How requirements from SOP are transferred to Demand Management

How requirements from SOP are transferred to Demand Management? what is transaction code for it ?
Madan S. Rode

Hi,
In mc82 view, after checking the capacity situation(By choosing view, capacity situation, show) you can check the load for that particular resource. Once the load is 100 %. You can save it.
Use mc78, copy the inactive version no to active no. (a00).
Then in mc82 view, go to Extras,
transfer to demand management,
Choose the strategy as LSF/VSF... according to your scenario & then click transfer.
Regards,
Senthilkumar SD

Similar Messages

How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

Dear Experts:
could you please share with me the knowledge for below topic:
How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
Is this SAP standard function OR there need an enhancement to do that?
I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
Best regards,
Andy

Hi, Gopi,
Glad to see your feedback, but i still have question on your feedback:
which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
Below is the example and another question:
what the relationship between the pricing procedures at service PO item level and service line item level?
1. The freight cost in shipment cost document—including used condition type and pricing procedure
The pricing procedure of shipment cost document
2. The freight cost in service entry sheet—including used condition type and pricing procedure
The pricing procedure of service entry sheet--the pricing procedure at service line item level
3. The freight cost in service PO item—including used condition type and pricing procedure:

SOP - Flexible Planning u2013 Demand Management.

Hello Gurus
Can any one guide me SOP - Long term plannng / Flexible Planning - Transfer to demand managment Process
Thanks
JJ
Edited by: JJ_SAP_S on Jul 28, 2008 12:24 AM

Hi,
Transferring SOP to Demand Management :
Use:
You can pass on data planned in Flexible Planning or Standard SOP to Demand Management.
Demand Management determines the requirement dates and requirement quantities for important assemblies and specifies the strategies for planning and producing/procuring finished products. The result of Demand Management is the demand program. The demand program differentiates planned independent requirements and customer independent requirements. It gives the information needed in MPS and MRP for planning at SKU level. The placing of sales orders eventually consumes planned requirements and triggers updating to the Sales Information System. This actual data can then be used as input for future sales planning. For more information, see PP Demand Management.
Prerequisites:
The system distributes the data to the appropriate plants in Demand Management on the basis of the quotas you set in Customizing (in Define proportional distribution across plants). You can also make these settings in the Flexible Planning or Standard SOP menu by choosing Settings ® Plant distribution. Plant distribution works as follows:
If a plant or plants can be found for the material in the planning hierarchy, data is transferred to Demand Management for these plants.
If no plant can be found in the planning hierarchy, the system checks to see which plants have been maintained for the material in the material master record. It then checks to see whether distribution quotas have been maintained for the material. If quotas have been maintained, the transfer to Demand Management is based on these quotas.
If no distribution quotas are found for the material, the system checks to see whether you have set generic distribution quotas; that is, distribution quotas that apply to all materials. If so, the transfer to Demand Management is based on these quotas. If generic quotas exist for some but not all plants maintained in the material master record, the system assumes that the distribution quotas of plants without generic quotas are 0.
If no distribution quotas are found at allu2014neither material-specific nor generic onesu2014, the system splits the data equally among all the plants in the material master record.
See also:
Plant Distribution Quotas
Features
Independent requirements are created in Demand Management for all materials whose data has been transferred. These independent requirements are created in the base unit of measure of the material. The base unit of measure of the material is not necessarily the same as the base unit of measure of the information structure or the unit in which you planned the material. See also Switching Units in the Planning Table.
You can transfer SOP data to Demand Management in the following ways:
Transferring Online, Synchronously and Automatically:
You set the following information structure parameters in Customizing for Sales & Operations Planning (in Set parameters of info structures and key figures).
Field name of the key figure whose values are to be transferred
Planning version from which the data is to be transferred
Demand version to which the data is to be transferred
The system creates or overwrites independent requirements in Demand Management every time you save this planning version of the information structure in Flexible Planning.
Transferring Online, Asynchronously and Manually
You choose between the following options:
Transfer of the planning data of all members of a single-level product group from standard SOP (a single-level product group is a product group whose members are materials)
Transfer of the planning data created for one material from standard SOP
Transfer of key figure values from an information structure
You make the following general settings:
The material or product group whose data you want to be transferred
The plant of this material or product group
The planning version of the information structure in which the data is stored
The dates for which you want the data to be transferred
Whether you want to check what the data looks like as independent requirements before you transfer it
The requirements type
If you do not make an entry, the system sets the requirements type via the MRP group which is maintained in the material master record.
The version of the demand program to which you want the data to be transferred
Whether this version of the demand program is active and therefore relevant to MRP
Depending on the option you chose in step 1, you set one of the following strategies.
Transferring Planning Data from a Single-Level Product Group:
You transfer the sales plans of the materials direct.
You transfer the sales plans of the materials as proportions of their owner product group (using the proportional factors defined in the product group master record).
You transfer the production plans of the materials direct.
You transfer the production plans of the materials as proportions of their owner product group (using the proportional factors defined in the product group master record).
Transferring Planning Data of One Material from Standard SOP:
You transfer the sales plan of the material direct
You transfer the sales plan of the material as a proportion of the product group of which it is a member (using the proportional factor defined in the product group master record)
You transfer the production plan of the material direct
You transfer the production plan of the material as a proportion of the product group of which it is a member (using the proportional factor defined in the product group master record)
Transferring Key Figure Data of One Material from Flexible Planning
The information structure from which you want the key figure data to be transferred
The key figure whose values you want to be transferred
This key figure must be a quantity key figure.
For more details go to the following link :
http://help.sap.com/erp2005_ehp_03/helpdata/EN/a5/63238b43a211d189410000e829fbbd/frameset.htm
Hope this helps.
Reward if useful.
Regards,
Tejas
Hope this helps.

