How profit center node can be change in standard hierarchy
Hi All,
Please help me to know, can we make changes to the node of profit center or of a profit center group after activating both, through KCH5N.
Thanks & Regards,
Prafful Kansal
Prafful,
Yes, you can make changes to the nodes of std hierarchy.
Please select your std hierarchy of Profit Center in KCH2. Then you select the Profit Center Group or profit center by pressng F9 after putting the cursor on the same. Now, the screen get three new buttons to deselect, insert at same level and insert at lower level. By utilising these buttons to insert the selected PC or PC group to next node at the same level or lower level. You need to put the curson on the Prroft Center Group and select the button according to the requirement. Once, your work is over, you can save. If you made mistake, you can come out without saving. This functionality of select and insert, is same like drag and drop. One time exercise will make you master in this.
Trust this helps much
Cheers,
Similar Messages
-
User exit to populate profit center in production order change (CO02)
Hello,
The requirement is to populate the profit center in production order change (Tcode CO02). I know the user exit that can populate profitcenter in CO01 but it's not called in CO02. Ther other user exits that I found are for checking but not for changing
Is there a user exit /BADI that can acheive this requirement?
Thanks a lot for your advise.
JoeHi,
Use the user exit PPCO0007 ,function module EXIT_SAPLCOZV_001
HEADER_EXP-PRCTR
Thanks,
Shailaja Ainala. -
Hi , I cant use the music bar in the control center I can only change the volume but I cant skip tracks or pause the song or play it. anyone knows the solution or the reason please?
That's normal.
Use the Touch ID to unlock passcode.
http://help.apple.com/iphone/7/#/iph672384a0b -
How many server nodes can you create per instance
Hi,
Very often the bottle neck in a java installation (NW04s) is the heap size. In order to increase the heap you simple create new server nodes.
My question is:
How many server nodes can you create per instance?
Is there an upper limit before you have to create a new dialog instance (with a web dispatcher)?
I can imagine that when you create a new server node you also have to increase the heap and max therad of the dispatcher. Is there any upper limit of the heap size of the dispatcher node ?Rasmus , I think you laid out a real good scenario for every one to contribute
I may be very late but just updating this forum for benefit of everyone who visits this.
In addition to all the points above one must also consider following things if one decides to add more server nodes to one dispatcher
1.Garbage collection time
2.Dispatcher would keep on sending request to node S2 if it is not completely bad and there by impacting all the servernode so you might end up restartiing the entire cluster.
3,Debugging also becomes diffculy as you are not sure on which server node you are within the cluster.
4.If you have something like F5 which does hear beat monitoring even one server node goes bad F5 will not report anything.
So in my view one server node per dispatcher is an ideal configuration.
Over All Dispatcher does not consume more resouces (Disk Space + CPU + memory ) at the same time it will give you maintenance flexibility.
Nothing is right or wrong ,all these things are based on how your infrastructure set up is.
Cheers !!
Manish Jain -
all my components are grayed out in multisim11. Path to my config file in global preferences is also grayed out, can't change to standard cfg
Solved!
Go to Solution.Hi Escapermark,
Have a look at these knowledge base articles, the first one should fix the gray out problem:
http://digital.ni.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F
http://digital.ni.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F
http://digital.ni.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument
Tien P.
National Instruments -
Hi, I want to know the effects that I could have if I change the standard hierarchy of my Cost Center Group.
Elsa,
You could change your standard hierarchy but after you will have problem with your analyses.
you will not be able to compare yours data. The reports are based one the Standard hierarchy.
But if your can explain the differences to your company ....
Regards
Valérie
Message was edited by: valerie secondy -
How to get the profit center nodes descriptions
Hi Experts,
i have value of profit center 17007236. but i need to get the hierarchy above this profit center and their descriptions. previously i have done similar kind of problem, but i that case i have top level node from which i have extracted bottom level descriptions and profit center values. this can be referred in the below link.
Re: Profit Center Groups
but now i have profit center values but i need to get the above hierarchy value and descriptions. which are shown in bold letters.
any suggestions or any function module available please kindly reply me. point will be rewarder for all answers.
