How restore database only with dbf, ctl, and redolog file

Hi friends,
I had a database oracle 11g, but the server was crashed. Then I just rescue only the files DBF, CTL, and REDOLOG. But I couldn't rescue the spfile and pwd file.
How can I restore this database in other server? How can I recreate the spfile?
I hope anyone can give me a hand.
Thanks.

Thanks Hemant K Chitale.
And exactly like EdStevens said, I don't have any spfile or init file, also I don't have the alertlog. I just have the files:
CONTROL01.CTL
CONTROL02.CTL
CONTROL03.CTL
REDO01.LOG
REDO02.LOG
REDO03.LOG
SYSAUX01.DBF
SYSTEM01.DBF
TEMP01.DBF
UNDOTBS01.DBF
USERS01.DBF
And I just know the original database was in 10g standar edition on Windows server 2008.
Which will be the steps to recover the database, how I could create a spfile from the control files, redo, and dbf?
Best regards.

Similar Messages

How to view folders with folders first and then files?

I come from a Windows world but am loving the Mac world! But one thing I haven't been able to figure out is how to view folders with all the folders first and then the files? Right now, it sorts everything in alphabetical order, intermixing the folders and files. I like being able to see the folders sorted at the top and then the files. Is there a way to do this?

If you want a more advanced browser, Pathfinder generally comes highly recommended.
I'm not aware of a way to make folders sort on top. I generally detest that feature in Windows, because it messes up keyboard navigation. Both operating systems support jumping to a file by starting to type a name, but on Windows you don't know where you end up. If I have a file called "notes", I know that typing "N" will send me somewhere very close to the file, and a few arrow presses brings me to it - if I do it on a Mac. If I do it on Windows, it depends on what is selected - if it's a folder or nothing, I jump to the first folder beginning with N, but if it's a file, I jump to the first file beginning with N - in a completely different part of the list. I do use folder grouping in some windows on the Mac, though, by adding a space to the name. Ideally, it should be a per-window setting.

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

How to invoke JSF With Standard Urls and parameters

Hi,
Could some one please help me how to invoke JSF with standard Urls and parameters?
My requirement is:
http://localhost:8080/myapp/faces/jsf_page.jsp?trackerID=11&viewPage="products"
then i want to save the tracker details into database and redirect the user to "products" page.
Would some one suggest me where can i get some example?

Hi BalusC,
It didn't solve my proble.....Your solutions are fantastic for most of the issues. But mine problem is unclear where JSF page tags.
If possible, Could you please provide me how to invoke the method from JSF page....
same code works if the user click on command button but my requirement is as soon as the user click on the link from 3rd party website, then he need to come to our web application and invoke the JSF page along with ManagedBean for saving details and redirect to disganted webpage.
I will provide the following link to 3rd party websites. the URL is :: http://somedomain.com/myApp/Tracker.JSF?trackerID=111
Could you please provide me the code i need to write in JSF ....just for invoking ManagedBean class...? how i code for page on load call the managedBean for specific method?

How to link asset with purchase order and PO Item.

Hello,
I have to generate a report which contains columns
Asset No , po no(ebeln) ,PO Item(ebelp),Material no etc
My query is how to link asset with purchase order and PO Item.
I am selecting asset and po no. from anla but how to get
po item no(ebelp)?
po line item is important in this report because every line item has differrent asset and material no.
i tried to match asset no in mseg table but i am not getting asset no in mseg .
how should i proceed ?

Thanks Thomas & Srimanta for the quick response.
When I checked EKKN table by entering PO there is no asset no. in anln1 field.
Also I would like to add that, In me23n for a PO, account assignment category we are entering 'F' for internal order settlement.
Where can i find the link between asset and po no(ebeln) and po item(ebelp)?
Regards,
Rachel
Edited by: Rachel on Aug 11, 2008 7:23 AM

Trying to change ownership of my old iPod. The advice here is to go to "Devices" "Summary" "Restore", but I find "Devices" does not offer "Restore" but only "Sync", "Transfer", "Backup", and a greyed "Restore from backup."

