How processing status "In Release " is set in purchase requisitions

Hi Experts,
How processing status, iun release is set in item details (Status tab page) of purchase requisition, also is it possible that release status is "release completed" even requisition is not subject to release strategy.
how release active is set.
Thank you
Anand

Hi
The Stauses in the PR will be active opnly if you have the release strategy setup for the PR.
"In release" is set when the PR is created & is subjected to approval & in the approval process.
Relased is set when the PR is approved fianlly.
Thanks & Regards
Kishore

Similar Messages

  • How do I know whitch DVD set to purchases if I want to upgrade my iBook g4  Mac OS X 10.3.9 to

    How do I know whitch DVD set to purchases if I want to upgrade my iBook g4  Mac OS X 10.3.9 to
    Mac OS X 10.4

    You need a retail DVD and not one which originally shipped with a Mac.
    (86917)

  • Release approval procedure and purchase requisition

    Hello gurus,
    just now I discovered a strange behaviour (in my view) in one of our client's system:
    There is a release strategy for certain purchase requisitions. When I create one of those, the release strategy is applied and the Requisition Processing State is set to "In release" automatically.
    But now comes the strange part: I can create a PO and copy that same purchase requisition item into it and save the PO! I.e. I can order the item, even though there was no prior release of the purchase requisition.
    Unfortunately I cannot try myself right now, but this is not standard behaviour, or is it? Where is the sense in having a release strategy when the item can be ordered anyway, even without release?
    Thanks in advance
    Alicia

    Hi Alicia,
    Go to transaction OLME -> Purchase Requisition -> Release Procedure         
    -> Procedure with Classification -> Set Up Procedure with                   
    Classification -> press button 'RELEASE INDICATOR', make                    
    'double click' in your last release indicator and check if the flag         
    'REL.FOR ORDENING' is set or not.                                                                               
    Go to transaction OLME -> Environment Data -> Define Attributes of          
    System Messages, and see if you have defined the message                    
    06 055 as warning or error?                                                 
    Please check additionally if you have in EBAN (for the requisition) the fields FRGKZ, FRGZU, FRGST filled with entries.
    Also deactivate your user exits and check the behaviour again (see note 365604).
    Regards,
    Edit

  • How can i develope a report for getting purchase requisition details

    how can i develope a report for getting purchase requisition details like mrp controller release date unit of measure

    Hi,
      Go to Tcode ME53(Purchase requisition display). Give any preq number and click the item overview button..
    in the next page click select one item and press item details button(or F2 button)..In the next page all your requiresd fields will be there.. put cursor in reqd field and press f1.. in the pop up box press techical details(hammer button) to get the field name as well as the transparent table.. Use those fields and table in ur program..
    hope it helps
    Award points if it helps

  • Is there a link between ASCP released planned order and purchase requisition?

    Hi,
    i'm new to EBS. would like to know is there some kind of link on table level between a released planned order with purchase requisition?
    thanks

    Hi,
    As explained by Abhishek, we do not maintain any link between the PLANNED ORDER from which a requisition is created and the actual requisition.
    The simple reason being... in general, businesses run the plans on a daily basis and each time the plan is run, the previous data is overwritten... so there is no point in retaining the information of the planned order from which you are creating the requisition.
    Hope that helps.
    Regards,
    Mohan Balaji
    NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

  • How to show field at item detail level (purchase requisition layout)?

    Hi, gurus!
    We're trying to get field "processor" shown at item detail level (release strategy tab) when we create, modify or display
    a purchase requisition.
    We click on right button, select "Show" and get column name "Processor" in displayed columns and save layout as default,
    but that field is not visible when entering again transactions ME51N, ME52N or ME53N.
    Could anyone help us?
    Thanks in advance
    Regards,
    J Madariaga

    J,
    This field on the release strategy tab is linked to workflow.  You can maintain the "Processor" data by each release group and release code in the IMG menu path:  Materials Management -> Purchasing -> Purchase Requisition -> Release Procedure -> Set Up Procedure with Classification.'
    Here you enter a processor's entry under Workflow:
    Grp: Release group
    Code: Release code
    Plant: Plant
    Agent type: US is user
    Agent ID: UserID
    Once this is maintained, you return to the Release Codes section and enter a "1" by each Grp/Code where a workflow entry was created in table T16FW.  When you look at the release tab in the PR that has the same code as the one you created in the configuration, you will see the Workflow username (First and Last Name) in the "Processor" field.
    Hope this helps.

  • How do you convert a quotation into a purchase requisition?

