How rman backup messages printed in alert file?

surprised how the messages of rman getting printed in alert file?
i am using 10.2.0.4 on AIX and using veritas net backups.....from rman.....
ORA-19624: operation failed, retry possible
ORA-19506: failed to create sequential file, name="c-1650503797-20091118-0c", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:

Raman wrote:
Well. i agree. we have logs to capture media backups....so wanted to cut only these media backups failure out of alert file...else what is happening here is our monitoring reports these as alerts as already we know from media backup logs...So why not modify your monitoring of the alert log to exclude that particular error?
Personally, I'd allow both systems to continue to report the error from their perspective.
>
in nutshell...just exploring any options to turn off the media backup failures like any rman parameters or can anything to do with veritas parameters?
Anyway thanks to all for your valuable opinions.
Thanks,
Raman.

Similar Messages

How to backup both my MacBook air files and Windows 7 files via Parallels?

Hi,
I'm new to apple support........I need to purchase an external drive to backup my files from my MacBook air but I also need to backup two main programs that i use for my business on Win7 via Parallels.
Can I use the same drive and/or time machine for both?
Or do I need to use two different methods?
Thanks in advance!
Chef Heather

Any backup utility will backup the pseudo-disk that Parallels uses just like any other file on the drive. But if you are going to do that I recommend not using Time Machine. Time Machine will backup the pseudo-disk every hour even if only one byte changed. In no time at all your backup drive will be full. I suggest you use a different utility that overwrites changed files, only.
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

Message in standby alert file

I am recieving this error messgae in standby alert file. Any one have idea about this message
ksvcreate: Process(m000) creation failed
ksvcreate: Process(m000) creation failed
ksvcreate: Process(m000) creation failed
Thanks

According to metalink Note:352388.1:
>>
Cause:
Additional M000 slave processes cannot start
Solution:
Increase value of the repository database 'processes' parameter. Ensure
it is set to at least 150.
>>

How to backup messages in Spice fire one?

I am using Spice fire one and want to reset it but I do not know how to backup my messages because it contains really important messages.

Hi abhipuru,
Unfortunately, there are no native features in your device to backup your SMS messages.
You may contact the manufacturer of your phone, Spice, and they may be able to provide you with a solution for this.
You may also be able to backup some information in your device using the application PC-Sync from the Firefox Marketplace:
* [https://marketplace.firefox.com/app/pcsync?src=search]
- Ralph

How to backup messages on iphone

WHY IS IT SO DIFFICULT TO BACKUP MESSAGES </3
I need to restore my iPhone and i just wanna backup my messages ..
i don't wanna use the stupid program that called iTunes because i ONLY wanna backup messages
please help me guys i'm using mac
please if you know a free program that can backup messages let me know
THANKS !

iTunes backs up messages, along with other things.
iTunes makes it easy to restore to your iPhone. iTunes should definitely be your way to proceed.

ORA- Error messages in Oracle Alert File

Hello Gurus,
In a SAP - BW system installed on Oracle 8.1.7.4, there were some oracle errors entries as follows;
Fri Nov 3 02:13:32 2006
Errors in file /oracle/<SID>/saptrace/background/p001_14866_<sid>.trc:
ORA-00603: ORACLE server session terminated by fatal error
ORA-00052: maximum number of enqueue resources (8000) exceeded
ORA-00052: maximum number of enqueue resources (8000) exceeded
How fatal is this error? how to make sure this doesnt happen again and anyone can share the SQL command to see how many ENQUEUE_RESOURCES are being used?
If i have to increase the enqueue, where and how to do it?
Thanks in advance for your help.

Hi "Basis Learner",
1. Oracle 8.1.7 is out of date! It's not maintained anymore.
2. You don't need SQL to tell how many enqueue resources have been used here. The message is clear: 8000. The current maximum. Not a single one more and no less.
3. Well how many more you'll need is hard to tell. But oviously more. Try with plus 50% -> 12000.
Since the process that died here had been a paralle query server process, it may also be the case, that you've configured too many parallel servers. As they run at the same time (parallel) they'll make use of enqueues at the very same time...
4. Of course there are notes:
398927 - ORA error as the dimensions of the parameters are too small
745639 - FAQ: Oracle enqueues
632427 - Oracle 8.1.7* database parameterization for BW
Hope that helps.
KR Lars

E61 - how to backup messages saved to a customized...

