How SAP ECC interface with SAP SRM

Hi all,
I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM?
Thanks, best regards,
Maria

Dear Maria Bonomo,
I have gone thorugh the following link and it seems to answer your query: 
www.sceis.sc.gov/content/dnld/agydir-1B.pps
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Similar Messages

  • SAP SD Interface with SAP ISU FICA

    Hi all,
    I want to know if we bill the customer for the energy and the non energy charges seperately.
    Energy charges as per the consumption we bill them in SAP ISU and also invoice them in SAP ISU , the open item will be posted in SAP ISU FICA.
    For the Energy charges if i bill the customer in SAP SD and then i want to post that in SAP ISU FICA what kind of the configuration i had to perform.
    And when we create the Business Partner in SAP ISU it is created in SAP SD also.
    Regards,
    Himanshu

    Hi,
    Please search in sdn isu section.
    Integrating SAP SD with FICA
    Billing - SD and IS-U
    SD + FICA Integration
    sap sd and sap isu integration
    Re: Posting documents from SD to FICA

  • How to configure SolMan for interfacing with SAP Quality Center

    Hello everyone,
    Our company has only recently acquired and activated the permanent license for SAP Quality Center by HP. We would like QC to interface with SAP Solution Manager. My question is how to perform the configuration steps to make the interface work with Quality Center? I need to set up the IMG addon SM_QC_AD, which can be found under the transaction SPRO, but I need documentation on which steps to take and why.
    I am often referred to SAP note 1059350 and/or the configuration guide, but these only say that I should configure the IMG but not how.
    There is a SAP tutor available on the service marketplace, but I think it's rather uninformative.
    Can I find better documentation elsewhere?

    Hi ,
    [Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
    Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf]  also.
    Regards
    Naveen
    Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

  • Winlims interface with SAP

    Hi qm experts,
       Can anybody could explain to me the details of how shall i interface the SAP with winlims in results recording. I hope that you will give my the full details throroughly. Thanks
    Regards,
    Matildo, Edsel F.
    QM Consultant

    This is a pretty broad question.  You must use inspection plans and have workcenter set up for use.  The workcenter must have a QDR system defined for it.
    The QR systems are configured in SPRO.  QM>Quality inspection>Subsystems-->Process Quality Inspection using QM-IDI interface. 
    You might need some help from your BASIS people to complete the config.
    You should ask your WinLIMS vendor for assistance.  They've done it before and should be able to help you.
    Craig

  • Dcs interface with sap pm

    Dear experts,
    can anyone explain me the basic steps and information  regarding dcs interface with sap .
    i want to do this sap implementation for the thermal power station.     i want to generate notifications and work orders when the parameteres of particular equipment crosses its range.
    how the important parameters from the dcs is linked with sap server.  how i can get the data from dcs and pass it to the sap system.
    can anyone give the helping hand.

    Hi,
    You can use XI as a connector instead of ALE to connect mySAP ERP to SAP Business One. The DI API is the connector for SAP Business One.
    The DI API or Data Interface API is part of Business One and the Business One SDK. B1i exists to easily connect mySAP and SAP Business One without typical coding that would be required simply by using XI to connect with SAP Business One and mySAP. B1i contains all of the connections, pre-defined content, message handling and error correction for common business scenarios to connect these to systems. Without B1i, you have to hand code everything. If you are not connecting with SAP Business One, then you may not have a need or requirement to use B1i. There are more detailed whitepapers here from the SAP Business One main page on SDN. You should have a look at those.
    You should have SAP Portal authorisation to access the following info. Go to sevicemarketplace -> smb -> SBO -> Install'n'Updates->Updates->Updates for SAP Business One->SAP Business One Releases prior to 2004->SBO-MYSAP INTEGRAT.TOOLKIT 1.5.
    You can find there an presentation how to Integrate SBO with mySAP via XI (https://websmp203.sap-ag.de/~sapidb/011000358700002285912003E.ppt)
    Thanks
    Swarup

  • SAP Certfied Dev Professional - ABAP System Interfaces with SAP Netweaver 7

    Hi all,
    Has any one here done this certification ?
    SAP Certfied Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0
    Code - P_ABAP_SI_70
    If yes, how has been the value add for you post this certification ?
    Regards,
    Nikhil.

    Hi Nikhil,
    I have not appeared for it but am sure that SAP's professional certification has very much value in the market. The professional level exam not only captures your knowledge but it shows the practical experience as well.
    Regards,
    Subhash

  • SAP certified professional - ABAP system interfaces with SAP netweaver 7.0

    Hi,
    I have one and half years experience in ABAP. I want to do "SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP NETWEAVER 7.0".
    I am currently in U.S and would like to do the certification here. Whom do I need to contact and what are the documents I need to furnish. Please throw some light on the process.
    Thanks,
    Poonam.