Trying to change ownership of my old iPod. The advice here is to go to "Devices">"Summary">"Restore", but I find "Devices" does not offer "Restore" but only "Sync", "Transfer", "Backup", and a greyed "Restore from backup."

What I don't understand is that your iTunes looks different from mine--just a little bit. You have 3 circles, red, yellow, and green, in the upper right end of the top bar. INstead I have a square that is half gray. When I click it, I get a menu very similar to the menu under "File."
The only place I see an entry for "Devices" is under "File," but it only gives the 4 options I mentioned before (see below). There is no "Summary."
Here's another screen shot after I added an album to music. Now all the choices under "Devices" are grayed.

I have problems with restore in Itunes with eror 1418 and i cant put the song in my shuffle ..

I have problems with restore in Itunes with eror 1418 and i cant put the song in my shuffle ..

http://support.apple.com/kb/TS1372

Yosemite finder crashes with previewig .txt and other files

Hello,
under Yosemite the Finder crashes with previewig .txt and other files.
Is this just my problem? Help please.
Thank you very much.
Regards.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

How can I recover my purchased books and PDF files in my library?

How can I recover my purchased books and PDF files in my library?

you can re-download all purchases from the iBooks store at any time. PDF's you will need to have kept the PDF on your hard drive or on a service such as Dropbox, then you can re-import them into iTunes.

How do I get my home movies and avi files to play on my ipad 3?

How do I get my home movies and avi files to play on my ipad 3?

1) Download a third party player on the iPad, such as avplayerhd or cinexplayer. Search app store for AVI and read some reviews.
2) Convert the files in a program such as handbrake, mpegstreamclip on the pc and import them.
3) Download air video from the app store, install the server software on the pc and stream away.
Take your pick.

