How save is this?
i have a AMD 2500+ running at 11x195 (on a msi k7n2 delta-l mobo)
now i want to get a FSB of 200 so i have 11x200
but the problem is that when i go to 197 my pc become unstable (programs giving errors and things like that)
the temps are OK so i think i just have to rise the voltage
. now my question is, how mutch can i rise the voltage, and is it save to do that?
right now my voltage is 1.62 (or 1.65)
thanks
raising voltage is never safe....
it WILL shorten the life of your CPU, the question is... how much will it shorten it...
if you take it to 1.85volts... as long as you keep it somewhat cool, you'll probably end up upgrading before it dies...
Similar Messages
-
Hi, having purchased and installed pages after my 30 day trial had finished I am now unable to save any changes to documents I had created in the trial version. It says I need a serial number, which I never got when I purchased the pages app. Does anyone kno how to rectify this, I would be very grateful for any help as I'm currently writing up my thesis and am now unable
Hi, I had the same problem and I found that you don't need a serial number anymore. Here is what I did:
(1)I went to Applications fodder on my Mac. (You can navigate to the Application folder from 'New Finder Window.')
(2) Deleted Pages (installed as part of the free free trial version) from the Applications Folder. Also deleted 'IWorks' from the Applications folder.
(3) Started AppStore.
(4) Clicked on Purchases.
(5) Clicked on Pages.
(6) Clicked Install.
(4) repeated (5) and (6) for Numbers and Keynote -
I am trying to save a document with the new Pages and it is only saving as a ZIP file anyone know how to fix this or choose a different file type?
Take a look at the FileSelector
First make sure the FileSelector is expanded so you can see the directory and sidebar. That's what the little disclosure triangle up by the filename is for. Once the FS has been expanded to look like the above picture, look to see what subdirectory has been selected. Use the SideBar to select an appropriate one. -
I type notes between therapy sessions and frequently do this in my car without wifi available. I need a way to access PDF files that I can type in and save and be able to AirPrint from when I am connected to wifi at a later time, I currently have these documents saved in Dropbox and open them on my ipad or iPhone in Adobe Reader but don't have a way to save and use offline. I tried iBooks but it doesn't allow me to edit. I need specifics on how to do this please. I bought an ipad to make my mobile work easier but am still using my iPhone for everything because I can't figure how to easily access and edit PDF documents offline. Thanks in advance.
search the app store for PDF Writer. I've found a lot that will convert documents to PDF, but none yet that will write within the PDF. One thing you want to avoid are cloud based apps. Any of them that talk about editing on the cloud, etc, aren't going to be as standalone as you want.
It's possible, if you can take your template PDF, turn it into a word document that you can edit, you can then convert that to PDF...kinda a workaround way to do what you want. And apps that convert to PDF are much easier to find -
There's no good reason Apple removed the ability to manually save. I work in a project, I save it at a point and then make edits that I may or may not want. It could be 1000 changes I make before I see that I'm not satisfied with them and want to revert back to my last saved session. In iMovie not only can I not do that but the autosave doesn't work and has cost me tens of hours!
iMovie just hit me with a bug saying I couldn't share becuase there wasn't enough memory so I have to quit iMovie, open it up again then try to share it. Well, there IS enough memory so I don't know why it was saying that anyway. But besides that, I was afraid to quit iMovie because the **** thing never saves.
I google and find out I can duplicate a project and that should save it. I do that. Restart it. Bam. None of the changes I've spent the past 2 days on saved....
Why has Apple broken their iMovie like this and is there ANYONE that has figured out a way to make projects save?
This is absolutely the last time I'm using iMovie (or any Apple app that removed manual save) but I've done too much editing to start all over again in another video editor. I need to make these changes AGAIN then save them.
How?!Here is all my battery information if that helps for troubleshooting:
Battery Information:
Model Information:
Serial Number: W01305XA8D3BA
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 4767
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 5539
Health Information:
Cycle Count: 112
Condition: Normal
Battery Installed: Yes
Amperage (mA): -2234
Voltage (mV): 11819 -
Upside down pdf file. Rotated and save but still upsided. How to solve this problem?
I received a pdf file that is upside down. Rotated and saved. When I open the file, it is still upsided. How to solve this problem?
Hi,
I think you are rotating the PDFs from View and rotate. it would only change the current View of the PDF.
Kindly click on Tools on the right hand side > Pages > Rotate. then save the PDF.
Let me know if it helps.
~Pranav -
Photoshop CS6 continually shuts down when I save a file I am working on. Any ideas how to fix this?
Photoshop CS6 continually shuts down on me when I go to save a file I am working on. I work primarily in this software, and this continual shut down happens at least 10+ times a day. Any ideas on how to fix this would be greatly appreciated!
Does that happen with that file only or with any other files as well?
Did you try to create a new file and save it?
What error message do you get? Please attach an error screenshot.
Which operating system do you use?