    Dear Poonam,
    the "Professional"-Certification is very very hard - during my last Certifcation Exam, all candidates with the Pro-Exam failed (I was so glad I chose the normal certification...)
    Here's how to book your exam:
    Go to [http://www.sap.com/services/education/certification/index.epx|http://www.sap.com/services/education/certification/index.epx] and follow the instructions ("visit the local SAP Education Web site for the country").
    Figure out the exam code for your certification. Example: For the US, there is a downloadable list (PDF) of exams available, called "list of the available certification exams".
    Schedule the exam according to the rules of your region - here is the link for the US:
    [http://www.sap.com/usa/services/education/certification/exam.epx|http://www.sap.com/usa/services/education/certification/exam.epx]
    Regards,
    Klaus

  • SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP

    Hello Experts
    I am Atush Rohan, I have done my "SAP Certified Development Associate - ABAP with SAP NetWeaver 7.0" on 3rd April 2009.
    I want to appear for "SAP Certified Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0". I have about 3 and half years or experience in SAP ABAP. And I plan to give this certificate exam in the coming 6 months.
    Could you please tell me how i apply for this exam, and whether SAP provides the certificate material for the exam "P_ABAP_SI_70". Waiting for a positive reply.
    Regards
    Atush Rohan
    Edited by: Atush Rohan on Jul 30, 2009 1:21 PM

    hi,
    actually you can find your sid on your certificate itself ... your sid will start with SXX .. ok now along with this you will receive an envelope in which there would be an letter where detalis regarding your sid and password for login access in sap market place will be stated... so you can login with that in server market place.... usually you get this along with the certificate and is being provided by the centres authority...   now if you have not received it so you need to contact your centre and tell them to give it to you... if they dont barged then you can ask them for the concern guy's email .... this guy is the one who receives all the documents relating with your certificate .. now this guy is someone from sap labs banglore ...  also if you have not received your id card so you can mail him or tell your centre authority in that case now usually the centre guys take the matters lightly ...
    ok and as far as your certification exams goes i did search the pearson website they really dont have that professional certification for the abap guys but they do have one for functionals and some other....
    ok now you need to approach yout nearest certification centre in that case and simply ask them that you need to appear for level 2 certification also you can contact the sap labs banglore in that case but i know that they are not responding .....
    so in that matter you tell your centre that you need to schedule the certification they will charge you the certification amount and then will  schedule the date..... yes they can do that.
    hope this will surely help you!!!
    thanks & regards,
    Punit Raval.

  • No receiver could be determined while doing SAP ECC Integraion with MDM 7

    Dear All,
    Can you please help me to resolve the following issue.
    We are doing SAP ECC Integration with MDM 7.1 by using MDM PI Adapter.
    Source side we are processing MATMAS.MATMAS05 IDoc and Receiver side we are using MDM PI Adapter to Connect the MDM System.
    I have checked the Configuration by using Test Configuration Wizard, it showing every thing fine there.
    Is it because of any network connection issue at the Target system (MDM) side?
    Plz check the error message for your reference;
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Receiver Determination
    -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>XIServer</SAP:Category>
    <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
    <SAP:P1 />
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:Stack>No receiver could be determined</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    Thanks
    Mahesh

    Hi,
    From error looks like it is not failing at receiver determination step. if you all configurations are fine, then this could be because of system cache refresh.
    Go to Edit mode in your scenario and again save it and activate it. Do a cache refresh and check if it works.
    Regards,
    Shiv

  • How SEM BPS works with SAP BW

    Hi,
    How SEM BPS works with SAP BW.
    how to save planned in SAP BW.
    how to work with the data in Basic cubes and Transaction cubes.
    what is the relation between these two cubes.
    Thanks,
    cheta.

    hi,
    chk the link for BPS
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7c85d590-0201-0010-20b5-f9d0aa10c53f
    Can any body send the material for BPS?
    Authorization for BPS
    Ramesh

  • Swift Net MT-103 Interface with SAP

    Hello all,
    I am having a hard time to understand the concept and reason to use the Swiftnet MT103 (Outgoing Payment).
    1)At what point I will consider MT103 solution versus EDI820 (Outgoing Payment)?
    2)What will be the considerations I need to take place when I am creating the Functional Design of this interface with SAP?
    3)What will be the steps I need to take on the config side?
    4)Do I need to setup inbound interface as well for confirmation once I sent the MT103 file?
    5)DME will be only solution that produce this format?
    6)Please provide me the File structure of MT103?
    I would appreciate your prompt response since I need to represent this to the client.
    Thanks

    Hi
    It is a good practice to know the status of payment file rather than waiting for the bank to call. Yes, if need be, you will need to create an inbound interface.
    Many things would depend on the method of communcation with banks you choose (i.e. direct connection or value added network), which needs to be secure and encrypted. SWIFTnet is a product that SWIFT offers to allow companies to build a single connection to SWIFT net and connect to thousands of banks around the globe. I am not sure whether this is a valid scenario for your project. Obviously, there is a cost implication attached to it.
    If you are using BCM module, you would need to use a format created in Payment media workbench for MT103 and PI to faciliate the file mapping, conversion, encryption and secure transmission to your bank. In this case, you would build an inbound interface for Status/Confirmation from bank into BCM for Batch monitor.
    while if you are not using BCM module, you would map IDOC to MT103. in this case, you would build an Inbound Interface to manage the confirmation message from bank. I have worked on this sort of interface development and developed a report output for users to run.
    Hope that this helps
    taro

