How saknr is diff from hkont as both are General Ledger Account no??

While exploring BSEG table (Accounting Document Segment) I found that both saknr and hkont are there...its not clear to me what is the diff b/w them as both carry General Ledger Account no.

hi
check this thread
Re: Difference between SAKNR and HKONT in BSEG
hope it helps you.
thanks
Sachin

Similar Messages

How is data loaded from Infocube to Planning area - need technical info

I would like to find out how data is loaded from cube to planning area ,
I know that CUBE has tables, but how does that get loaded to planning area , where is the mapping from which I can compare
data in CUBE and the same data that reaches planning area.
Say for example I have below values in the infocube
Prod1 --> Loc1 -
> available provisioning qty
AAA AB90 100
Then where do i check in the planning area tables ( are there any tables mapped) after running the TSINPUT program, i know it can be checked in the planning book , but i want to check in planning area tables if they exi

Hi ,
The data is loaded from infocube to planning area using update rules. The issue you have mentioned seems to be two requests are having data for the same CVCs in the cube.
Example: For the same CVC, two requests avilable in the infocube. When you copy the data using TSCUBE transaction, whatever data avilable in the cube for the CVC gets copied into Planning Area.
CVC1 - cube - Old Request - 100
CVC1 - cube - Actual Request - 200
CVC1 - Planning Area = 300 ( The value is supposed to be 200, but since the old request also contains data in the cube for the cvc, it gets copied as 300)
Issue : There might two request contains data for the same code
Solution : 1. Check the data in the cube using transaction LISTCUBE 2. Delete old request and check the data agian. 3. If it matches with your requirement, run the TSCUBE again.
Please let me know if you need additional information.
Thanks,
Jeysraj

I see how to delete songs from iPad, but there are some that won't give me the option to delete when I swipe it. Why won't it let me?

I see how to delete songs from iPad, but there are some songs that don't give me the option to delete when I swipe them. Why can't I get rid of these songs?

Do they have a cloud icon next to them? If they do, they aren't on the iPad so you can't delete them. They are in iCloud ready for you to download them if you want to and they are visible in the music app for this purpose.
If you don't want to see these songs that are in iCloud, go to Settings> iTunes & App Store>Show all>Music>Off.

Best practice for retraction of data from BPC 10.0 to General Ledger

Hi All,
I have the requirement to retract data from BPC 10.0 to General Ledger.
What is the best practice for doing this?
I have read the "How To... Retract data from BPC 7.5 NetWeaver to SAP ERP Cost Center Accounting, Part I", but this is prepared to transfer data to Cost Center accounting. Will General Ledger be populated automatically?
What is your opinion on this?
Best regards,
JA

Hi Rich,
In BPC 10 NW, the data entered in Input Forms has to be retracted to ECC.
For this retraction we are following below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c029accf-6d95-2d10-79aa-cc291180bf73?QuickLink=index&overridelayout=true&59180354379512
In this document, I am unable to get the details of class ZCL_BPC_RTRCT_SUPERCLASS.
as it is Z class, i am unable to create in my system.
could you please help me.

Changes from 11i to R12 for General Ledger Module

Can anybody help me from where can i get the document for technical changes from 11i to R12 for General Ledger Module.

check at:
http://www.oracleappshub.com/general-ledger/r12-oracle-general-ledger-new-and-enhanced-features/

Data migration of General Ledger Account from 5.0 to 6.0 server.

I want to transfer data from old sever to excel sheet and then to new server (6.0) using LSMW in this which of the methods to use (BAPI or IDoc or Direct input programs). And i need to know the step by step procedure to it.
The data which needs to be transported is General ledger account with company code (example: w100).
Thanks and Regards,
Srikanth

Please let me know if your issue was resolved. I have similar issue now.
Thanks,
Sailaja

How to see changes to a general ledger account?