Hi,
I want to backup all the contents of my E61 prior to handing it in for repair again. The screen doesn´t work, so I cannot navigate on the phone itself though I can connect it to my PC.
In the "Nokia Communication Center" (I use Nokia PC Suite and that´s what opens when I hit the envelope symbol), I only see the following SMS folders: Inbox/ Draft/ Sent/ Outbox. On my phone, however, I have created a custom folder "important" and the text messages in that one are - well, important. One holds a licence key I needed to activate a piece of software and I don´t have that key any other place.
Can anyone give me a hint how I might be able to backup the contents of that folder?
Thanks a lot!
Regards,
Hendikoischnur
IT will paint our future - either green or black
* ecosia, the eco-friendly search engine (powered by Yahoo/Bing/WWF);
* Searching for pics online? Try ecocho.eu or treehoo.com
* For those who don´t want to miss Google: Try znout.de - it´s Google running on green energy
* CO2-free chatting: Try Jabber-server.de (running on 100% waterpower)

Hello?
Does no one have any ideas on this one? I would hate to have to buy that software again on top of everything else I face until I have a working phone again...
I suppose that when I do a full backup including the messages (via PC Suite), those customized folders will also be backed up - but I´d like to be sure.
I want to give it a shot and hand my phone in, at least to get a cost estimate so I can judge if it´s worth repairing or if I´d be better off with a new one from ebay.
Regards,
Hendikoischnur
IT will paint our future - either green or black
* ecosia, the eco-friendly search engine (powered by Yahoo/Bing/WWF);
* Searching for pics online? Try ecocho.eu or treehoo.com
* For those who don´t want to miss Google: Try znout.de - it´s Google running on green energy
* CO2-free chatting: Try Jabber-server.de (running on 100% waterpower)

How to BackUp Restore Large Library "original file could not be found"

I've searched the archives for this with no clear answer, and am reposting to avoid confusing anyone.
I am working on a manual and seamless BACKUP-RESTORE process to manage my large 100-gigabyte-plus iTunes library.
+++++
First, my iTunes folder is in default location:
Boot drive> User> Music
I don't keep any music in this folder.
New music is imported into this folder, copied over to my Music Library, and then deleted from iTunes folder (to keep it and my boot drive clean, and my 100GB Music Library folder meticulously organized).
My iTunes folder is set at default:
iTunes> Preferences> Advanced> Change> iTunes Music folder location
My actual 100-gigabyte-plus music folder is stored on a 2nd hard drive:
HardDrive> Music Library
This setup works perfect.
+++++
BACKUP
To backup, I simply:
1) copy my User> Music> iTunes folder (800mb) to a 3rd hard drive.
2) copy my HardDrive> Music Library to 3rd hard drive
RESTORE
To restore, I simply:
1) copy my backup iTunes into User> Music.
2) copy my Music Library back to 2nd hard drive HardDrive.
3) Relaunch iTunes and every works perfect.
THE PROBLEM
However, if I change the name of my 2nd hard drive (where my 100GB music folder is stored) — iTunes shows everything in place — all songs, art, playlists — but I get following error on every song:
THE SONG NAMED ______ COULD NOT BE USED BECAUSE THE ORIGINAL FILE COULD NOT BE FOUND. WOULD YOU LIKE TO LOCATE IT?
Obviously I don't want to have to do this individually for 30,000 songs and am looking for instructions how to point iTunes database back to my 2nd hard drive> Music Library and complete the restore process.
I am hoping this can be done without changing my work flow — and it is a simple and logical move to tell iTunes where all the original files (missing songs) are stored.
+++++
Previous discussions have noted:
Following this Apple Support Doc
http://support.apple.com/kb/HT1589
I was able to Quit iTunes, relaunch iTunes holding Option key, and chose my existing library (from my Music folder) — it works, everything shows up — but iTunes still doesn't know where my songs are (on my 2nd hard drive).
If I point the Option+Open iTunes library prompt to my 100GB Music Library (on the 2nd hard drive), it tells me (logically) there is no library there).
I've also launched and manually verifies iTunes> Preferences> Advanced> Change> iTunes Music folder location — it works, everything shows up — but iTunes still doesn't know where my songs are (on my 2nd hard drive).
I anticipate more complications if I reset iTunes preferences to my 2nd hard drive or start dinking around trying to see what works and what does not work.
+++++
At this point I am trying to make THIS workflow, backup-restore process work — so I am hoping someone else has slugged through this and can take a few minutes to clue me in the right direction (or at least tell me there is no way to do what I am trying).

