How save factory software on T400 and reinstall after clean install of Windows 7

Hi
I have a Thinkpad T400  2764-CTO Running Vista Business 32-bit  and want to do a clean install to Windows 7 Pro.
Sounds like I can get all the drivers via System Update 4.0, but I'm concerned about how to save/re-install some of the software that came on the machine.
In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?
I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated.
I'm not sure I even know all the stuff that exists from the factory. Anything else I should be concerned about? Thanks! - Kathleen

Please review the HP software and driver download page for drivers/software that are compatible with Windows 7. Also note that there is a BIOS update for Windows Vista that improves the system's ability to function with WIndows 7. Also read "Alerts" and other information regarding this product and Windows 7.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

  • Can I use the same serial number for master suite when reinstalling after clean install of windows 8

    I am reinstalling windows because windows got corupted. I can not access my computer to deactivate the software.  Do I need to be worried about not having deactivated it? I will be reinstalling mastersuite 6 after I get windows 8.1 clean installed on the same computer. I just want to make sure I will not have any problems reinstalling and setting up the adobe mastersuite after I have installed windows 8.1. I don't want to have a problem with the serial number still being registered to my old installation of windows that will have been on the same pc.
    Thanks for your help!

    Your previous activation will still be in the loop, so you should contact Adobe support and ask them to reset your activations.  That way you can be sure you have the two your license allows for.  You can always skip this if you only activated once before but it will leave you with no extra activation should you find a use for a second installation.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • How can I wipe hard drive and do a clean install of Mavericks?

    I have a 2012 MacBook Pro that is terrible sluggish, probably from upgrades and semi-deleted Symantec software. I want to wipe the hard drive and do a clean install of Mavericks. I have all files backed up, and can reinstall software.
    I think there is a way to do this with Disc Utility?  But don't know how.  Advice welcome

    If you have Yosemite installed and want to reinstall it, do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • SLOW and SLUGGISH after clean install PLEASE HELP!

    My Macbook Pro started acting slugggish a few nights ago, and it seemed after a reboot that it ran better, but quickly slowed down.  I ran permissions, disk repair, reset the PRAM the SMC and etc... nothing helped.  I tried to do a Time Machine restore and after 10 hours of SLOW restoration (it still had 70 hours left) i decided to do a CLEAN INSTAL of Yosemite 10.10.
    Same thing, takes over 10 minutes to boot up and i click on something and the beach ball will spin for a minute.
    Disk Utility says everything is OK.... but even the internet is sluggish as if the entire machine is not processing the information fast enough.
    ANY HELP is greatly appreciated as this is on day 4.
    Thanks
    Steve

    CLEAN INSTALL took over 8 hours to complete, as if everything is running in slow mode.
    Also, i ran this app as i see most ask for it.
    Problem description:
    Clean Install - OS very sluggish and slow before and after clean install
    EtreCheck version: 2.1.6 (109)
    Report generated January 17, 2015 at 7:29:07 AM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
      MacBook Pro - model: MacBookPro9,2
      1 2.9 GHz Intel Core i7 CPU: 2-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
      Battery Health: Normal - Cycle count 550
    Video Information: ℹ️
      Intel HD Graphics 4000
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Time since boot: 10:53:5
    Disk Information: ℹ️
      APPLE HDD TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Mac (disk1) / : 748.93 GB (735.15 GB free)
      Core Storage: disk0s2 749.30 GB Online
      HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      Default Browser: Version: 600 - SDK 10.10
      QuickTime Plugin: Version: 7.7.3
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          4% WindowServer
          0% mds_stores
          0% mds
          0% Finder
          0% launchd
    Top Processes by Memory: ℹ️
      258 MB com.apple.WebKit.WebContent
      155 MB loginwindow
      129 MB mds_stores
      120 MB Finder
      69 MB WindowServer
    Virtual Memory Information: ℹ️
      3.55 GB Free RAM
      2.71 GB Active RAM
      1.37 GB Inactive RAM
      961 MB Wired RAM
      2.65 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Jan 16, 2015, 08:36:59 PM Self test - passed

  • How to restore iPhoto and iBooks after clean install?

    I need to do a clean erase and reinstall of Yosemite.  How do I preserve my iPhoto and iBooks content and settings after reinstalling those apps?
    Thanks,

    I am new to Yosemite and to date have not used Time Machine.  I did find another detailed web site that hopefully will answer your questions - Apple  OSX  and  Time  Machine  Tips.  There is a link on that site titled How Time Machine Works its Magic which is very detailed.  The author of the website was a respected member of this community.  He passed away I believe last year.

