How often does Best Buy change the value of video game trade-ins?

Last week, I decided I was going to trade in Batman: The Arkham Knight for the XB1, so I went on the Best Buy website to see how much I was going to get for it and it said $35. Cool. So, I checked the website today and it said it was valued at $32. Can anyone explain how values change so frequently? Just trying get an understanding how Best Buy fluctuates trade-in values.

supply and demand.
Next week it will probably be lower.
And say by chance they get 2000 used Arkham Knight games in it will go down to $5 on a trade in or so.
Best Buy has to try and then resell it.
Right now used copies are going on certain Auction web sites for $39 and less.
The trade in values of games tends to go down pretty fast.  Especially those that were huge sellers.  Lots of them out there.  And lots of people have finished and are looking to unload.

Similar Messages

  • How can I get and change the values of Withholding tax grid in MIRO trx

    Hi everyone,
    I have a requirement where I need to get and change WT_WITHCD field in MIRO's Withholding tax grid. Is there a function module / Badi to do this? I used MRM_HEADER_CHECK, but the parameters related with this badi doesn't have this value.
    Do you have any idea?
    Thanks in advance!
    Regards.
    Leo.

    Hello Leonardo,
    You can change that table with help of the filed-symbol in the BADI MRM_HEADER_CHECK.
    LOOP AT ti_drseg INTO ls_drseg. 
      lv_index = sy-tabix.
      LS_DRSEG-MWSKZ = 'I0' . " < For example
      MODIFY ti_drseg FROM ls_drseg INDEX lv_index.
    ENDLOOP.
    FIELD-SYMBOLS: <drseg> TYPE mmcr_tdrseg.
    ASSIGN ('(SAPLMR1M)ydrseg[]') TO <drseg>.
    <drseg> = ti_drseg[].  " this will modify the data in MIRO with your modified data
    Regards,
    Naimesh Patel

  • Exit to change the value of  eban-ekgrp and ekko-ekgrp

    Hi all,
    which user exit is the best to change the value of eban-ekgrp and ekko-ekgrp

    Hi Deva,
    My client wants to control the desired purchasing group matched with material group during creating/changing OA, PR & PO.
    So I created customised screen to map between purch group & mat. group .
    I have to find the appropriate exit/BADI to change the pruch. group  regarded the mat. group is found in the customised screen.
    For PR/PO, i have found the BADI, for OA , i still dont know which exit to use .. pls advise..
    thanks,
    Ester
    Message was edited by:
            ester johannes

  • How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

    How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

    However, the sync action only triggers every 60-minute and there is no user-configurable option provided. Although one can put a Sync icon onto the toolbar for easier access, it is still far from practical needs.
    To unlock this limitation, do the following:
    1) Type “about:config” at the address bar
    2) Search for “services.sync.syncInterval”
    3) Change the value from 3600000 (milliseconds = 3600 seconds = 60 minutes) to any value (in millisecond) of your choice
    4) Close and restart Firefox
    The Sync action will now trigger at the interval you just set.
    from: http://tomtsui.wordpress.com/2011/04/29/modify-firefox-sync-interval/

  • How can I change the value used in a Criteria Rule in a Subscription agent

    Dear mobile heroes.... How can I change the value used in a Criteria Rule in a Subscription agent in a quality environment? (CRM 70 SP04).
    I have built a subscription agent in dev, which uses a static where clause to filter activity_object on VKORG. I need to filter on a different VKORG value in the quality environment, but when I change the value of the sales org, the change is not saved. I have tried this even non 'activated'  subscription agents, but it still does not appear possible to change and save the changes.
    This poses a big problem because the VKORG value I want to use does not even exist in the dev environment, so I could not even rebuild in dev and transport the new agent to quality. Can anyone help me?

    Too old to care now.

  • How do I change the value of the Order By field in an MP3 file?

    good day Guys,
    I'm new here in the forum and I have a question that is "breaking" the order of my songs and my head too ...
    How do I change the value of the Order By field in an MP3 file?
    for example, in the photo below, the song "The Bad Touch" is coming BEFORE the song "A Little Respect", this happens because of the Name field to Order ...
    My "problem" is in the photo below, the "tab" Order, iTunes will not let me erase what is written in the "Sort As" ...
    I've been "collecting" several songs over SEVERAL years
    I'm currently with more than 1,500 songs on HD and several backups on DVDs and external hard drives and I think, download it again, will be a "little" laborious and boring
    I DON'T WANT to be filling the tags of songs (name, singer, CD, year, etc.)
    I have used the program Mp3tag to remove the music tags
    I've tried to download the song again and go through Mp3tag program as if it were a new song
    I've changed the music access permissions, folder and even entire hard drive (my Windows has only one user)
    I've tried to catch the song again, from a previous backup
    I've tried to create a copy of the file at iTunes own
    I've tried to create a new music file in a music recording program
    NOTHING of what I did above resolved
    -> I'm using Windows 7 64-bit Ultimate
    -> I'm using iTunes 12.1.1.4 for 64-bit Windows
    -> My iPad is the third generation (a little old, I know) with Wi-Fi and 3G, but it has served me VERY WELL
    -> The iPad is updated with iOS 8.1.3 and is not unlocked
    I'm sorry for the GIANT post, but well, I think I could explain as much as possible and for my English, too bad, by the way, I'm from Brazil and I'm using Google translator
    Hugs and await answers,
    Paulo Ricardo

