How register the ECC to SLD

Hi All,
I know the we could use RZ70 to register the ABAP system to SLD
but it seems RZ70 only could register it as the technical system in SLD
but i am wondering is it possible to register the client as the business system in SLD?
let's say: ECC host is erp, and the client is 100, how to register ERPCLNT100 into SLD automatically???
thanks a lot

hello,
Please go though the Below URL PDF file ..
It will surely Help you...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/204994f3-0e44-2a10-17b3-808fbd8db4aa
Regrads,
Vivekanand Pandey

Similar Messages

  • How register the ECC Client to SLD  automatically

    Hi All,
    I know the we could use RZ70 to register the ABAP system to SLD
    but it seems RZ70 only could register it as the technical system in SLD
    but i am wondering is it possible to register the client as the business system in SLD?
    let's say: ECC host is erp, and the client is 100, how to register ERPCLNT100 into SLD automatically???
    thanks a lot

    Hi,
    From PI7.0 onwards ECC client registered automatically  in SLD.
    Check more on PI installation guidelines.
    Re: Installing PI 7.0
    Thanks.
    Boopathi
    Edited by: Boopathi Thangavel on Jun 30, 2008 8:55 AM

  • I want to sync a second ipod touch to itunes, however my daughter has some how registered the new ipod  under my sons old one, she has deleted asll content and i have now reset it, how do i stop it being recognised as the old one

    my daughters new ipod touch is being recognised as my sons old one on itunes,this has caused the ipod to lock and she has lost all content. i now want to get itunes to recognise her new ipod , but it is still recognising it as the old one, how can i sort this out

    Does both your Windows and Macbook iTunes have the same library of songs?
    if it  does then, much easier to proceed, else try to load the Macbook with the same library as Windows.
    Note that only one of the Macbook USB port is good for iPod Classic, the other is too slow and may cause timeout, and I would suggest disconnect all other USB devices, while you Restore or Sync the iPod Classic.
    Connect the iPod to the Mac, (if iTunes launch, please close it back.)
    Use Disk Utility -> select the iPod Device->First Aid->Repair (use option FAT32)
    After the Repair complete, eject the iPod.
    Connect back to the Mac
    When iTunes launch, Restore the iPod when Prompted, (use FAT32)
    Sync your library.
    Good Luck!

  • How to register the recipient when create job by function

    I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
    Can you tell me how to register the recipient when create the job.
    ( in sm36, it is easily to do but how to do in coding? )
    regards,
    slam

    Hi
    I think in Back ground using the above fun modules you can't send a mail to the receipient.
    see the use of the above fun modules;
      IF p_bjob = 'X'.
        CONCATENATE sy-cprog sy-datum sy-uzeit
                    INTO jobname SEPARATED BY '_'.
        CALL FUNCTION 'JOB_OPEN'
          EXPORTING
            jobname          = jobname
          IMPORTING
            jobcount         = jobcount
          EXCEPTIONS
            cant_create_job  = 1
            invalid_job_data = 2
            jobname_missing  = 3
            OTHERS           = 4.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          IMPORTING
            out_archive_parameters = arc_params
            out_parameters         = print_params
            valid                  = valid
          EXCEPTIONS
            archive_info_not_found = 1
            invalid_print_params   = 2
            invalid_archive_params = 3
            OTHERS                 = 4.
        IF valid = chk.
          SUBMIT ybrep
                          WITH < sel Screen>
                          AND RETURN
                          USER               sy-uname
                          VIA JOB            jobname
                          NUMBER             jobcount
                          TO SAP-SPOOL
                          SPOOL PARAMETERS   print_params
                          ARCHIVE PARAMETERS arc_params
                          WITHOUT SPOOL DYNPRO.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              jobcount             = jobcount
              jobname              = jobname
              strtimmed            = 'X'
            EXCEPTIONS
              cant_start_immediate = 1
              invalid_startdate    = 2
              jobname_missing      = 3
              job_close_failed     = 4
              job_nosteps          = 5
              job_notex            = 6
              lock_failed          = 7
              invalid_target       = 8
              OTHERS               = 9.
          IF sy-subrc <> 0.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
            MESSAGE i029 WITH jobname.
          ENDIF.
        ELSE.
          MESSAGE s000 WITH text-003.
          STOP.
        ENDIF.
      ENDIF.
    Reward points if useful
    Regards
    Anji

  • A friend created 3 accounts on his iPhone 5 but forgot the passwords. He can't reset the password as yahoo address is no longer valid. Erasing the phone doesn't solve the issue. How to register the phone with Apple?

