How?print report on A3 paper to epson printer

HI,
Now I am using Report Builder 6.0.5.35.0. to write report to print to printer epson LQ2080 for A3 paper size 16.5 x 8.3 inch with fond size 15. But it keep printing in fond size 10 with maximum 80 character per line. The remaining sentence will come down as 2nd line.
I do the following but it does not work.
1. In Data Model-System Parameter- Mode -Property Pallet-Initial Velue='Character".
2. In Layout Model- Header Section-Property Pallet. Under section head,the Width=16,height=8.Under Character Mode,the report width=210,height=66.
3. In layout Model-Main section % trailer section - the setting is same as No.2
4. In Data Model- system parameter-Desformat.
I put in initial value=wide255. Where this printer control file contains:
printer "wide255"
height 66
width 210
before report esc "g"
after page control(L)
return control(M)
linefeed control(J)
5. esc"g" is epson print control code for fond size 15.
Can someone share with me what goes wrong?
null

A few ideas \ suggestions:
1) Make sure you are using FP 3.3 runtime:
https://smpdl.sap-ag.de/~sapidp/012002523100016807202010E/cr2008fp33_redist.zip
2) Try a simple win app - use saved data report (crystalreportviewer1.reportsource = <path to saved data report>). Does this print correctly?
3) What print mode are you using; PDF or ActiveX?
4) Try export to RPT and PDF from your web app. Does it export correctly?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Similar Messages

  • Can i print from my ipad2 to an epson printer connected to time machine.?

    can i print from my ipad2 to an epson printer which is connected to my time machine.?

    Does that printer support wireless printing?  If so, then try it that way using the "Epson iPrint" app.  From my experience, don't expect to be able to print every type of thing you'd want to.

  • Crystal Report XI Print report on different paper size (A4/Letter)

    Hi,
    I have designed report in Crystal XI using paper sieze Letter. Multipler sites are using this application. User in USA are using Letter size paper and User in Euorpe are using A4 size paper. All reports work fine for USA users.
    When Eurpoe users print the report on A4 size paper which set in Letter size, the report is truncated from Header or footer. They are printing report from Application and application is set on Citix server.
    If Anybody have any idea how to setup Crystal report so it can print on any paper size?
    Thanks
    Bhagvat

    Hi Don,
    Please find the below description.
    Background: Crystal Report XI is utilized to develop and view reports with data source from Oracle based LIMS application (Vendor: LabWare). The reports are printed using network printer on US Letter paper for users located in North America and on A4 paper for users located in Europe. The report format is US Letter and designed to print on both paper formats i.e. Letter and A4.
    Issue: When reports are printed by users in Europe using A4 format paper the printer defaults to US Letter paper (in printer preferences) resulting to data cut off from top and bottom on the printout.
    1)      When report layout is select to A4 during developing reports using CR, the printing preferences changes to A4 when printed and vice versa for Letter format. How can we avoid CR to enforce from changing printing preferences?
    2)     According to Citrix engineers in the company, the printer drivers installed on Citrix servers have nothing to do with printing preferences and CR defaults to paper size based on report design. What do we tell them about doing different to resolve this issue?
    3)    Even though a printer preference of default printer on local desktop is changed to A4, the report gets printed to Letter format result in data cutoff.  We have tried this option with several HP printers from few different company locations.
    Thanks
    Bhagvat

  • Print report with continous paper by a thermal printer

    I am trying to design a report (using Crystal Reports for VS2010) for a receipt to be printed on a thermal printer with continuous paper.(8centimeter paper)  Now a receipt will need to have variable height according to the number of items it contains.
    The problem is that Crystal Reports takes the page setup from those available in the print setup and all these paper sizes have a fixed length .
    How can I set the paper to a continuos paper?

