How often Apple take care of user reports on the Maps app?

I report on many problems at Apple new map app. But it seems Apple doen't take that reports sersioly. How long should I wait to see a report taking care and to see the map update according to the report?
How the "Report a problem" system works?

My experience has been they are very slow.
I've tried to report the correct address for the houses in my development for the past year, making multiple reports. Both from my own iPhone, iPod Touch, and from iPhones in Apple Stores. They still think the 11 house housing development has the single address from when just one house was there and before it was subdivided in 2004, even though the satellite image shows 11 houses.
I Reported the error to Google and it was updated in a week or so.
Waze let me make the update myself, as well as layout and name the development roads.
It can get annoying when people cannot find your house because the GPS does not have your house.

Similar Messages

HT3702 I would like to remove the credit card info from my account and only use iTunes prepaid cards. How do I take care of this and make sure that payment will be taken from iTunes cards? Thanks

I would like to remove credit card info from account and only use iTunes prepaid cards. How do I take care of this and make sure payments are takin from the iTunes cards? Also, I need to change my last name and address on account.

Hi Alexis ...
I need to change my last name and address on account.
Help here > How to change the name you use for your Apple ID
I would like to remove credit card info from account and only use iTunes prepaid cards.
Help here > Create an iTunes App Store account without a credit card

I am wondering how often apple updates the App Store which processes new app updates

Does anybody know how often apple updates their stor, I am waiting for an update to my favorite app to be released

New apps are added daily for the most part. When a developer submits an update, the update is reviewed. Depending on the number of apps for review, I have heard it can be a couple of days to a couple of weeks for updates to be made available. Your app's developer should know the approximate release date (or at least when they submitted the update.).
HTH

How to use advanced tab in user reports?

Hi,
How to use "advanced" tab in user reports?
I have two reports. I fill "Report ID" in both and then I can push "Add Report" and fill fields property.
Then I'm can "drill" from one report to another on right click, but how to pass parameters?
Is it even possible?
Regard
Libor

Thank you for reply.
I can't get it working.
I have two reports:
1. report:
Name: test
SQL: select 1 NUM, 'text' TEXT from dual;
On advanced tab:
ReportID: -null-
Name: test2
Report: Test2
2. report
Name: test2
SQL: select :NUM from dual;
Now, when I run the first report and click do right click on a row and select TEST2
from popup menu, it navigates to the second report test2, but WITHOUT actual value
from NUM column from first report.
I'm using latest version of SQL Developer (1.1.1.25) and I like reports.
With this feature it would be even better.
Regards
Libor

How can I see how often and where an image is used in the site?

Just realized the post appeared twice as at first sending I
got an error page (contains no data...).
So, please do all answer to the other post, so that all
replies get collected at one post only.
Hello,
please excuse my maybe dumb question but converting from
GoLive I am still trying to find several practical effective
workflow features in DW ...
1. where in the sitewindow/assets or files panel can I see an
indication at each image if and how often it is used in a site?
2. and where can I see/check on which pages it is used?
Thanks in advance for guiding me there ...
bye,
Beate

> How do DW users know how often and where an image is
used on the site
> then?
I'm not sure what the benefit is of knowing how often an
image is used, but
a search for the image by filename would do the trick.
And just so you'll know, this is a peer forum, not an
official communication
vehicle to Adobe. We are all just users here, not Adobe
employees.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"beatrice" <[email protected]> wrote in
message
news:[email protected]...
> OK. I sent the below feature request.
> How do DW users know how often and where an image is
used on the site
> then?
> always doing a find/search?
> in GoLive there was an simple window where all the files
a page consisted
> of
> were listed plus all the files that were pointing to
that page. such,
> without
> having to open a page links and image and componentes
etc. could be
> changed via
> point&shoot.
>
> Couldn't you all think of this a being great and helpful
and making site
> management easy? Then send in a feature request as well,
please.
>
> ...............
> How can one know by the assets or files list if an image
is used at all on
> the
> site?
> and how many times? and on which pages?
> This is very useful to know especially in larger sites.
> e.g. an image should get changed on one page, now it
would be very good to
> see
> if when it was used on other pages as well if it would
make still sense
> there
> when changed.
> as DW can update files (when e.g. an image name gets
changed) there is a
> way
> this is already recorded. why not take this records and
send this back
> into a
> list/column in the files panel to indicated that the
image is used and
> how
> many times.
> plus to have another window that can display all the
pages the image is
> used
> in.
> so one could click through all those pages and open them
to check the
> image
> there.
> in GoLive that feature was called 'In and Out links' and
one could see a
> page
> in the middle and left and right from it many
branches/lines at which ends
> the
> filenames were visible used in that page.
> so one e.g. could also point and shoot from this list
and change a file or
> image or component simply by point and shooting to the
files panel without
> having to open the pages.
> These features were so practical for an effective daily
workflow that I
> don't
> understand why they haven't been put into cool DW yet.
Please, please do
> so in
> the next release. I can test it thoroughly if you need
testers for it.
> bye,
> beate
>