<b> 5 SOI_STREAM Downstream PPS
5 SOI5000007 DOWNSTREAM NON-OPERATING BU'S
5 SOI6IS0001 INTEGRATED SUPPLY TRADING
5 SOI7IS0091 IST EAST COAST
5 SOI7IS0092 CHICAGO PRICING BASIS
5 SOI7IS0100 (CHG) CHICAGO BASIS GAS BOOK
5 SOI7IS0126 MARKETING CHICAGO BASIS GAS </b>
17007236 CHG 4022 GRAFTON OH (LTAZ)
17007326 CHG 4022 GRAFTON OH (LTAZ)
Thanks & Regards,
Poorna.Hello Poorna
The following sample report may be useful to you. The sample cost center was taken from the cost center group 'H1' on our IDES ECC 5.0.
*& Report ZUS_SDN_COST_CENTER_BOTTOM_UP
REPORT zus_sdn_cost_center_bottom_up.
TYPE-POOLS: abap.
DATA:
gd_setid TYPE setid,
gt_supersets TYPE STANDARD TABLE OF setlist,
gs_setlist TYPE setlist,
gs_setinfo TYPE setinfo,
gt_setinfo TYPE STANDARD TABLE OF setinfo,
gs_costcenterdetail TYPE bapi0012_ccoutputlist,
gt_return TYPE bapirettab.
DATA:
gs_layout TYPE lvc_s_layo.
PARAMETERS:
p_kokrs TYPE kokrs DEFAULT '1000',
p_kostl TYPE kostl DEFAULT '2-1110'.
START-OF-SELECTION.
CALL FUNCTION 'BAPI_COSTCENTER_GETDETAIL1'
EXPORTING
controllingarea = p_kokrs
costcenter = p_kostl
* KEYDATE = SY-DATLO
* MASTER_DATA_INACTIVE = ' '
IMPORTING
costcenterdetail = gs_costcenterdetail
TABLES
return = gt_return
* EXTENSIONIN =
* EXTENSIONOUT =
CALL FUNCTION 'G_SET_ENCRYPT_SETID'
EXPORTING
setclass = '0101' " cost center group
shortname = gs_costcenterdetail-costctr_hier_grp
kokrs = p_kokrs
IMPORTING
setid = gd_setid
EXCEPTIONS
no_co_area_specified = 1
illegal_setclass = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'G_SET_GET_ALL_SUPERSETS'
EXPORTING
* CLIENT =
setname = gd_setid
TABLES
supersets = gt_supersets.
CLEAR: gs_layout.
gs_layout-cwidth_opt = abap_true.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
i_structure_name = 'SETLIST'
i_grid_title = 'Supersets'
is_layout_lvc = gs_layout
TABLES
t_outtab = gt_supersets
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_setinfo.
LOOP AT gt_supersets INTO gs_setlist.
CLEAR: gs_setinfo.
CALL FUNCTION 'G_SET_GET_INFO'
EXPORTING
class = '0101' " Cost Center Group
* NO_SET_TITLE = ' '
setname = gs_setlist-setname+4
* TABLE = ' '
* FIELDNAME = ' '
* USE_TABLE_BUFFER = 'X'
* CLIENT =
IMPORTING
info = gs_setinfo
EXCEPTIONS
set_not_found = 1
illegal_field_replacement = 2
OTHERS = 3. .
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
APPEND gs_setinfo TO gt_setinfo.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
i_structure_name = 'SETINFO'
i_grid_title = 'Setinfos'
is_layout_lvc = gs_layout
TABLES
t_outtab = gt_setinfo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
Regards
Uwe -
Validity From Field is not available in Profit Center Display KE53 or Change KE52
Hello Experts,
In profit center display or change in F4 help i am not able find the Validity From Date option, in this below snap shot validity To option is there but validity From Date
option is not showing, can any one tell me how to get Validity from Filed.
Thanks in Advance
AIMHi,
Any suggestions regarding the below mentioned issue?
Thanks &Regards,
Prasad -
In which screen the Profit Center field can be seen in SAP CRM Product Master?
Hi SAP Experts,
Please provide your valuable inputs on the below request:
1) Do we have profit center field in SAP CRM Product Master?If yes then in which screen can we see?