How restore database with duplicate command where backuppiece moved

hello
i have 2 hosts
on the host 1 my production database and on host2 my developlment database
i would like to duplicate the first one on the host2 i have created an auxiliary database
all seems ok expect 1 not small problem :
on host1 my backuppiece are in F:\oracle\backup_%d_%u
and i don't have a F drive on my host2 i have copy all the rman backup in : e:\oracle\backup
but i don't find how tell to rman to take my backuppiece in E: and not in F:
this is my result of my rman script :
RMAN> run {
2> set newname for datafile 1 to 'e:\oracle\oradata\dpbsdev2\SYSTEM01.DBF' ;
3> set newname for datafile 2 to 'e:\oracle\oradata\dpbsdev2\UNDOTBS01.DBF' ;
4> set newname for datafile 3 to 'e:\oracle\oradata\dpbsdev2\SYSAUX01.DBF' ;
5> set newname for datafile 4 to 'e:\oracle\oradata\dpbsdev2\USERS01.DBF' ;
6> set newname for datafile 5 to 'e:\oracle\oradata\dpbsdev2\CIF.ORA' ;
7> set newname for datafile 6 to 'e:\oracle\oradata\dpbsdev2\DEVELOPMENT.ORA' ;
8> set newname for datafile 7 to 'e:\oracle\oradata\dpbsdev2\COMPLIANCE.ORA' ;
9> set newname for datafile 8 to 'e:\oracle\oradata\dpbsdev2\COMPLIANCE_EOM.ORA'
10> set newname for datafile 9 to 'e:\oracle\oradata\dpbsdev2\CWMLITE.ORA' ;
11> set newname for datafile 10 to 'e:\oracle\oradata\dpbsdev2\DADIC.ORA' ;
12> set newname for datafile 12 to 'e:\oracle\oradata\dpbsdev2\DRSYS.ORA' ;
13> set newname for datafile 13 to 'e:\oracle\oradata\dpbsdev2\DUW_LAN_ENCRYPT.O
14> set newname for datafile 14 to 'e:\oracle\oradata\dpbsdev2\ERASE.ORA' ;
15> set newname for datafile 15 to 'e:\oracle\oradata\dpbsdev2\EXPRIM.ORA' ;
16> set newname for datafile 16 to 'e:\oracle\oradata\dpbsdev2\EXPRIM_EOM.ORA' ;
17> set newname for datafile 17 to 'e:\oracle\oradata\dpbsdev2\EXPRIM_EOY.ORA' ;
18> set newname for datafile 18 to 'e:\oracle\oradata\dpbsdev2\IDX_COMMON.ORA' ;
19> set newname for datafile 19 to 'e:\oracle\oradata\dpbsdev2\IDX_DWH.ORA' ;
20> set newname for datafile 20 to 'e:\oracle\oradata\dpbsdev2\IDX_EXPRIM.ORA' ;
21> set newname for datafile 21 to 'e:\oracle\oradata\dpbsdev2\IDX_IMPORT.ORA' ;
22> set newname for datafile 22 to 'e:\oracle\oradata\dpbsdev2\IDX_SPECIAL.ORA'
23> set newname for datafile 23 to 'e:\oracle\oradata\dpbsdev2\IDX_WINDEKIS.ORA'
24> set newname for datafile 24 to 'e:\oracle\oradata\dpbsdev2\IMPORT.ORA' ;
25> set newname for datafile 25 to 'e:\oracle\oradata\dpbsdev2\IMPORT_EOM.ORA' ;
26> set newname for datafile 26 to 'e:\oracle\oradata\dpbsdev2\IMPORT_EOY.ORA' ;
27> set newname for datafile 27 to 'e:\oracle\oradata\dpbsdev2\INDX.ORA' ;
28> set newname for datafile 28 to 'e:\oracle\oradata\dpbsdev2\ODM.ORA' ;
29> set newname for datafile 29 to 'e:\oracle\oradata\dpbsdev2\OMS_REPOSITORY.OR
30> set newname for datafile 31 to 'e:\oracle\oradata\dpbsdev2\OWB_REPOSITORY.OR
31> set newname for datafile 32 to 'e:\oracle\oradata\dpbsdev2\OWB_REPOSITORY_ID
32> set newname for datafile 34 to 'e:\oracle\oradata\dpbsdev2\SECURITY.ORA' ;
33> set newname for datafile 35 to 'e:\oracle\oradata\dpbsdev2\SIMS.ORA' ;
34> set newname for datafile 36 to 'e:\oracle\oradata\dpbsdev2\TOOLS.ORA' ;
35> set newname for datafile 37 to 'e:\oracle\oradata\dpbsdev2\TRANSTAT.ORA' ;
36> set newname for datafile 38 to 'e:\oracle\oradata\dpbsdev2\UTILS.ORA' ;
37> set newname for datafile 39 to 'e:\oracle\oradata\dpbsdev2\WINDEKIS.ORA' ;
38> set newname for datafile 40 to 'e:\oracle\oradata\dpbsdev2\WINDEKIS_EOM.ORA'
39> set newname for datafile 41 to 'e:\oracle\oradata\dpbsdev2\WINDEKIS_EOY.ORA'
40> set newname for datafile 42 to 'e:\oracle\oradata\dpbsdev2\XDB.ORA' ;
