage and not a total score? This LMS does not calculate but just shows what is sent which is confusing to the learner. I'm using SCORM 2004 3rd edition.

Hi Rod,
Thanks for that tip, I've double checked that and it appears to be correct. I was under the impression that the reporting section would just be used for the criteria for completion and would still report the score/percentage.
This is what my screen looks like, pretty standard I think.
Any other areas that I should doublecheck? I was thinking of making each question worth 5 points but that would require manually adjusting each course, less preferred way to fix it.
I started thinking that under Quiz Result Message I only have Correct Question and Total Questions checked off, but don't know if that would cause the percentage to not output. Unlikely I think.

HT4009 How can i report my bought chips but not credited in my account?

How can i report my bought chips but not credited to my account.

You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How do I report use of my email address by someone else (not my apple ID)

Hi there,
Someone has registered on apple, using my gmail address. This isn't my apple ID, but I don't want someone else using my email address for their account. Likewise, I don't want to end up receiving personal info or anything from this person as they use their account. How do I report this and get it stopped?
Thank you
Richard

Thank you anyway. I did try finding an appropriate discussion group to place this question but nothing came close! Thanks again for your help. I'll try and see if Apple Chat for purchase options can put me through to support tomorrow. They're closed for now.

Re : How to configure report painter

hii kings
could u tell me how to create report . what are the steps require to report painter. In that what is the purpose of Library , how is create the same. We can report Create report Under the library sothat which purpose.

Hi,
now i will send it steps
Report Painter
Key Features of Report Painter
Prepare Plan/Actual/Variance Expense Report
Cost Elements Actual            Plan           Variance
Salaries Xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Office         Xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Travel         Xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Supplies Xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Total         Xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Use the following account numbers and descriptions in your report:
Account number Description
430000         Salaries
470000         Office
474100         Travel
476000         Supplies
Create a new report.
Menu Path: Information Systems > Ad hoc reports > Report Painter > Report > Create
On the Report Painter: Create Report screen, enter:
Library 1VK
Report RSS-A
Report Description Report w/Total Row
Hit <Create> button to move to the next screen.
Create the Rows of the Report The first four rows are cost element characteristics
Screen: Report Painter: Create Report
Type Cost Elements in the lead column cell
Double click on Row 1
In the Pop-up window 'Element definition: Row1", enter:
Note: If Pop-up window (select element type) appears, choose 'characteristics' and hit <Enter>.
Select 'Cost Element' as the characteristic in the 'Available characteristics' section
Hit <Move selected to left> button to move the characteristic 'Cost element' to the 'Selected characteristics' section
From 430000
Hit <Change short, middle and long texts> icon (at the bottom of the window)
In the Pop-up for Enter Texts, Enter:
Short Description from Table above for this Account
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close the Pop-up
Hit <Confirm/Enter> to check consistency and close.
Repeat the above steps for the other 3 accounts