2) At the moment we are not using the profit center field in either of the systems(ECC and SAP CRM) in Material, we want to use this then how to go ahead to have this field in CRM.
3) If we add the profit center value in material master in ECC under general and plant data view then how this value will be replicated into SAP CRM , delta load or initial load?
We are using SAP ECC 6.0 and SAP CRM 7.1 systems.
Appreciated for your inputs at the earliest.
Best Regards,
SVHi,
Substitution Rule :-
Prerequisite :
1. WBS Level (PRPS-STUFE) = ' 3 ' AND Statistical Indicator (PRPS-XSTAT) = ' X '
Substitute
1. Profit centre (PRPS-PRCTR) - ' '
Hope this will clear you...
Regards,
Hari -
How can I change a standard webservice
What steps are necessary for me to change the SAP webservice from SAP ESR?
I WANT to do this in ABAP.
I know that there are some BADIs and Enhancements spots available . But how does this fit into the whole Wesbservice interface.
For example :
I want to add a new field to the input structure in the WSDL. This field will then have to be mapped to the BAPI and so on. How can do this. have you come across anything like this? How does BADI work in this case.
Details :
http://esoadocu.sap.com/socoview/render.asp?packageid=DBBB6D8AA3B382F191E0000F20F64781&id=2828AC800DDD11DC2B24000F20DAC9EF
I want to be able to modify this service.
Add a parameter like DocumentStructure to the input which will let me create a document inside the folder.
I know that there is a proxy class in the backend CL_DMS_DOCUMENTCRTRC1 or something like that which calls the BAPI BAPI_DOCUMENT_CREATE2. This BAPI has the additional fields I am looking to map to.
How can I use BADI to accomplish my goals? how can I change the WSDL interface ?
How is this service tied to a Proxy class in the backend?
Am I getting ahead of myself? Is this do-able or should I start from scratch ( expose my BAPI as a new WS )?
Thanks for any pointers.Did you read the "Enterprise Service Enhancement Guide" at https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0bb5687-00b2-2a10-ed8f-c9af69942e5d ?
- julius -
Balancing field "profit center" error can not fixed by define doc split.
Dear all,
I am creating invoice by FB60 and hit error
I open Performance assistant, and follow the instruction that link to "Define Document Splitting Characteristics for General Ledger Accounting".
I made the "Zero balances" as unchecked, save, and then I could post the vendor invoice.
Then, I come back to FB60, try to generate the other invoice and hit the same error.
I open "Define document spilliting ..." again, made Zero balances as checked, then I posted invoices successfully.
But again, when I come back, I still got the same error.
Filling the profit center in first line item couldn't solve the problem.
Please help if you got any ideas about this error.
Thank you a lot.
Rgds,
Linh
Edited by: LinhDT on Jan 11, 2011 9:55 AMhi,
Please check whether below mentioned SAP note can help
36677 Structure of components for customer messages 10.01.2011
1545820 PAM03: Error message GLT2201 when settling a requirement (2) 05.01.2011
1039346 F&A: RCIPE00/RPCIPE01 - distribution of liabilities 05.01.2011
1497092 RW-Schnittstelle: Buchungssplit im FI für Eingangsrechnungen 03.01.2011
1070629 FAQs: New general ledger migration 21.12.2010
1541401 PAM03: Error message GLT2201 when settling a requirement 20.12.2010
1455357 BST Brazil: Balancing Field Not Filled 07.12.2010
1525261 FPRV: Profit center (PRCTR) is inherited incorrectly 03.12.2010
1353125 AC interface: Document split in FI for incoming invoices 29.11.2010
111491 1KEK: Valuation differences gross / net 24.11.2010 -
How can we change the standard RSS XML of WPC pages
What are the properties of the standard RSS XML of the pages those are created with Web Page Composer and how can we change the XML?
Decided to do not use.
-
Can I change the standard text for web item 'INFO_FIELD_ITEM'?
Hello experts.
I made a WAD template using web item 'INFO_FIELD_ITEM'. In data binding, I used the 'Last refresh' of general text elements. As a result, in the web browser I can see the last update date & time. (e.g. 'Last refresh: 2007.01.17 17:34:44') Then our customer want to change the default text "Last refresh" as "Working time".
