How One EP Portal will connect the 2 Different System(ECC Europe,China)

Hi Friends,
I have one more doubt on Multi region Functionality. Here we are using single EP Portal. Depending up on user we are able to connect to the ECC System.
Ex: Here we are using 2 ECC Systems( ECC Europe and ECC China). In Portal ECC Europe is login into the Portal he will be able to connect ECC Europe System through ECC Europe Model data and Meta Data like as ECC China user Login into the Portal he will be able to connect ECC China System through ECC China System Model data and Meta Data.
How can I do this work. Can you tell me. What type of coding I can write here. Please give Help.
Regards
VijayK

Hi Vijay,
Not just multiple Systems/JCos needed, you also need multiple souce objects to connect to multiple Systems/JCos.
In your case you need multiple iView (applications), and configure them to connect to different back-end systems.
You got to modify the Application Parameter of WD iView objects saperately to talk to different systems.
Reason, you cannot make one application to use multiple JCo destinations at any point of time.
Thanks,
MS

Similar Messages

Each portal AS connected to different systems

Hello,
I have the following question from one of my colleague :
We have one portal with two AS (loadbalanced through SAP Webdispatcher), and one java SRM with 2 AS also. Is it possible to connect EP AS 1 to SRM AS 1 and EP AS 2 to SRM AS 2 ? So we will do a kind of connection balancing....
For me it is not possible because the connection configuration depends of a global parameter.
The best solution (which is our target) is to do loadbalancing with a Webdispatcher dedicated to SRM java but we encountered some problems...
thanks for your help
Thomas

Thomas,
I assume you have already read this document:
http://help.sap.com/saphelp_nw70/helpdata/en/48/9a9a6b48c673e8e10000000a42189b/content.htm
Your case is High Availability with Parallel Web Dispatchers:
This procedure cannot be used in the following scenarios, unless additional effort is put in to setting up the configuration):
- Web Dispatcher is positioned in front of a back-end system with Applications in the Enterprise Portal (see example below)
- The Web Dispatcher is operated with the ROUTER protocol (End-to-End SSL)
right?
br,
Tobias

I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy. I have never had issues with any of our phones connecting the the cars Bluetooth until this one sometimes it will connect and sometimes it won't. I drive a gm car

I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy. I have never had issues with any of our phones connecting to the cars Bluetooth until this one sometimes it will connect and sometimes it won't. I drive a gm car. A friend of mine drives an Acura and said she is also having the same problem? I have to connect the phone every time I get in the car.

Turn Off BT on your Phone & ReBoot..
Delete the phone from the vehicles memory..
Restart the Vehicle & go thro' the Pair set up..........

Protein powders are one, creatine will be the different.

Best Bodybuilding Cutting On Diet
One thing you shouldn't do is confuse supplements. This is a frequent myth that many people create. The stark reality is that products have nothing regarding steroids in any way. Infact, many supplements are only and natural support not and to improve your
bodybuilding teaching influence any hormone levels.
By selecting the Best Bodybuilding Ultimate Muscle Black Edition Supplements for you, you will be cost money. It's a great deal of neglect and strike. Don't consider your friends' word because of it. You'll need to get some items and find out everything
you like yourself. You will find not many certainties in the product organization. There are likely only a few on the market. Protein powders are one, creatine will be the different. Those are two types of products that benefit almost everybody. Creatine will
probably be included in just about every bodybuilding product you can find. Creatine are available alone or it can be included in pre workout products as well as in certain meats.
http://alphajackedhelp.com/ultimate-muscle-black-edition/

Apple is not here.
There are only users here like yourself.
We can do nothing at all about any devices on you AppleID.

How Sender SOAP Adapter will retriew the data to process further

How Sender SOAP Adapter will receive the data to send the integration server to process further

Hi,
1. All details are always taken from the Sender Agreement.
For the Sender File adapter and the Sender SOAP adapter , the details that include are , Sender Service, Sender Interface Name and namespace and these are the details that make up the SOAP header when the message hits the integration Engine.
Once the corresponding Adapter for the message is identified, ie. the Sender SOAP adapter , the message for the SOAP header is then taken from the Sender Agreement of that adapter. This is the exact reason why one Sender Adapter can be involved in one and only one Sender Agreement.
Regards
Bhavesh

How to configure portal server with the Backend Oracle database

Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.

HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************

My iPod Touch is connected to my house internet and every few hours, it doesn't work so I have to shut it off and turn it back on which makes my iPod slower, how do I make it connect the whole time?

My iPod Touch is connected to my house internet and every few hours, it doesn't work so I have to shut it off and turn it back on which makes my iPod slower, how do I make it connect the whole time?

Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591

I have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb

i have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb. Any answers? please

You can sync your iPod with multiple computers, but what can be synced is very limited. See this article for more details.
http://support.apple.com/kb/ht1202
B-rock

How can i find out all the different meanings of User ID Paramtrs (USR05)?