  • Rescue And Recovery On Clean Install Of Windows XP Service Pack 2

    Hey,
    I have recently purchased a refurbised IBM ThinkPad T40 2373-82M laptop computer. When I received the computer it did not have any recovery partition or recovery CD's that came with it. I then installed my own personal copy of Windows XP Service Pack 2 on the machine and installed drivers and applications individually by downloading them off the Lenovo support website. However, I have attempted to install the latest version of the ThinkVantage Rescue And Recovery Program (Version 4.20) on my computer but I end up with the following error: 'There is not enough free space on the computer to install or upgrade the Rescue and Recovery environment'. When I did a full clean install on the system I deleted all partitions that were on the computer at the time during the Windows XP installation and made a single NTFS partition. There were two 20GB partitions on the hard drive when I bought it, but neither of them were the IBM Rescue and Recovery partition. Could it be possible for me to install this software on my laptop, and make a Rescue and Recovery partition, now and make it the same way it would of been when it left the IBM factory?
    Any help would be greatly appreciated.
    Cheers
    Ash.

    asin123 wrote:
    I hope this solution is easy to follow and helps anyone who has had the same problems as me.
    Thanks for coming back and sharing the solution with others!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Jane
    2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
    I am not a Lenovo Employee.
    I AM one of those crazy ThinkPad zealots!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • Is it possible to restore individual apps and files after clean install of Lion?

    My new iMac is one of the small group that is having HDD drive replaced due to issue with 1TB Seagate drives.
    When I get it back I'd like to install a clean copy of Lion and not restore whole system from TimeMachine. 
    However I don't want to lose my iTune or Aperture Libraries.  Is it possible to restore just these libraries form TimeMachine backup or is there a better way to go?  Email is all IMAP so not an issue, F/Fox & Safari bookmarks and all contacts & iCal material are likewise MobileMe/cloud based so not an issue.
    Just after safest and best solution.
    Thanks

    The short answer is: yes you can restore only these libraries from the last Time Machine backup.  It's quite easy
    1) Clean install Lion
    2) Enter time machine from the menu bar while pressing "option" (Browse other Time Machine disks).
    3) Restore the Libraries.
    Individual apps are tricker - depending on how they were installed in the first place.  Anything that used an installer, and may rely on library frameworks (e.g iwork or MS Office) is not going to work easily with this method.

  • Proper reinstallation of catalog, settings and files after clean installing W7

    Hi,
    I'm clean installing windows 7 (I've had it with Vista) and would like to know what is the best procedure and the logistics involved for the transfer/restoration of my catalog.
    I will have a large, clean secondary hard drive available (being formatted as we speak) to store anything needed before reformatting and installing W7 in my primary drive.
    Here are the specifics:
    I'm using PSE8
    My photos (13,000 pics) are properly organized in folders inside the "Pictures" folder within my User using Vista's default folder structure and would like to preserve this same arrangement under W7 (basically restoring to the Pictures folder in W7.
    I have only one Catalog and is only accesible only to me (as opposed to the "accesible to everyone" option).
    I would also like to preserve my address book and preferences, but don't know where ae these files located.
    My planned windows-related workflow is as follows (suggestions welcome):
    1. Make a simple copy of C: dirve to the 2nd hard drive (about 400GB worth of stuff) just to have an accesible backup of all files.
    2. Use the easy transfer wizard to transfer all windows user's settings and files (from all four users) to the 2nd drive.
    and then use the wizard to restore everything after installing W7.
    3. Do a backup of my PSE catalog using the backup feature of the Organizer. Recent second backup is safely stored off-site.
    4. Do the same for my itunes library (research pending on the proper procedure).
    5. Reformat hard drive and then clean-install W7.
    6. Use easy tranfer wizard to restore files and settings.
    7. Install all programs.
    8. Restore PSE catalog using the restore feature in PSE.
    9. manually copy back the address book and preferences to their proper folders... please tell me where these folders are going to be located
    Questions:
    What is the proper way to do the transfer my photos and Catalog file?
    Should I use the PSE8 backup and restore?
    If so, what will happen with the photos already restored by the Windows wizard? should I delete them and let the PSE restore procedure "legally" restore all my pictures and catalog file? This is my big question.
    I will very much appreciate all your help and sujjestions with this procedure

    can go for PSE back up and restore . It will work for your large catalogs and images

  • Reinstalling PSE12 after clean install of windows 8.1

    I already purchased PSE12 from this site and installed it on this PC, but I just found out that I need to reinstall windows 8.1 (to switch from 32 bit to 64 bit).  Will I be able to use the same license on the computer after I reinstall, or will I need to buy a new copy of PSE?

