How reliable is SAPupStat.log?

Hello World,
got the EHP5ERP6 -> EHP7ERP6 upgrade from hell going here, and step Preprocessing has been churning away for three days straight(!)
SAP is, as usual, of next to no help in figuring out reliable ETA estimates.
I want to know how reliable the time stats in SAPupStat.log are for predicting the ETA on this roaster.
We got mild swapping on OpSys level (~300MB), a ~600GB MaxDB DB and an 8CPU Server with 15GB RAM.
The hardware isn't too fascinatingly fast, but the claim of that SAPupStat.log file that it plans to keep on going like this for another three days (2014/08/12 11:56:36: 55.51% LEFT: 78:24:51 END: 2014/08/15 18:21:27) is just ludicrous.
I set MaxCPUs to 4 in the database and the cache buffers show 98%-99% hit ratio.
For the life of me I can't figure out why this thing is crawling like that, but this delay gets us close to meltdown "speed".
Anybody got any suggestions on this one?

Yup, its just finishing up step "Preprocessing" - after three days solid(!)
Its sooo frustrating not to be able to give the business a reliable estimate on the ETA.
Also, I am (desperately) trying to figure out when/where (Source or Shadow) CVERS and UVERs are updated, as the first test run bumped out in Post(!)processing, because three entries in CVERs didn't match up with UVERS.
SAP's genius tool SUM had simply "forgotten" to upgrade three basis components, I assume it was because of a faulty stack file, but SUM never complained about it, and since it wasn't my SolMan setup, I can only prove that indirectly (that old stack file lists EHP6 as a "replaced product", even so we started out with EHP5-ERP6).
WTF SUM didn't catch that at the beginning is beyond me, I simply trusted what MOPz had calculated and went for it (just got these systems handed over to me a few weeks ago).
In any case, I am trying to figure out if I am on the safe side now, or in for another bad surprise.
But I can't get a straight answer from SAP to that, and now it seems like I'll have to wait another three days(!) before I'll find out "the hard way", if that stack file was any better than the last one.
This is ridiculous, a whole week and SAP replies once a day to the help ticket I opened up about this.
We already had to postpone the Prod switchover, because everybody is now behind on testing :-(

Similar Messages

How to output java logging only to a log file except stderr?

I create a file logging and noticed that java logging output a log file and stderr simultanously. How to output the logging message only to the log file?
Thanks.

HarishDv wrote:
I dont have indesign installed on my system. I only have the binary , which needs modification and i have to save back to the DB as indd.
Can't be done, for a realistic assessment of "can". InDesigns documents cannot reliably be created or modified without InDesign itself. (*)
If you need to do this on native InDesign documents, you have to buy and install it.
* "Not true, there is always IDML". But that's not a 'binary'; and you cannot (**) "convert" a binary INDD to IDML and back again without InDesign.
** Again, for a remotely realistic value of "can".

HT201493 How can I add my daughter to Find my friends when we have the same itunes account and that's how they make us log in?

How can I add my daughter to Find my friends when we have the same itunes account and that's how they make us log in?

1) You asked "Does she need to reconnect to that itunes/computer and if so what do we need to do to remove this folder of pics from her ipod?" Yes, you have to connect the iPod to that computer and go to the Photos pane for the iPod in iTunes and uncheck sync photos and the click on synce/apply. In the future do not check sync photos.
iOS and iPod: Syncing photos using iTunes
2)
Create a NEW account for using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Then on the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into hers. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into hers. Make sure that under You can be reached at only her ID email address is listed
- Settings>iCloud and sign out and sign in with hers
Contnue to use the commpn ID/account for Settings>iTunes and App stores.

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How can i stay logged in on iPhone Skype after i delete the app from the 'current' apps?

How can i stay logged in on iPhone Skype after i delete the app from the 'current' apps?
Thanks for ur answers !

You are correct. There is no other way to recover this material, and yes it would have been a good idea to backup the iPhone prior to the restore. Remember that a restore to a previous date deletes everything on the device and puts it back to the state of things on the date you choose. The texts and contacts would be gone. Did you possibly sync the contacts with a supported application on the computer? That is the only other way to recover contacts. They are designed to be synced with a supported application on the computer, or with a cloud service such as iCloud, Google or Yahoo.

How to delete old logs in SAP BI, what is the best way to go?

