How OIM identifies an account as a service account while doing recon

Hi,
Can anybody tell me how OIM identifies an account as a service account while doing reconciliation?
I have the matching criteria for the scheduled task to identify service account. After doing the recon, i want to link with OIM identity showing it as a service account under the resource tab? How can i do this?

Thank you so much Kevin. I want to check whether the recon insert is of a system account(AD) and if yes, i need to mark the account as system account.
I could see only the "tcServiceAccountActivate" eventhandler available in the recon insert task. I am working in OIM 11g. Will this event handler be useful in anyway to perform my job? If not, please throw some light on how to achieve this? I am newer to OIM.
Also i want to know whether OIM identifies Admin Accounts? I have lots of Admin accounts in AD which i need to associate with OIM profile.

Similar Messages

How to make users accountable while they record results

Dear Gurus
I want to add accountability to QE51 while result recording so that i can check which result is recorded by which user. How can i make users accountable while they record results? Kindly help me on this

Hi Dear,
Yes you can make user more accountable while doing the Resul Recording(RR) as well as Usage Decision (UD) THROUGH TRANSACTION CODE qe11, qa11, qe51n using "Electronic Signature' functionality.
By this functionality you can also controlled the user while doing RR and UD using Authorisation.
By implementing the electronic signature functionality - you can see who had done RR/UD on what date, time also you can track who had attemted to do the RR/UD using Transaction code DSAL.
I hope this will help you.
Regards,
Rahul

No rfc destination defined for global trade services error while doing migo

Hi all,
Pls help me in fixing the following error..
"no rfc destination defined for global trade services" error while doing migo

i guess you will be getting dumps in the background in ST22. Can you please check this and post the details if there are any dumps?
Meanwhile, check this note:
Note 1098491 - MIGO:Termination MESSAGE_TYPE_X with IO 304 (subcontracting)
Cheers,
Jazz

Order Type wise GL Account While doing Good Issue.

Dear All,
Good Day,
We have Different types of Plant Maintenance Order , now when we do Goods Issue against the order we need specific GL Account based on Order type.
Example: Preventive Order should need XXXX GL Account
Corrective Order Should need YYYY GL Account.
thanks in advance.
Best Regards,
KSK

hi
when any material is issued against the order the G/L account will capture according the valuation class specified in the material master record and the corresponding cost element assigned to the valuation class.
once you get the material and after the work is completed you can settle the cost to the G/L account provided the settlement profile allows that.here you can maintain different settlement profile to the each order type
regards
thyagarajan

System is not recording the Service details while doing recording of ML81N

Dear PP experts,
Please help me on this.I am doing the recording of transaction ML81N through SHDB but system is not capturing the fields of formula variables while maintaining the service details only. else everything it is capturing.. please suggest me what to do.
Thanks & Regards
Nitin Kapoor

Expert please respond to the query.

How could a java process bypass etc\hosts file while doing dns lookup ?

Hi,
I am developing a java web proxy and developer tool [http://www.tcpcatcher.org|http://www.tcpcatcher.org] .
Right now it is working as a none transparent web proxy.
In some situation and for some hosts, I would like to turn it into a transparent web proxy.
Suppose, user's browser and java proxy are running on same host (typically on localhost). An entry is added in etc\hosts file, for example:
127.0.0.1 google.com
So without any change in browser config , if user visits google.com with its browser , http request is received at proxy level.
Now my proxy has to get the actual ip address of google.com bypassing the etc\hosts file (right now the proxy is doing a loop on itself).
Any idea how this could be achieved ?
Am I searching in wrong direction ?
thanks !

This is a shot in the dark, but I'll try anyway.
Take a look at dnsjava (open source, I never played with it).
My understanding is that using this to resolve names instead of normal Java API's would allow you to bypass etc/hosts in the java code
(see [http://old.nabble.com/DNS-Resolve-from-hosts-file-first-then-DNS-Server-td15431381.html]).