    Use Help> Sign Out before reinstalling Windows. This will deactivate the software. Be sure you're connected to the Internet when you do this.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • OSX 10.75 Macbook Pro 30 Minute Boot and Slow After Clean Install

    Here is my problem.
    I recently purchased a mabook pro which was dropped with the intentions of fixing the screen.
    I was able to initially install OSX with Internet recovery, then for some reason on reboot the password would not work.
    I was able to fix the password problem, but the extremely slow boot time persists.
    This is a fresh install so I am not sure why it is so slow.
    √
    PMAP: PCID enabled
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    vm_page_bootstrap: 474240 free pages and 41856 wired pages
    kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
    zone leak detection enabled
    standard timeslicing quantum is 10000 us
    mig_table_max_displ = 73
    TSC Deadline Timer supported and enabled
    AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
    AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
    AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
    AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
    calling mpo_policy_init for TMSafetyNet
    Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    calling mpo_policy_init for Sandbox
    Security policy loaded: Seatbelt sandbox policy (Sandbox)
    calling mpo_policy_init for Quarantine
    Security policy loaded: Quarantine policy (Quarantine)
    Copyright (c) 1982, 1986, 1989, 1991, 1993
              The Regents of the University of California. All rights reserved.
    MAC Framework successfully initialized
    using 10485 buffer headers and 7290 cluster IO buffer headers
    IOAPIC: Version 0x20 Vectors 64:87
    ACPI: System State [S0 S3 S4 S5]
    PFM64 (36 cpu) 0xf10000000, 0xf0000000
    [ PCI configuration begin ]
    AppleIntelCPUPowerManagement: Turbo Ratios 6689
    AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
    console relocated to 0xf60010000
    PCI configuration changed (bridge=16 device=5 cardbus=0)
    [ PCI configuration end, bridges 12 devices 18 ]
    mbinit: done [64 MB total pool size, (42/21) split]
    Pthread support ABORTS when sync kernel primitives misused
    com.apple.AppleFSCompressionTypeZlib kmod start
    com.apple.AppleFSCompressionTypeDataless kmod start
    com.apple.AppleFSCompressionTypeZlib load succeeded
    com.apple.AppleFSCompressionTypeDataless load succeeded
    AppleIntelCPUPowerManagementClient: ready
    BTCOEXIST off
    wl0: Broadcom BCM4331 802.11 Wireless Controller
    5.106.198.19
    FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffeea47f4; max speed s800.
    rooting via boot-uuid from /chosen: 47A5C6D9-B884-3C97-9E0B-83613298B969
    Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HTS545050B9A302 Media/IOGUIDPartitionScheme/MacEvans@2
    BSD root: disk0s2, major 14, minor 2
    AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    [IOBluetoothHCIController::setConfigState] calling registerService
    Kernel is LP64
    macx_swapon SUCCESS
    Waiting for DSMOS...
    BCM5701Enet: Ethernet address c8:2a:14:53:09:a2
    AirPort_Brcm4331: Ethernet address e4:ce:8f:07:00:ce
    IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    IO80211Interface::efiNVRAMPublished(): 
    AGC: 3.1.33, HW version=1.9.23, flags:0, features:20600
    SMC::smcHandleInterruptEvent WARNING status=0x0 (0x40 not set) notif=0x0
    Previous Shutdown Cause: 3
    å
    [AGPM Controller] build GPUDict by Vendor1002Device6760
    DSMOS has arrived
    ** Device in slot: SLOT--1 **
    in func createVirtualInterface ifRole = 1
    Created virtif 0xffffff8007b0a400 p2p0
    AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    AppleBCM5701Ethernet:        a        1 extract_link_settings - EEE logic error
    Ethernet [AppleBCM5701Ethernet]: Link up on en0, 10-Megabit, Half-duplex, No flow-control, Debug [794d,0100,0de1,0300,0000,0000]
    Ethernet [AppleBCM5701Ethernet]: Link down on en0
    Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]
    Ethernet [AppleBCM5701Ethernet]: Link down on en0
    Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0321,0de1,0300,45e1,0000]
    en1: 802.11d country code set to 'US'.
    en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165

    So I figured out what the problems was.
    The Hardrive was going bad. I had another hardrive that I knew was good taken from another Mac, I swapped them. With the other drive the computer booted up fine. I later took the drive to the Genius bar and the confirmed what I already knew.