    Hi, 
    When you go to Crystal Reports | Design | Page Setup there is an option for Dissociate Formatting Page Size and Printer Paper Size.  Put a check in the box.  You can set the horizontal size. 
    Also make sure you do not have anything in the page header or footer. 
    Good luck,
    Brian

  • Crystal Report Print report on different paper size (A4/Letter)

    I develop the crystal report 2008 with VS.net 2008. The report runs on web.
    when I preview or debug with VS on my local computer, the crystal report using A4 (8.3 * 11.7 in), Which is correct.
    However, after I deploy the program to the server, and try view and print report through IE, the print out is actually using Letter size (8.5 * 11 in).
    Both on my local computer and the server, the default printer is set to A4 size. And on the crystal report, in the printer setup, the paper size is A4 as well.
    I try on firefox, and safari. No luck. Same as IE.
    The crystal report need to print barcode, and the paper size must be A4, cuz the barcode page is designed and printed on A4 Avery Laser Barcode sheet.
    I tried on my PC by using remote server data souce, the printing works perfectly in A4 size (8.3"*11.7").
    And I don't know why same program after deploy to the server, then it using Letter size (8.5" * 11"), which the size I never set to.
    So strange.
    Thanks

    A few ideas \ suggestions:
    1) Make sure you are using FP 3.3 runtime:
    https://smpdl.sap-ag.de/~sapidp/012002523100016807202010E/cr2008fp33_redist.zip
    2) Try a simple win app - use saved data report (crystalreportviewer1.reportsource = <path to saved data report>). Does this print correctly?
    3) What print mode are you using; PDF or ActiveX?
    4) Try export to RPT and PDF from your web app. Does it export correctly?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Print on Fine Art Paper using Epson 9900.

    Printing.  Sigh.
    I can't get the "Fine Art" Epson papers "Hot Press" or "Cold Press" to show up in the printer dialog box.  (I pay by the hour and the square foot to use the 9900 to print works for a show that opens in two weeks, so this is both pressing and costly.)  I have tried everything I could think of (details below).  As a work-around, I exported 16-bit TIFFs, opened them on another machine in PS-CS6, and printed them.  The Epson Hot Press paper can be selected in the PS print dialog on that machine.  The print looks excellent.
    OS 10.8.5 on an Intel 2.7 GHz Core i7 MacBook Pro w. 16 GB RAM.
    Aperture 3.4.5
    (No beta-ware installed.)
    PS-CC (14.1.2 x64) on this machine.  (Do not have the version number of PS-CS6 that is installed on the other machine.)
    My studio printer is an Epson 3880.  On that printer, I have to select one of the print dialog "Paper Size" presets with "(Manual - Rear)" in the name in order for the full complement of Epson Fine Art papers to show in the "Printer Settings➞Basic➞Media Type➞Fine Art Paper" drop-down of the printer dialog box.  (I am using "print dialog box" to refer to Aperture's print dialog, and "printer dialog box" to refore to the OS print dialog box that comes up after clicking "print" at the bottom right of Aperture's print dialog box.)
    The 3880 does not accept roll paper.  One of my reasons for using the 9900 is that it does accept roll paper.  There are no "(Manual - Rear)" presets that I could find for the 9900.
    Oddly, in PS-CC (this machine), I cannot specify "Hot Press" either.  Only on the other machine (which is at the community arts center lab where I print) does "Hot Press" show in the fine art paper types.  That machine does not have Aperture installed.
    I have updated my 9900 driver, and downloaded the most recent ICC profiles for the paper.  I installed the profiles in both the system library and my user library.  I can select the profiles.
    The current driver listed on Epson's site is 9.04.  The version which shows in "System Prefs➞Print and Scan➞Epson Stylus Pro 9900➞Options and Supplies➞General➞Driver Version" is 8.64.  I have re-downloaded and re-installed.  Twice.
    I have rebooted, hard and soft.
    Any suggestions?
    Thanks.
    Cross-posted to Luminous Landscape.
    Kirby.

    Just a hunch, Kirby. I looked at the Epson support page:
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=FAQ&oid=119098&prodoid=63079720&foid=125986&cat=53461&subcat=53466
    and found in the FAQ:
    Selected FAQ
    Q: 
    Why are only matte media types displayed in the driver’s media list?
    A:
    When matte black ink is selected in the printer driver, only matte media types are displayed in the driver list. The complete media list appears only when the photo black ink is selected.
    Do you have any possibility to select the ink in the driver - matte or not? And are you trying to print glossy?

