How ro reset Iphone 3 after break of update; see onyl on display the Itunes logo and the USB cable;
updatre to higher OS wa sinterrupted since then my Iphone 3 deos not connect to Itunes anymore.; Question is now hjow to reset /start the Iphone.
Cheers Michael
Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414
Similar Messages
-
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
my iphone has a itunes logo and usb cable picture on the screen....what can I do to get it to work
What happens when you plug your phone into itunes
-
My ipod is displaying the itunes logo and a usb cord. I've tried resetting it but it didn't work. Any suggestions?
Your in DFU mood do this:
iOS: Unable to update or restore
Follow these steps to perform a recovery-mode restore on your iPhone, iPad, or iPod touch
You may need to perform a recovery-mode restore if you experience any of the following situations on your iPhone, iPad, or iPod touch. The device:
Displays the Apple logo with no progress bar or a stopped progress bar for over ten minutes.
Restarts but never displays the Home screen.
Is no longer recognized in iTunes after an update or restore did not complete.
Automatically goes into recovery mode after having an issue while installing an update or performing a regular restore.
How to perform a recovery-mode restore
If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Additional Information
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. -
iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. I have tried to reset it manually and via iTunes (not responsive), linked it to iTunes (not recognized), etc. Nothing works. This happened after an iTunes updated, after I was asked to "restore" my iPad to factory settings.
Thanks, King_Penguin. Yes, I tryied putting the iPad into recovery mode. It freezes in the black screen with the iTunes and USB cable. When I followed the instructions and then started iTunes, I received the following message: "A required iTunes component is not installed. Please repair or reinstall iTunes (-424040)".
I have unistalled iTunes three times already and donloaded and installed three new versions. No luck.
Thanks a billion once again! -
My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?
The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367 -
I was trying to transfer itunes to my macpro from my iphone 4 and the phone froze up with the itunes logo and a usb cord looking like its suppose to plug into the itunes.. Now my phone wont go past that screen and i cant use the phone at all... Help if you can?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
i was updating my iphone 3gs software on my pc and it came up with an error and since then i have just had the itunes symbol and a usb cable on my screen. i cant do anything with it what can i do?
The only thing you can do is what the picture is telling you to do: plug it into iTunes and restore it.
-
So just like last time I tried to update my iPhone software...MY PHONE IS FROZEN. Displaying iTunes icon and a USB cable I pressed the Power button and the menu botton together until the apple icon appeared held them down for 10 secs & NOTHING Now what? Do I just wait for the battery to run out?
Hi Careesa,
Your iPhone is in recovery mode-- you need to connect it to your computer and, most likely, iTunes will ask you to restore it. If you recently backed up this shouldn't be too much of a problem. -
I tried to update my iphone,,ran downstairs ot garden since it took 30 minutes. I cam e back with an itunes logo and plug on the front cannot use my phone or call it....apple's store in tampa is close...I will probably get in a car accident on my way to the store 1 hour and 30 minutes away after I get pulled over for speeding after I get a flat tire(;
Hello hstacy
Check out the articles below to troubleshoot issues with resolving issue with issues updating your iPhone. If you are having issues with it not being seen, pick one of the two articles that goes with the type of computer you have.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G. -
I am trying to restore my Iphone but get a message that reads "The Iphone "Iphone" could not be restored. The device cannot be found.
Can anyone help?
Thank you.That screen indicates that you need to connect the iPhone to your computer with the USB cable and restore from iTunes
Allan -
We just did the iPhone update ios 6. The screen is frozen with the iTunes logo and a picture of a USB cale across the screen. none of the buttons respond.The phone does not recognize the apple USB when connected. We tried holding all the buttons down at the same time and also removed the SIM card and reinserted.
If it's not being recognized while it's in recovery mode in your itunes, try this
plug the phone into the usb attached to the computer
hold down the home and sleep/wake button on top simultaneously until the phone's screen goes black
When the screen goes black, release your finger from the sleep/week button on top but continue holding the home button until you see a dialog on the itunes screen on your computer that says 'itunes has detected a device in recovery mode'
then say 'ok,' select 'restore,' and say 'restore and update' -
HT201210 iphone displays "itunes" logo with a USB cable pointing toward it
Hi
Whilst downloading the latest "itunes" update, I left the room and came back half an hour later to discover the above on my iphone screen.
On switching the phone off to remove the symbol message, the same message on a black background was all I could access each time I restarted the phone.
Any ideas of what happened and how I can use my phone normally again.
Your help would be appreciated.
Portsalon8Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
hi
i am using iphone 3gs. today i downloaded the new ios6. after the downloading the phone switched off and now there is a sign of itune and usb cable on my screen and nothing else is happening. i dont have mac. i am using compaq 610. kindly guide me, how i can restore my iphone.
thanks
MustafaYou must have the latest version of iTunes on your PC, and you must connect the phone to your PC with a USB cable. It should then be recognized in iTunes and should restore. If it does not see: http://support.apple.com/kb/HT1808
-
HT5052 how to active iphone 3gs after i updeat to version 5.0.1 from itunes
please i need help i update my iphone 3gs from itunes to version 5.0.1 after update i can not active my phone? i hope somebady answer as soon as posebil this my email [email protected]
Why can't you activate it? What message(s) are you getting when you try?
Maybe you are looking for
-
WS_DELIVERY_UPDATE doesn't create batch split in IBD
Hello, I am using the FM WS_DELIVERY_UPDATE to update the Inbound delivery and post GR against it. The problem I am facing is that when there is a batch split for a line item, the same is not being reflected in the IBD. The GR happens successfully bu
-
Receiver jdbc adapter:how to implement the insert or update action in a sql
Hi,gurus: I'm using receiver jdbc adapter now. You know, we have to gave the action the value 'update' or 'insert',but in our case,the action is variant--update or insert.It decides whether the record exists in the outer database. Can stored procedur
-
Hi gurus, we are having a problem with the PCR .When the lower manager submits the request it is succesfully submitted but it is not appearing in the other level Manager worklist or in the PCR status.We are using the workflow 50000041 for all the PC
-
Even spacing of objects? (justification)
CS4 Given 4 objects of the same size/shape aligned on one row. The left object is aligned to where is is suppose to be on the left and the right object is aligned to where it is suppose to be on its right edge. Now, how do I evenly space the other tw
-
VPN between Mac and Windows? share printer and USB drive
Hey everyone, I'm out at college and have a Windows SP2 desktop set up in my room with the printer and our external hard drive. I travel around campus with my macbook pro (10.5), and it'd be really nice to access the printer and my external hard driv