How pausing execution of media player when this Vi closes

Hi,
I would like to use a subvi that executes 20 seconds of playing movie with media player and then pauses. For this I succeed writing it.
Next, I would like the vi closes and when the main vi recall the subvi, I want that the movie plays in the state it finished before.
Is it possible to do this?
Thanks in advance.

Hi nousome,
this could be done by setting in the "VI Properties"- dialog the options "Show Front Panel when called" & "Close afterwards..." in the section "window appearance". Then let the video play for 20 seconds, when the VI finishes it closes by itself. After this, all local variables (controls & indicators) which are not connected to the connector pane keep their state until you unload them from memory (close LabView). So you can store the current video position inside the VI and start the video at this point with the next VI- call.
Another good solution to save values inside a sub-VI between VI- calls is an uninitialized shift register. If you have difficulties implementing this lok at the example "Single Execution Uninitialized Shift Registers.vi". I found this in my LV 7.1 but older versions should have this example too.
Hope this helps,
Dave
Greets, Dave

Similar Messages

How can the Windows Media Player 12 be made to play WVC210 .avi files?

I just built a new computer and it won't play the motion captured videos of the WVC210. It has Windows 7 Home Premium as the operating system. My machines running XP play the WVC210 files GREAT. Is there a codec I can add to the WMP12 so that it will play the .avi files. I have 3 cameras around the property, 2 WVC210 and 1 WVC200. 1 camera has the audio turned off so switching to MP4 (no audio) made that work OK. But the camera in the office I need to have audio and would rather stick to WMP over something like VLC. VLC plays the files fine but I much prefer WMP. I'm hopeing to find out how to have Windows Media Player 12 play the .AVI files from the WVC210 cameras. Any Help??

There appears to be issues with codecs on WMP 12 and Windows 7
AND\OR your WMP is missing the necessary codecs.
Google the Net and you should find different things to try
for the WMP 12.
Troubleshoot problems in Windows Media Player
http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-in-Windows-Media-Player
It looks like additional codecs may needed to download with WMP12 and windows 7
http://www.tech-exclusive.com/2009/01/22/download-windows-7-codec-pack-for-windows-media-player-12/
Media Feature Pack for Windows 7 N and Windows 7 KN (KB968211)
http://www.microsoft.com/downloads/details.aspx?FamilyID=31017ed3-166a-4c75-b90c-a6cef9b414c4&displaylang=en
Information about the Multimedia file types that Windows Media Player supports
http://support.microsoft.com/kb/316992
Another possible solution:
K-Lite Codec Pack 5.9.0 Full, Standard and Basic
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
I hope this helps let us know how it goes!
T.

How do I install Flash Player when I get a message to close Internet Explorer??

How do I install Flash Player when I get a message to close Internet Explorer???

Hello Vicram,
Much thanks and appreciation
ZZZZZZZZZZZZZZZ
Date: Thu, 27 Jun 2013 13:04:09 -0700
From: [email protected]
To: [email protected]
Subject: How do I install Flash Player when I get a message to close Internet Explorer??
    Re: How do I install Flash Player when I get a message to close Internet Explorer??
    created by VikramGaur in Installing Flash Player - View the full discussion
Hello,
Welcome to Adobe Forums.
You can download offline installer for Flash Player from here : http://helpx.adobe.com/flash-player/kb/installation-problems-flash-pla yer-windows.html#main-pars_header
Before you run the installer, make sure Internet Explorer is closed.
If it still prompt you to close IE, then this might help : http://forums.adobe.com/message/5393818#5393818
Thanks,
Vikram
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5456791#5456791
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5456791#5456791
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5456791#5456791. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to put vlc media player in i phone 4G

how to put vlc media player in i phone 4G

VLC Media Player no longer exists for iOS; it was removed due to a dispute between the developer of the iOS version and the original project. Unless you have a copy of the iOS version of VLC Media Player already, there is no way to put it on your iPhone.
If you do have a copy, downloaded during that short time when it was available, then please post back and describe the difficulty you're having.
Regards.
By the way, just to avoid any potential confusion due to terminology, there is no "iPhone 4G". It's official name is the "iPhone 4".