If I simply rename the second hard drive to the name of the original 2nd hard drive — iTunes is successfully restored.
I am still looking for a better way because I want to change the name of the second HD...

How does the messaging delete the mail files?

I founded that when I delete the messages and purge these messages in the MS outlook . I cannot see these message in the Trash folder in MS outlook . but if I use the unix command to see my Trash directory . I founded the message still at there. why? and when these message will be really deleted ?

Sorry, my question is not clear. I mean messaging utility.
$configutil -o local.schedule.expire
0 23 * * * /opt/SUNWmsgsr/sbin/imexpire
After user delete messages from client. By default messaging server will remove there messages at 11PM everyday.
I want to remove this message only, don't want to remove all messsages in mail store.
example: User remove the messages number 5-10.msg already from client. But there files still on unix directory.
If I want to remove there messages before 11PM.
My question is, Can I remove there messages by messaging command line.
hashdir/=username/00
1.msg 2.msg 3.msg 4.msg 5.msg 6.msg 7.msg 8.msg 9.msg 10.msg
Thanks you for your help.
Sorry for my english.

How to display message in the alert box

hi every one,
i am inserting some data into the fields and selecting the button to insert.
but it is inserting even fields are empty..
i want to display "so and so field is empty.. please enter"
it should display a box and return if u press ok.
how to do this

Hi,
I think this code will help you.
public void onActionAddressSelected(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionAddressSelected(ServerEvent)
          String dialogText = "Would you like to fetch this EmaiId ?";
         IWDConfirmationDialog dialog = wdThis.wdGetLoginController().wdGetAPI().getWindowManager().createConfirmationWindow(dialogText,wdThis.wdGetAPI().getViewInfo().getViewController().findInEventHandlers("Yes"),"Yes");
          dialog.addChoice(wdThis.wdGetAPI().getViewInfo().getViewController().findInEventHandlers("Cancel"),"Cancel");
          //dialog.addChoice(eventHandler,"OK");
          dialog.setWindowPosition(WDWindowPos.CENTER);
          dialog.open();
          //wdThis.wdGetLoginComponentController().fireAddressSelectedEvent();
    //@@end
Regards,
Karthick

Rman backup command hangs for datafile ,works with archivelogs backup.

Issue is archivelogs backup is going fine ,But when we go for datafile backup its hanging there from oracle side as not able to give file handle.
RMAN session started with debug it gives only
DBGRPC: ENTERED krmqgns [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: looking for work for channel default (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: commands remaining to be executed: (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: CMD type=backup cmdid=1 status=STARTED [expect.cpp/673]
16:00:40.19 DBGRPC: 1 STEPstepid=1 cmdid=1 status=STARTED [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: no work found for channel default (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: EXITED krmqgns with status 1 [expect.cpp/673]
16:00:40.19 DBGRPC: krmxpoq - returning rpc_number: 17 with status: STARTED16 for channel sqlbt_ch1 [expect.cpp/673]
16:00:40.19 DBGRPC: krmxr - sleeping for 10 seconds [expect.cpp/673]
Is any body seen this type of message from rman.
Thanks
Shirish

OK. Did you miss the second Oracle document?
RMAN Debug For Backup Shows "krmxr: sleeping for x seconds" [ID 458259.1]
Also a ton of information here :
RMAN backup database as copy from file system to ASM diskgroup very slow
and here :
RMAN Error > Please assist!
and here :
RMAN and Amazon Web Services
http://oravdba.blogspot.com/2011_01_01_archive.html
Best Regards
mseberg