    How do you convert a quotation into a purcahse requisition?

    Hi Ganesh
    But from ME51N in shows selection varaint it show RFQ for creation of Requisition but when you drop the RFQ to header for creation , it is not working..
    Chek again.
    Kishor
    Hi Christopher
    See Purchase requisition creation can happen without vendor and price details as well.
    so once you have finalised your vendor and price ,you can put the vendor and price details  in PR and then PR can go further for approval...there will be some manual work ,,but I do not think any more option available.
    hope its logical,.
    Kishor

  • How to capture an error while creating a purchase requisition

    Hello All,
    I append 50 line items while creating a PR using BAPI_REQUISITION_CREATE and I get an error in RETURN.
    So can I capture the line item which exactly has that error.
    I mean to say how to figure out the line item with error, if the BAPI gives an error.
    Please suggest.
    Thanks & Regards,
    Tarun Gambhir

    I could not find TEST_RUN option in these bapis
    Roundway will be
    1. Use BAPI_REQUISTION_CREATE with single line item  and create PR then take the requisiton number
    2. Use ME_UPDATE_REQUISITION. and add line by line into same PR (Within loop)
    BAPI_REQUISITION_CHANGE can only be possible to edit existing line and you cannot able to add new lines,
    a®s
    Edited by: a®s on Jul 29, 2009 11:13 AM

  • No release strategy tab for purchase requisition

    Hi Gurus
    i have a user who is complaining about the release strategy not appearing after saving the requisition, but when i try to test it from dev using his profile, it works fine. he can create the req fine on other pc's but not on his pc. i have check his patch level and if he is using the latest gui version and he has both.
    what could be causing this issue?
    Please help
    thank you in advance

    Hi Roy
    thanks for the reply
    am i  supposed to check this on his profile? he is the only person getting this issue other users are working fine. so my assumption is that it must something to do with his sap settings but i dont know the technical side of sap
    please help

  • How to Restrict one more line item in Purchase Requisition

    Dear SAP MM Guru's
    My business Requirement is to Restrict one more line item to create in Purchase Requisition,
    Using T code : ME51N  i have  created a PR with 10 (TEN) Line item's on 20 June '14 ,
    Using T Code : ME52N  on 23 June '14 my business demands to add one more line item 11th  with different material code in Purchase Requisition .
    Now Sourcing Team is demanding  is once Purchase Requisition is created Don't allow to create one more Extra line item in same PR .
    Through an Error : " One More Line Item is not possible to ADD "
    Can i use below BAPI :
    1) BAPI_PR_CHANGE
    2) BAPI_REQUISITION_CHANGE
    Please do the Needful
    Thanks & Best Regards
    Kumar

    Hi,
    Change Screen layout for PR.
    For ME52N make Material number and Material description/short text fields to 'Only display'. By this user cannot enter new material code or direct material description to add new item.
    In this scenario check :
    1. Create new with reference to another PR by adopting details.
    2. Check with Change push button behavior within ME52N and ME53N transactions available.
    3. Consider remove ME52N authorizations from users (& Change Push button also from ME53N).

  • Processing status & release status

    Hi,
    There is a configuration which says: DEFINE processing status.
      Can somebody expalin in details the use of it  .
    In short i would like to know about the processing status & release status.
    thanks,
    prithika

    Prithika,
    Processing Status and Release status work closely both are interlinked. you can define processing status and assign it to condition record. Release status controls in which scenarios the condition record are found.
    The release status can only be maintained directly for agreements. For condition records, this is done via the processing status.
    Configuration for Processing status can carried out using
    IMG --> SD --> Basic Functions --> Pricing --> Define Processing status
    Here you can create processing status and Release status will be assigned according to the scenarios if it were "B",  "Release for pricing simulation" will be assigned to the processing status.
    Using Tcode SM30, choose Table/View: "/BEV3/CHA_KOND".
    Activate Enter Conditions Indicator
    Click maintain and use the options provided.
    Regards
    Sathya

  • Disable processing status "Locked" for tempaltes

    A template in cProjects has these processing statuses:
    - created
    - released
    - locked
    - obsolete
    I would to deactivate the status "locked".
    Is this possible? If yes, is it also possible if there are already templates that are "locked", or should i "unlock" then before.

