How Open More Ports into Mapping section...

Hi all..!
In the Mapping section it is only possible to open/access a certain number of ports... How can I open more ports or all if I wanted to?
Thanks for help...

If you want to map more than twenty ports, you need to use the Base Station's "default host" or "DMZ" feature. It is designed to forward inbound traffic on ALL ports to the private IP address of one computer on your LAN.
See also the article How do I use port mapping?

Similar Messages

Opening more ports

Can I open some specific ports? DirectTV says I need to open ports 1701 and LT2P for my TV to be able to record previous TV programs to watch later. My TV says I have internet connection but it won't download programs and they (DirectTV) says there is a miscommunication between my TV and the router. They say that the router ports that I mentioned need to be opened. Not sure about any of this. I'd appreciate any help anyone can give.
Thanks,
Suzanne

Great! Thanks suzschr.
Do you have Cisco Connect Software installed on your main computer? You may open it. Go to Valet Settings and click Advanced Settings, click OK and you will be routed to the router page.
Once on the page, click Applications & Gaming, select Port Range Forwarding and enter the ports you need to open.
It would require you an IP address, you can check the IP address of your DirectTV under the DHCP Client Table. Go to Status, click Local Network and select DHCP Client Table.
Another box will pop-up, look for your DirectTV's IP address on that table.
If you do not have Cisco Connect Software installed, you can still access the router page by typing 192.168.1.1 in the address bar of your browser.

How to open all ports on a Windows Server 2012 VM

Hi I am wanting to open a range of endpoints ports (approx 900) for my Windows Server 2012 VM on Azure. This is the range 54363 to 55263 how can i do this I know that azure has a limit of 150 endpoints. Can I open all ports instead?
Please any help with this would be appreciated

Hi,
I don't familiar with this topic, I find a feedback similar with this issue, please see more at:
http://feedback.azure.com/forums/216843-virtual-machines/suggestions/3995978-allow-to-open-more-ports-that-the-150-ports-limit , it seems that this new feature has been fixed, please have a look at Corey Sanders's response, and see this new update at:
http://azure.microsoft.com/en-us/updates/virtual-machines-instance-level-public-ips-now-in-preview/ , hope this helps, if not, or you have any further questions, I suggest you move to Azure VM forum for a better support, azure VM forum link is:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=WAVirtualMachinesforWindows
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Using Maverick, how is it possible to open more than one calendar window?

Hi, I'm using Maverick 10.9.1
My question is: how is it possible to open more than one calendar window? i would like to have on the right my personnal calendar dates and on the left, my company calendar.
Many thanks in advance for your help!
ph

See if the section on group calendar helps.
http://www.dummies.com/how-to/content/basics-of-calendar-in-os-x-mavericks.html

How do I port forward or open a port on the Airport time capsule to hook p a security system?

I have an airport time capsule and a security system. The installer doesn't know anything about using routers etc, especially on a mac. They say I have to port forward or open a port specifically of this device. I have very few skills when doing this IT type. Is this hard to do? Can I do it myself? He wants to get an IT guy out? $55 an hour, how long would it take? Thanks in advance for anyone who can help!

The method is here.
AirPort - Port Mapping Basics using AirPort Utility v6.x
If you need to get someone in, it depends.. The TC can be recalcitrant.. due to your setup of it following the apple guides.. and it depends on the security system and how simple that is.
There are multiple issues.. for example how do you find your IP address from the web when you have dynamic IP from your ISP.
Do you intend to setup dynamic DNS? Can the camera /dvr system handle Dynamic DNS?
I recommend you read very carefully the instructions for what has been installed.. because merely opening the port is only a small part of the issues involved in remote access to the security system.

I have widows 7 and want to know how to open a port

I want to open port 40 but cannot find out how.

Hi,
Do a full virus and malware scan on your PC to ensure that a virus or malware program is not trying to trick you into opening the port.
Typically this port (40) is closed as it could be used as an exploit by a virus or malware program.
Most ports will be opened as necessay by the firewall product for the program requesting to go outbound.
In some cases, you might have to do a manual configure and additionally set the required protocol. However, this is not recommended.
Let's make sure that you don't have a virus or malware on your PC that is causing your issue.
Try the Symantec Security scan to see if you have issues.
If you do have issues then try these Symantec Rescue Tools.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How to split this string into 4 sections to a max 35 characters

