How Order was transmitted even if the quantity was less than the minimum
Hi All,
We have an issue where an order has been transmitted for 23 cases where minimum is 25. This order came through even if this order is for that part of the region that should not be able to tranmit orders if under min..
Being a technical guy, I am not able to understand the issue itself.
Doubts :
1. How an order is supposed to be transmitted ?
2. What is this minimum below which an order should not be transmitted? Where this minimum value is defined ? Is it specific to customer or specific to area or specific to plant?
In which table or through T-Code I can check this minimum ....
Can you please guide how to explore the above....
Thanks in advance.
Regards
Sanjeet,
Check the table MVKE
MVKE~AUMNG
MVKE~LFMNG
thanks\
Mahesh
Similar Messages
-
How order got transmitted even if quantity is less than the minimum
Hi All,
We have an issue where an order has been transmitted for 23 cases where minimum is 25. This order came through even if this order is for that part of the region that should not be able to tranmit orders if under min..
Being a technical guy, I am not able to understand the issue itself.
Doubts :
1. How an order is supposed to be transmitted ?
2. What is this minimum below which an order should not be transmitted? Where this minimum value is defined ? Is it specific to customer or specific to area or specific to plant?
In which table or through T-Code I can check this minimum ....
Can you please guide how to explore the above....
Thanks in advance.
Regards,
SanjeetHi Sanjeet
You can maintain "Minimum order quantity" in the Material master data.
Go to change mode of material master (MM02), enter your material number, click enter, select the "Sale org 1" tab and continue.
Now, in the "Sales org 1" tab , scrolled down and you will find a field "Minimum order quantity" as you required, save it.
Suppose, you have entered ,minimum order quantity as 10 pcs.
If you create an order for that item and if the quantity is below 10 pieces then system will give you "warning message". This is normal standard setting.
If you want that system should give "Error message" instead of "Warning message" , then go to transaction code "OVAH".
For combination "V4" and "082", change the sytem message to "E" (normally you will find here W).
NOW, SYSTEM WILL GIVE YOU ERROR MESSAGE IF YOU ENTER , in the Sale order, order quantity which is less than the minimum order quantity as specified in the material master data. -
Disable Booking if Reservable Quantity is less than the Ordered Quantity
Hi Everyone,
How can we disable booking of sales order if the quantity reservable for an item is less than the quantity ordered in the sales order?
Best regards,
PaulYou need to Modify WorkFlow . You can do something like this.
1) Add a custom node between Book-Eligible and Book Node
2) Write your logic Inside the proc, which will get called from newly created custom node. -
ATP quantity is less than the available stock.
Hello,
A material is managed in batch.
When I create a delivery for a sales order the ATP quantity is showing less than available quantity.
MMBE:
Material: AAAA
Storage Location: XX
Batch: 11001 Unrestricted stock: 742750 KG Blocked Stock: 718000 KG
ATP quantity should be: 24,750 KG
Where as in VL01 while creating delivery it only suggests 24,500 Kg.
What could be the reason.
Sensing deficit of stock, I am creating a planned order through MF50 for another 750 KG.
Then in VL01 I get a proposal for 24750.
Why is it so?Hi S P,
Did you check the all the points from OSS knowledge base article 1837190 - Non-confirmation in sales documents or deliveries because of inconsistency ?
Regards,
R.Brahmankar -
Why is the render quality less than the source files
I am setting render quality at Best, Full 1920 x 1080. The movie quality in either a quick time or windows media player file is terrible. These same files export at good quality at school with the same settings. Why am I getting poor image quality on my PC at home?
The first image is a screen shot of the original footage taken in AE. The second image is the exported qucktime. The quick time is at half size and the AE is 50%. The source files are a qucktime output of a frame by frame animation I created in AE. I have tried rendering both interlaced and progressive. My instructor had me drop the source files onto the "Create a new composition" icon at the bottom of the project window so AE would interpret the sourcefiles correctly to be exported back to Final Cut Pro. The format options are set to no compression. I don't know how to tell what codec I am rendering to.