SOP and transfer to Demand management for MTO material

Hi all,
I have the following situation:
I have a material, a finished goods product with planning strategy 20 Make to order defined in the material master. I enter a sales forecast for the material in SOP in SAPECC (transaction MC87), works fine.
But when I try to release the forecast to Demand Management (MC74), I get the following error message: "No requirements type exists for material 110100 1 in plant 2". I can see that planning strategy 20 MTO does not have any requirement type defined.
But what is the best practice then to forecast on MTO materials (with strategy 20 MTO)?
What I want to do is to bring down the requirements of the MTO material to Long term planning to get a BOM explosion for the components. I realize that I should not start a production plan for the MTO material, but I want to plan the requirements for components several months ahead.
What is the best practice? Should I use a different production strategy? Am I missing config or any fundamental thinking here?
I need to have the material as a MTO strategy, but I want to plan the components.
Please, give me input on this if you have any solution.
Regards,
Lars

Hi Lars,
Here's what you need to do:
1. Instead of pure 20, customize a strategy group that has in it 20 and 10, and attach this strategy group to your material.
2. In MC74 specify requirements type LSF, demand management version, and make sure to uncheck the "active" box (otherwise you will get requirements in the operative system, and not only in LTP).
3. Do the transfer, and include the version in a LTP scenario.
Regards,
Mario

Sop to demand management

Dear friends,
In SOP Single level product group value can be transferred to demand management (mc81 - extras - transfer to demand management). But for multi level product group - how to transfer to demand management from SOP?
regards
v.senthilkumar

Hi,
This is not possible, since in SOP, values for only the lowest level in a product group, can be transferred to demand management. In case of sinlge level product group, automatically you have the lowest level, which you are transferring (basically the material). But, in case of multi-level, there are PGs below PG.
So, you first need to disaggregate your requirements from a higher level product group to a lower level one. You need to disaggregate to the lowest level (the material) in the hierarchy.
Use transaction MC76 for the same. After that you would be able to transfer the requirements to demand management.
Revert in case of any problems.
Rgds,
Shrenik

