How Portal Metadata moves into Content Server

Hi Experts,
Does anybody have an idea on how portal Metadata in KM can be moved to Content server ?
What configuration steps to be done both from KM and Content server?
And once metadata is moved to content server how the documents can be accessed in KM from this migrated metadata(Documents,content) In content server?
Could somebody help on this.....
Regards
RS

Hi, Supraja Koganti
Can you provide me step by step procedure for transferring data into content server. Basically this scenarios which you have provided me its not gives me clear picture. So please do the needful as earliest as possible.
Regards
RS

Similar Messages

  • Moving metadata into content server

    Hi Everybody,
         Does anybody have an idea on how the Metadata in KM can be moved to Content server ?
        What configuration steps to be done both from KM and Content server?
         And once metadata is moved to content server how the documents can be accessed in KM from this migrated metadata(Documents,content) In content server?
    Could somebody help on this.....
    Thanks & Regards
    Sireesha.

    Dear Vasudeva,
    Please refer to SAPNote "900571".
    There is no specific way to move metadata into content server all CM Modes DBFS, FSDB metadata is always stored into Portal DB and I don't have much Idea for DB Mode....
    If you want to store KM files into content server than its possible using DBFS & FSDB Mode but not possible to migrate metadata into content server
    Reg, Tushar Dave

  • Store document into Content Server

    Dear All;
    l have the following requirement for Content Server;
    - Generate the PR/PO form via print program.                         
    -Approver's signature will be display accordingly by the approval level.               EG:  1st level approver 'A' have been approved. Signature of approver 'A' will be display on the generated PR/PO form.                                        - Convert the generated form into PDF format.                         -To attach the supporting document via Generic Object Services (GOS).               -To store the PDF form & attached documents into Archived Link content server with URL address returned.     
    -An notification mail will send to respective approver based on release strategy configuration.     
    Basically it is Workflow integrate with Content Server.  There are few thing for me to do here:
    1. Store the PO/PR document into Content Server
    2. Run the workflow and view the attachement and add new attachement to Content Server from the Workflow process.
    3. Return the URL address to the user for the document that saved into Content Server
    l'm trying to do the first requirement now.
    The user will create the PR in tcode ME52N and PO in tcode ME22N, they can create the attachement and view the attachement, and the attachement are stored in the ECC6 database.
    l have installed the Content Server 6.40 with Filesystem (not the MaxDB) cause user do not want to buy the MaxDB license.
    The Content server 6.4 installation is completed, l can configure the CSDMIN in ECC6,
    In OAC0, l have created the Content Repository=ZA,
    Document Area = ARCHIVELINK
    Storage type = 04 HTTP Content server
    Version=0046
    Http Server = 10.120.0.10
    Port Number = 1090
    HTTP Script= ContentServer/ContentServer.dll
    Transfer drctry =
    10.100.0.10\cm\exdir   /# \cm\exdir is a directory in Content Server. #/
    the physical directory created in the Content Server as
    10.120.0.10\cm\za
    In OAC2, l have created a new Document type=ZCS, the document class=PDF
    In OAC3, l have created the following:
    Object Type= BUS2012, Document Type= ZCS, Link=X, Cont.Rep.ID=ZA, Link=TOA01, Rentention=99
    Object Type= BUS2105, Document Type= ZCS, Link=X, Cont.Rep.ID=ZA, Link=TOA01, Rentention=99
    (Honestly, l'm not quite sure the BUS2012 will work, it created by functional team, which l'm sure it actually represent the business object for PO and PR)
    With these, l think the linkage between business object and logical archive is established, but when l saved the attachement in ME22N and ME52N, the document still save into ECC6 Database, not the Content Server, because in the /cm/za directory in the Content server still empty.
    Anyone please advise any documentation/steps do store the document in Content Server from PO/PR and with returned URL to the users.
    Please help..
    Many thanks
    Jordan

    Dear all;
    Thanks for the information, l manage to store document actually.
    l used the OAAD to test to stored, once it is working, then l can use the option 'Store business document" ME23N and ME52N transaction code.
    One question here l would like to check:
    The WorkFlow team said that the Generic Object Service (GOS) - "Create Attachement" option in ME23N can actually store the document to Content Server instead of store into R3 Database.  He claimed some Basis have done it before, can anyone clarify if it is true?
    In OAC0, l have ZB Content Repository, set the "Storage Type = 04 HTTP Content Server" in order to save the document to Content Server.  The Document Area=Archive Link.
    With these setting l can only use the "Store Business Document" option to store the document to Content Server, not the "Create Attachement".
    l try to change the Document Area with different option like DMS, BDS etc but l can't get the Content Rep ID for ZB in OAC3 to link the Object Type?
    Anyone can help?
    Many thanks.
    Jordan Tan

  • How to sync movies into my itouch

    hello just wanna know how to sync movies into my itocu i download free movies from itune store and wanna sync it to my itouch how?
    will i be able to watch that movie to my itouch?
    and what is audiobook?sorry i really dont have any idea?please bare with me.
    thanks

    connect your iTouch via USB to your computer, wait until iTunes recognizes your device. Then click the "movies" tab and just click the movies you want to watch in your iTouch. Its very simple and not that complicated, once you get the hang of it.