    hello turingtest2,
    my language is Brazilian Portuguese (there are some little differences between Brazilian Portuguese and the Portuguese of Portugal, but nothing that interferes with the script)
    at this time, I'm managing songs manually, I don't know if this will interfere with the execution of a script or command
    as I picked up this iPad recently, I still don't understand how to set up the iTunes Music Library and the person who gave me, told me it was easier to put the songs manually
    as you said, in my iTunes, 95% of the songs are with ALL the blank fields, including the Name to Sort field, only songs that begin with a/an/the standing with the Name to Sort field filled with name of the song, without the a/the
    I do not know what to do...
    I want to learn to ride the iTunes Music Library, that my work is less
    you know any site that teaches create/manage my iTunes Music Library?
    this site/forum may be in English, no problem
    thanks for all your help and the help of others who responded to my request

  • How to disable or change the value of h:commandlink jsf component

    Hi,
    I am a student. I am using h:commandlink. I need to change the value of the component once it is clicked by the user. How do i do that?
    If i cannot change the displayed value of the commandlink. I am thinking of atleast disabling the link once the user clicked., to avoid the link being clicked more than once by the user.
    <h:commandlink id = "follow" action = "usermanager.followdoctor" value = "Follow"/>
    Usermanager is my managed bean class for this jsp page. The value "Follow" is the one that i want to be changed to "following" once it is clicked. Please help me. Thanks for your time in advance.

    Hello qimbal2,
    Thanks for getting back to me. you are right , i should disable the link as soon as it is clicked. I went ahead and implemented this logic by using a property in my bean class and binding that property to the value of my link. I wrote the logic in my action method in such a way that when i click on follow for the first time, the value of the link would change to 'Following' and the link would be disabled. It works for me now.
    Thanks,
    Suha

  • How to change the Value of a Varible while debugging in ECC 6.0

    Hi all,
    How can i change   and Save the Value of a varible while debugging a FM in ECC 6.0.
    I can able to change the Value of a variable by clicking the Pencil Icon (Change icon) which is there next to that value
    But i am not able to save that value
    Please give the suggestions
    Thanks in Advance
    Regards
    Ajay

    Ajay,
    I think you are changing more than one variable value at a time...this things generally happen in this case.
    Go step by step.....
    Press on the pencil button
    value filed becomes editable
    change the value
    and at once press the enter
    the ediatble field automatically becomes non editable, and hence retain the changed value.
    Pooja

  • How to change the value of a variable in new ABAP debugger.

    Hi Guys,
                 I can't change the value of a variable in the new ABAP debugger.. when I change its revert back to old value. but this is not the case with the old version. How to do this..
    Cheers
    Senthil

    Hi,
    1. Dobule click in the variable in the variable tab.
    2. Click the Change icon in Detail.Dis.
    3. enter the new value and press enter
    Refer
    [http://www.sapdb.info/new-abap-debugger/|http://www.sapdb.info/new-abap-debugger/]
    [http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm]
    <removed_by_moderator_together_with_points>
    Regards,
    SB
    Edited by: Julius Bussche on Jun 24, 2008 8:21 AM

  • How to change the value of Valuation class.

    dear friends:
    i want to change the value of Valuation class in the material master .but system  warning info occurs .
    The valuation class cannot be changed
    Message no. M3 368
    Diagnosis
    You wanted to change the valuation class. However, this is not possible because one or more of the following already exist for the material:
    Valuated stocks in the current period or in the previous period
    Open purchase orders or delivery schedule lines
    Production orders for which a goods movement has already taken place
    System Response
    Your change is reset by the system.
    Procedure
    If valuated stocks already exist, you can change the valuation class only as follows:
    a) Post the stocks of the material to an interim account.
    b) Change the valuation class in the material master record.
    c) Post the stocks of the material back to their original account.
    If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
    If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to Deleted.
    Procedure for System Administration
    In Customizing for the Material Master, you can switch the check for open purchase orders and/or for production orders to a warning. You do this in Define Attributes of System Messages by assigning the message type Warning to message MM 326 and/or MM 327 respectively. However, first ensure organizationally that further processing of the open purchase orders or production orders cannot result in inconsistencies.