41> set newname for datafile 43 to 'e:\oracle\oradata\dpbsdev2\CHANGE_MGT_PACK.D
42> set newname for datafile 44 to 'e:\oracle\oradata\dpbsdev2\DWH.ORA' ;
43> set newname for datafile 46 to 'e:\oracle\oradata\dpbsdev2\DEXIA_JOBS.ORA' ;
44> duplicate target database to DPBSDEV2
45> logfile
46> group 1 ('E:\oracle\oradata\dpbsdev2\redo01.log' ) size 500M ,
47> group 2 ('E:\oracle\oradata\dpbsdev2\redo02.log' ) size 500M ,
48> group 3 ('E:\oracle\oradata\dpbsdev2\redo03.log' ) size 500M ;
49> }
executing command: SET NEWNAME
using target database control file instead of recovery catalog
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting Duplicate Db at 06-FEB-08
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=157 devtype=DISK
contents of Memory Script:
set until scn 2519944319;
set newname for datafile 1 to
"E:\ORACLE\ORADATA\DPBSDEV2\SYSTEM01.DBF";
set newname for datafile 2 to
"E:\ORACLE\ORADATA\DPBSDEV2\UNDOTBS01.DBF";
set newname for datafile 3 to
"E:\ORACLE\ORADATA\DPBSDEV2\SYSAUX01.DBF";
set newname for datafile 4 to
"E:\ORACLE\ORADATA\DPBSDEV2\USERS01.DBF";
set newname for datafile 5 to
"E:\ORACLE\ORADATA\DPBSDEV2\CIF.ORA";
set newname for datafile 6 to
"E:\ORACLE\ORADATA\DPBSDEV2\DEVELOPMENT.ORA";
set newname for datafile 7 to
"E:\ORACLE\ORADATA\DPBSDEV2\COMPLIANCE.ORA";
set newname for datafile 8 to
"E:\ORACLE\ORADATA\DPBSDEV2\COMPLIANCE_EOM.ORA";
set newname for datafile 9 to
"E:\ORACLE\ORADATA\DPBSDEV2\CWMLITE.ORA";
set newname for datafile 10 to
"E:\ORACLE\ORADATA\DPBSDEV2\DADIC.ORA";
set newname for datafile 12 to
"E:\ORACLE\ORADATA\DPBSDEV2\DRSYS.ORA";
set newname for datafile 13 to
"E:\ORACLE\ORADATA\DPBSDEV2\DUW_LAN_ENCRYPT.ORA";
set newname for datafile 14 to
"E:\ORACLE\ORADATA\DPBSDEV2\ERASE.ORA";
set newname for datafile 15 to
"E:\ORACLE\ORADATA\DPBSDEV2\EXPRIM.ORA";
set newname for datafile 16 to
"E:\ORACLE\ORADATA\DPBSDEV2\EXPRIM_EOM.ORA";
set newname for datafile 17 to
"E:\ORACLE\ORADATA\DPBSDEV2\EXPRIM_EOY.ORA";
set newname for datafile 18 to
"E:\ORACLE\ORADATA\DPBSDEV2\IDX_COMMON.ORA";
set newname for datafile 19 to
"E:\ORACLE\ORADATA\DPBSDEV2\IDX_DWH.ORA";
set newname for datafile 20 to
"E:\ORACLE\ORADATA\DPBSDEV2\IDX_EXPRIM.ORA";
set newname for datafile 21 to
"E:\ORACLE\ORADATA\DPBSDEV2\IDX_IMPORT.ORA";
set newname for datafile 22 to
"E:\ORACLE\ORADATA\DPBSDEV2\IDX_SPECIAL.ORA";
set newname for datafile 23 to
"E:\ORACLE\ORADATA\DPBSDEV2\IDX_WINDEKIS.ORA";
set newname for datafile 24 to
"E:\ORACLE\ORADATA\DPBSDEV2\IMPORT.ORA";
set newname for datafile 25 to
"E:\ORACLE\ORADATA\DPBSDEV2\IMPORT_EOM.ORA";
set newname for datafile 26 to
"E:\ORACLE\ORADATA\DPBSDEV2\IMPORT_EOY.ORA";
set newname for datafile 27 to
"E:\ORACLE\ORADATA\DPBSDEV2\INDX.ORA";
set newname for datafile 28 to
"E:\ORACLE\ORADATA\DPBSDEV2\ODM.ORA";
set newname for datafile 29 to
"E:\ORACLE\ORADATA\DPBSDEV2\OMS_REPOSITORY.ORA";
set newname for datafile 31 to
"E:\ORACLE\ORADATA\DPBSDEV2\OWB_REPOSITORY.ORA";
set newname for datafile 32 to
"E:\ORACLE\ORADATA\DPBSDEV2\OWB_REPOSITORY_IDX.ORA";
set newname for datafile 34 to
"E:\ORACLE\ORADATA\DPBSDEV2\SECURITY.ORA";
set newname for datafile 35 to
"E:\ORACLE\ORADATA\DPBSDEV2\SIMS.ORA";
set newname for datafile 36 to
"E:\ORACLE\ORADATA\DPBSDEV2\TOOLS.ORA";
set newname for datafile 37 to
"E:\ORACLE\ORADATA\DPBSDEV2\TRANSTAT.ORA";
set newname for datafile 38 to
"E:\ORACLE\ORADATA\DPBSDEV2\UTILS.ORA";
set newname for datafile 39 to
"E:\ORACLE\ORADATA\DPBSDEV2\WINDEKIS.ORA";
set newname for datafile 40 to
"E:\ORACLE\ORADATA\DPBSDEV2\WINDEKIS_EOM.ORA";
set newname for datafile 41 to