  • How to migrate from SAP content server to OPENTEXT?

    We have been using SAP content server as our storage for archived data for years.
    Now we plan to start using OPENTEXT to admin our archived data.
    How can we use OPENTEXT together with existing SAP content server?
    My idea is to treat content server as any other media as as DVD, WORM, etc.
    However, I do not see that OPENTEXT can be configured to admin content server .
    If so, how to transfer whatever on the content server to IXOS?
    We are at Opentext 9.5.x
    Please share your experience. Thanks!

    hi,
    Please refere SNote 1043676.
    Also, need to understand the following,
    How to move an entire content repository from one content server to another
    Sometimes you may need to move a content repository - but not necessarily all the content repositories from one content server to another. This can be done without much drama. Here is a means that I've used in the past:
    Use report RSCMSEX to export the repository from the source content server.
    Create a repository of the same name on the target content server.
    Use Report RSCMSIM to import the repository into the target content server.
    Delete the repository from the source content server (if desired!).
    The SAP progrm sapkprotp controls the import and export. The ABAP reports allow you to specify the RFC destinations where sapkrpotp runs.
    For lager repositories
    The programs  listed above cannot deal with the whole content repository at the same time. For a slower migration, try using the program RSIRPIRL. This approach allows you to do the migation on a live system.
    Create the new content repository on your new content server.
    Create the new content category.
    If using distribution, distribute the new documents to the new category. otherwise change redirected category for DMS_C1_ST
    Relocate using the program.
    benaakraja

  • How do I move imove content from one user to another on the same computer?

    We bought our Macbook pro about six months ago. We made the mistake of creating two users for it (my husband and myslef) but bow we only log in under my user name. The problem is we originally imported all of our video camera content to his "log in" and now it is in his imovie folder, and not mine. I want to make a movie on my log in with the fottage that we imported to his. So, how do I get video content from one users login on the SAME computer to the other log in users? I cannot seem to move it for the life of me. I did not expect this to be so difficult.

    Hi,
    You need to log into his account and look, under the Movies folder, for iMovie Events. Inside, you'll find folders with the events names and still further will be the movie itself. Copy each to an external media or use the Shared folder so both accounts can reference them.
    Another option would be to attach an external HD and via iMovie (Events Library pane) move them to the new disk. You would preserve the thumbnails and analysis already performed on the videos.
    Good luck!

  • How to transfer movies into ipad

    I just bought new ipad4...can anyone advice me as how to transfer movies stored from a usb into ipad so that I can watch the movies on the go....TKS

    You can import into itunes and then sync to computer.
    OS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    ITunes: Syncing media content to your iOS devices
    http://support.apple.com/kb/ht1351
    Or this may work,
    Secrets of the camera connection kit:
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/

  • HR Benefit-Claim Attachments from portal & linkage to DMS content server

    Hello DMS Experts,
    Our client is using standard HR functionality for telephone bill claim and attaching scanned bill copy through enterprise portal during creation of claim.
    Due to higher frequency of file upload there is issue that PCL4 cluster size increased upto 600 GB within short time & total available size in 800 GB.
    In the above scenario, client is expecting solution from DMS side to resolve this issue. Clients main concern is to reduce attachment load from ECC server. Could you help me how to arrest this problem through DMS functionality?
    1. I tried to find the solution through Archive linking as there is no standard DMS object link for HR.
    I got following Object type with link TOAHR. ( PREL, PAPL, PBS_NOTIF, CERTIFPAYD, EMPLOYTXDE, GLOBASSIGN, GLOBASSIGN ), but I failed to get object type for Employee No. & Claim No. to link the document through OAAD transaction.
    Do you know the Archive linking object type to link the document to employee no. & claim no. ?
    2. Since default Storage type setting for  HR repository "HR_KW_CONT" is SAP System Data base,  If I create standard HR repository "HR_KW_CONT" (assuming PCL4 cluster attachments stored in this repository) on DMS content server through OACT transaction, can i divert the attachment from SAP data base  to content server?
    3. If you have any other solution to resolve this issue, please guide me.
    I look forward to your response.
    Thank you very much in advance.
    Thanks&Regards,
    Sudhir Rahase

    Hi
    Here can you find more information about how to add more objects to link to
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/b2/c043a66fab11d1949500a0c92f024a/content.htm
    BR/Håkan
    Edited by: Hakan Anderberg on Aug 2, 2011 3:12 PM