How did Apple screw up the maps app this badly?

I am normally not a complainer, but rather appreciate great technology.
However, I am shocked beyond description about how badly Apple screwed up the maps application in IOS 6.
The maps application is the by far the most frequently used and most useful iphone application for me.
I rely on it all the time. It WAS so incredibly easy to use, and almost always dependable.
Yes, turn-by-turn directions would be nice, but not at the cost of screwing up so many other critical features.
I have now had 2 extremely frustrating experiences.
The other night, I was driving home from work and using the maps application to route to a store. I was using the voice instruction mode. There was heavy traffic so I wanted to zoom out / around to look for alternate routes. Well, this is almost impossible to do, and furthermore, there is much less accurate and detailed information about traffic conditions. This would have been a piece of cake with the old maps application.
Yesterday, I had to make a trip to Pacific Sales in San Jose.I tried "Pacific" with the mapped zoomed to the general area, and it could not find it.Then I tried "Pacific sales", again no luck. Its an appliance store, so I tried "appliances", and again no luck.
Finally, I had to log into the web, go to google maps, and find it there.
It was slow, but it worked!
1 month ago, I had the highest confidence in Apple due to their track record of deliverying great stuff that works and is easy to use.
I would never have considered an android phone.
However, this problem with the maps app has so shaken my confidence in Apple, that I will go today to look at a Samsung Galaxy III.
Maybe its not going to be my thing, but I hope Apple realizes how big they screwed up.
The Apple of Steve Jobs would never, ever, ever have let this happen.
The old Apple would have stayed with Google Maps for another year, and made this new maps app better, more reliable, and more user friendly than Android BEFORE releasing it. It would have been revolutionarily good and would have surprised us with how good it was.
I really truly love Apple and its products.
But this is a really bad mistake and I am so fearful that its an omen of whats to come in future from Apple.
I would not be surprised if this very deeply damages Apple at a time when the competition is getting tougher & tougher.
Of all the functions on the Apple Iphone, the maps are the heart and soul. Apple is probably right to go its own way eventually, but not like this!
It is just going to drive people into the arms of Android.
I am just curious, did Apple actually test this thing thoroughly before releasing it?
I mean, it took me only a few days to figure out this thing is total crap.
How did Apple not know this (which is a very scary thought), or maybe even more scary, maybe they did know but feel they have enough market power to get away with it? I can't think of any other explanations. So, which is it? Either way, its very bad news for Apple fans.

Ok, 3 more wonderful IOS 6 maps experiences to share!
When out shopping for paints, decided to visit Kelly Moore.
Used the maps app and used it to take me to the nearest store, except it was not where maps said it would be!
I called the Kelly Moore store, and they told me the maps app has the wrong town, and they have had many customers with the same problem!
Next up, I was looking for a Sherwin Williams store in San Jose, so maps took me to El Camino Real, except it took me to the wrong end of El Camino Real in Santa Clara, about 15 minutes from the right destination in Mountain View! In fact, the app took me to Santa Clara University!
Last up, I was looking for a Chevron station. Apps routed me to the location, but no gas station.
So, I finally decide to use google maps through the browser, and it ends up it was again the right address but wrong city!!!!
Unbelievable! My confidence in Apple has been further shaken, to where I am about to give up.
I just can't trust their app, which is something I depend on every day to save me time, money and gas.
So disappointed in Apple right now... It makes antenna gate look like a minor incident, which it was in my opinion!