"E:\ORACLE\ORADATA\DPBSDEV2\WINDEKIS_EOY.ORA";
set newname for datafile 42 to
"E:\ORACLE\ORADATA\DPBSDEV2\XDB.ORA";
set newname for datafile 43 to
"E:\ORACLE\ORADATA\DPBSDEV2\CHANGE_MGT_PACK.DBF";
set newname for datafile 44 to
"E:\ORACLE\ORADATA\DPBSDEV2\DWH.ORA";
set newname for datafile 46 to
"E:\ORACLE\ORADATA\DPBSDEV2\DEXIA_JOBS.ORA";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 06-FEB-08
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to E:\ORACLE\ORADATA\DPBSDEV2\SYSTEM01.DBF
restoring datafile 00002 to E:\ORACLE\ORADATA\DPBSDEV2\UNDOTBS01.DBF
restoring datafile 00003 to E:\ORACLE\ORADATA\DPBSDEV2\SYSAUX01.DBF
restoring datafile 00004 to E:\ORACLE\ORADATA\DPBSDEV2\USERS01.DBF
restoring datafile 00005 to E:\ORACLE\ORADATA\DPBSDEV2\CIF.ORA
restoring datafile 00006 to E:\ORACLE\ORADATA\DPBSDEV2\DEVELOPMENT.ORA
restoring datafile 00007 to E:\ORACLE\ORADATA\DPBSDEV2\COMPLIANCE.ORA
restoring datafile 00008 to E:\ORACLE\ORADATA\DPBSDEV2\COMPLIANCE_EOM.ORA
restoring datafile 00009 to E:\ORACLE\ORADATA\DPBSDEV2\CWMLITE.ORA
restoring datafile 00010 to E:\ORACLE\ORADATA\DPBSDEV2\DADIC.ORA
restoring datafile 00012 to E:\ORACLE\ORADATA\DPBSDEV2\DRSYS.ORA
restoring datafile 00013 to E:\ORACLE\ORADATA\DPBSDEV2\DUW_LAN_ENCRYPT.ORA
restoring datafile 00014 to E:\ORACLE\ORADATA\DPBSDEV2\ERASE.ORA
restoring datafile 00015 to E:\ORACLE\ORADATA\DPBSDEV2\EXPRIM.ORA
restoring datafile 00016 to E:\ORACLE\ORADATA\DPBSDEV2\EXPRIM_EOM.ORA
restoring datafile 00017 to E:\ORACLE\ORADATA\DPBSDEV2\EXPRIM_EOY.ORA
restoring datafile 00018 to E:\ORACLE\ORADATA\DPBSDEV2\IDX_COMMON.ORA
restoring datafile 00019 to E:\ORACLE\ORADATA\DPBSDEV2\IDX_DWH.ORA
restoring datafile 00020 to E:\ORACLE\ORADATA\DPBSDEV2\IDX_EXPRIM.ORA
restoring datafile 00021 to E:\ORACLE\ORADATA\DPBSDEV2\IDX_IMPORT.ORA
restoring datafile 00022 to E:\ORACLE\ORADATA\DPBSDEV2\IDX_SPECIAL.ORA
restoring datafile 00023 to E:\ORACLE\ORADATA\DPBSDEV2\IDX_WINDEKIS.ORA
restoring datafile 00024 to E:\ORACLE\ORADATA\DPBSDEV2\IMPORT.ORA
restoring datafile 00025 to E:\ORACLE\ORADATA\DPBSDEV2\IMPORT_EOM.ORA
restoring datafile 00026 to E:\ORACLE\ORADATA\DPBSDEV2\IMPORT_EOY.ORA
restoring datafile 00027 to E:\ORACLE\ORADATA\DPBSDEV2\INDX.ORA
restoring datafile 00028 to E:\ORACLE\ORADATA\DPBSDEV2\ODM.ORA
restoring datafile 00029 to E:\ORACLE\ORADATA\DPBSDEV2\OMS_REPOSITORY.ORA
restoring datafile 00031 to E:\ORACLE\ORADATA\DPBSDEV2\OWB_REPOSITORY.ORA
restoring datafile 00032 to E:\ORACLE\ORADATA\DPBSDEV2\OWB_REPOSITORY_IDX.ORA
restoring datafile 00034 to E:\ORACLE\ORADATA\DPBSDEV2\SECURITY.ORA
restoring datafile 00035 to E:\ORACLE\ORADATA\DPBSDEV2\SIMS.ORA
restoring datafile 00036 to E:\ORACLE\ORADATA\DPBSDEV2\TOOLS.ORA
restoring datafile 00037 to E:\ORACLE\ORADATA\DPBSDEV2\TRANSTAT.ORA
restoring datafile 00038 to E:\ORACLE\ORADATA\DPBSDEV2\UTILS.ORA
restoring datafile 00039 to E:\ORACLE\ORADATA\DPBSDEV2\WINDEKIS.ORA
restoring datafile 00040 to E:\ORACLE\ORADATA\DPBSDEV2\WINDEKIS_EOM.ORA
restoring datafile 00041 to E:\ORACLE\ORADATA\DPBSDEV2\WINDEKIS_EOY.ORA
restoring datafile 00042 to E:\ORACLE\ORADATA\DPBSDEV2\XDB.ORA
restoring datafile 00043 to E:\ORACLE\ORADATA\DPBSDEV2\CHANGE_MGT_PACK.DBF
restoring datafile 00044 to E:\ORACLE\ORADATA\DPBSDEV2\DWH.ORA
restoring datafile 00046 to E:\ORACLE\ORADATA\DPBSDEV2\DEXIA_JOBS.ORA
channel ORA_AUX_DISK_1: reading from backup piece F:\ORACLE\BACKUP\BACKUP_DPBSPR
ORA-19870: error reading backup piece F:\ORACLE\BACKUP\BACKUP_DPBSPRD1_BLJ7VKO3
ORA-19505: failed to identify file "F:\ORACLE\BACKUP\BACKUP_DPBSPRD1_BLJ7VKO3"
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
thanks for your help
Regards