Rman backup query

db 10.2.0.4
AIX 5.2
if I require to restore full backup or some of datafiles from previous date backup example today is 19th march 2012 and I need to restore 8th march 2012 backup
how could I get this using rman?
Thanks

user11969485 wrote:
Actually it has been dropped a table by mistake by develpor one week before and we must need to recover that table using rman because we are taking backup by rman on tape and fyi tivoli is not configured on other server so we canot restore the backup to other server and try to recover table, I can only restore the backup on same server where the table is dropped. please suggest how could i recover that table in this scenario?
DB 9.2.0.8
PROD
AIX 5.2
Many ThanksThe only way to recover an individual table from a backup is to restore that backup to a 'throwaway' database, then take an export of the one table, then import that back into the real database.
rman backup backs up and restores files, not individual database objects.

Restore an RMAN backup to a new db instance name.

I have a old copy of an RMAN backup of a production database from 2 months ago. I want to restore it to a new instance name. The backup no longer shows in the RMAN backup listing from the control file of the current production system.
The backup I have does have the control file as well as the other backup pieces, Is there a procedure to restore this to a new instance since the backup is no longer in the current production control file?
I have used the duplicate command of RMAN and have successfully restored databases to a new instance name by using the newname option.
But the backups were always in the control file.
Can this be done? If so, how?

You need to restore the controlfile first and copy it into all locations where init.ora specify them. then startup mount, and 'rman / target' will give you access to the old contents of the controlfile at that time.. If the rest of the back is on tape, you need to restore the rman backupset first to disk on same location specified in the backupsets paths. same for the archivelogs.
Then you can decide to go for a duplicate database to target <newname> or a restore DB (must have the same name). but was the DB a cold backup ? then remember than Rman does not takes the redo logs, so that your shutdown before must be clean (shutdown immediate at most). If it is an hot you may need need to dump the arc and possible do a recover manual (case you forgot to put the arcchives or the archives names is not the same in the init.ora than original for you include the db name in it).
In that case the archive logs may be renamed to what ever is in the init.ora. and there are many others possbilities. you did not specified enough data on the backup

Rman backup with corrupted block

Hello,
Firstly - I have problem on non-production database 11.2.0.1.0, so I am not deeply worried about data. But I need to understand what happened with database backups and how to prevent such things in future.
So - I have EM scheduled weekly full backup and daily incremental backups. Later there was problem with hardware and some corrupted blocks in database were found. The weekly backup ran without error and obsolete backups were deleted. Now it is not possible to "recover corruption list" because no backup without corruption exists (RMAN-06023: no backup or copy of datafile 6 found to restore). I am not worried about the lost data, but I need to find out how come the backup contains corrupted block.
I have checked the data file using dbv utility
DBVERIFY - Verification starting : FILE = /opt/oracle/oradata/orcl/users03.dbf
DBV-00200: Block, DBA 27525766, already marked corrupt
csc(0x0001.7b01729f) higher than block scn(0x0000.00000000)
Page 2359942 failed with check code 6054
DBVERIFY - Verification complete
Total Pages Examined         : 3840000
Total Pages Processed (Data) : 453896
Total Pages Failing   (Data) : 1
Total Pages Processed (Index): 2959104
Total Pages Failing   (Index): 0
Total Pages Processed (Other): 424025
Total Pages Processed (Seg) : 0
Total Pages Failing   (Seg) : 0
Total Pages Empty            : 2975
Total Pages Marked Corrupt   : 1
Total Pages Influx           : 0
Total Pages Encrypted        : 0
Highest block SCN            : 2156227446 (1.2156227446)As you can see the datafile 6 - user03.dbf has errors. Also backups now contain errors.
1) So how is it possible that the EM scheduled backup ran without problems and the backup now contains corrupted blocks. How to prevent this in future ? I know there is setting MAXCORRUPT. How can I check its current value ? How can I configure it using EM scheduled backups ?
2) Secondly, meanwhile I studied the RMAN commands. So I have suspended EM backup jobs, and executed follwing command. And backup ran without error again. How is this possible, if data file users06.dbf has corrupted block ?
Thanks !
RMAN> run {
set MAXCORRUPT for datafile 6 to 0;
backup as compressed backupset datafile 6;
2> 3> 4>
executing command: SET MAX CORRUPT
Starting backup at 07-NOV-12
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
using channel ORA_DISK_5
channel ORA_DISK_1: starting compressed full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00006 name=/opt/oracle/oradata/orcl/users03.dbf
channel ORA_DISK_1: starting piece 1 at 07-NOV-12
channel ORA_DISK_1: finished piece 1 at 07-NOV-12
piece handle=/opt/oraBackup/rman/nrnpo0sg_1_1 tag=TAG20121107T200120 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 01:13:05
Finished backup at 07-NOV-12
Starting Control File and SPFILE Autobackup at 07-NOV-12
piece handle=/opt/oraBackup/rman/c-1253245572-20121107-03 comment=NONE
Finished Control File and SPFILE Autobackup at 07-NOV-12