How do I take movies and save them on the iPad?

How do I take movies and save them on the iPad?
Thank you for your help.

Tank you Jim for responding: "(swipe Video to the selected position - don't just touch it)."
(I can't believe this!) I open camera. tap video: nothing. Swipe video button (where to?) nothing.
Reading videos at a glance in the iPad user guide gives me nothing. I know I must be missing something.
Thank you for your help.
Walter

How often are the maps in the Maps app updated?

The Maps app couldn't locate a 2 well known stores right off of the highway that have existed for well over a year, possibly 2. The location is seen in the iOS 5 Maps, but there's nothing but an empty location in the iOS 6 app. How frequently are locations updated?!

The satellite imagery on Apple Maps shows that whole area as undeveloped woods. Google shows a brand new building with the nearby streets.
Use the "Report a Problem" button on the Maps to inform Apple of the required update.

HT4061 how do you take someone old own icloud off the phone

i have just got a iphone4 a ues on e but what i am wanting to no how to i take there old how do you take someone old own icloud off the phone so i can use the phone

Is the phone running iOS 7? If so, then you would need to know the Apple/iCloud ID and password of the previous owner in order to remove the iCloud account from the phone.
If you don't know the ID and password, then you should return the phone for a refund.
Sorry,
GB

I have An iphone 5... And when I take a picture it appear on the photo app on the middle of the screen and not on the whole screen.. How can I fix it?

I have An iphone 5... And when I take a picture it appear on the photo app on the middle of the screen and not on the whole screen.. How can I fix it?

Definitlely have it looked at. That could be a hardware deffect on the maker(apple) so there could be a definite replacement option.

How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app? When I leave the car and return to continue hearing a book, it has switched to iTunes.

How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app? When I leave the car and return to continue hearing a book, it has switched to iTunes.

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

How do I take a photo and make it the shape of the object I choose, eg. oval, etc?

How do I take a photo and make it the shape of the object I choose, eg. oval, etc?

I am not in front of a Mac at the moment but believe it is:
select the image > Menu > Format > Mask with shape > choose oval
Peter

How can i save my Test Stand report as the serial Number?

Hi, I'm using TestStand 3.0 and LabVIEW 7.0 I want to know how i can save my TestStand generated report as the UUT serial number. Thanks

Hi arj,
Within the Report Option in the Report File Pathname Tab is a control 'New UUT Report File for Each UUT'. Enabling this will include the Serial number in the Report Filename. Unfortunately its formated into the filename as '[serial number]'.
This is done in a step in the Process Model - Test UUTs or Single Pass. This step is called 'Determine Report File Path' which is a dll call to a function in modelsupport2.dll. This returns the full pathname to the report and stores in Locals.ReportFilePath.
So you have the option either modify the Locals.ReportFilePath or modify the Function in modelsupport2.dll and rebuild the DLL.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

How do I close a numbers document without closing the entire app?

Can anyone tell me how I can close a numbers document without closing the entire app? i.e. go back to the folders display page - is this even possible?

It is not a bug, but a new feature.<br />
Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or other menus like the Edit menu (Alt+E) and Bookmarks menu (Alt+B) and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=626825 bug 626825] - Hide redundant menu commands unless the user invokes the menu using the keyboard (make use of the openedWithKey attribute)
''(please do not comment in bug reports; you can vote instead)''
See also:
* [[/questions/799856#answer-155765]]

I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

I currently have the Mac OS X v10.5.8 and want to get the new operating system but I don't know how to do it. I don't have the Mac App Store and can't get it because of my version. What do I do?

The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is still $29. You must have at least a model 2,1 MacBook.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

How often Apple take care of user reports on the Maps app?

Similar Messages

Maybe you are looking for