How to rotate window media player clockwise or counter clockwise

When I receive video , it is 90 degree off clock wise. how to rotate window media player clockwise or counter clockwise?

Hello,
These sort of questions belong in the
Music, Photos, and Video forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to change default media player setting in Mountain Lion

I right click on the desired media player, then I click on "get info" and another pop up appears,
but there is no "open with" selection! See pic below:
I open the application folder in the Finder window, I highlight the desired media player, I go to the top and
click on File and in the drop down menu, the "open with" is grayed out. Why?
How do I change the default media player setting or better yet, where do I find what is the default player? Help Please!

CheeMiss8
you need to find the file you are trying to have open with a specific application.
for example, I'm going to use an MP4 file titled cat_adventure video.
here it is in finder
I right click (secondary click) it in finder, and then hold down the option key on my keyboard.
the Open With dialogue should change to "Always Open With" and then you choose your application from the pull out menu when you hover that.
You can make it so all MP4 or whichever file you are using (AVI, MKV, etc) to open with a specific app by right clicking the file choosing get info
The difference here is I'm not selecting the application but a file with the extension of the video format I always want to be opened with a specific application
once in the get info menu I can then select to have the video always open with a certain app.
1.click the open with accordion menu arrow if it is pointing to the left. it should be pointing down.
2.select the application you want to always be associated with that file format
3.select Change All to have that file format always be opened with that Application.
Where this isn't working for you is because you are doing this to the Application itself. you don't do it like that. You need to find the type of file you are trying to open with itunes and then go through these steps.
selecting the application (itunes) instead of the file (mp4, avi, mkv, flv) will not allow you to set what the file format lets you use to play your video.
having said that, itunes is very limited in what it can and can't play. Mainly .mov and mp4's (apples proprietary extensions)

How to rip with Media Source when not Administrato

It looks like MediaSource cannot rip audio CDs when user is not logged as Administrator on Windows XP SP2.
How can I make it work for regular users (not Administrators) ?
Thanks

There are also problems getting Creative software to recognise that a player is attached when not logged on as an Admin - see this thread. Windows Explorer see the player and so does Windows Media Player, but MediaSource and Creative Media Explorer don't.
C'mon Creative, your software doesn't seem to be fully compatible with the user groups that XP Home uses! What are you going to do about it's
PB

How to make Adobe Media Player work online?

Hello,
I have Adobe Media Player. When I launched before, I was able to see the content. Nowadays, it showing just blank screen saying "You must be online to view this content" Although JavaScripts already enabled on my safari web browser and my personal firewall is On.
p.s firewall was always On When I was able to see adobe media player content!
I would like to know if anyone tell me how to make it online?
Thank you.

The flash add-on is not available for Safari on iOS. Never has been and in fact Adobe has ceased support for flash for mobile devices in general. Your options, depending on the specific sites:
See if the site or sites in question have their own apps availabel in teh app store
Look into some browsers such as Puffin adn iSwifter (there are others, I beleive). These browsers use a third server site to translate the flsh content into a form that the iPAd can use and restreams them to you. They may not work with all content.
Use a computer capable of running flash.
Seek a source of the conent that is designed for non flash use.