Hi,
Is there a transaction code how I can see changes to a general ledger account?
Best regards,
Eric

FS04 / FSp4 / FSS4

How to create Analysis from two different subject areas with diff models

Hello,
I have problem with create analysis from two different areas with two different models (Model Star and Snowflakes) build in BI Admin tools.
First Model A = Subject Area A have one fact tables (with measures) and three dimensions tables (Model Star)
Second Model B = Subject Area B have one fact table (no measures) and five dimensions tables (Model Snowflakes).
I'm looking solutions how I can give good results. In this case I can't use UNION, INTERSECT etc., because this models haven't the same number column and data type?
whether it is possible to do in OBIEE?
Please help me
Kind regard
robix

Hi
One thing to understand is that if your are imagining having two Subject Areas (SAs) displayed and then dragging columns from each into your Request without any preparation, then no, that can't be done. You would need to do a join in the BMM layer and expose the column from the second Subject Area in the presentation layer.
But if you indeed interested in UNION (or intersect) queries, then do this:
Build your first query in the first SA in the usual manner. Note the number of columns and the data types of each column.
Now at the bottom of the Criteria workspace, there is a button called "Combine with similar request." Click it.
Select your second SA. You will note that the outlines of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.
Once you select your columns and your filters, click on result. (Oh, you will also need to decide what kind of combination you want -- click on the dropdown.) The result will be a new Request that has data from both SAs in the query and combined in the manner you select (union, intersect, etc.)
That should give you a start.
http://obiee101.blogspot.in/2010/08/obiee-combine-with-similar-request.html -- Read this link this is good one to understand with screen shots. -- OBIEE 10g
http://oraclebiee11g.blogspot.in/2011/01/querying-across-multiple-subject-areas.html -- OBIEE 11g
Award Points it is useful.
Thanks
satya

How to identify the open items of vendor/customers/general ledger

i would like to know the t.code for identifing the user wise open items for vendor/customer/general ledger.

Dear,
You can use frequently used reports like FBL1N for vendors, FBL3N for GL and FBL5N for customer. You can exeucte open item report and drag Username field from the layout and sort the report in ascending or descending order.
Regards,
Chintan Joshi

How can i identify Patch no ? How it is differ from patchsets no ?

Hello to all ;
I read official document it says
All patch and patch set releases carry version numbers. - patch set might be 10.2.0.2 , .... , 10.2.4.0 , 10.2.5.0
How can i identify patch number ? My DB version is 10.2.0 is , what's my patch release no ?
Thanks in advance ..

Ok. Almost i got well information about patches from HERE ..
Collected information's from here :0 , If my understanding is wrong , please correct it
patches Patches are software programs for individual BUG FIXES. Oracle issues product fixes software, usually it is called as patches.
patche SetsA group of patches form a patch set. Patch sets are usually applied to upgrade oracle version. EX ( 10.2.0.1 to 10.2.0.4 )
If my DB needs patch ,I want to upgrade DB , version to Version (10.2.0.4 to 10.2.0.4)
If my oracle S/w needs patch ,A small collection of files are replaced to fix certain bugs , when aaplying patch into my oracle S/w
When applying patch/patch sets , what affected my database directly ?It depends upon patch ..
My Special thanks :0
Ok Osama , It's my final question :
I read , If i applied PSU patch , i can't apply CPU patch ( until dB upgade to new version)- What's the specific reason here ?
If someone applied a patch on my DB , how can identify what type of patch applied on my DB ? (if it is PSU or CPU)- I mean how can i identify , whether the patch was PSU or CPU ?
How can i differentiate both patches when seeing ?
Thanks Osama ..

What is Navigate and how does it differ from Froyo to Gingerbread and honeycomb?

Navigate does not seem to appear in Application Management for Froyo, Gingerbread or Honeycomb.
So What is it? And, Where is it located?
How do I see the Release?
DroidX Froyo has Navigate that updated to include Navigation with Public Transportation option.
The DroidX with Gingerbread does not appear to have that update. Neither does the Navigate on my Xoom running Honeycomb 3.2
System update on all three show all up to date.
If Navigate is just a module in Maps and Maps is at the same level on all devices, how can I initiate the update?
Thank you for your assistance

Thanks to all community members for your input. jmccoy70, I understand your concern with wanting to be able to access the Navigate app that's on your device with Froyo Os like the devices with Gingerbread and Honeycomb. At this time, this update is not available to download so t hat you receive this update.
Navigate is apart of Google Maps. In the apps list, there is a blue triangle that points upward that launches Navigate. It may have to be downloaded on the tablet from the market.