    A computer illiterate friend created 3 accounts on his iPhone 5 but forgot the passwords. He can't reset the password as his yahoo address is no longer valid. Erasing the phone doesn't solve the issue as the Apple server identifies the hardware as registered. How to register the phone with Apple?
    I helped him create a new email address and new iCloud account on my Mac but when we try to register the phone with Apple it says: Maximim accounts limit reached for this device. How can he register the phone? I read different threads and found out that only Apple care can do that. We're in Romania and don't know where to call. Any suggestions on how we fix this?

    When I checked the support site for Romania, you apparently don't have an Apple Care contact center.  You "may" try calling the US Apple care number to verify the account and have the password reset sent to a different email address.  800-694-7466

  • How to register the same schema with same URL

    I'm getting ORA-31085 error when try to register the same schema with same URl.
    My requirement is that I should be able to reregister the same schema with the same URL .
    I'm using the following function :
    PROCEDURE validateXmlSchema(inp_xmlMsg IN VARCHAR2,
    out_isValidDoc IN OUT NUMBER,
    inp_xmlSchema IN OUT VARCHAR2,
    out_varchar_notused OUT VARCHAR2)IS
    xmldoc XMLType;
    res number;
    BEGIN
    xmldoc := XMLtype(inp_xmlMsg);
    res := xmldoc.isSchemaValid(inp_xmlSchema);
    IF (xmldoc.isSchemaValid = 1) THEN
    out_isValidDoc := 1;
    ELSE
    out_isValidDoc := 0;
    END IF;
    END validateXmlSchema;
    This is used recursively.Until the schema is not validated for a given URL this function should keep on throwing error and once the schema is validated the data should be inserted in the DB.
    But its not happening as of now instead the ORA-31085 is thrown second time.
    Plz provide pointers to solve the issue.

    "mjs" <[email protected]> wrote in message
    news:g7kjk5$o6$[email protected]..
    > "mjs" <[email protected]> wrote in message
    > news:g7gl2g$i3d$[email protected]..
    >> "Zorrrro" <[email protected]> wrote
    in message
    >> news:g7gcjv$a6n$[email protected]..
    >>> I'm completely nuckered trying to find an answer
    for this...
    >>>
    >>> Does anyone know how to keep the same width an
    position of the submenus
    >>> of a
    >>> horizontal dropdown menu?
    >>> Thank you in advance.
    >>>
    >>> Cheers.
    >>
    >> Doesn't a simple style="width:200px" in the input
    tag work?
    >
    > I'll asume the answer is "yes", then. ;) You're welcome.
    I believe the OP is talking about a dropdown menu like this
    one
    http://www.tjkdesign.com/articles/keyboard_friendly_dropdown_menu/default.asp
    not about a "select menu".
    I could be wrong though...
    Thierry
    Articles and Tutorials:
    http://www.TJKDesign.com/go/?0
    http://developer.yahoo.com/
    helps you build applications and mashups

  • How to register the most current outlook connector

    I found some previous post that were able to help me figure out how to remove the existing miscrosoft office conenctor, but the commands offered to register the current outlook connector went unrecognizable by my computer.  Result being that there is not an outlook tab available when trying to set up synchronization.   
    I am using office 2007 if that helps and desktop manager 5.0 
    Thank you for any help
    Solved!
    Go to Solution.

    So you have Outlook 2007 and Desktop Manager 5.0 and when you go into the sync options you don't see Outlook? Which choices do you have?
    Take a look at this KB article to see if it helps - http://www.blackberry.com/btsc/KB02362
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • How can I register the iTunes without a credit card? No "None" can be selected but only different kinds of credit cards. Thanks!

    How can I register the iTunes without a credit card? No "None" can be selected but only different kinds of credit cards. Thanks!

    Get an iTunes gift card & redeem that in iTunes using your existing Apple ID.
    Then the option for none, regarding a credit card should appear.