  • How PLM Document save on content server

    Hi All,
    Please tell me the concept about given below scenario:
    Normally PLM documents are either saved in the Content Server or in the database.
    What if we have neither configured a database nor a content server. Where are they being stored then.
    what exactly Document serever , how the PLM document save on Content Server or in data base server.
    Thanks
    Narendra Vikram Vishwakarma

    Hi Vishwa,
             It depends on the storage area that you have maintained in the sap system for the documents. The customisation in the sap system is visible at IMG-->Cross Application Components -->Document Management --> General Data --> Settings for storage system. The storage area that you configure here will be linked to the DIR creation process.
    The SAP DMS is a file directory in the SAP server and a content server is a seperate Sap certified server usually maintained for handling files. However these topics are much more broader and you can have an overview by checking the following link www.verbellacmg.com/ulm211_v2.ppt
    Sojan

  • How to register VSPackage into SQL Server Management Studio?

    Hi All,
    I am a newer to VSPackage, I want to create a VSPackage for SQL Server Management Studio(SSMS), now I can create a VSPackage project and debug it in Visual Studio but don't know how to debug it in SQL Server Management Studio and how to deploy VSPackage to
    SSMS by MSI? Thanks

    By the way I find a extension.vsixmanifest file and some .pkgdef files under
    C:\Program Files\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\Extensions\  folder, and they are very similar with VSPackage files. Do know this is useful or not.
    Hi Vic Zhang,
    After some research, There are some notes. SQL Server Management Studio is built upon the Visual Studio Isolated Shell, which inherently supports extensibility (add-ins/plug-ins). It is possible to tap into the Visual Studio extensibility services to surface
    custom capabilities within SQL Server Management Studio; however, we do not discourage this, keep in mind that such extensibility is not supported, so there may be issues with backward/forward compatibility. Microsoft does not publish documentation for extending
    SQL Server Management Studio.
    If you want to debug VSPackeage about SSMS, I recommend you debug in Visual Studio and not in SSMS, open the project and attach to the process of SSMS.exe, then debug it.
    About the issue of finding the “RootKey”, a .pkgdef file is way to encapsulate application configuration information in an easily editable, distributable, and deployable form. And it registers the Extension Manager (which is written as a VS Package). If
    you install SQL Server 2012, the .pkgdef of SSMS is located in the following path, you can check the “RootKey” in this .pkgdef file.
    C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio
    There is detail about a PkgDef, you can review the following article.
    http://blogs.msdn.com/b/visualstudio/archive/2009/12/18/what-s-a-pkgdef-and-why.aspx
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Archival into content server - Which is a right forum??

    All,
    We are planning to use forms output to be archived into SAP Content Server running on MaxDB. Does anybody have any experience to share or point me to the right forum
    > Can it perform well with 6-10 TB of potential data in the next 4-5 years
    > Can documents be attached to the content (archive an invoice output and then scan a document and attach to the same invoice)
    Thanks!!!
    M

    All,
    We are planning to use forms output to be archived into SAP Content Server running on MaxDB. Does anybody have any experience to share or point me to the right forum
    > Can it perform well with 6-10 TB of potential data in the next 4-5 years
    > Can documents be attached to the content (archive an invoice output and then scan a document and attach to the same invoice)
    Thanks!!!
    M

  • How to import movies into itunes

    Hi All,
    Here i am using Ipod touch, nw i am trying to add the movies into itunes but nothing is happening when i drag the movie into itubes and even added also.
    Can anyone help me on this.

    Looking on the web I found that the Graboid video content needs converting. Itunes will accept mp4 or m4v.
    There are many converting apps out there. Handbrake is free and has presets for Apple TV and iphone etc
    Remember it is illegal to convert videos you do not have copyright to.

  • How to download movies into iPad2?

    Just got an iPad last weekend.  Very new to it.
    May I know how I download movies to watch on iPad2? Some movies are in VCD form & some are downloaded from the net.

    Please get the iPad iOS 4 user guide. You just load them into iTunes and sync them to the iPad. This is all explained in the user guide.

  • HOW TO INSERT DATA INTO SQL SERVER FROM MS ACCESS TABLE??

    NEED TO INSERT DATA INTO SQL SERVER FROM MS ACCESS TABLE.

    this is another method
    http://www.mssqltips.com/sqlservertip/2484/import-data-from-microsoft-access-to-sql-server/
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • How to log out in content server

    Hi,
    Whats is the process to log out in content server?
    Thanks,
    Abhijit

    Hi Abhijit ,
    Install the ExtranetLook component and enable it on the content server . Before restarting the content server add the following variable in config.cfg :
    IsWebServerPagesOnly=false
    Save the file and then restart the content server and WEBSERVER to get the component in effect on the content server.
    After that you will see the logout button appearing.
    You will get this component in the coreupdate patchset if you have downloaded one or else download it from http://updates.oracle.com/download/6907073.html
    Thanks
    Srinath
    Edited by: srinathmenon on Mar 24, 2010 11:54 AM

Maybe you are looking for