How to Reinstall Creative Media Player Software

October 2nd 2006
If your update for Creative Media Source, Creative Media Player, and any associated programming has corrupted your system and you need to reinstall the older version or reinstall any of it period this information is critical to avoid serious frustration. It took me four days to figure this out fully and it was HARD to figure out with NO thanks to Creative Technical support. If anything Creative OWES me for this information since they are too stupid to answer my questions with anything but canned answers. It was posts on the Creative forum and several searches in Yahoo and Google that helped lead me to the conclusion of this issue and I feel that you as a Creative customer are not going to like this at all but hey, I?m just the messenger so please don?t kill me! Word of warning! Formatting your hard dri've and reinstalling all your software is far easier than what I am about to instruct you but what I figured out does work and seems to be the ONLY way of really fixing this bug. This applies to the Audigy Z 2S Platinum and should apply to ALL Creative Software in this line of Creative Products.
What caused this in the first place:
I was happily running the supplied creative Media Player, Media Source Go! software with THX, Dolby, and the other features that came with my Audigy Z 2S Platinum. As a conscientious computer user I like to keep things up to date and like to keep my software updated so I went to the Creative site and performed the automatic updates. BIG, BIG mistake! I lost the Equalizer, THX, the Mixer, and everything BUT the most basic of applications to this sound card. The point of me buying it in the first place was the features. The updates stripped me of them. When I tried to reinstall the original software the problems began. When using the supplied installation disk and attempting to uninstall the software was problem one. Creative never had the forethought of supplying an accurate uninstallation feature so when you use the ?Add/ Remove Program? feature you do not get the junk that Creative hides in your file system much like trying to extract AOL Files (which gave me the inspiration for getting rid of the corrupted installation of Creative Software). Like AOL software Creative is extremely invasi've and hides in a number of places you would not even think to look in.
The Issues you will be facing and the associated Error messages:
Upon reinstallation of the old software after my first of many attempts at removing the old installation I began to get the following error messages upon startup of the Media Source software, ?Exception-Created Object:Exceptions:FactoryNotFound Message:?Invalid Factory in Created Object: AudioChannelMappingMSG? and ?PFX file missing or corrupted, application will now terminate?, and the last of your nightmare messages ?Device not found by application and application will now terminate?. If you get any of these messages you are screwed and face a serious uninstallation procedure to correct this. Thanks to this you should be able to fix it all and get your reinstallation to take properly.
Something to keep in mind and I only found out about this the day before I wrote this, Apple Quicktime 7 has a serious conflict issue with DemoShield and the removal process is the same for the Creative Software since uninstallation will not get Quicktime out either. Before you reinstall remove Quicktime 7 or you are going NOWHERE! Quicktime 6 does not appear to interfere with the installation. You will get the error message ?DemoShield has encountered a problem and needs to shut down? followed by the computer wanting to send an error report. This is a sure fire sign that Quicktime is interfering with the installation along with the file DEMO32.exe which will need to be deleted.
Another thing I need to mention is that you WILL need the following software or something similar to eliminate all traces of Creative software, Error Expert, RegEditXP, Directory Cleaner, and Find Dead Links. This software will get the impossible and hidden stuff you will not find or be able to get rid of otherwise.
Preparation for this task:
Kick on some music, smoke a FAT joint, drink a beer, or do both because this process is involved and frustrating! If you don?t drink or smoke or both than I hope God is with you because you will be cursing and swearing when something does not go right. Remember, I was at this for four days FULL TIME with minimal information to go on. Patience is a MUST or be ready to pay an expert a LOT of money to deal with this.
Now it begins:
NOTE: It should not be necessary to uninstall the Card itself. The software and not the PCI card is the issue and the drivers are not what cause the hanging reinstallation. I did at one time in the process of figuring this crap out pull the card but when I managed to fix the problem I had left the card in. Again it is NOT necessary to pull the Sound Blaster card from it'ss slot to effect the fix for the software.
NOTE: Should at any time in this extraction process you get the message ?Application cannot be removed? or ?Another application is using file and it cannot be removed? hit CONTROL/ALT/DELETE to open the Task Manager. Click APPLICATIONS and if Creative software is running click END TASK. You can then continue the extraction process.
: TRY to save all of your important media files in another directory (preferably in another dri've or partition. Another dri've is preferred) before you begin this so you don?t loose your music and video files to an accident, misunderstanding, or software association. Making a special holding folder with an easily recognizable name not having Creative in its name will help keep you from accidentally deleting these files in the event the search turns them up.
2: Go to the ?Add Remove Programs? in the control panel and remove all instances of Creative you can find. When that is done go to Run\msconfig and select ?Selecti've Starup? and UNCHECK ?Load Startup Items?.
3: Restart the computer. Now the fun begins. Put on your hunting hat, you are on digital safari!