Hello,
Does anyone have an idea how I can acheive this please.
I have this string
Expense_Inv_8- ExpenseInv_7- Exp001- Expense_Inv_6- Expense_Inv_5- Expense_Inv_4- Expense_Inv_3- Expense_Inv_2- Expense_inv1
and I need to display them in sections seperated by ';' as explained below
Section 1 Section 2 Section 3 Section 4
Expense_Inv_8- ExpenseInv_7- Exp001;Expense_Inv_6- Expense_Inv_5;Expense_Inv_4- Expense_Inv_3;Expense_Inv_2;
need to split this string into 4 sections seperated by ';' and each section should be of no more than 35 characters, if null should end ;;;
Section 1, 35 Character ended by;
Section 2, broken off after Expense_Inv_5 because Expense_Inv_4 will take it over 35 chracters)
Section 3, should only take Expense_Inv_4- Expense_Inv_3, because adding Expense_Inv_2 will take it over 35
characters, each record in the string is seperated by '-'
Section 4, dispays the reminder of the string
regards
Ade

Hi,
Welcome to the forum!
Whenever you ask a question, it helps if you post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) and the results you want from that data.
I think I understand the problemk well enough to attempt a solution, but if the query below isn't right, please post that information.
WITH     cntr     AS
     SELECT     LEVEL     AS n
     FROM     dual
     CONNECT BY     LEVEL     <= ( SELECT MAX (LENGTH (txt))
                         FROM    table_x
,     got_best_path     AS
     SELECT     id
     ,     txt
     ,     MAX ( SYS_CONNECT_BY_PATH ( TO_CHAR (c.n, '99')
                  ) AS best_path
     FROM     cntr     c
     JOIN     table_x     x     ON     c.n <= LENGTH (x.txt)
     START WITH     c.n     = 1
     CONNECT BY     c.n - PRIOR c.n     BETWEEN 1
                             AND      :section_length
          AND     x.id          = PRIOR     x.id
          AND     SUBSTR ( x.txt
                             , c.n
                             , 1
                             )     = '-'
     AND     LEVEL          <= :section_cnt
     GROUP BY id
     ,            txt
,     got_pos     AS
     SELECT     id
     ,     REPLACE ( txt
               ) || ';'                         AS txt
     ,     best_path
     ,     TO_NUMBER (REGEXP_SUBSTR (best_path, '[0-9]+', 1, 2))     AS pos_2
     ,     TO_NUMBER (REGEXP_SUBSTR (best_path, '[0-9]+', 1, 3))     AS pos_3
     ,     TO_NUMBER (REGEXP_SUBSTR (best_path, '[0-9]+', 1, 4))     AS pos_4
     FROM     got_best_path
SELECT id
,     SUBSTR (txt,     1    , NVL ( pos_2         , :section_length))     AS section_1
,     SUBSTR (txt, pos_2 + 1, NVL ((pos_3 - pos_2), :section_length))     AS section_2
,     SUBSTR (txt, pos_3 + 1, NVL ((pos_4 - pos_3), :section_length))     AS section_3
,     SUBSTR (txt, pos_4 + 1,                        :section_length )     AS section_4
FROM     got_pos
;As written, this requires SQL*Plus 9 (or higher). You can have multiple versions or SQL*Plus on the same client, if you really need to keep the older version.
:section_length is the maximum length of each section (35, as you stated the problem).
:section_cnt is the number of sections. In the query above, this is 4. If you change it, you not only have to change the bind variable, but you have to change the hard-coded SELECT clauses of the main query and the last sub-query (that is, got_pos).
MODEL or PL/SQL would probably be better ways to solve this problem.

How apple can avoid zombies apps? Should they open more suggestions on app store despite of the number 300???

How apple can avoid zombies apps? Shoud they open more suggesstions despite of the number 3000 as usual???

applleuser0123456 wrote:
Hi all,
Some misunderstanded the fact. Here is some points about that: http://in.news.yahoo.com/two-thirds-apps-apple-store-never-downloaded-zombies-05 4843596.html
I guess I'm not sure of the point of the article either. I would imagine this applies to almost all software ever released for any platform. The considerable majority get little use or attention, and are short lived. Only a relatively few meet some major common need amongst a large number users.
How many people install and regularly use MS Office or Adobe Reader to their home computer, relative to say something like any one of the multitude of ftp clients that exist or have existed over the years (since most peoples ftp use will be via a web interface, not a standalone client)?
Most software either gains no traction due to alternative competitive apps, or is targeted at a niche market of relatively few users.
Just the nature of the market - it's very tough to come up with a real breakthrough application that nearly everyone will want or regularly use, or that will do so for a very long time. Even big hits like many games peak quickly and then fade off into history, even though still available.