My instructor isn't any help since I am working on a PC. He only knows Mac. -
Question
Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. I delete emails from the Inbox and the Sent and Trash boxes to overcome this. How can I increase the storage space to stop this happening?Hi terrybohle1938,
Firefox is a web browser. It provides access to online content. Things like your email are handled by the content provider. Who is your email provider? You'll have better luck consulting their documentation.
That being said, deleting only email is a great way to free up space. Another option would be to purchase a "Premium" account if your email provider offers this service. Many times more storage space is offered as part of paid subscription.
Hopefully this helps! -
Confirmed quantity is less than open quantity in sales order
when i create a sales order the Cumm ATP quantity was less than the amount specified in the sales order, i checked my stock and i have enough stock yet my delivery quantity is less than my sales order quantity and if i maually try to increase the amount in the delivery to what i have in the sales order it gives a message only xxxxx available . what can i do?
Date MRP e Reqd Qty Confmd *** ATP
01.09.2011 Stock 457
15.08.2011 CusOrd Totals record 20 - 0 0
19.08.2011 CusOrd Totals record 3,780- 3,780 0
30.08.2011 CusOrd Totals record 975- 300 3,323-
31.08.2011 CusOrd Totals record 150- 150 3,773-
01.09.2011 SLocSt 0401 378 378-
01.09.2011 SLocSt 0402 79 79
I have put the text above for your use, so you can now help me out, i hope to hear from you soon. -
PO is getting released even if the total amount is less than the last PO am
Purchase Order is getting released even if the total amount is less than the last PO amount. The release strategy is only working for the first Purchase Order and if the PO amount is greater than the last PO amount.
Please let me know how to correct this scenario (release strategy).
Regards,
PrishuHi,
Release strategy has nothing do with the previous PO amount. May be, Co-incidently the amount in previous PO which you are referring and the characteristics value maintained in the release strategy is same.
1) Please go in release strategy by the path mentioned below
IMG u2013 Material Management u2013 Purchasing u2013 Purchase Requisition u2013 Release Procedure u2013 Procedure with Classification u2013 Set Up Procedure with Classification
2) Then go to release strategy. Here the total available release strategies would be displayed. Double click the strategy which is getting reflected in the PO you want and go the classifiction tab. There you will get the PO value. Based on this characteristic value the respective release streategy gets refelected.
I hope this clarifies.
Regards
sachin -
I created a PDF of my book in Preview and encrypted it. When opened in Adobe Reader, it is rotated to the vertical position rather than the original landscape position. How do I fix this in Preview? I don’t want to hassle my buyers with rotating. There was no option in Preview to account for this automatic and unwanted rotation.
Then you rotate it and SAVE or SAVE AS and it will remain that way.
-
Message no. RM109 The quantity at RP is less than the quantity at next RP
Hello everyone,
I am getting an error in regards to a reporting point. I tried going into MF4R to reset the reporting points and when I do I get the following message:
The quantity at RP 0220 is less than the quantity at the next RP
Message no. RM109
Diagnosis
The reporting point structure is inconsistent as at reporting point 0220, the backflush quantity is less than at the subsequent reporting point. In a consistent backflush, the quantity at a subsequent reporting point (work in process) always less than or equal to the quantity at the previous reporting point.
Procedure
Check the reporting point stocks using transaction MF26. Post any missing quantities at previous reporting points.
I have went into MF26 and "Yes" reporting point 0220 is less than the following reporting point. My question is... how do I fix this? Any help will be greatly appreciated.Good morning Raj,
Here is what MF26 is showing:
614830 0033 0001 W3300
0010 84 PC
0020 38 PC
0030 38 PC
0040 38 PC
0050 38 PC
0060 84 PC
0070 84 PC
0080 84 PC
0090 84 PC
0100 38 PC
0110 84 PC
0130 38 PC
0140 38 PC
0150 38 PC
0155 84 PC
0160 38 PC
0165 84 PC
0170 84 PC
0180 38 PC
0185 84 PC
0190 84 PC
0200 38 PC
0210 38 PC
0220 38 PC
0225 84 PC
0230 84 PC
0240 84 PC
0245 84 PC
0246 84 PC
0250 84 PC
0260 84 PC
0270 84 PC
0280 84 PC
0290 84 PC
As you can see RP 0220 shows only 38 pcs RP 0225 and up shows 84 pcs. Using MFBF I backflushed 46 pcs to RP 0220 to make it equal to the 84 pcs. But, when I went back into MF26 RP 0220 still shows 38 pcs.