  • HI GUYS, HOW CAN I REGISTER THE ADOBE CREATIVE CLOUD ON MY MACBOOK AFTER REGISTERING IT ON MY IMAC THX TO ALL

    HI GUYS, HOW CAN I REGISTER THE ADOBE CREATIVE CLOUD ON MY MACBOOK AFTER REGISTERING IT ON MY IMAC THX TO ALL

    I am not clear on what you mean by "register" but if you mean you want to install it on another machine then you just need to install it the same way you did for the first machine.

  • HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    If you look at the User Tips tab, you will find a write up on just this subject:
    https://discussions.apple.com/docs/DOC-4053
    The subject of buying/selling a Mac is quite complicated.  Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
    SELLING A MAC A
    Internet Recovery, and Transferability of OS & iLife Apps
    Selling an Old Mac:
    • When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
    • Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
    Internet Recovery:
    • In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
    • Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
    iLife Apps:
    • When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
    • Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
    • It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
    SELLING A MAC B
    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
    A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    B. Clone to an external drive using using Carbon Copy Cloner.
    1. Open Carbon Copy Cloner.
    2. Select the Source volume from the Select a source drop down menu on the left side.
    3. Select the Destination volume from the Select a destination drop down menu on the right
    side.
    4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
    sure to opt for that.
    Destination means a freshly erased external backup drive. Source means the internal
    startup drive. 
    Step Two - Prepare the machine for the new buyer:
    1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
    2, Remove any Open Firmware passwords or Firmware passwords.
    3. Turn the brightness full up and volume nearly so.
    4. Turn off File Vault, if enabled.
    5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
    A. Snow Leopard and earlier versions of OS X
    1. Insert the original OS X install CD/DVD that came with your computer.
    2. Restart the computer while holding down the C key to boot from the CD/DVD.
    3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
    Optionally, click on the Security button and set the Zero Data option to one-pass.
    4. Install OS X.
    5. Upon completion DO NOT restart the computer.
    6. Shutdown the computer.
    B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because
    it is three times faster than wireless.
    1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
    Utilities window appears.
    2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button. 
    3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
    on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
    and set the Zero Data option to one-pass.
    5. Click on the Erase button and wait until the process has completed.
    6. Quit DU and return to the Mac OS X Utilities window.
    7. Select Reinstall Lion/Mountain Lion and click on the Install button.
    8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • My friend bought an ipad mini and gave me his old iPad. how can i re-register the iPad in my name so that i can sync it with my macbook air?

    My friend bought an ipad mini and gave me his old iPad. how can i re-register the iPad in my name so that i can sync it with my macbook air?

    Setup as new
    Settings>General>Reset>Erase all content and settings

  • I Have a Macbook Pro that does not have a disk drive.  How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased.  I registered the S/N and I can't find the Free download anywhere only trials.

    I Have a Macbook Pro that does not have a disk drive.  How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased.  I registered the S/N and I can't find the Free download anywhere only trials.

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • HT2452 My iMac was stolen the receipt doesn't have the serial number but I did register the computer when I purchased it how do I get the serial number

    My iMac was stolen the receipt doesn't have the serial number but I did register the computer so Aplle must have a record of it. How do I get it.

    Go to the Apple website and your support profile. It should list that iMac and the serial number for it. You'll need your Apple ID and password for that Apple ID.

  • I had no idea that I needed to use a CD to download my Adobe Photoshop Elements 12 onto my MAC and have already registered the product; how can I now download it? I have tried loping on the web and no luck! Please help me!

    I had no idea that I needed to use a CD to download my Adobe Photoshop Elements 12 onto my MAC desktop and have already registered the product; how can I now download it? I have tried looking on the web and no luck. Please help me!

    You don't need a CD to download anything; just download & install the trial from http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements, then activate it with your serial number.

  • I have registered the wrong email address how do I change it

    I Have registered the wrong email address when setting up my iTunes how do I change it

    You should be able to change the email address on the account by logging into the account via the 'manage your apple id' button on http://appleid.apple.com, via the Store > View Account menu option on a computer's iTunes, or by tapping on it in Settings > iTunes & App Store on your phone and logging in

Maybe you are looking for