Pass on Material requirements to MRP areas within Plant

- We are on ECC 6.0 & have a scenario wherein material requirements from depots are passed on to respective plants according to the settings defined in the Special Procurement key in the Material Master (MRP View)
- The requirement from depots are passed on to the manufacturing plant & further down to the Plant in which MRP areas are defined, in the form of Planned Orders, if the stock is not sufficient at depot.
- For Subcontracting, we have various MRP areas within a single separate plant. The requirement is that PR that is generated for STO should be able to pass the requirement to an MRP area (after stock checking at MRP area level), (system to decide the MRP area to be selected for passing on the requirements).
- Currently the system is passing the requirements & checking the stock at plant level only.
- Stock determination rules donu2019t seem to work here.
- The opening up of the u2018Issue storage locationu2019 in STOu2019s by config: (u201CPurchase order-> - Set up Stock Transport order - > Set up Stock Transfer between storage locationsu201D) is yet to be tested.
- But in that case, only a single MRP area is defined for the material & therefore the requirements may flow directly to that particular MRP area. In case of Multiple MRP areas being defined for a single material, how can we ensure that the system determines a stock checking at one particular MRP area & pass on the requirements to it.
Seeking guidance as to how this issue can be resolved.
Precisely,
REQ.FRM>FLOW TO>AS (MRP element)
Depot>Plant 1>Planned order (PlOrd)
Plant 1>Plant 2>Material reservation (MtlRes)
Plant 2>MRP area of Plant 2>Transfer reservation (TrnRes)

dear colleague,
Please check the following info that can be useful:
1) Note 358936 is relevant for MRP areas of type storage location and
   not for Subcontractor MRP areas (which you would be knowing).
2) Secondly this note was created as an advance development and not
   for any particular customer problem. It was also feasible to
   develop this functionality with a small change.
3) The feature of procurement with Schedule lines for components
   in subcontractor MRP areas is not available in the standard SAP
   suite and there are no plans to develop this in the near future.
   This feature would be an advance development.
best regards

Sales Planning vs Demand management

Can any body explain how to process the sales planning vs Demand management !

Hi,
Demand Management : The function of Demand Management is to determine requirement quantities and delivery dates for finished products assemblies. Customer requirements are created in sales order management. To create a demand program, Demand Management uses planned independent requirements and customer requirements.
To create the demand program, you must define the planning strategy for a product. Planning strategies represent the methods of production for planning and manufacturing or procuring a product.
Using these strategies, you can decide if production is triggered by sales orders (make-to-order production), or if it is not triggered by sales orders (make-to-stock production).You can have sales orders and stock orders in the demand program. If the production time is long in relation to the standard market delivery time, you can produce the product or certain assemblies before there are sales orders. In this case, sales quantities are planned, for example, with the aid of a sales forecast.
Sales & Operations Planning (SOP) is a flexible forecasting and planning tool with which sales, production, and other supply chain targets can be set on the basis of historical, existing, and estimated future data. Rough-cut planning can also be carried out to determine the amounts of the capacities and other resources required to meet these targets.
Use SOP to streamline and consolidate your companys sales and production operations.
SOP is particularly suitable for long- and medium-term planning
SOP constitutes the planning functionality of the LIS information systems.
You pass on SOP plans to Demand Management (PP-MP-DEM) in the form of independent requirements. In turn, this data is fed to Master Production Scheduling (PP-MP-MPS) and Material Requirements Planning (PP-MRP).
An interface with Profitability Analysis (CO-PA) allows you to use CO-PA data as the basis for sales planning in SOP.
You can also pass on the results of SOP to Profitability Analysis (CO-PA), Cost Center Accounting (CO-OM-CCA), and Activity-Based Costing (CO-OM-CCA).
Application Link Enabling (CA-BFA-ALE) supports the distribution of data to different operating units in your enterprise
I hope this information will help you.
kiran.

DEMAND MANAGEMENT STANDARD CONFIGURATION

Hi Gurus
pl share the Demand Management standard configuration to be done
Plants are available and copied from 0001
thanks
K.Prabakaran

Hi
Demand Management does not need any extra configuration unless u want to make any changes to the standard configuration. You have to choose the right strategy to be used for your process and apply the same to the material in the MRP3 view of the material master.
Availability check also has to be selected according to the requirement.
If you can specify your requirements, I can help u further in selecting the paramenters.
Regards
Chandra

HT4413 When migrating from time machine to my new hard drive, only some files and applications and setting are transferred, not all of them. In my latest back up I have them all. How can I fix that?

When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.

sohs wrote:
When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.
If you want to use Time Machine to recover the contents of one of its a backups to a new drive, follow the instructions in Mac OS X 10.6: Recovering your entire system. Note that you must select the "Restore System From Backup" option from the Utilities menu of the Installer disc to do this.
Also note that if you are transferring files to a hard drive to be used with a different computer, you should use Migration Assistant instead. This intentionally will not copy everything because some settings, applications, etc. are not compatible computer-to-computer. Migration Assistant will copy everything that is.