I have updated database to 11.2.0.3
However, the problem still persists. rman backup went ok on broken file
oracle@orcl-cluster:~> sqlplus
SQL*Plus: Release 11.2.0.3.0 Production on Tue Nov 20 09:24:11 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from V$DATABASE_BLOCK_CORRUPTION;
     FILE#     BLOCK#     BLOCKS CORRUPTION_CHANGE# CORRUPTIO
         6    2359942          1                  0 FRACTURED
        25    1855622          1                  0 FRACTURED
oracle@orcl-cluster:~> rman target /
Recovery Manager: Release 11.2.0.3.0 - Production on Tue Nov 20 08:04:57 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: ORCL (DBID=1253245572)
RMAN> backup as compressed backupset datafile 6;
Starting backup at 20-NOV-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1596 device type=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID=1568 device type=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: SID=2357 device type=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: SID=2341 device type=DISK
allocated channel: ORA_DISK_5
channel ORA_DISK_5: SID=86 device type=DISK
channel ORA_DISK_1: starting compressed full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00006 name=/opt/oracle/oradata/orcl/users03.dbf
channel ORA_DISK_1: starting piece 1 at 20-NOV-12
channel ORA_DISK_1: finished piece 1 at 20-NOV-12
piece handle=/opt/oraBackup/rman/2rnqovpp_1_1 tag=TAG20121120T080513 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 01:10:35
Finished backup at 20-NOV-12
Starting Control File and SPFILE Autobackup at 20-NOV-12
piece handle=/opt/oraBackup/rman/c-1253245572-20121120-00 comment=NONE
Finished Control File and SPFILE Autobackup at 20-NOV-12
RMAN> backup validate datafile 6;
Starting backup at 20-NOV-12
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
using channel ORA_DISK_5
channel ORA_DISK_1: starting compressed full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00006 name=/opt/oracle/oradata/orcl/users03.dbf
channel ORA_DISK_1: backup set complete, elapsed time: 00:03:05
List of Datafiles
=================
File Status Marked Corrupt Empty Blocks Blocks Examined High SCN
6    OK     1              2975         3840000         6489027926
File Name: /opt/oracle/oradata/orcl/users03.dbf
Block Type Blocks Failing Blocks Processed
Data       0              453912
Index      0              2959091
Other      0              424022
Finished backup at 20-NOV-12Edited by: kamilp on Nov 20, 2012 12:23 AM

How to multiplex the block change tracking file?

Hi,
I have a question to change block tracking feture.
The normal way to enable block change tracking would be:
ALTER DATABASE ENABLE BLOCK CHANGE TRACKING
USING FILE 'mydir/change_track.f'
REUSE;
What if my harddrive is gone?
Is there anyway to define more than one destinitaion like for archive log files?

The difference is... archive log files can contain irreplaceable data.
With Block Change Tracking the data is not irreplaceable , just run full RMAN backup and then regen the file. <- IMHO

How rman backup messages printed in alert file?

Similar Messages

Maybe you are looking for