Dear Gurus
How can i find out all the different meanings of User ID Parameters (table USR05)?
Thanks
Nuno Natividade

hi,
   the values are stored in the table tpara and they are used to put the landscape of the system,and to know the log of the system.
FORM DETERMINE_LANDSCAPE .
    SELECT SINGLE * FROM USR05
                    WHERE BNAME = SY-UNAME
                        AND PARID = 'ZLANDSCAPE'.
    IF SY-SUBRC = 0.
      IF NOT USR05-PARVA IS INITIAL.
   REPLACE
      ELSE.
        PERFORM DETERMINE_FROM_CENTRAL_SYSTEM.
      ENDIF.
    ELSE.
      PERFORM DETERMINE_FROM_CENTRAL_SYSTEM.
    ENDIF.
ENDFORM.                    " determine_landscape
FORM DETERMINE_LOG_PARAMETER.
    SELECT SINGLE * FROM USR05 WHERE BNAME = SY-UNAME
                        AND PARID = 'ZLOG_USER'
                        AND PARVA = 'X'.
    IF SY-SUBRC = 0.
      WITH_LOG = 'X'.
    ENDIF.
<REMOVED BY MODERATOR>
venkat.
Edited by: Alvaro Tejada Galindo on Mar 4, 2008 12:47 PM

How to limited Media Encoder connect the media server?

how to limited Media Encoder connect the media server?
I have a adobe media server3 for liniux and hava a live IP.
I can use the Media Encoder connenct the media server anywhere when I use the live IP.
I want to know how to limited Media Encoder connect the media server.
thank you!

You can use an authorization plugin, or you can use server side actionscript to validate credentials (as of FMS 3.0, you can use get variables in the RTMP URL)

Dreamweaver sudenly stopped connecting to website, fine one day then cannot connect the next. I can connect using CUTEFTP any suggestions what has stopped dreamweaver from connecting?

Dreamweaver suddenly stopped connecting to website, fine one day then cannot connect the next. I can connect using CUTE FTP any suggestions what has stopped Dreamweaver from connecting?

Have you tried clearing DW's program cache yet? That's usually my first step if something "just started happening"...
Deleting a corrupted cache file
Server updates can cause DW to need a setting change. Have you already tried toggling Use Passive FTP in your site settings yet?
Has anything changed on your local network, like an update to a firewall?
If you are connected via wireless router, a low likelihood but possible thing to test would be a wireless router problem. Try connecting the computer directly to your modem, bypassing the wireless router (if you aren't using an all in one modem/router setup) to see if that makes any difference.

VMWARE Server2012RT Installation failed with option: I will install the Operating System later

Hello, first sorry for my englich but I hope it wille ok for this Issue.
I have instelled the Win2012RT Server in VMware but the Installtion failed with this error:
Ok i chose the option: "I will install the Operating System later.",
and also tried
this:
http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
However, I always get
this displayed:
Last Log entry is this one:
2014-05-07T09:42:03.962+02:00| vmplayer| I120: VMMgr: Finished opening VM at /vm/#cf2324dcf779001d/ from G:\VMs\Server2012RTVmware.vmx
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: main UI rect: 687x619 @ 948,249
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Found 0 present screens
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Windows for extra guest monitors will not be shown
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: setting main view to all displays
2014-05-07T09:42:03.978+02:00| vmplayer| I120: SnapshotTree: Emitting refresh (G:\VMs\Server2012RTVmware.vmx)
2014-05-07T09:42:04.009+02:00| vmplayer| I120: VMHSVMCbPower: G:\VMs\Server2012RTVmware.vmx, Setting state of VM to powerOn with option soft
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Stats VMX "G:\Programme2tePlatte\vmware-vmx-stats.exe" not found. Using standard VMX "G:\Programme2tePlatte\x64\vmware-vmx.exe"
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VigorClient_StartAndConnect Failed: Message
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Pending power op found, completing.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Clearing execReqPath
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: VMHSStartVmxVigorCb: vmPath=/vm/#cf2324dcf779001d/ status=error
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.040+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: Setting power state poweredOff
2014-05-07T09:42:04.056+02:00| vmplayer| I120: Internal VMDB error: VMDB failure (-1)
2014-05-07T09:42:04.056+02:00| vmplayer| I120: VMMgr::CloseVM: closing VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.056+02:00| vmplayer| I120: DlgUI: Error while powering on: Internal error.
2014-05-07T09:42:04.087+02:00| vmplayer| I120: VMMgr::OnVMDestroyed: cleaning up after destroyed VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::SetAttached: detach
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::OnSetAttachedCompleted
2014-05-07T09:42:04.118+02:00| vmplayer| I120: FILE: FileDeletionRetry: Non-retriable error encountered (C:\Users\Michael\AppData\Roaming\VMware\preferences.ini~): Unknown error 2 (0x2) (2)
2014-05-07T09:42:07.488+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:42:09.874+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
2014-05-07T09:44:13.286+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:44:13.473+02:00| vmplayer| I120: Cmd /host2/#_client/util/file/cmd/##135/op/stat/ failed: Invalid path
2014-05-07T09:44:17.061+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
Does anyone have
an idea maybe??
Vmware Version is: 6.0.2 build-1744117
Host: Windows 7 Enterprise, 64-bit 6.1.7601, Service Pack 1
WIN2012RT Iso is: 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_DE-DE-IR3_SSS_X64FREE_DE-DE_DV9.ISO DOWNLOAD: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