Thank you for your help!
Rhonda -
iPhoto Slideshow: Sometimes the slideshow starts at the last image, rather than the first. How do I ensure the slideshow commences at the first image?
Is this a slideshow played directly from an album or Event or one created in the slideshow mode?
If it's the former that's been a problem for a many users. There hasn't been a firm fix found for it as yet.
There is a workaround. Put the photos in the order you want, select them all and use the Photos ➙ Batch Change ➙ Title to Text menu option. Put in Slide and check the box to add a sequential number to give you Slide-01, Slide-02, etc.
Now when clicking the play button at the bottom of the Album or Event window the slides will play in the order Slide-01, Slide-02, etc.
The best workaround is to use the iPhoto slideshow mode to crate the slideshow. There's been no reorts of similar problems in that mode.
OT -
Create TO for a quantity less than the delivery quantity
If we have created an inbound delivery in MB1C, 561 movement to post an initial entry of stocks, and then packed the HU in Vl32N. Now, we want to create a TO for a quantity less than the delivery quantity.
In LT03 I cant see any option to change the TO quantity. How can we actually change the TO quantity to be less than the Delivery quantity.
Thanks
-MikeMike,
I dont think that's going to be possible. The TO gets data from the del qty which is in your embedded HU since you have packed the qty in the del in the HU,
so if you are trying to create a TO with less qty means that you want a qty less that the HU in the del and this is not possible.
Alternatively :
1) You can receive it in your warehouse.
2) Move it in a re-packaging area
3) break the HU and re-create a new HU.
4) Pack the desired qty
5) Move the 2 HU's back to their desired bins.
Hope this helps and works!
thanks' -
How can I make a table cell extend beyond a page? The text disappears when the cell becomes bigger than the page. I want the table to continue to the next page.
As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.
-
Steps to reproduce:
Open a new tab
Using the search bar (for Google) within the page on the new tab, enter a search query and press enter
Quickly switch to a different tab
The search results will load on the different tab rather than the tab where the search was started fromhello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] -
How do I insert a section with another time signature than the one im inser
How do I insert a section with another time signature than the one im inser
Yeah I've been trying to figure this out as well, for example... my song might be 90 bpm and I want to program another track using midi but have it play at 180 bpm. The only way I've found to work around this is to write my 180 bpm part make a sample of this and then loop this into the 90 bpm song.
-
In subcontracting the component quantity consumed more than the BOM quantit
Dear Experts,
In subcontracting the component quantity ( 543) consumed more than the BOM quantity while doing GR, so please let me know what may be the possible reasons for the same.
Regards,
BaluBalu
may be the suncontractor needed more than the BOM quantiy.It is the case of overconsumption of components.
Maybe you are looking for
-
When I try to listen to the songs I purchased from iTunes last week, I get the error message, "could not be used because the original file could not be found. would you like to locate it?" What do I do to fix this problem or locate the song? Thanks!
-
What is the best way to write a string tokenizer is a JSP page?? I am passing a vector to the JSP page which is being outputted on to the page and now I want to edit the contents of the vector. I need to tokenize the vector into a series of strings b
-
Maverick = Printing Problems
I recently upgraded my iMac OS to Maverick. Now, whenever I print from Photoshop CS4, the paper just goes trough my Canon Pro-10 printer with no printing whatsoever. It works fine when printing in Preview or Canon's Photoshop add on. It worked great
-
Hi!!! Need help please!!!!!!!!!!!!!! When I use white title, then in Final Cut its show me that they are overlighted. But, when I use the color correction, the white color become bit gray. Is it fine like this? Because if I don't make that, then when
-
Deleted mail messages not reflected in online account
I download my email from yahoo into mail. I want to keep the messages on the server, so I don't remove them from the server. However, when I delete the messages in mail, I would like to have them deleted in my yahoo account. Currently, they are not d