  • Printing to large paper on epson printer

    I am trying to print a document from Illustrator. The document size is 13" x 19".
    When I load Super A3 paper (13x19) into my Epson printer the printer starts and begins to print but stops about 4 inches down the paper and then ejects the whole sheet (with the remainder of the image not being printed). The epson monitor shows that the document is still processing after the partly printed sheet is ejected. The quality of the partly printed sheet is fine.
    I set up print dialogue box from illustrator to the sheet size that I am putting in. Ive tried 3-4 times with the same result.
    I am on a MAC OSX 10.5.8
    I seem to have no problems with printing to other standard sheet sizes.
    Any thoughts??

    There are a couple of things you can try; 1.) see if you have enough system memory to process the page ( it could be running out of system memory ); 2.) set an invisible holding line to the page / document and lock it ( no stroke, no fill @ 13 x 19 ); 3.)  Use the Page tool ( if you haven't already ) and set it to the document, edge-to-edge.  Also, check you ink supplies, there may be an empty cartridge preventing you from printing the entire file.  Hope this helps.

  • HT4972 How do I print?  I have a wireless epson printer.

    How do I print from my new iPad?  I have an epson wireless printer

    It is a one time charge only. It get installed on your computer and you can print from any iPad or iPhone connected to your wifi network. I print from my phone and my wife prints from our iPad.
    You can download it and try it before you purchase it. If you look in their FAQ section, there is an article about doing that.

  • Print report on customize paper on WinXP

    I need print a report on customize paper. When the report run on Windows 98, i have the option and i do it, but when a report run on Windows XP, i don't have the option .
    Thanks,
    Vera

    You have to define a custom paper size as follow:
    1. start -> control panel -> Printer and faxes
    2. In printer and faxes window:
    file --> server properties
    3. Click for add new.
    4. fill the size, the format name, etc.
    5.. do it for each printer.

  • Problem to print pdf-based forms using matricial Epson printer

    I need print pdf-based forms using an EPSON FX 2190 printer. 
    In The sap note 685571 I read that can print PDF-based forms on all printers installed in the SAP system as long as the relevant XDC file exists.
    I do not found XDC file to EPSON device type, a Epson fx 2190 do not support postscript.
    Can I use this printer to pdf-based forms?
    I need that spool request (pdf) have a output immediately on EPSON printer.
    thanks in advanced for your cooperation to solve it.
    Osmany

    I am afraid you cannot make your scenario work if there is no XDC provided. Maybe you can create one, but I don´t know how difficult that can be or how to do that. Maybe you can get more help under ABAP > Form printing where there are guys experienced with this printing details. Regards, Otto

  • Problems printing from LR 4.4 to Epson printer

    Mac 10.9.5; Lightroom 4.4; I just got an Epson Printer Stylus Photo R2000; when I print from LR it will only print a 5x7 rectangle of the picture and not the whole thing; trying to print letter size or larger; set all sizes correctly. Printer prints whole page from Apple programs but not from Light Room; I spent an hr with Epson who initially said it was an apple problem; spent another hour with Apple support which got the printer printing correctly from Apple programs but it continues to have same problem from Lightroom. So Apple said it's an Adobe problem. What do I do to get LR to work correctly?

    I am back and still having trouble with Lightroom. Someone suggested I downgrade to LR 4.1 (from 4.4) but that didn't help. To reiterate: I have a MacBook Pro, using 10.9.5. I got a new Epson Stylus Photo R2000 printer and LR is having trouble communicating with the printer. When I try to print a letter size (or other size) picture, a 5x7 partial tile of the picture prints off center bleeding to the top. The only way I can print a whole picture is the size it 5x7; then it prints the whole picture but it is still off center, not as it appears in LR print view. I have talked with Epson who said I had Mac conflicts; I spoke with Mac who got rid of the conflicts so it can print fine from Apple programs like Pages, or the internet. It is only LR that won't print right. Obviously I got a photo printer to print photos so I would like help resolving this. It has been very frustrating that although I could talk with both Apple and Epson support, when I tried to contact Adobe both by phone and Live chat I was told that LR is not supported except on this forum. So please, help. Thanks.