4: When the computer starts up you will be notified by msconfig that changes have been made to the way the computer starts. Hit the red X and close the message and do the same for msconfig. You will see the prompt ?restart computer? or ?close without restarting?, select ?close without restarting?.
5: Open Windows Explorer, Start\Programs\Accessories\ Windows Explorer. The search feature here is a great help but for the moment get the obvious crap first.
6: In Windows Explorer click ?View? and select ?Show hidden files? in the selection menu window. This will allow you to get the stuff that regular uninstallation can't get at nor will a regular search reveal. THIS IS A VERY IMPORTANT STEP DO NOT TRY TO WORK AROUND IT OTHERWISE YOU WILL FAIL EXTRACTING ALL THE JUNK!!!!!
7: Look for these three directories first:
C:\Documentsandsettings\USERNAME\StartMenu\Program s\Creative
C:\Documentsandsettings\Aministrator\StartMenu\Pro grams\Creative
C:\Documentsandsettings\USRNAME\Applications\Creat ive
Delete them!
8: Now go to the C:\Programs\Windows directory. This gets touchy. WORD OF WARNING TO NOVICE AND INTERMEDIATE COMPUTER USERS ALIKE (Experts should need no warning about this) BE VERY CAREFUL ABOUT WHAT YOU DELETE HERE! THERE ARE FILES HERE CRITICAL TO THE OPERATION OF ALL OTHER APLICATIONS ESPECIALLY WINDOWS AND DELETING THE WRONG ONE WILL RESULT IN A COMPUTER THAT WILL NOT START! You can confirm who made the file by pointing at the file in question with your cursor and it should display the maker of the file.
You will be hunting any and all programs with the following beginnings, CT, SB, ct. The files beginning with ?ct? can either be Creative or Microsoft, CONFIRM EACH BEFORE YOU DELETE THEM.
The Windows files you will be looking in are:
C:\Programs\Windows\ime
C:\Programs\Windows\inf
C:\Programs\Windows\PIF
C:\Programs\Windows\prefetch
C:\Programs\Windows\Registration
C:\Programs\Windows\System
C:\Programs\Windows\System32
Lower down in the Explorer window you will find the following files that also need to be deleted:
C:\Programs\Windows\CTCCW.DLL
C:\Programs\Windows\CTDCRES.DLL
C:\Programs\Windows\CTDV0K.CDF
C:\Programs\Windows\CTDV0K2.CDF
C:\Programs\Windows\CTDVAUDY.CDF
C:\Programs\Windows\CTHELPER.EXE
C:\Programs\Windows\CTRegrun.exe
C:\Programs\Windows\CTRES.DLL
That gets the obvious and less obvious stuff out but the hunt is not over by a long shot.
9: This is where it begins to get complicated. In Windows Explorer you will be using the Search button.
Click Search and look for these files:
HKLM\Software\Creative Tech\Software Installed !!DELETE THIS FILE!!
Demo32.exe !!DELETE THIS FILE!!
Creative
SoundBlaster
{5CDDF96A-BC34-4D72-9ABA-EFFF0C39977} !!DELETE THIS FILE!!
AC3 !!Delete any and all files found associated with Creative. With the AC3 files MAKE SURE they are Creative file before deleting them. There are AC3 files unassociated with Creative and they will appear in your search. ATI uses AC3 decoders as well and you DON?T want to screw up an application that is not the problem.!!
THIS COMPLETES AS MUCH OF THE MANUAL EXTRACTION YOU CAN AS A USER GET TO WITHOUT THE ASSISTANCE OF SOFTWARE.
0: Run Directory Cleaner and set it for Creative Audio and click CLEAN followed by setting it for Creative Audio Light and again Click CLEAN. Shut down Dri've Cleaner when you are done with this step.
: Run RegEditXP and fix all issues it finds and close it when it is done.
2: Open Error Expert and set it to Scan for Registry Errors. This gets the stuff RegEditXP misses. When it has found the problems it can select FIX.
3: While still in Error Expert select ADVANCED SYSTEM TOOLS and select STARTUP LIST MANAGER. Remove Creative from the list in any form you find it. Close Error Expert when done.
THIS COMPLETES THE REMOVEAL PROCESS FOR CLEARING YOUR COMPUTER OF CREATIVE SOFTWARE.
IF YOU HAVE QUICKTIME 7 IT HAS TO BE REMOVED DUE TO A COMFLICT WITH CREATIVE INSTALLATION SOFTWARE!
If you do not have Quicktime 7 then open msconfig, reset your computer to ?Normal Startup?, click ?Apply?, then close msconfig and restart. You can now reinstall your original software.
4: Removing Quicktime 7:
This sucks as well. Uninstalling Quicktime 7 from the ?Add/remove Programs? will not work. First make sure it is OFF. If it is acti've it will not be removable. Check with the task manager and in your system tray at the bottom right hand corner of your computer monitor. If you see the blue ?Q?, close it before beginning the extraction process or it will get very complicated.
Windows Explorer Search found all the files I needed to remove but like Creative reference all the same folders in C:\Programs\Windows as you did for removing the Creative Software and remove all references of Quicktime you find;
C:\Programs\Windows\ime
C:\Programs\Windows\inf
C:\Programs\Windows\PIF
C:\Programs\Windows\prefetch
C:\Programs\Windows\Registration
C:\Programs\Windows\System
C:\Programs\Windows\System32
Windows Explorer will lead you to other programs it hides in and the one file I could not remove under any and all circumstances was the one in C:\Programs\Adobe. That one reference will not interfere with anything so you can leave that one. Once you have removed Quicktime 7 go to msconfig and select ?Normal Startup? and restart your computer.
After your computer boots up fully slap the CD ROM in the dri've and it should begin to start up as if it was never installed in the first place. You will get the prompt to, ?Modify, Repair, or Uninstall? software. Uninstall is a joke since it does not work and it is unnecessary. There should be nothing to repair after all of this so I chose Modify. I now have the original software that worked right when I first got the Audigy Z 2S sound Card and it works fine. As a footnote to all of this I did get one error message when I restarted after the installation. It said ?cdrw32.dll missing? but it had no apparent effect on my computer. A subsequent reboot and the message never reappeared. I am not looking this any deeper than I have to since the message never reappeared and I suspect it had something to do with the reinstallation process of Creative Media Source and the media player.
The End!