Create a formula row to calculate the total of the Cost Element rows
Screen: Report Painter: Create Report
Double click on Row 5 or the next empty row.
In the Pop-up for Select Element Type select 'Formula'
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Formula'
Use the calculator buttons to create the formula Y001 + Y002 + Y003 + Y004
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Texts'
Short Total
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Enter> to close the Pop-up
Make sure your cursor is in the cell containing the word Total
Follow the Menu Path: Formatting > Row
In the Pop-up 'Row Formatting'
Over score checked
Underscore checked
Hit <Enter> to close the Pop-up
Create the first column for actual costs
Screen: Report Painter: Create Report
Double click on the Column 1 cell.
In the Pop-up 'Select element type'
Select Predefined Key Figure radio button, and press <Enter>.
In Pop-up 'Choose predefined column'
Select Actual Costs as the predefined column, and press <Enter>.
In the Pop-up 'Element definition: Actual costs'
Press <Confirm> to check consistency and close.
Define the second column for plan costs
Screen: Report Painter: Create Report
Double click on the Column 2 cell.
In the Pop-up 'Select element type'
Select Key Figure with Characteristics as the element type, and press <Enter>.
In the Pop-up 'Element definition: Column 2'
Value Type 01   (Plan)
Version 0   (Actuals)
Valuation 0   (Legal valuation)
Hit <Change short, middle and long texts> icon
In the Pop-up for Enter Texts, Enter:
Short Plan
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close Pop-up.
Hit <Confirm> to check consistency and close.
Create a formula column to calculate the variance between actual and plan costs
Screen: Report Painter: Create Report
Double click on the Column 3 cell
In the Pop-up 'Select element type'
Select Formula as the element type, and press <Enter>.
In the Pop-up 'Enter Formula'
Use the calculator functions to create the formula X001 X002.
Hit <Confirm> to close the Pop-up
Enter Variance as the text for all three fields.
Hit <Enter> to close.
Define the parameters for general data selection
Screen: Report Painter: Create Report
Follow the Menu Path: Edit > Gen. data selection
In the Pop-up 'Element definition: General data selection'
Select Controlling Area, Cost Center, Fiscal Year, and Period as the selection characteristics
Hit <move selected to left> icon to move the selected characteristics to the selected characteristics section of the window
Enter the following values for your characteristics:
Controlling area RSS   ('from' field)
Cost center - 1000 to 2000
Fiscal year - Current year
Period - 1 to 12
Hit <Confirm> to check consistency and close.
Check the report for any errors and save it
Screen: Report Painter: Create Report
Follow the Menu Path: Report > Check or press < Shift + F6>.
When the system comes back with a message of No errors were found, click <Save> to end.
Assign the report to a report group using the function in Report Painter
Screen: Report Painter: Create Report
After the system has come back with Report RSS-A was saved
Follow Menu Path: Environment > Assign report group
On the Insert Report in Report Group Screen:
Enter Z0#A as the group
Hit <Enter>
In the 'Create report group' pop-up window
Click <Yes> to create the group
Make sure the system has come back with Report RSS-A was saved in Report Group Z0#A.
Execute the report
Screen: Report Painter: Create Report
Follow the Menu Path: Report > Execute
Notice that there are no selection criteria to enter. These were hard coded in the general selection characteristics.
Click the <Execute> icon.
It is a very basic report of plan, actual, and variance costs for a group of predefined cost centers.
it's useful assigne points as a way to say Thanks
Regards
gvr