Hi,
below are the issues we are facing,
when executing infopackage job is not getting triggred into source system.
for activation DSO data it is taking huge time. At the time of seqential read to RSREQDONE table.
I think this is due to huge logs in the staandard tables.
What could be the reson behind this.. and let me know how to delete old logs.
Thanks,
Harish

Hi,
just carry out RSRV for DSO PSA tables and see if there is inconsistency available there in the PSA table.
see if the change log and PSA deletion is happening regularly..else schedule same in PC
check with basis there are certain jobs which needs to run regularly at certain frequency..
http://www.erphowtos.com/guides-a-tutorials/doc_view/1041-how-to-delete-process-chain-logs-in-sap-bw.html
http://www.erphowtos.com/guides-a-tutorials/doc_view/1040-periodic-maintenance-activities-on-sap-bw-best-practices.html
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Thanks and regards
Kiran

How many people can log into a G5 at the same time.

Thanks in Advance.
I am using a G5 as a server with external drives attached. I get a message from time to time that says "too many users are logged in at once", is there a limit to how many people can log into a G5 at once ?
All are on different users, and it's a total gigabit network.
Message was edited by: apple2x3x5
Message was edited by: apple2x3x5

is there a limit to how many people can log into a G5 at once ?
Ten, unless you're using a version of Mac OS X Server which has no limit.
(38596)

How can i see Log information of Report Run Time?

Hi Gurus,
How can i see Log information of Report Run Time?, till now i am counted report run time manually. Is there any way i can see the workbook running time in log information?.
Thanks & Regards
Vikram

There could be a few things -
At one time, you needed to run a separate script to create the tables. I'm not sure that is still the case. If you check the Administrators guide, look into the chapter that deals with the EUL Status Workbooks.
If you are not logged on as the eul owner, you may not have select privileges, or you may need to qualify the table with the schema (if there is no synonym) - select * from <eul_owner>.EUL5_QPP_STATS;
If you are on 4i, the table is EUL4_QPP_STATS

How to get user logged in to ironport web

How to get user logged in to ironport web by their username, time connected and the IP address?

The onbox reporting can only show what web traffic is currently being surfed. We can provide a near-real time view of this web traffic with a "Web Tracking Report".
However, there is not a report available that depicts what you're describing. (This information is best contained on the domain server). The closes we could get with the WSA is displaying which credentials we are currently caching. (Which users we've seen since within the surrogate timeout). This is possible with the authcache command on the cli.
~Tim

How to write error log while creating invoice and avoid implicite commit

Hi,
I've have written code in exit RV60AFZZ in which I check for some possible errors while invoicing via VF01/VF04. If conditions are met then we create error message and display it to the user. As result we had a lot of missing SD invoices in FI when we did batch/mass invoicing. I've opened OSS note and SAP support team wrote that using statement MESSAGE is forbidden in UE. It can lead to implicite commits.
Do you have some example how to write error log for invoincing in VF01/VF04 transactions?
Thanks

@ sri nath. Please read post before answering. I wouldn't be posting trivial questions. As I wrote before it doesn't work. Also SAP support would not answer to the question in my OSS.
In VOFM, SAP is using routine VBFS_HINZUFUEGEN_ALLG to write to error log.
Mine is something like this in ue:
      PERFORM ZVBFS_HINZUFUEGEN_ALLG
                 USING VBAP-VBELN VBAP-POSNR 'ZSD' 'E '600'
                       SPACE SPACE SPACE SPACE.
(we have custom message class)
As result XVBFS and VBSK are filled with error, but posting is also done. Error log is filled but invoice is created and posted in FI.
That is not OK.
thanks

How many users have logged in the Enterprise portal

Hello Expert,
Please suggest..
Feature required to monitor as how many users have logged in the Enterprise portal 7.0(Portal is Implemented with MDM), so that utilization can be known.
Regards,
Vidhanshi

Hi,
You can wirte the following code to get the logged in user's ID
try {
      IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
      IUser sapUser = wdClientUser.getSAPUser();
      IUserAccount[] acct = sapUser.getUserAccounts();
      String str = acct[0].getDisplayName();
      wdComponentAPI.getMessageManager().reportSuccess("user "+ str);
     } catch (WDUMException e) {
     // TODO Auto-generated catch block
     e.printStackTrace();
     } catch (UMException e) {
     // TODO Auto-generated catch block
     e.printStackTrace();
You need security api for using it make sure that is present.
[Find out who is login into the Portal|http://forums.sdn.sap.com/thread.jspa?threadID=1723807]
Hope This is Help full for you!!!
Best Regards
Vijay K

How to create the log file in remote system using log4j.