  • Sluggish and Slowness MacBookPro after clean install Mavericks

    Hi,
    My MacBook Pro 2012 become slow and sluggish after clean install Mavericks. I have to longgg waiting for applications to run ( even my old laptop can run Windows faster!! ). Compare I bought this MBP with Mountain Lion , this one is much slower with Mavericks. There are audible harddrive activity.
    I already done with NVAM & SMC reset but still nothing change on performance.
    Hope anybody here can help me since a quite a fews days i keep thinking to resolve this matter.
    Hardware Information:
              MacBook Pro (13-inch, Mid 2012)
              MacBook Pro - model: MacBookPro9,2
              1 2.5 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 1024 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 2:58:42
    Disk Information:
              APPLE HDD ST500LM012 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (480.26 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
    Launch Agents:
    User Launch Agents:
    User Login Items:
              None
    Internet Plug-ins:
              Default Browser: Version: 537 - SDK 10.9
              QuickTime Plugin: Version: 7.7.3
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    3rd Party Preference Panes:
              None
    Bad Fonts:
              None
    Old Applications:
              None
    Time Machine:
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 464.96 GB Disk used: 17.68 GB
              Destinations:
                        WD My Passport [Local] (Last used)
                        Total size: 465.41 GB
                        Total number of backups: 2
                        Oldest backup: 2014-01-31 14:48:18 +0000
                        Last backup: 2014-02-01 07:31:57 +0000
                        Size of backup disk: Adequate
                                  Backup size 465.41 GB > (Disk used 17.68 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   3%          WindowServer
                   1%          EtreCheck
                   0%          imagent
    Top Processes by Memory:
              127 MB          com.apple.IconServicesAgent
              70 MB          mds_stores
              37 MB          mds
              37 MB          WindowServer
              29 MB          Activity Monitor
    Virtual Memory Information:
              2.23 GB          Free RAM
              941 MB          Active RAM
              222 MB          Inactive RAM
              644 MB          Wired RAM
              257 MB          Page-ins
              0 B          Page-outs

    @mamatcyber  @ Linc Davis
    Same issue here I have done clean installs using Super Duper (Back-up All Fresh clean slate...)
    and still Mavericks is getting slower and slower.....
    Using Gimp it now takes 5 mins to export a .jpeg file  500k !
    OSX 10.9.1
    Processor 2.26ghz
    Ram 2gb
    250gb HD  196gbfree
    Even just now I did a clean install and i'm seeing the spinning beach ball with Firefox, and it's slow to opening up volumes.
    This is Ridiculous Apple!

  • How backup/save software installed on T400 before doing clean install of Windows 7?

    Hi
    I have a Thinkpad T400  2764-CTO Running Vista Business 32-bit  and want to do a clean install to Windows 7 Pro.
    Sounds like I can get all the drivers via System Update 4.0, but I'm concerned about how to save/re-install some of the software that came on the machine.
    In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?
    I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated.
    I'm not sure I even know all the stuff that exists from the factory. Anything else I should be concerned about? Thanks! - Kathleen

    "In particular, Intervideo WinDVD and Roxio Media Import. If I go to my Programs folder and copy the folders for Roxio and InterVideo onto a flash drive, and then re-copy into the Programs folder on the C drive after a clean install, does that work?"
    As Maliha said (or implied) that doesn't work.  Just copying installed programs doesn't set up the registry entries or any data folders and files they may use in your user files.
    You might consider copying your entire user directory to large flash or DVD or external hard drive as a way to preserve your personal data and program data files.  Things like Thunderbird mail or Firefox bookmarks are in C:\users\kathleenklein\appdata\... (which may not be visible unless you make them so) and can be plugged back into your Windows 7 install.
    "I've never used Rescue and Recovery on the laptop, and am not sure how it works. Any advice is appreciated."
    First, have you made your factory recovery media?  That ensures that you can revert to factory Lenovo setup if you ever want to.  To give the machine to your little brother, for instance.  It will burn a pair of CDs and one or more DVDs.
    You can/should also use R&R to save a current whole-disk image to external media.  That lets you fall back to your current setup if necessary.  This is likely to be fairly large.  An external hard drive is usually required.  Use advanced R&R to set up the target and start things off.  Once you are sure that Win 7 is going to work for you, you can get rid of the saved Vista image and use the drive for your Windows 7 backups.   You do make backups...
    R&R can't (AFAIK) save your Vista user stuff and restore it to WIn 7.
    Is this a clean install using Lenovo media or is it Microsoft vanilla?  I just did a MS Vanilla 7 install.  Since the service and recovery partitions in the Lenovo Visa drive configuration will be useless in a WIn 7 install (if MS vanilla) I used the advanced option and had the Win 7 install delete all partitions and just do its thing.  It created a small boot partition and used the rest of the drive for C:
    After installing '7, install the latest TVSU and let it pull down the basic/necessary Lenovo drivers and apps.  After that you may choose to install the latest R&R.  Surprisingly, it can be used to make backups even without the Lenovo partitions present.  I've verified that by making a full image and restoring to a bare drive.
    It's handy to Install '7, do a MS update, install TVSU, do a Lenovo update, install R&R and then burn a recovery set of CDs and DVDs so you can rewind to a sort of base-usefull-initially-updated condition should that be necessary.
    As you probably already know, start here for your Lenovo Win 7 downloads: ThinkVantage Technologies Updates
    Likely more or less than you wanted - but you asked
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • How do I back up files and reinstall original disks on my Power Mac G-4 (2000)