How can I change this?
I tried to change the text symbols for program SAPLRRSV. But it worked only in Bex Analyzer not in the web.
Our server version is Netweaver 2004s and SP10.
Best regards.
JY Park.Hello,
I had the same problem - just wanted to display the values of a variable in an info-field, but not the caption.
I found out, that there's a tag for Info-Field Item called ONLY_VALUES (it's the checkbox under the headers visible checkbox in the properties dialog of the Info-Field Item; in my WAD version, there's no label assigned to this checkbox, so it was not easy to find out what it should be),
You have to set it to 'X' (check it) ; then you get the unformatted value of the variable (no caption anymore).
<bi:INFO_FIELD_ITEM name="INFO_FIELD_ITEM_1" designheight="500" designwidth="350" > <bi:WIDTH value="350" />
<bi:HEIGHT value="500" />
<bi:DATA_PROVIDER_REF value="DP_1" />
<bi:HEADERS_VISIBLE value="" />
<bi:ONLY_VALUES value="X" />
You have to insert the info-field item between span tags so that you can define your own formatting values.
The ONLY_VALUES tag works the same as the tag 'RENDER_AS_TEXT' you have with the text item , see
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
There's only one disadvantage: If you have chosen a lot of variable values (multiple selection), the variable string gets very long and no line break is performed, because all blanks in the string are replaced by nbsp's. I solved this with a little Java Script, replacing the appropriate nbsp-s with br tags.
Hope it helps
Beate -
How in the HECK can I change my Hard Drive icon??!??!!
I've tried searching these discussion forums for how to do this, but the question has always remained unanswered! Does ANYbody know how to use this? I'd buy applecare but I'm a student and can't afford it. Would somebody please figure out how to make it so that you can paste a new icon on top of the standard icon for 10.3.9? It's driving me crazy that after I copy the icon I want to use for my hard drive that I can't paste it on top.
And I've tried doing a permissions repair in Disk Utility.
400 MHz PowerPC G4 Mac OS X (10.3.9)That's how other people do it, HVlaar; it's the standard procedure. Works fine for me. Are you logged into an admin account? Have you considered that changing your hard drive icon probably isn't an important thing to do anyway?
-
How do I/or can I change pb ownership
I just gave my friend my older g4 pb, 15" 166mghz. I had a new hd installed with os 10.4.9. how can I get rid of my user folder and have my friend as the only user... we have created a new user/id but the pb wants to defer back to my user folder...
do I need to do total os install to have only my friend as the sole owner?I looked over that link, and it does have one pitfall. It is asking a user to use rm command in single user mode, which basically is superuser. This with a typo can have devastating effects such as a complete wipe of a hard drive. Be very careful.
Maybe you are looking for
-
NOKIA, ARE YOU FINALLY GOING TO FIX THE EMAIL IN E...
Almost 4 months after I bought this stupid device, I still can't use it as a messaging device - I tried several types of setup and it always failed because of BUGS. I have 3 gmail accounts and here is what I tried: 1. I created Nokia Messaging accoun
-
Where is "Assign Random Colors To Parts" in Acrobat 9 Pro Extended?
In Acrobat 8 3D there was "Assign Random Colors To Parts" in the Enhance tab of the Conversion dialog box. Where did it go in Acrobat 9 Pro Extended?
-
User receiving two mails for a single shc to approve
Dear Experts, we have a scenario in which same user exists in 2 purchase organizations , one as virtual user, however when a shc created from purchorg1, user receives approval mail twice which shouldn't happen.When a shc created and approved, po crea
-
EC-CS - Problem with rollup in consolidation
Hello SAP Guru, We have a manufacturing client who went live last month with a technical upgrade from 4.6C to ECC 6. We use EC-CS and are in the middle of completing our first month-end process. We encountered a problem during profit centers rollup
-
Failure to Install Adode Player
He guys I have been trying to install the Adobe Flash Player in the windows xp.When I install from the adobe.com the process does not go up to the end. I have tried to download through other facilities and install, but when I doubleclick to install t