User mapped section open

Hello All.
How to overcome this problem.
"Cannot copy ...: the requested operation cannot be performed on a file with a user-mapped section open."
I usually receive the above error message when I try to copy a new copy of *.fmx, or *.plx, or mmx while a user has a session open of my application.
Some time I want to release a new version of forms after fixing some bugs, but I have to wait for all users to log out.
Is there any way around this?

In this case you have to add a new string in the registry. Edit your registry and goto the home where the application server is installed and add a new string
FORMS60_MMAP=0 or FORMS90_MMAP=0
and restart the Server. It should work.

I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
But there is a plugin for ID that makes this possible. Never tried it myself.
https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

Firefox won't let me open more than one window at a time. how do i fix the problem

Firefox won't let me open more than one window at a time. It use to allow me to open multiple windows before but for no apparent reason it stopped. I uninstalled it and re-installed but I'm having the same problem. How do I fix the problem
== This happened ==
Every time Firefox opened
== several days ago

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How can others open more than one form? [Was: Sandra]

How do you use Forms Central? I am the only account that can open more than one form. I have added all the people in contacts. When they login, they have the upgrade option for more than one form. We have an order number and end user id. Thanks for the help.

Hi,
It sounds like you have a paid account and the other users have free accounts.
You will have to share the form with the other users, please see this link for more detailed on how to share a form with others:
http://forums.adobe.com/docs/DOC-3351
All the free account users should be able to open all the forms that you have shared with them. Free users can only create one form on their own.
Hope this helps,
Thanks
Lucia

How do I add more ports to my new Airport Extreme?

How do I add more ports to my new Airport Extreme? What do I need to buy?

Thinking to leave as is for now- one 2013 extreme.
That would certainly keep things a lot simpler.
Does it seem right that using speed test I'm getting similar speeds, no matter if I'm connected via wi-fi, or Ethernet?
A very good sign assuming those speeds are reasonably close to the your plan offered by your ISP. The Extreme itself is capable of much faster speeds than your ISP can ever hope to provide.
I'm thinking that all the speed in the world is not going to change Time Warner Cable, the provider for earthlink cable
Not sure what you mean here. Time Warner provides various plans, some up to 50 Mbps. I get 60+ consistently with this plan. I had a 30 Mpbs plan before that consistently delivered about 35-36 Mbps.
The math is simple. If you download a lot of files from the Internet, a 50 Mbps connection is going to take half as long to download a file as a 25 Mbps connection, for example.
One word of caution though....if you try a higher speed plan...plan to stay, as you will never go back to slower speeds once you have sampled higher speeds. Comcast now owns Time Warner by the way. I don't know whether that will be a good thing or a bad thing.

How to open more than 1 file at a time in PSE12?

How do you set PSE12 to open more than 1 file (jpg) at a time? I've seen this question come up many times but no one seems to get the problem resolved. I've tried all the suggestions. Any assistance appreciated.
I had this program installed and working as I wanted about 3 months ago. I then uninstalled and reinstalled a few days ago. Now it won't open more than 1 file at a time.

Hi,
My theory is that Windows get confused when it is opening the program file and the following intsructions should create a unique copy. I have produced the instructions in detail because I am never sure how much people are use to - forgive me you know much of it.
Open Windows or Folder Explorer
Navigate to C:\Program Files (x86)\Adobe\Photoshop Elements 12
Look for PhotoshopElementsEditor.exe
Right click on the file and select Copy
Right click on a blank space and select Paste - you should get a prompt asking if you want to continue - you do - this should produce a copy of the file
Rename PhotoshopElementsEditor - Copy.exe to PSE 12 ED - you should get a prompt asking if you want to continue - you do
Close the Explorer
In the Windows Control Panel, select Default Programs
In Default Programs, Select Associate a file type … - it will take a while to display the list
Scroll down to the type you want to select - say .jpg and select it
Click on the Change program button
Click on the Browse button
Search for the PSE 12 ED file renamed in 6 above, select it and then click on the Open button
Click on OK and close the Default Programs
Now try your tests. I can get multiple files to open as well as retain Expert mode.
Good luck
Brian

How Open More Ports into Mapping section...

Similar Messages

Maybe you are looking for