How SAP Risk Management may be interfaced with SAP Strategy Management?

Hello,
Any document, any customer experience around integration between SAP BusinessObjects Strategy Management and SAP BusinessObjects Risk Management would be very appreciated.
Best regards
Jean-Luc

Hi Renaud,
where you able to create your webservice and use it from GRC RM?
If yes, I would be interested in - 'How do i connect SAP RM 3.0 with that web service'
Regards
Holger

Similar Messages

  • SAP Certification for  *ABAP  System Interfaces with SAP NetWeaver    7.0*

    Hi Experts,
      I am appearing for SAP Certification in the stream of  *ABAP 
      System Interfaces with SAP NetWeaver    7.0* 
      so as per the syllabus i required the following material,
      BC420,BC425, BC427,BC415,BC417,BIT300,BIT350
      BC401,BC402,BC400, BC430,BC490,ADM325,BC425,NET900,
      NW001,TESA20,TZCAFG,SM001
      so if any body is having the softcopy or any related links of the   
      above  mentioned material
      please send to my following mail ID's.
      <removed by moderator>
      Points Assured.
      Regards
      Praneeth
    Edited by: Jan Stallkamp on Oct 13, 2008 3:30 PM

    Don't ask for copyrighted material!
    Don't publish your e-mail address!
    Don't assure points!
    => this thread will be locked.
    Please read the rules of engagement otherwise you will set your account on risk of being deleted.
    Best regards,
    Jan Stallkamp

  • SAP Certification for   ABAP  System Interfaces with SAP NetWeaver

    Hi Experts,
      I am appearing for SAP Certification in the stream of  *ABAP 
      System Interfaces with SAP NetWeaver    7.0* 
      so as per the syllabus i required the following material,
      BC420,BC425, BC427,BC415,BC417,BIT300,BIT350
      BC401,BC402,BC400, BC430,BC490,ADM325,BC425,NET900,
      NW001,TESA20,TZCAFG,SM001
      so if any body is having the softcopy or any related links of the   
      above  mentioned material
      please send to my following mail ID's.
      <removed by moderator>  at  yahoo dot co in
      Points Assured.
      Regards
      Praneeth
    <THREAD LOCKED. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] to discover why>
    Edited by: Mike Pokraka on Oct 14, 2008 1:25 PM

    Don't ask for copyrighted material!
    Don't publish your e-mail address!
    Don't assure points!
    => this thread will be locked.
    Please read the rules of engagement otherwise you will set your account on risk of being deleted.
    Best regards,
    Jan Stallkamp

  • SAP certified professional - ABAP system interfaces with SAP netweaver 7.0

    Hi,
    I have one and half years experience in ABAP. I want to do "SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP NETWEAVER 7.0".
    I am currently in U.S and would like to do the certification here. Whom do I need to contact and what are the documents I need to furnish. Please throw some light on the process.
    Thanks,
    Poonam.

    Dear Poonam,
    the "Professional"-Certification is very very hard - during my last Certifcation Exam, all candidates with the Pro-Exam failed (I was so glad I chose the normal certification...)
    Here's how to book your exam:
    Go to [http://www.sap.com/services/education/certification/index.epx|http://www.sap.com/services/education/certification/index.epx] and follow the instructions ("visit the local SAP Education Web site for the country").
    Figure out the exam code for your certification. Example: For the US, there is a downloadable list (PDF) of exams available, called "list of the available certification exams".
    Schedule the exam according to the rules of your region - here is the link for the US:
    [http://www.sap.com/usa/services/education/certification/exam.epx|http://www.sap.com/usa/services/education/certification/exam.epx]
    Regards,
    Klaus

  • How SAP ECC interface with SAP SRM

    Hi all,
    I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM?
    Thanks, best regards,
    Maria

    Dear Maria Bonomo,
    I have gone thorugh the following link and it seems to answer your query: 
    www.sceis.sc.gov/content/dnld/agydir-1B.pps
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • How to configure SolMan for interfacing with SAP Quality Center

    Hello everyone,
    Our company has only recently acquired and activated the permanent license for SAP Quality Center by HP. We would like QC to interface with SAP Solution Manager. My question is how to perform the configuration steps to make the interface work with Quality Center? I need to set up the IMG addon SM_QC_AD, which can be found under the transaction SPRO, but I need documentation on which steps to take and why.
    I am often referred to SAP note 1059350 and/or the configuration guide, but these only say that I should configure the IMG but not how.
    There is a SAP tutor available on the service marketplace, but I think it's rather uninformative.
    Can I find better documentation elsewhere?