  • Print photos on regular paper with e-print

    I want to print photos on regular paper, when I use e-print. Is that possible?? //V

    Do let me know if it works out for you.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • How can I use iphoto with my epson printer to make my own cards?

    How can I use photos on macbook air and my own printer to make cards? I used to be able to -- but some software now only leads me to BUYING cards, or makes it seemingly impossible to manipulate the image so that I can see it on the size paper I will be using. This used to be do-able! How now? Thanks.

    When you redeem the gift card through iTunes on the computer, it goes onto your account which will allow you to purchase any item via your computer or your iPod becuase it is on your account

  • How to print report From Oracle form directly on printer

    Hi,
    I am running report from form and output should be directly printed on printer.
    Database: 11g Release2
    Forms version : 11.1.2
    Report version : 11.1.2
    OS: windows 7 professional 32 Bit
    Written following code:
    declare
    pl_id ParamList;
    varno number;
    x VARCHAR2(150);
    y NUMBER;
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    begin                
    pl_id := Get_Parameter_List('tmpdata');
    IF NOT Id_Null(pl_id) THEN
    Destroy_Parameter_List( pl_id );
    END IF;
    repid := FIND_REPORT_OBJECT('SALEBILLNEW'); -- report object name
    pl_id := Create_Parameter_List('tmpdata');
    Add_Parameter(pl_id,'copies',TEXT_PARAMETER,'1');
    Add_Parameter(pl_id,'background',TEXT_PARAMETER,'Yes');
    Add_Parameter(pl_id,'mode',TEXT_PARAMETER,'Character');
    Add_Parameter(pl_id,'printjob',TEXT_PARAMETER,'YES');
    Add_Parameter(pl_id,'VCOMPANY',TEXT_PARAMETER,:block50.coname);
    Add_Parameter(pl_id,'VCOde',TEXT_PARAMETER,:block50.code);
    Add_Parameter(pl_id,'VOURBILLNO',TEXT_PARAMETER,:BLOCK50.FROMBILL);
    Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
    Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER, 'PRINTER') ;
    Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, 'OKI MICROLINE 391 TURBO (COPY1) on NILESH-PC') ; --default printer name
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_adminserver_inorasrv-pc_asinst_3');
    y := LENGTH ('rep_adminserver_inorasrv-pc_asinst_3') + 2;
    x := RUN_REPORT_OBJECT (repid, pl_id);
    WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/rwservlet/getjobid'||SUBSTR(x,y)||'?server=rep_adminserver_inorasrv-pc_asinst_3&userid=scott/tiger@winorasr');
    Destroy_parameter_list('tmpdata');
    end;
    Above code giving following error:
    REP-52251: The output of job ID 111 requested on Thu Oct 18 18:37:20 IST 2012 cannot be retrieved.<P>REP-51026: No output is generated for job 111.
    Need help..
    Thanks in advance.

    Hi,
    I have change the printer name to OKI
    Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, '\\Nilesh-pc\OKI') ;
    Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER, 'dflt.prt');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'\\Nilesh-pc\OKI');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt.prt');
    code which i have posted above unable to reach at default printer and gives following error
    The report generated successfully but distribution to destinations failed.
    Modified above code to take default printer from registry.
    Added below code
    rtn_Registry := CLIENT_WIN_API_ENVIRONMENT.Read_Registry('HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows','Device');
    rtn_defaultPrinter := substr(rtn_Registry,1,instr(rtn_Registry,',',1)-1);
    Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, 'rtn_defaultPrinter') ;
    It is giving error
    CLIENT_WIN_API_ENVIRONMENT.Read_Registry must be declare.
    Edited by: parapr on Oct 20, 2012 10:47 PM

  • Show me how to load 4x6 photo paper in my printer and to print a photo on it.

    I have a HP Officejet 6500A Plus printer hooked up to a Windows 7 operating system

    Hi,
    To load photo paper you can follow the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02319525&cc=pl&dlc=en&lc=en&product=4083977&tmp...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for