How to find out the column causing the error while doing update or insert

I'm getting the below error when attempt to update or insert a long string that is more than its defined length in the DB2. For example in table the column length is defined as 50, however from UI the data for that column is more than 50 chars.
{color:#ff0000}**Caused by: com.ibm.db2.jcc.b.SqlException: DB2 SQL error: SQLCODE: -302, SQLSTAT**
**E: 22001, SQLERRMC: null**
**at com.ibm.db2.jcc.b.hh.b(hh.java:1369)**
**at com.ibm.db2.jcc.b.hh.c(hh.java:1356)**{color}
The above issue can be fixed by setting maxlength in the UI itself. However in my case, there is a backend program trying to insert or update load of records. If the exact column name causing the error is known, it will be helpful to load the data properly in the next attempt.
I have worked around it using SQLWarning and DataTruncation, but couldn't find the solution yet.
Any help on this issue will be really appreciated.

Medraf wrote:
what is validator? Is it like validation.xml in struts? Are you suggesting like defining set of validation rules in the xml and apply the same for each record before doing any update or insert in DB? If so, then I could implement this validation logic in my backend code, however it may take more time to complete the batch prcoess.
How you implement doesn't matter.
However given a schema generating code for such validation is trivially simple at least for field types and sizes. Relationships are harder but those can be handled via custom rules.
Alternatively I'm looking for some kind of API in JDBC or Hibernate which gives the detailed sql exception message containing the error info like the column name and the reason for failure while update or insert. If not possible, then validation logic needs to be implemented.Having seen something similar in Oracle years ago I seriously doubt that you are going find it magically appearing in JDBC/hibernate. There might be warning on the SQLException (see the java docs for SQLException) but I wouldn't count on it. Other than that the only possibility is making some sort of call in db2 itself that tells you the error. Only problem with that is it might require the context which might not be available once you see the error (presuming, especially for performance, that you are using batch processing.)
As a start figure out how to find out using only db2 (docs and/or db2 forums.)

Alternative Reconcialtion account while doig the MIRO

Hi All,
One of the cleint required alternative Reconcialtion accoutn while doign the MIRO. Scenario like this there is one Vendor 'A' used supplies Raw material and Serives to company. Business is not intrested to create new vendor. But they needs different reco accounts for one vendor master.
I did mentioned customization in SPRO :-
1. Maintain the Alternative Reco accounts
2. Select the ready for input check box of Recon accounts.
But still system is not accepting to change reco account while doing the MIRO. Change happens while doign the FB60
Rgds
SumaMani

HI sumamani,
As you are aware that it is not possible to change the reconciliation
account in MIRO.In transaction FB60, it is possible to change the field
value. SAP give us only the permitted account maintained in the
customizing table THKON.
In MM, the accounts are automatically determined from the
customizing in transaction OMWB, or taken from the purchase order
account assignment data.You can also have a quick look in tr OMRMB,
you will notice that field INVFO-HKONT is not there to be customized.
There is no solution available within the SAP standard system for the
change of the reconciliation account for the vendor.
According to the information I got from the responsible development
department I can only inform you that the required functionality will
not be implemented in SAP standard for MM invoice verification.
Field in question is hard coded and can not be changed.
MM invoice verification was developed to finish the external procurement
process in logistics and check the invoice data sent by the vendors for
correctness (differences) and to post the corresponding accounting
document in FI additional.
Creating manually creditor invoices in FI have no relation to a logistic
process.
Therefore not all functions included in FI (FB60) are included in MM
invoice verification (MIRO) as well.
reg
Madhu M

How to get Contract Account Number in Service Ticket

Hi Experts,
How to get Contract account number in Service Ticket, we are working in ISU environment. when i create the service ticket the contract account number is there in Business agreement number field in service tiket.
Can anyone tell me how to retrieve that field.
Answer will be appreciated.
Praveen

check tables tfk_buag_ref and fkkvkp

How To Run OIM Under Weblogic As A Windows Service?

Hi
does anyone know how to run OIM under Weblogic as a windows service?
Many thanks in advance,
Evanela

Hi
Does anyone know how to run OIM under Weblogic as a windows service?
I have used "Setting Up a WebLogic Server Instance as a Windows Service" (http://download.oracle.com/docs/cd/E12839_01/web.1111/e13708/winservice.htm#START143), but It doesn't work because OIM use the xlStartWLS.cmd file and not startWebLogic.cmd.
thanks!
Edited by: user13082223 on Sep 29, 2010 9:09 AM

How can i make account in apple global service exchange

how can i make account in apple global service exchange

When you find the answer please let me know...