can you post your connection string to the source and auxillary databases please. with a duplicate you don't need to copy any files, rman does the whole process for you.
regards
Alan

General questions on how to get started with Oracle OEPE and databases

My company has a server in the cloud, written using Ruby on Rails. The server is designed to work with a browser, so it communicates via standard HTTP.
The server has an SQL database.
The server sends and receives HTTP requests from clients, which are then used to either update the database or retrieve information from the database.
The database can be edited from a separate admin dashboard.
I have recently rewritten our client software as a native android app. The new app makes calls to the server that look like browser calls. I have used Eclipse to develop the Android app.
Sounds pretty standard so far, right? :-)
I now want to replace the Ruby on Rails server with a new Java server that I will write. I want to use Eclipse to develop the new server. During development, I want to be able to have the new Android app communicate with the development server software that will reside on my desktop.
So I was thinking that Oracle's tools might be perfect for me, if only I knew which tools to use. There are lot to choose from. :-)
I believe that all I need is OEPE and a database. I would like to keep it pretty simple. I don't want to learn 20 new tools. It will be enough effort to become proficient in OEPE and a database.
I looked at "Oracle Database Tools >> Connecting to an Oracle database" in the help files for OEPE 12.1.1. I tried going through the help files for Database connections, but I got to a "New Connection Profile" form that asks me for a SID, a user name, a password, etc. I don't have any of those. I tried to enter some data in the forms and ping the database, but I could not get any results from the ping. So my first question is: Do I have to sign up for an Oracle database in the cloud or is there a database contained within the OEPE software that I just installed. I will have to do the former anyway when I eventually deploy my new server software, so maybe the right thing to do is sign up for the "database in the cloud" service now, and use it during development.
The other question I have is about getting a simple application client and server application sample. I found a "hello world" example at http://docs.oracle.com/cd/E13224_01/wlw/docs103/guide/webapplications/workshopJSP/tutorialJSP/TutorialJSPMakeJSP.html, but that is for WLS 10.3 and it doesn't seem to match the 12.1.1 software very well.
So does anybody know where I can find a simple client and server sample program for WLS 12.1.1?
If I can get these two questions answered, I can start making some progress.
Thanks in advance to anybody who can help me navigate this minefield.
Jim