Tranfser from demand management to SOP

Hello All,
is it possible to send data from demand management (eg.MD61) to SOP - standard information structure S076 or flexible planning ?
The idea is to put values directly to MD61 and use them later in flexible planning
thanks a lot
KS

Dear,
It is not possible. In sap, the planning cycle will be SOP -> Demand management -> MRP
SOPu2019 is a forecasting tool enabling you to set up sales, production, and other supply chain targets based on existing, future, or historical data. SOP is most suitable for planning finished goods. SOP plans are passed on to Demand Management in the form of independent requirements (MD61), which in turn is fed in to MRP (Material Requirements Planning).
Hope it clear your doubt
Regards / US

I have 10.6.8 and am just installing logic pro 9. I am downloading the extra 20gig of material. I am installing Logic on my laptop as well and dont want to download the extra 20 gig again. How do i go about transferring it from the computer to the laptop?

Hi
I am using OS 10.6.8 and just installing logic pro 9. I am downloading the extra 20gig of material - the additional content packages. I am installing Logic on my laptop as well and dont want to download the extra 20 gig again. How do i go about transferring it from the computer to the laptop?
Thanks

And now a second newbie question. I have downloaded the additional content and booted up logic for the first time, but the apple loops have not installed and logic is asking me to reinstall the apple loops. But how do I do that? I can see they are in the libray so have downloaded.
Thanks

How do I go about transferring files from Dreamweaver CS4 to Dreamweaver CC?

How do I go about transferring
files from Dreamweaver CS4 to Dreamweaver CC?

If both versions are on the same hard drive, simply tell DW CC where your site files are located on your hard drive. Go to Site > New Site and define your site.
Nancy O.

Discoverer Report: How to find Business Area name from Report Name.

Hi
I opened a report in Disco Desktop 4 -> Resonsibiolity --> Report Name.
So I know Report name but don’t know which Business Area it belongs to.
How to find Business Area Name from Report Name?
Cheers
Vijay

Hi,
There is no relationship between reports and business areas. Each report can be built from many folders. Each folder can be in many business areas.
However you can try the following SQL which may give you the result you want for an v5 EUL. You will have to modify for Discoverer 4 EUL:
select distinct doc_name, obj.obj_name folder_name, bas.ba_name
from eul_us.eul5_documents doc
, eul_us.eul5_elem_xrefs xref
, eul_us.eul5_expressions exp
, eul_us.eul5_objs obj
, eul_us.eul5_ba_obj_links bol
, eul_us.eul5_bas bas
where xref.ex_from_id = doc.doc_id
and doc.doc_name = &your_report
and xref.ex_to_id = exp.exp_id
and obj.obj_id = exp.it_obj_id
and bol.bol_obj_id = obj.obj_id
and bas.ba_id = bol.bol_ba_id
Rod West

How do I add a space to the toolbar in Firefox 29.0? I can grab a space from empty areas and move it around, but where do I find a "space" icon to ADD a space?

It has been useful in past versions of Firefox to be able to add (a) space(s) between icons on the toolbar in order to create groups of icons and/or separate icons by class or function. In Firefox 29.0, I discovered how to "grab" (click and drag) a space from open areas on the toolbar and move it to another part of the toolbar. But how can I add spaces to the toolbar? In past versions, there used to be a space icon in the customize menu set that could be dragged to the toolbar for that purpose.

You can get around this problem by installing the "Classic Theme Restorer Add-on" available at: https://support.mozilla.org/en-US/kb/how-to-make-new-firefox-look-like-old-firefox
While returning the squared-off look to your tabs, instead of the newer, rounded version - it also gives returns the option to add spaces; variable size spaces, and separators to your tool-bars.

I just got a new computer, restored my music from the old computer...how do i get my transferred music into itunes?

i just got a new computer, restored my music from the old computer...how do i get my transferred music into itunes?

Hi,
See this link.
http://support.apple.com/kb/ht1449
Jim

How requirements from SOP are transferred to Demand Management

Similar Messages

Maybe you are looking for