Audio Console is included in the latest drivers, the easiest way to reinstall it is to reinstall the drivers but if you want to reinstall only the app, uncompress the drivers package with WinRAR and run the setup program from the AudCon Folder. If your X-Fi is OEM you may need to mod CL's drivers, or get a package from Dell that includes AudioConsole.

Screensaver ignores settings in Windows Media Player when watching a movie...

Hello,
Does anyone know how to resolve the problem with screensaver kicking in while watching a movie using Windows Media Player (WMP) even though I have unchecked the option to "Allow screen saver during playback" option in WMP?
I have found that if I start Windows Media Center (WMC) first and watch TV for example or even listen to Music in WMC and then later quit out and then load WMP to watch an avi file, after the specified time the screen saver starts up and the movie is no longer visible until i move the mouse to stop the screensaver. I know if I reboot WMP will work fine and no Screen saver will startup, that is not until i start WMC again and then go back into WMP...
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer
This question was solved.
View Solution.

ah yes, guess what, in Windows 7 this problem is fixed!!!
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

How to export the media player for imported .flv video to stage ?

Hi,
I wonder if I can export the media player ( to the .SWF) without making my own using action script and buttons ....
When I hit Ctrl/Enter I get a very good player along with video but when I export the player is gone (only video is there).
There must be a setting for this I hope ?
I'm using flash / xml too for thsi web site.
thanks!

resize both the Stage and the FLV component to the
appropriate size.

How to use win media player in streaming

Hi all
I want to do an application that is streaming live video on network and playable from windows media player on client side. Is this possible with JMF? Or how can I do this with another way?

wpafbuser1 wrote:
Is this possible with JMF? Yes.but how ?