Ok. I could finde out the Problem.
I uninstalled VMware witht RevoUninstaller and deleted all Vmware sysfolders and all regKeys.
Important note:
The first Installtion was on the 2nd Hard disk on my PC. These Harddisk was Connected via USB3 Port. VMware was successfully installed, and via the standart installation procedure the ISO files could be installed in Vmware, but the problem persist with
WIN2012RT server.
After a new installation of VMware into the Local C: Drive. The Win2012RT.Iso could be installed. With this procedure
without Issues: http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
ISO Download: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

How is it that fonts in the Mac system can be damaged?

How is it that fonts in the Mac system can be damaged?
It does not hapen in PC systems, ever!
How do we go about replacing the damaged fonts?
I treid to delete and reinstall but no sucess.
Also, Mac systems can only have active about 250 fonts.
PC systems can have up to 1,000 fonts and run very smoothly with any hitches.
Any sloutions or recommendations?
Looks like I made a wrong choice.
I thought that Mac systems was very stable when it comes to graphic related applications, but it seems that I was WRONG.
A simple font base also Mac system cannot handle as well as a PC based system.
Sorry if I have offended other Mac users.
But, I would really like to continue using my Macbook Pro.
Cheers and Merry Christmas, everyone!!!
Kelvin LEEmy

How is it that fonts in the Mac system can be damaged?
As ds store noted. Any file on any part of the drive can be damaged at any time. This is true of any OS, not just the Mac.
It does not happen in PC systems, ever!
Why in the world would you think that's true? I used DOS/Windows for years. Fonts on PCs get damaged too, for pretty much the same reasons.
How do we go about replacing the damaged fonts?
You can replace just the fonts from your Snow Leopard installation disk. See the bottom of my article, Font Management in OS X for instructions.
I tried to delete and reinstall but no success.
Not enough info. Reinstalled from where?
Also, Mac systems can only have active about 250 fonts.
I don't know where you read or heard that, but it's 100% wrong.
PC systems can have up to 1,000 fonts and run very smoothly with any hitches.
And I've had as many as 8500 active (for testing, I would never do it day to day). Do I win?
Any solutions or recommendations?
The most likely reason, assuming you replaced the fonts with known good copies is Font Book. Put bluntly, it's one of the worst font managers available. It's database is easily corrupted. When that happens, fonts that are marked as active in its interface won't appear in some, or all apps. You'll find you can't activate or deactivate fonts. Use these steps to clean Font Book up so it works.
Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
After the Mac finishes booting back to the desktop from Safe Mode, do the following to clear the rest of the font cache files.
Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.
Looks like I made a wrong choice.
As opposed to what? Dealing with viruses each and every day?
I thought that Mac systems was very stable when it comes to graphic related applications, but it seems that I was WRONG.
Boy, you sure know how to make people want to help you.
A simple font base also Mac system cannot handle as well as a PC based system.
Also flat out wrong. Fonts are simple. You add them and use them. Turn them off when you don't want them active. Learning and understanding a new OS is usually a good idea before you start trashing it.
If problems return soon after resetting Font Book with the notes above, then you most likely installed junk fonts. Free fonts are worth what you paid for them and are the number one source of such problems on both Macs and PCs.
Secondly, get rid of Font Book. If you use and manage fonts every day, get a professional manager. Suitcase Fusion 4 and FontExplorerX Pro are your best choices.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Which 3D software will do the particle system best?

Which 3D software will do the particle system best? Because I have Lightwave 3D 8, it doesnt do what I really want. I couldnt transfer from one action of particles to another action but makes two different actions of particles instead. For example, I want an explosed particles turning into flying then again explosing. Just the transformation of action that Lightwave cant do. So, I remember I was told Combustion has one of best particle system.. So, I need your knowledge and experience to make some recommendation for me to check which software I may get to use for a better particle system to make?? Please let me know.

Hmm. Not really a Final Cut Pro question you are asking there . . . .
. . . however so as to appear somewhat helpful anyway . .
I use Trapcode Particular in After Effects and Particle Ilusion which is a dedicated piece of particle generation software.
Others here will use Motion or Combustion.
Trapcode Particular and Particle Ilusion will let you work in a 3D space.
The ultimate 3D particle system is usually regarded to be the one in Maya Unlimited.

With apple pages - how do I start and stop the correction system/ spell and grammar, etc proof reader?

How do I start and stop the corection system - das Korrektursystem/ the program in pages where one mark a text while proff reading it?

Pages version?

How One EP Portal will connect the 2 Different System(ECC Europe,China)

Similar Messages

Maybe you are looking for