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

How to get report in excel format instead of pdf from oracle forms.

Hi,
How to get report in excel format instead of pdf from oracle forms.
Form & Report developer 10g
report format .rdf

create a report using report builder.
call the report from form using the following procedure
DECLARE
     RO_Report_ID REPORT_OBJECT;
     Str_Report_Server_Job VARCHAR2(100);
     Str_Job_ID VARCHAR2(100);
     Str_URL VARCHAR2(100);
     PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
     IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
     END IF;
     PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
     RO_Report_ID := FIND_REPORT_OBJECT('RP2RRO');
     Add_Parameter(pl_id,'P_SUPCODE',TEXT_PARAMETER,:CONTROL.S_CODE);
Add_Parameter(pl_id,'P_INVOICE_NO',TEXT_PARAMETER,:CONTROL.IN_NO);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'INVOICE_REG_DETAILS.rep');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'SPREADSHEET');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_dbserver_frhome1');
     Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
     Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_dbserver_frhome1') + 2, LENGTH(Str_Report_Server_Job));
     Str_URL      := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_dbserver_frhome1';
     WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
     DESTROY_PARAMETER_LIST(PL_ID);
END;

Can not print report directly to printer.

Hi,
We are using Crystal Report Server for reporting in our project.
The version we are using is Crystal Report Server XI R2 and Crystal Report Server XI R2 SP 2.
Please kindly advice us on the following issues we faced:
- Can not print report directly to printer.
The print button on the Crystal Report Viewer prints the report to pdf and user have to click "Print" again in the pdf file. This is unusual and not convenient. As we have hundreds of reports to print, is there a way we can print the reporrt directly to printer?
- "Set to Null"
In the default interface of the Crystal Report View, there's is this "set to null" check box that we can not remove. Is there a way to do without it?
Thank you,
Kenny Tew

Morning Kenny,
The printer settings are in server management console. Additionally see what settings you have setup for the printer for the report in the server. If it is setup to use End User printer then check your End user machine settings and make sure the printer is setup as a default printer on his/her machine.
Please let us know how you get along with the issue.
As far as "Set to Null" I am not sure where it is set up. A screenshot of it might help understanding it better?
Many thanks
Regards
Jehanzeb
Edited by: Jehanzeb Navid on Oct 6, 2008 11:07 AM
Is this issue on all computers or only one computer?
I have just tested this on my colleague machine and it asks for default printer and not pdf however on mine I setup for pdf.

How can I report people that are harassing me on my question?

I posted a question on how to fix a problem that I had with my iPhone. When a person posted me talked about dealing with an employer to solve the problem. No it don't matter how I read it I asked why did they assume that without asking me if I even had a job that the phone was used for. After that the harassment started as if they were defending their friend and I was cruel to them. I did get an answer to my problem but the harassment keep going on and on and on even one wrote that because of that one question I shouldn't be able to post anymore questions when I would need it.
How can I report this to someone? Who else have these people harassed? Would these people be addressed that they shouldn't be behaving like this?

Sorry, but the poster before Bee, and Bee herself did not write anything that could be construed as harassment. If those posts deeply hurt you (as well as the original post that set you off) then I would strongly suggest that the Internet is NOT a place you should spend any time as your feelings are going to constantly get hurt. In fact, I'd suggest avoiding all contact with other people as much as possible if KiltedTim hurt you with his post.
As has been repeatedly explained, he merely asked because that is another avenue that could cause the Camera app to be removed, and he went on to explain how this happens. There is nothing personal in it, we don't care how you got your phone, where you work, what type of job you have, etc. He did care enough to join in and give another possibility as to why your camera icon was missing. If you do a search of these threads you will find that more than a few people have decided to put their work account on their personal iPhone and the profile installed on their iPhone by personnel at their workplace changes features on the iPhone.
Again, if this, and the answers here, deeply hurt you, pull the cable from the Internet immediately.

Is that possible to report score from a selected set of questions in a quiz?

Hi I am new to Captivate and SCORM. I've been reading the forum discussions and Lilybirl's blog, and learned a lot in the past few days. I wish someone could help me with this too:
We hope to design a course within a single captivate project which allows the following functions:
There are several pre-tests and one post-test. The scores from each pre-tests will be used for branching purpose. See, if one takes pre-test 1 and passes, then she will go to lecture 2; otherwise goes back to lecture 1; if one takes pre-test 2 and then passes, then she will go to lecture 3; otherwise go back to lecture 2; same for pre-test 3, 4, 5, .... Now I know that I can use a customized variable to realize this part. I can create a user varaible as pretest_score, and set it as 0 at the beginning of each pre-test; let it do the math everything the learner answers a question slide. Then at the end of each pre-test, jump based on the value of the pretest_score. Then for the post-test, the pretest_score will be set as 0 again, and the culculation will start from 0. It will also generate a customized report page to report scores on each pre-test and also on the post-test.
However, we wish to be able to pass only the final score on the post-test to the LMS. Since I read that most of quiz variables are read only. Is there any way I can get around this? Is there something in the SCORM package that I can change to the variable that I created so that I can pass this variable's value to the LMS?
Any suggestions would be very helpful.
Thank you very much.

Hi,
I do not describe it in the blog posts, but you could also set the scores of the pretest question slides to 0, and track those scores only with a user variable and advanced actions. That way the total score will have only the scores of the final test, where you attach score to those question slides. Only one annoying thing: the total number of questions will have all the questions included, same with the number used in the progress indicator. You'll have to avoid showing those numbers to the user, but if you can live with that, could be easier than to create custom question slides.
Lilybiri

How NOT to report scores

Similar Messages

Maybe you are looking for