    Hi Daniel,
    You can achive this through transaction BS12.
    Select object type DX1 (Project Template). Then Go to Allowed business transaction from the menu bar.
    Untick the business transactions DX07 and DX08.
    The above mentioned steps will decativate lock and unlock status for cProject templates.
    Regards
    Amit

  • Release strategy for purchase requisition does not kick in

    Hi Gurus!
    I've been struggling with this issue for some weeks now.
    I have set up the release strategy configuration for purchase requisitions with classifications.
    However, if I create a purchase requisition the release functionality is not taken into account by the system.
    See below some more information regarding my configuration:
    1. I've created a new characteristic "REL_PR_GROUP". Status: released, Multiple values, Number of Chars 3, 7 values (TR1, TR2, TR3....TR7), Table name: CEBAN, Field name: EKGRP, Procedure for value assignment set to not ready for input.
    2. I've created a new class: "REL_PR_ANPC". Class type 032, Status: released, Same classification: do not check, Char: "REL_PR_GROUP"
    3. I have one release group "T1", Rel. object 1, OverReqRel is marked, Class: "REL_PR_ANPC"
    4. I have 5 release codes. Grp: T1, Code: 01....05
    5. I have 2 release indicators:
    "R = Released", Rel. for ordering is marked, Changeabil: 4, Value chgs. 100,0
    "X = Blocked",  Changeabil: 4, Value chgs. 100,0
    6. I have 1 release strategy:
    "T1 with Grp T1"
    - one release group, 01 Manager
    - release prerequisites not applicable because of only one release group
    - release status, nothing marked = blocked, 01 marked = released
    - classification, purchasing group is TR1 or TR2 or TR3 or TR4 or TR5 or TR6 or TR7
    I intentionally kept the configuration as simple as possible so I can try to get it working first.
    Now if I create a purchase requisition for an item with release group T1, I would expect the release strategy to be activated. However, this is not the case. I don't see the "release status" tab in the PR, and if I try to relase via ME54 the system says the PR is not relevant for release.
    Could you please assist in getting this working?

    Hi,
    Have you checked in CL30/CL30N if your release strategy is derived successfully?
    See section 3 of Note 365604. A small section of it:
    You can use transaction CL30 search for an object using the data
    of the purchase requisition/purchase order. Here, it is important
    that the object search determines exactly one strategy. If this
    is not the case, this indicates that there are overlapping
    strategies in the system or that the release strategies in
    Customizing do not correspond with those from transaction CL24.
    See the previous point. If the object search returns more than
    one result, the system subsequently determines an incorrect
    release strategy or no release strategy at all.
    If it is derived successfully, next, check the user exit EXIT_SAPLEBND_001 as per Note 371667:
    The following assignment statement has to exist within activated SAP
    enhancements M06B0002 (include zxm06u13) and M06B0005 (include zxm06u31)
    for purchase requisitions:
         E_CEBAN = I_CEBAN.
    Regards,
    Purnima.

  • Purchase Requisition Field mandatory in External Service processing order

    Dear Team,
                    I am running one scenario, wherein i am creating an Corrective maintenance order and i am using control key for external Service processing and entering the services and its rate and releasing the order. Now While Releasing the order the purchase requisition field entry is mandetory. I want to set this field as optional only. I checked the settings in PM based on order type as well as checked in MM based on purchase requisition creation but i didnt fount this field set as mandetory.
                      can any body help me out for this
    Regards
    Amar Jadhav

    Hi
    I think while creating Order you have made PR field as Mandatory
    Please check in OIAN.
    Steps as follows
    Follow the path as below in Config
    SPRO>Plant Maintenance & Customer Service>Maintenance & Service Orders-->Define Field Selection for Order Header(PM)
    Go to Field selection for Order Header Data
    (OIAN)
    Go to Influencing
    Double click on Order type
    Now Enter the required Order type and Press Enter
    Check for Field for Reservation/Purc.req --CAUFVD-AUDISP
    Make it input if it is Required Field.
    Give Points if it solves
    Thanks,
    Manish
    Edited by: Manish Chachra on Aug 8, 2008 12:18 PM

  • Report of who released purchase requisitions

    Hi,
    Is it possible to get a list of which user released a group of purchase requisitions? A list display would be ideal, but if somebody could let me know a table that holds the information that'd be good also.
    Thanks,
    Richard

    Hi Richard,
    Try to use the table CDHDR where object class will be BANF & Object ID is purchase requisition number appended by "00". In this table you will be getting information about the status of your Purchase Requisition. It will give all the changes that has happened in the PR. Fetch the data gainst Tcode as ME54N & the usernames. The usernames that will appear against the tcode ME54N are the ones who are releasing the PR.
    Ask ABAP person to fetch these data & make a report.
    I hope this will help.Reward if its helpfull.
    Regards
    John

Maybe you are looking for