Setting up OIM to start as a Windows Service running under Weblogic 10.3.2

Hi,
On recommendation from our Oracle Rep. we have begun migrating our existing OIM installation on Oracle AS to a Weblogic Application Server. As such we are looking for a way to get the OIM application to run as a service in windows - so we dont have to start it manually after a reboot and so that system monitoring can alert us if/when the application crashes for some reason.
I have asked Oracle support - which basically said that no such howto/documentation exists and that "One needs to debug on their own when face any issue." (whatever the h*** that means).
I was thinking that we werent the first customers trying to get the OIM webapplication to start automatically under weblogic and that someone must have figured out a way to accomplish this ?
Any advice on how to do this will be greatly appreciated.
Thank you in advance.
/Jacob

Hi Jacob,
See this post that I answered few time ago. Re: Keeping Remote Manager running - Windows
Our OIM is running as a Windows Service.
REnato

TS4002 Issue for families: How do I create separate iCloud accounts while retaining a joint iTunes account?

My family has previously used the same iTunes account. Now that we all have apple devices, the iCloud feature is mixing our contacts, calendars and messages. How do I set up individual iCloud accounts while retaining the current joint iTunes account (so that I can manage the payments for iTunes purchases)? I cannot figure out how to change the current iCloud account (which is the Apple ID I have used for iTunes for years) on either my Mac or my iPhone. It seems that once you have set your iCloud account, you cannot change it. Any advice out there?

No: @icloud.com is an Apple email address. To create a new Apple ID you need to start with an address other than @icloud.com, from any other service. Then you go to http://appleid.apple.com and follow the procedure to create a new ID: then you can sign into System Preferences or Settings>iCloud with it. When you enable Mail in the checklist you will be asked to create a new @icloud.com address. You can't transfer an @icloud.com address from one account to another.

How do I use Cisco Registered Email Service with 10.7?

I received a email via someone using Cisco Registered Email/Envelope Service. The authentication process required the latest version of JAVA for 10.7, which I downloaded and installed. When I try to logon, the screen hangs with the message "Loading Envelope Tools." If I press "open" again it states "Inactive tools." The alternate method is to open the mail via a secure Web site, which I can open, but I am unable to download attachments. To download attachments, I am directed to a page that begins with "x-msg:" and I get a message that says: "Safari can't open the address .. . because MAC OX doesn't recognize Internet Addresses starting with "x-msg:"

Thanks for the info Roger, this is indeed did work for me (at least the part about signing in on apple.com, haven't tried the rest). Since Apple does not allow for the merging of Apple IDs, my plan is to use the old me.com address (from the free trial) with iCloud but then forward all the messages from the old me.com to my current Apple ID. Problem is all my devices are already associated with iCloud. So... if I want to activate iCloud using the old me.com, how do I do it?
I have two ideas: 1) as you suggest, signing out and signing back in through the iCloud preference pane (either on Mac OS or iOS); but I'm worried this will have consequence - will I be able to sign back in to my main Apple ID account after doing this?
2) create a new user on my Mac and then sign in to iCloud with the old me.com address there, then delete the account.
Thanks for any help with this.

The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.

VSS-00011: Connection to database instance <instance_name> failed.
Cause : The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.
Action : Run the Oracle VSS Writer Service in a user account that can connect to the Oracle instance with DBA privileges.
I have assigned ora_dba group to the user that runs the Oracle VSS Writer Service which is the only Oracle solution but still getting
the above error. Was advised to raise the issue here that it is an OS issue. Pls help

The user account cannot access Oracle Database instance. And also how do you temporarily disable security software on the server.
Have you checked what I already asked for? "Try using the user account and access the Database Instance.
That will let you see if the problem is with the user account permissions or not."
If this does not help then you can contact Oracle as suggested by Dave.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How OIM identifies an account as a service account while doing recon

Similar Messages

Maybe you are looking for