I wanted to add some information to my previous posting.
1. The server I will develop will communicate ONLY with Android and iOS native apps, so the interface will not be HTML or XML. The information sent by the server to the client will be JSON. The information sent by the client to the server will be HTTP parameters, usually in the form of URL-encoded form data. This is not a browser-to-server server interface, so JSP is probably not appropriate for the server. The communication protocol will be HTTP.
2. I don't need anything fancy on the server side. The server will simply be a Java program that emits JSON responses to the client and receives URL-encoded form data from the client. The server program will also make database queries and update the database.
3. I don't understand how my native Android app will be able to communicate with my development server code running on my desktop. I want that communication to be over the internet, but my desktop does not have a static IP address, so I don't see how the app will be able to address the development server software on my desktop PC. I don't want to deploy the server software into the cloud every time I start a debug run, but I don't see any other way for my app to be able to address the server code over the Internet.
If anybody has any ideas, I would appreciate hearing them.

The bottom part of my iphone4 screen cannot tap.. restored 2 times with latest firmware and yet still the same..is it possible to fix this?how?

The bottom part of my iphone4 screen cannot tap.. I restored it 2 times with the latest firmware and yet still the same..is it possible to fix this?how? please guys help me =(

iPhone and iPod Touch: Troubleshooting touchscreen response: http://support.apple.com/kb/TS1827

How to distribute the serial core only with my exe and DLL application using the Labview application builder 8.21. I'm not interested having MAX and other components installed on the customer PC and in the program menu

Since Labview ver 8.0 and later, I am not very happy with the new way the project installer is managing the additional drivers such as Serial.
With LV 7.11 the serial components was included in the cab file and was installed on the target computer in a specific directory. The size of the distribution was pretty small and well suited for compact distribution.
My LV application use only the serial object and with LV 8.21, if I include the serial 3.2 component, I get an enormus file including max, visa ... and a lot of fucky component I do not need.
To distribute my application, I just need, the runtime engine and the serial driver as it was with the version 7.XX
Looking for clever advises from you gentlemen!

Thanks Dennis for you input
My problem is in fact very simple. 3 years ago, I developped a software suite for X ray generator; My company is selling such generator all over the world and our control panel software and DLL (for OEM integrator) is based on Labview professionnal development plateform.
To drive our generator, we just need to transfer ascii data using the strandard RS232 port still present on most of equipments used in the industrial area.
Until LV version 7.11, there was no problem to include serial component in my distribution with a very reasonable size and transparency for the end user.
with LV 8.xx (preparing a new release), I'm very disapointed to see, my distribution is increased of about for 10 Mo to 180 Mo just because I increase the serial component.
May I mix a previous version of the serial component with LV 8.21?
Should I change my source to Visa instruction only and merge visa runtime only to my distribution?
is there any simple serial example based on visa and distributed with th application builder?
I will appreciate your help in order to optimize my distribution
Pascal

Can I use old dbf, ctl and redo.log files on re-installation? URGENT

Hello,
DB: 10.2.0.1.0
Because of some reasons I am reinstalling Oracle DB in our test server.
Prior to install I removed all files under ORACLE_HOME.
But I am keeping my old datafiles, redo.log & cntrl file.
Is it ok that to define same Database files location where my old files existed?
we have dbf, redo.log, ctl files in that location.
I wonder if I used the same files than I probably do not need to create new data files and also do not need to required import data. This is our test database.
D

If all database files are intact then you can reinstall the Oracle software and just start the pre-existing database. All the files would include the spfile or a copy of the init.ora.
In fact that is one way of doing a version upgrade by overlaying $ORACLE_HOME with the new version. We like to install in a new home since we usually run multiple versions at one time and then start the existing databases using the new release and running the database upgrade scripts one at a time when the release proves stable.
HTH -- Mark D Powell --

How restore database only with dbf, ctl, and redolog file

Similar Messages

Maybe you are looking for