    Hi ,
    [Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
    Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf]  also.
    Regards
    Naveen
    Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

  • Dcs interface with sap pm

    Dear experts,
    can anyone explain me the basic steps and information  regarding dcs interface with sap .
    i want to do this sap implementation for the thermal power station.     i want to generate notifications and work orders when the parameteres of particular equipment crosses its range.
    how the important parameters from the dcs is linked with sap server.  how i can get the data from dcs and pass it to the sap system.
    can anyone give the helping hand.

    Hi,
    You can use XI as a connector instead of ALE to connect mySAP ERP to SAP Business One. The DI API is the connector for SAP Business One.
    The DI API or Data Interface API is part of Business One and the Business One SDK. B1i exists to easily connect mySAP and SAP Business One without typical coding that would be required simply by using XI to connect with SAP Business One and mySAP. B1i contains all of the connections, pre-defined content, message handling and error correction for common business scenarios to connect these to systems. Without B1i, you have to hand code everything. If you are not connecting with SAP Business One, then you may not have a need or requirement to use B1i. There are more detailed whitepapers here from the SAP Business One main page on SDN. You should have a look at those.
    You should have SAP Portal authorisation to access the following info. Go to sevicemarketplace -> smb -> SBO -> Install'n'Updates->Updates->Updates for SAP Business One->SAP Business One Releases prior to 2004->SBO-MYSAP INTEGRAT.TOOLKIT 1.5.
    You can find there an presentation how to Integrate SBO with mySAP via XI (https://websmp203.sap-ag.de/~sapidb/011000358700002285912003E.ppt)
    Thanks
    Swarup

  • Swift Net MT-103 Interface with SAP

    Hello all,
    I am having a hard time to understand the concept and reason to use the Swiftnet MT103 (Outgoing Payment).
    1)At what point I will consider MT103 solution versus EDI820 (Outgoing Payment)?
    2)What will be the considerations I need to take place when I am creating the Functional Design of this interface with SAP?
    3)What will be the steps I need to take on the config side?
    4)Do I need to setup inbound interface as well for confirmation once I sent the MT103 file?
    5)DME will be only solution that produce this format?
    6)Please provide me the File structure of MT103?
    I would appreciate your prompt response since I need to represent this to the client.
    Thanks

    Hi
    It is a good practice to know the status of payment file rather than waiting for the bank to call. Yes, if need be, you will need to create an inbound interface.
    Many things would depend on the method of communcation with banks you choose (i.e. direct connection or value added network), which needs to be secure and encrypted. SWIFTnet is a product that SWIFT offers to allow companies to build a single connection to SWIFT net and connect to thousands of banks around the globe. I am not sure whether this is a valid scenario for your project. Obviously, there is a cost implication attached to it.
    If you are using BCM module, you would need to use a format created in Payment media workbench for MT103 and PI to faciliate the file mapping, conversion, encryption and secure transmission to your bank. In this case, you would build an inbound interface for Status/Confirmation from bank into BCM for Batch monitor.
    while if you are not using BCM module, you would map IDOC to MT103. in this case, you would build an Inbound Interface to manage the confirmation message from bank. I have worked on this sort of interface development and developed a report output for users to run.
    Hope that this helps
    taro

  • Esker Interface with SAP

    Hi All,
      My Client want to use Esker for Faxing and Emailing of documents. I have few question regarding this mentioned below :-
    1. Is there any documnet / link to see the steps involved in configuring or developing the interface between Esker and SAP.
    2. Does it require any development/coding effort or its just an RFC connection?
    3. How complex, if there is any interface between Esket and SAP.
    Thanks in advance
    Regards
    Sri

    Hi,
    did you have a look at this page:
    http://www.esker.com/technologies/sap_integration.asp
    it shows a few ways on how you can integrate without any programming with SAP
    is that what you're looking for?
    Regards,
    michal

  • SAP Certfied Dev Professional - ABAP System Interfaces with SAP Netweaver 7

    Hi all,
    Has any one here done this certification ?
    SAP Certfied Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0
    Code - P_ABAP_SI_70
    If yes, how has been the value add for you post this certification ?
    Regards,
    Nikhil.

    Hi Nikhil,
    I have not appeared for it but am sure that SAP's professional certification has very much value in the market. The professional level exam not only captures your knowledge but it shows the practical experience as well.
    Regards,
    Subhash

  • SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP

    Hello Experts
    I am Atush Rohan, I have done my "SAP Certified Development Associate - ABAP with SAP NetWeaver 7.0" on 3rd April 2009.
    I want to appear for "SAP Certified Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0". I have about 3 and half years or experience in SAP ABAP. And I plan to give this certificate exam in the coming 6 months.
    Could you please tell me how i apply for this exam, and whether SAP provides the certificate material for the exam "P_ABAP_SI_70". Waiting for a positive reply.
    Regards
    Atush Rohan
    Edited by: Atush Rohan on Jul 30, 2009 1:21 PM

    hi,
    actually you can find your sid on your certificate itself ... your sid will start with SXX .. ok now along with this you will receive an envelope in which there would be an letter where detalis regarding your sid and password for login access in sap market place will be stated... so you can login with that in server market place.... usually you get this along with the certificate and is being provided by the centres authority...   now if you have not received it so you need to contact your centre and tell them to give it to you... if they dont barged then you can ask them for the concern guy's email .... this guy is the one who receives all the documents relating with your certificate .. now this guy is someone from sap labs banglore ...  also if you have not received your id card so you can mail him or tell your centre authority in that case now usually the centre guys take the matters lightly ...
    ok and as far as your certification exams goes i did search the pearson website they really dont have that professional certification for the abap guys but they do have one for functionals and some other....
    ok now you need to approach yout nearest certification centre in that case and simply ask them that you need to appear for level 2 certification also you can contact the sap labs banglore in that case but i know that they are not responding .....
    so in that matter you tell your centre that you need to schedule the certification they will charge you the certification amount and then will  schedule the date..... yes they can do that.
    hope this will surely help you!!!
    thanks & regards,
    Punit Raval.

  • How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart

    How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by  Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?

    For the detailed list of differences across editions refer this link
    http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html

  • SAP Certified Technology Professional - Platform Technology with SAP NetWvr

    Hello Experts,
    I am planning to give SAP BASIS certification exam at SAP TechEd 2010
    SAP Certified Technology Professional - Platform Technology with SAP NetWeaver 7.0 (http://www.sap.com/services/education/certification/certroles/certificationtest.epx?context=[[P_ADM_SYS_70|G]]| )
    I am already associate level certified with Netweaver 7.0 ( Oracle 10g ) which is a pre-requisite to giving this exam.
    Can you please tell me how to go about the process of enrolling for a TechEd and what will be the approximate price ?
    -Amit

    Hi,
    You just need to have an overview knowledge of the ABAP fundamentals as you mentioned about:
    ABAP Debugging, Business Workflow, ALE/EDI/Idoc, Forms (Smart Forms/SAPScript), Authorization and Roles, Data Migration Transaction Variants,Analytics and Reporting, Foreign Trade (Foreign Trade in ERP, Global Trade Services), Programming in SD.
    You will be able to get basic SAP Help on these topics on SDN or google.
    Foreign trade would include export sales.
    Analytics & reporting would include SAP Query and LIS based reporting(std & flexible analysis).
    ALE/EDI/IDOC would include communication with other systems.
    Forms include output data, you really dont need to know the way it is coded, just std assignment like NACE(output determination), etc.
    Authorization & roles would include segregating responsibilities across different ppl in a big organization.User profile, parameters and other basis related logon objects refere to thi.
    Data migration is uploading and moving of data through BDC & LSMW's from flat files to SAP.
    Programming in SD would be knowledge of SD related tables, user exits/badi's and workarounds(if std config doesnt work).
    All the best.
    Regards,
    Amit

  • SAP Certified Application Associate - Order Fulfillment with SAP ERP 6.0 EHP5

    Hello, SAP friends,
    I make the next month my SAP SD adviser certification (SAP Certified Application Associate - order Fulfillment with SAP ERP 6.0 EHP5). If there is a demo version where I SAP on my calculator instal. It is enough if I have only 8 weeks of access.
    I would be glad about an answer of you very much!
    A lot of fun!

    Still what!! Please, I to you around a link!
    This would be very nice from you!
    See you later!

  • How to make barcode interface with SAP B1

    Hi all,
               I need an interface code to make an interface between barcode printer with SAP B1. i got a scenario from the barcode people. that they are using EPL coding only for Barcode printer print, there they need to run this EPL code in Dos mode, for that .bat file is needed. hope you might got some idea that how a barcode printer is working. now how to make an interface of SAP B1 with Barcode printer.
    how to generate a code which will put the bar code and price with the AP invoice of the item in EPL code which is in a text format. so that by .bat format txt file should be run in dos mode.
    if you have any other process to run the EPL code, kindly send me the details as soon as possible....its very urgent.
    regards
    sandip

    Sandip,
    I think what you may be more concerned about, rather than the printer "language" (ZPL, EPL, etc...) is the symbology that you require for barcodes. Like 3of9, code 128, etc.
    The standard B1 PLD will input a barcode image for whatever field you specify, but only in a couple of symbologies. The Advanced Layout Designer apparently supports a lot more. I have read that it may be requested from you partner, or if on 2007, it is part of the standard install.
    B1 should pass the bar code to the printer, where the printer's language will decode and print it out. Bypass the .bat file, bypass DOS, let B1 do it.
    Is your Epson printer supported under Windows?

Maybe you are looking for