    To resolve SAP error message M3 368 I would suggest that you refer to SAP note number 1967543. This note outlines the issue and a resolution to it:
    Please have a look at the description of the error M3 368. This error may occur if one or more of the following already exist for the material:
    1. Valuated stocks in the current period or in the previous period
    2. Open purchase orders or delivery schedule lines
    3. Production orders for which a goods movement has already taken place
    Resolution:
    If you have valuated stocks in the current period or in the previous period, you will get message "Stocks already exist.". You have to clear all the stocks both in current period and previous period. Please have a look at SAP Note 30656, it shows an example on how to clear the stocks in
    previous period. You can use transaction MIGO to execute this step.
    If you have open purchase orders or delivery schedule lines, you will get message "Purchase orders already exist.". You can find related purchase orders after you click 'Display Error' button. Please delete them in transaction ME22N.
    If you have production orders for which a goods movement has already taken place, you will get message "Production orders already exist.". Please archive these production orders. You need to set deletion flag for these orders firstly and go to SARA, use archiving object PP_ORDER to archive
    these orders.
    Kind regards,
    James

  • How to Change the Value Field Type of a Value Field

    Hi,
    How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is there any other changes that I need to make so there is no side issue of this change?

    Hi Prem,
    Once you created value field as quantity or currency, you can not change this nature of value field. Based on this, system creates lots of data and tables. For this reason system will not allow any changes in quantity or currency.
    Alternative way is to remove the old value field and  create a new value field assign to operating concern and put all your seetings.
    Please let me know if you require any clarifications.
    Thank you,
    Regards,
    Santosh
    Reward points if helpful.

  • How to change the value of Label in runtime

    Hi All,
    I want to change the value of the Label in runtime. Is it possible to change? If so then can you please let me know how to do it?
    Regards,
    Raghu

    Hi Ram,
    Check the below thread
    Dialog program - label problem
    The above thread has been updated just couple of hours ago only
    if it is Standard Screen then try using SHD0 Tcode , but this donot dynamically change the Field labels
    for more info go through Transaction Variants might be helpful,
    This demands Field Exits to be implemented
    Cheerz
    Ram

  • How to change the value of  COMPANY_NAME in "Subject:%COMPANY_NAME% Welcome to SAP Sourcing

    Hi All,
    Can some tell me How will I change the value of COMPANY_NAME which will reflect in subject of Final mail.
    For more clear picture the subjectis"
    Subject:%COMPANY_NAME% Welcome to SAP Sourcing .
    The change vlaue of COMPANY_NAME should refleat in final subject of the mail.
    Please help me in urgent.
    Thanks
    peeyush ranjan

    Hello Peeyush,
    Because I am unaware of your exact config, I'll try to provide a generic answer:
    1. Go to Setup -> Mail Configurations
    2. Identify the Mail Configuration for the Company you want to change
    3. Click on the highlighted Company link
    4. Change the highlighted Name:
    Regards,
    Bogdan

  • How to change the value in an Integer object?

    Hi,
    Is it possible to change the value that is contained in an Integer object.
    I know Integer objects are immutable. So it might not be possible to chage to value in an integer object once its been initalized a value @ the time of construction.
    Also does autoboxing and unboxing feature of 1.5 help acheive this?
    Please let me know of any other alternative
    Thanks
    Deepak

    Tried the autoboxing and unboxing feature doesnt
    help.It doesn't help in general. But in this special case it doesn't help because it doesn't anything to do with it. Do you really know what you're doing?
    So across the function its not changing the value.
    As I have created an object of Integer class and
    passed a reference of that object into the chage()
    ,So any changes should have been reflected
    acrosss method calls.?Since you let the newly created parameter-reference a point to a new Integer object: no. Why? You have two references to I(31). Then you move one reference to I(33). Why should 31 get another value?
    Does the the java compiler creates a new Integer
    object each time it does autoboxing Not necessarily. Some values are pooled. Actualy, the JVM does it. The compiler never creates any object.
    so that the value
    is lost across method calls?That's not the compiler's or the JVM's fault. It's all a misconception of yours.
    Is there any means to achieve this?What for?
    int a = 0;
    a = change(a);
    int change (final int i) {
      return i + 12;
    }Does exactly what you want, without side-effects.

  • How to change the value from one input control to another input control?

    Hi Experts,
    I want to change the value from  one input control to another input control. For Example if i change month in first tab. it should reflect in second tab also. How should we acheive through input control or some other option.
    Here I attached screen shot.Please help me for this

    Hi,
    It is not possible to have Input controll in all tabs that will be set from another .
    But There is one workaround .
    Follow the link below .
    http://davidlai101.com/blog/2013/08/13/web-intelligence-input-control-that-affects-all-tabs/

Maybe you are looking for