  • SAP Certification for  *ABAP  System Interfaces with SAP NetWeaver    7.0*

    Hi Experts,
      I am appearing for SAP Certification in the stream of  *ABAP 
      System Interfaces with SAP NetWeaver    7.0* 
      so as per the syllabus i required the following material,
      BC420,BC425, BC427,BC415,BC417,BIT300,BIT350
      BC401,BC402,BC400, BC430,BC490,ADM325,BC425,NET900,
      NW001,TESA20,TZCAFG,SM001
      so if any body is having the softcopy or any related links of the   
      above  mentioned material
      please send to my following mail ID's.
      <removed by moderator>
      Points Assured.
      Regards
      Praneeth
    Edited by: Jan Stallkamp on Oct 13, 2008 3:30 PM

    Don't ask for copyrighted material!
    Don't publish your e-mail address!
    Don't assure points!
    => this thread will be locked.
    Please read the rules of engagement otherwise you will set your account on risk of being deleted.
    Best regards,
    Jan Stallkamp

  • SAP Certification for   ABAP  System Interfaces with SAP NetWeaver

    Hi Experts,
      I am appearing for SAP Certification in the stream of  *ABAP 
      System Interfaces with SAP NetWeaver    7.0* 
      so as per the syllabus i required the following material,
      BC420,BC425, BC427,BC415,BC417,BIT300,BIT350
      BC401,BC402,BC400, BC430,BC490,ADM325,BC425,NET900,
      NW001,TESA20,TZCAFG,SM001
      so if any body is having the softcopy or any related links of the   
      above  mentioned material
      please send to my following mail ID's.
      <removed by moderator>  at  yahoo dot co in
      Points Assured.
      Regards
      Praneeth
    <THREAD LOCKED. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] to discover why>
    Edited by: Mike Pokraka on Oct 14, 2008 1:25 PM

    Don't ask for copyrighted material!
    Don't publish your e-mail address!
    Don't assure points!
    => this thread will be locked.
    Please read the rules of engagement otherwise you will set your account on risk of being deleted.
    Best regards,
    Jan Stallkamp

  • How to Integrate Portal with SAP OFFICE(Please help me)

    Hello Experts,
    I have doubts on Portal and SAP office..
    Please find the
    1) How to show the document info record(DIS,like cv03n or cv04n) in Portal
    Please let me know the step by step procedure...
    2) After showing the documnet info record(DIS) in the portal,If user clicks on
    original attachmnet of documnet info record(DIS) it shoud show the drawing
    or diagam in the word or any uformat using SAP OFFCIE:
    How to Integrate Portal with SAP OFFICE
    Please let me know the details.
    Please mail me any documents related to this to my mail id
    [email protected]
    Thnaks in Advance
    Preethi DSouza

    Hi Dharani,
    Please check this thread.
    How will do the connectivity with SAP and Non Sap System
    Also ensure you avoid cross-posting. This has been mentioned to you multiple times earlier.
    Cheers,
    Sandeep Tudumu

  • Connectivity between SAP ECC system and SAP BI

    Connectivity between SAP ECC system and SAP BI
    Hi BI-experts!
    I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
    The Loading process is hanging in processing step u201CSERVICE APIu201D.
    The process  in hanging in status "yellow" and then changed after a while to status u201Credu201D.
    [0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
    The following steps within Load process are yellow and then red:
    Extraction (messages): Missing messages
    Missing message: Request received
    Missing message: Number of sent records
    Missing message: Selection completed
    Transfer (IDocs and TRFC): Missing messages or warnings
    Request IDoc : Application document posted (is green)
    Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
    Info IDoc 1 : sent, not arrived ; Data passed to port OK
    Info IDoc 2 : sent, not arrived ; Data passed to port OK
    Info IDoc 3 : sent, not arrived ; Data passed to port OK
    Info IDoc 4 : sent, not arrived ; Data passed to port OK
    Subseq. processing (messages) : Missing messages
    Missing message: Subseq. processing completed
    DataStore Activation (Change Log) : not yet activated
    Question:
    Can some one tell me whether my distribution model or other settings are wrong?
    I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
    Thank you very much!

    Hi Holger.
    this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
    1. check your BI system logical name from the myself source system.
    2. go the ECC and run the transaction sm59
    3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
    4. double click it and edit it now check whether the Target hostname or ip is OK.
    5. In the logon tab check the client number User and password settings.
    Save it and test it with both Connection Test and Remote Logon.
    if every thing work fine i hope your problem will be solved.
    kind regards,
    Zeeshan

Maybe you are looking for