Hi,
How to create the log file in remote system using log4j. please give me a sample code or related links.The below example i used for create the log file in remote system but it return the below exception.Is there any authandication parameter for accessing the remote path? Please help.
public class Logging
Logger log=null;
FileAppender fileapp=null;
public Logging(String classname)
try
log = Logger.getLogger(classname);
String path=" [\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt|file://\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt]";
fileapp = new FileAppender(new PatternLayout("%r [%t] %-5p %c %x - %m%n"),path, true);
log.addAppender(fileapp);
log.info("Logger initilized");
}catch(Exception ex)
ex.printStackTrace();
java.io.FileNotFoundException: \\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt (The network path was not found)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(Unknown Source)
at java.io.FileOutputStream.<init>(Unknown Source)
at org.apache.log4j.FileAppender.setFile(FileAppender.java:290)
at org.apache.log4j.FileAppender.<init>(FileAppender.java:109)
at annwyn.logger.BioCapLogger.<init>(Logging.java:23)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Please help.
Thanks in advance.
Saravanan.K

Sorry path is missing for the above request.
path="\\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt ";
please help.
Saravanan.K

How to get real time information about how many user are logged in and thei

I use tomcat as my server platform in Ubuntu for a war file.
I know in order to get real time information about how many user are logged in, we can count how many active sessions exist by a SessionCounter code. However, I have to permit HttpSessionListener in web.xml of tomcat. From other users' experiences, the configuration is complexed and has some errors.
Here's the link:http://www.stardeveloper.com/article...1112001&page=1
In order to get users' ip, in jsp, use request.getremotehost() or
request.getremoteaddress() by editing the jsp file.
I wonder if there's some open source software to use for these two purposes.
Thank you!

That url is missing a few bits. The ... in the middle doesn't help.
we can count how many active sessions exist by a SessionCounter code.
However, I have to permit HttpSessionListener in web.xml of tomcat.
From other users' experiences, the configuration is complexed and has some errors.And have you tried it? The configuration isn't that complex.
What errors do you mean? Errors in tracking people, variance in the count? Probably related to internet issues and nothing you can do will alleviate them.

How to read Update log/RFC Log IN SMSY programatically ?

Hi all,
In SMSY we have option to look at <b>update log/RFC Log</b> which shows the connection status for each RFC connection. there are cases where the connection has failed and we get logs as shown below
Start of automatic data capture with source 'RFC_CALL'
Start of data capture for system 'A1D'
Get clients for system 'A1D'
Clients for system 'A1D' found in RFC destination 'SM_A1DCLNT010_READ'
Get software components for system 'A1D'
Software components for system 'A1D' found in RFC destination 'SM_A1DCLNT010_READ'
Determine the installed Support Packs for the system 'A1D'
Support Packs for system 'A1D' determined by RFC destination 'SM_A1DCLNT010_READ'
Get clients for system 'A1D'
Clients for system 'A1D' found in RFC destination 'SM_A1DCLNT010_READ'
Get server and instances for system 'A1D'
Server for system 'A1D' found in RFC destination 'SM_A1DCLNT010_READ'
Start of data capture for system 'AAE'
Get clients for system 'AAE'
Clients for system 'AAE' found in RFC destination 'SM_AAECLNT010_READ'
Get software components for system 'AAE'
Software components for system 'AAE' found in RFC destination 'SM_AAECLNT010_READ'
Determine the installed Support Packs for the system 'AAE'
Support Packs for system 'AAE' determined by RFC destination 'SM_AAECLNT010_READ'
my question is:
1) what does these logs signify
2) how to read these logs in program and based on what selection
need ur inputs on this....
Best regards,
Subba

FOUND...

How to download the log history for batch session?

Anyone know how to download the log history from SM35?

Hi ONG ,
first u have to get the Q.ID , then u can use there Fms to get the Log of Sessions.
CALL FUNCTION 'RSTS_OPEN_RLC'
EXPORTING
    NAME         = LOG_NAME
    CLIENT       = LOG_CLIENT
    AUTHORITY    = 'BATCH'
    PROM         = 'I'
    RECTYP       = 'VNL    '
EXCEPTIONS
    FB_CALL_HANDLE = 4
    FB_ERROR       = 8
    FB_RSTS_NOCONV = 12
    FB_RSTS_OTHER = 16
    NO_OBJECT      = 20
    OTHERS         = 24.
CALL FUNCTION 'RSTS_READ'
TABLES
    DATATAB = LOG_TABLE
EXCEPTIONS
    FB_CALL_HANDLE = 4
    FB_ERROR       = 8
    FB_RSTS_NOCONV = 12
    FB_RSTS_OTHER = 16
    OTHERS         = 16.
CALL FUNCTION 'RSTS_CLOSE'
EXCEPTIONS
    OTHERS = 4.
<b>check the same steps how sap doing in SM35P</b>
Regards
Prabhu
Message was edited by: Prabhu Peram

How reliable is SAPupStat.log?

Similar Messages

Maybe you are looking for