How does Organizer differ from Bridge

I used to use PSE6 until it got lost in a HD crash. I just downloads PSE9 trial and see that it has something called Organizer rather than Bridge. I've tried importing all of my photos into Organizer, but am unsure about what this is supposed to accomplish.
I notice that Organizer didn't appear to import any of the categories and sub-categories that I had set up in Bridge, but perhaps I did something wrong.
Anyway, "importing" organizer felt a lot like importing into IPhoto, which is something I tried a while ago but rejected because I couldn't get anyone to explain how I could maintain my master file outside of the iPhoto repository. I want to keep the files that I edit in separate files because I have going on 100 gig of them and want to be able to back them up rationally, which is not something I could figure out how to do with a 100gig iPhoto repository file.
Bridge just worked with the files, which was very good, except for searching for keywords across the entire set of photos.
I was hoping that Organizer would keep a central repository of metadata but let me edit with the original files.
So, is that how it works?
Two other points/questions: 1) The Bridge UI would could be set up to display a nice big image of the file that I had selected. That is, small versions of the images were displayed on the left, while the chosen image was displayed in a much larger form at the upper right. Can Organizer do this? I haven't found any way to get it to do this. 2) I've recently tried to download a batch of new photos onto my HD into their new timestamped directories. I had to tell Organizer to import the new directories (which is fine), but Organizer would start into a never-ending stream of thumbnail generation, preventing me from doing anything else. I can't see how this can be expected, as it makes the software utterly unusable. What am I doint wrong?
Thanks, --sw

Persona is a login authentication service. It is something a website has to implement. It is totally different than lastpass, which is simply a password storage service.
Are you talking about Sync maybe? Sync is a way for you to store and synchronize your Firefox data (including but not limited to passwords) across multiple devices. [[How do I set up Firefox Sync?]] In that respect it is equivalent to lastpass.

How to animate text from center to both sides ?

How can i do this?

check the text animation effects presets in Bridge (see the help system on how to do that). There might just be one.
Learning to use the animators on text layers is confusing and nonintuitive but no impossible. Just takes patience and lots of errors. Really, it will take you ten minutes to figure this out or, if you're more like me, a few years. But the help system has everything need to know and several useful links to online tutorials for animating text.
Hang around for a while. One of the more experienced wonks will be able to explain it for you better than I.

How does ThreadStatus differ from ProcessStatus in class GPIBStatus?

When working with the GPIBStatus class of the NationalInstruments.NI4882 namespace there is a process status and a thread status. If I do not use notify, begin read, or begin write would there be a difference between the two values? Also, Could someone suggest some good reading material on writing multithreaded GPIB applications with Visual Studio dotNET and Measurement Studio.

The article "Developing Multithreaded GPIB Applications in Windows NT and Windows 95" on NI developer zone has good material on developing multithreaded GPIB applications. You should become familiar with this and also the .NET thread functions.
To answer your original question, ThreadStatus contains the GPIB status value for that thread. It is equivalent to calling the GPIB function ThreadIbsta(). ProcessStatus returns the last status for that particular process.
As an example if you had a multithreaded program with two threads; thread A and thread B and thread A called a GPIB call that returned with a mask of Complete, ControllerInCharge, and Attention, then spawned thread B with called a GPIB call that returned with a mask of Complete. Afte
r these calls occurred if you called ThreadStatus from Thread A the value would be Complete, ControllerInCharge, and Attention. If you called ThreadStatus from process B the value would be Complete. If you called Process status from either thread the value would be Complete.

How does Persona differ from using LastPast for site passwords?

I can't tell if Persona is an improvement or just another way to accomplish the same thing.

Persona is a login authentication service. It is something a website has to implement. It is totally different than lastpass, which is simply a password storage service.
Are you talking about Sync maybe? Sync is a way for you to store and synchronize your Firefox data (including but not limited to passwords) across multiple devices. [[How do I set up Firefox Sync?]] In that respect it is equivalent to lastpass.

How *saknr* is diff from *hkont* as both are General Ledger Account no??

Similar Messages

Maybe you are looking for

How saknr is diff from hkont as both are General Ledger Account no??