My Video shakes from side to side in Windows Media Player is this caused by the stabilization effect

I have recently saved some of my video's in the format "MPEG HD 720P 30" and when I play them with windows media player is does not go full screen it has the two black bars on the sides and at certain points in the video the sides will shake right to left. I did some reading and it seems to be the video stabilizer going to effect however on the yellow line drop down menu on each clip in my timeline the setting is on Opacity and not stabilization. Is there any reason it would still be doing this?

I am using PE 10 and the Camcorder is a Sony handycam dv, model dcr-hc36. I did use PE to import the video.
the project settings:
General-
Editing mode: DV NTSC
time base: 29.97 Frames/second
Video settings-
frame size: 720x480
pixel aspect ratio: d1/dv ntsc (0.9091)
fields: lower field first
display format: 30fps drop-frame timecode
title safe area: 20/20
action safe area: 10/10
video rendering-
file format: microsoft avi dv/ntsc
compressor: dv ntsc
optimize stills: active
output settings:
-MPEG 2
-HD 720p 30
output Summary:
ntsc, 1280x720, 29.97 fps, quality 4.0, de-interlaced mpeg, 384 kbps, 48khz, 16 bit, stereo, VBR,
1 pass, min 4.00, target 15.00, max 18.50 mbps
Source: clip, sequence 01:
720x480 (0.9091), 29.97 fps, lower, 01;08;15;17

Noo audio in Windows media Player when playing video exported in Mpeg format

Hi there, I really need help
I have edited a video and removed the audio.
I have added a song in the soundtrack part of the timeline.
When I 'share' as an 'mpeg' it renders etc perfectly.
When I play it on my comp it plays perfectly - In premiere and WMP
But If I put the file onto a usb or something similar and try to play it on another computer there is no audio.
I have premiere elements 7
I have windows vista Premium.
The computer I am trying to play it on has XP home edition 2002 and Windows media player 10.
The video is for a friend to put on their website, and chances are the audio wont appear on their computer either? I dont have internet on my comp so I havent tried uploading to youtube, so I don't know about that either, I would like youtube to recognise my audio also.
SO What I want is to be able to make a video, with audio that pretty much anyone can watch on any computer.
Please help.
Joshua

It appears that, when you output your MPEG, you chose an audio codec that your friend's computer doesn't support. (It's Dolby Digital by default. So entering the Advanced settings and changing the audio codec to MPEG or PCM might help.)
It's also possible your friend's operating system is way out of date, sine he's still running Media Player 10. He should go to Windows Update, select the Custom option and get all of the necessary updates.
He may have to do this several times, with computer restarts in between, if he's way behind with his updates, since some updates depend on other updates being installed. In the end, his XP should be at SP3.

Advice on how to make Windows Media Player play DVD's not the Tosh player

I do not want to use the pre-installed Toshiba Media Player to play DVD's, I want to use the installed Windows Media Player. I cannot change the default DVD player to WMP in Control Panel as the only options are either Toshiba's or Nero's player.
WMP can play CD's, MP3's etc but cannot even read any DVD in the drive. Anyone got any advice on how to do change this?
It;s a Toshiba Satellite Pro C850 with Windows 8 installed

The free KLite Codec pack which equips the OS including Media Player for DVD decoding, thus all your currently and even most future installed players. http://codecguide.com/
It comes in varying sizes but even the smallest version enables WMP for DVD's
After installing KLite, you right click the DVD drive within Windows and select the "Open With" or "Play Disc" menu option and select Windows Media Player.
You can also just use the Windows Run Box / Search box and enter
dvdplay
which activates windows Media Player DVD menus.
Microsoft hasn't always included DVD playback in Windows and then started offered it as a fee based upgrade for XP and Vista, before finally including DVD playback in Windows 7 in what some Microsoft insiders said was an apology for Vista before removing it again in Windows 8.

How pausing execution of media player when this Vi closes

Similar Messages

Maybe you are looking for