    How do I back up files and reinstall original disks on my Power Mac G-4 (yr. 2000). I know that sounds basic but I have very few techno skills. So please "talk down" to me. I had a newer PC (2005) but the hard drive crashed and I am trying to resuscitate this old mac until I can afford to buy a new one. I am in the middle of writing a book (based on Steve Job's life) and must have SOMETHING to write with. Anyone have a better one they can loan me? I am in Maine on the coast. BTW this machine seems to have trouble reading or formatting most CD-disks. Can anyone recommend a type and brand that works well with this model? Thanks for any assistance anyone can render. Here is what I have:
    Machine Name:          Power Mac G4
      Machine Model:          PowerMac3,4
      CPU Type:          PowerPC G4  (2.9)
      Number Of CPUs:          1
      CPU Speed:          467 MHz
      L2 Cache (per CPU):          1 MB
      Memory:          768 MB
      Bus Speed:          133 MHz
      Boot ROM Version:          4.2.8f1

    Why do you want to reformat the drive?  Is it because the machine is running slow?
    Be sure to backup you important files, like the book, daily.
    The cheapest approach would be to try to figure out why the machine is running slow.  Be sure to try safe boot.
    You may want to run these "standard" fixes if the problem persists.
    1) Check the amount of free space on your harddrive.  You should have a several gigs free.
    2) You should run disk utility
          Macintosh-HD -> Applications -> Utilities -> Disk Utility
          a) verify the disk
          b) update your permissions.
    3) Try a safe boot.
         Shutdown your machine.  Hold down the shift key.  Poweron.  Wait awhile; wait awhile while you harddrive
         is being checked.
         http://support.apple.com/kb/ht1455
    4) Another way to correct filesystem problems is into single use mode.
         This page will tell you how to get into single user mode.
         http://support.apple.com/kb/HT1492
        Basically, you hold down the command + s key then  powering on your machine. The command key
        has a little apple symbol on the lower left. It is between the alt/option key and the space bar. 
    4) You may want to run applejack to clean up your machine.
          http://applejack.sourceforge.net/
    6) Run hardware diagnostics.  It's good for a sanity check.
    The older versions of ccc were donationware.
    Here are two utilities for making a complete backup of your internal hard drive.  I've recommend using one of these so that you can create a bootable system  on your external hard drive. ( PPC require a firewire connected drive. )  Once created, you can run your system from the external drive.  Hold down the option key on your keyboard then power on your machine.  This will bring you in startup manager click on the drive image you wish to boot then click on the arrow key to the right.
    "Clone, synchronize, backup. Schedule and forget it."
    http://www.bombich.com/software/ccc.html
    "SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless."
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html

  • How do I uninstall safari 7 and reinstall safari 6 (snow leopard)?

    How do I uninstall safari 7 and reinstall snow leopard? I was on pinterest and it said I needed up to update my browser, so I did and now safari won't open for me since I have 10.6.8. How can I get safari back on my computer? I didn't know that my computer isn't compatible with the new software before I downloaded it and I can't figure out how to uninstall it so I can have my previous version back. Thanks!

    Classic Mac operating systems don't run Safari.  I've asked this thread be moved to the appropriate forum.
    Read this tip to more properly identify your Mac:
    https://discussions.apple.com/docs/DOC-6413
    So we can tell you what will be able to install on it, and what won't.
    Is your data backed up from prior to these installs?

  • My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive.  How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

    My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive.  How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for