Since when are you facing this issue? Did it ever work before?
What changes did you make after which you are facing this issue?
~ Arpit -
When I log on to Firefox, I get this block that pops up saying, "Do you use the Yahoo! Toolbar on multiple computers? It has 2 buttons asking "Save to my Yahoo! ID or No thanks, just save to this computer" It drops down from the Yahoo toolbar, next to the Y! on the left side of the tool bar. I have tried the Save button and no response, I tried the No thanks button no response. I tried the underlined "Learn more" and it too no response. I tried the close X but that does not get rid of this box. I tried right clicking and no response. It stays there through out while working on the mail, I cannot access the that toolbar so I cannot use the buttons on this tool bar. Please help or I will have to try another browser to see if it go away.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
Problem with an incoming message. For example, during my conversation the second line receives a call, I hear the sound in dynamics such as "piiiip piiiip," but when in this situation I recieve SMS and i hear established melody and I do't hear the person on all over SMS. How to solve this problem? Perhaps someone tell me? save in advance
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I'm using a late 2006 2.33GHz imac.
I clean installed 10.6 from disc then updated to 10.7 from download.
Now every time my computer goes into sleep it won't wake up.
The only way it will restart is to pull the mains lead out of the imac, put it back and try until it will start.
This only happened after reinstalling. Only Apple OS was on the imac and so it must be an issue with the software I believe.....
Anyone know how to cure this problem please?
Thanks
paulThis isn't a fix, more a workaround I used when I had wake from sleep problems that lasted from some point in 10.6.x, through 10.7 and into 10.8 (got fixed for me in 10.8.2). It seems to be connected with Bluetooth failing to wake up properly:
System Preferences>Energy Saver and set 'computer sleep' to 'never'. -
The top picture is what my Desktop 1 looks like. And the picture below is what my desktop looks like after clicking mission control. Ive tried changing wallpapers, changing preferences, etc. and I still can't figure out what's wrong. As you can see, on mission control you can't see any of the open windows, or anything that I have placed on my desktop. Any ideas as to how to solve this issue?
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
When I enable WI-FI on my iphone4 and connect to my network I do not receive emails from my AOL account, however, I receive emails from my corporate outlook exchange account. When WI-FI is disabled I receive emails from each account. Any ideas how to correct this? Thanks in advance.
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back soon. -
Firefox remembers history but doesn't remember closed tabs, sessions.
It happened after updating Fox to v. 19.0.2 on one computer.
In Firefox Options is set Use Custom Settings For History, everything is checked except Always Use Private Browsing Mode. So I am not in private browsing.
When I press on Undo Closed Button nothing happens & in session manager Save Session Button is greyed out. I've tried installing other add-ons that can remember tabs. tried to disable/reinstall these 2 add-ons. Did't help. On my 2nd computer I have same add-ons, same settings and they are working normally. on 3rd computer undo closed tabs works also. How to fix this? I decided to ask before doing Firefox Reset...
Sync is a separate problem. It works, but quite often it logs me out of Sync account. Then I can log in only using long recovery key and password (choosing option I don't have device with me because it does not accept keys for pairing device.)
Thanks for reading.I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :( -
File I/O and figuring out how to get this working
I need to get this code to readi in a file from anywhere, which it does, and then calculate the sentences, words per sentence and syllables per word, this is my code so far
// Standard imports.
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
class WritingFilesWithChooser extends JFrame implements ActionListener {
JButton myButton, myButton2;
JTextArea myText;
// Usual setup stuff goes in here.
public WritingFilesWithChooser() {
Container c = getContentPane();
myButton = new JButton ("Write To File");
myButton.addActionListener (this);
myButton2 = new JButton ("Load from File");
myButton2.addActionListener (this);
c.add (myButton, BorderLayout.NORTH);
myText = new JTextArea (10, 10);
c.add (myText, BorderLayout.CENTER);
c.add (myButton2, BorderLayout.SOUTH);
// Usual main stuff.
public static void main(String args[]) {
WritingFilesWithChooser mainFrame = new WritingFilesWithChooser();
mainFrame.setSize(400, 400);
mainFrame.setTitle("WritingFilesWithChooser");
mainFrame.setVisible(true);
// The actionPerformed for this class is a busy little beaver. It handles
// opening and saving files, trying and catching exceptions, and dealing
// with the chooser dialog.
public void actionPerformed (ActionEvent e) {
// We need these variables for our File IO.
FileWriter base;
PrintWriter out;
FileReader readBase;
BufferedReader in;
String temp;
JFileChooser myChooser;
// We create an instance of JFileChooser, which allows us to use a
// GUI style file manager to choose filenames.
myChooser = new JFileChooser();
// Okay, they've chosen the save button.
if (e.getSource() == myButton) {
// First we show the save dialog, which lets the user specifiy a
// filename to save. If the user clicks 'save', then this if
// condition will evaluate to true and the code within will be
// executed. If they select cancel, then nothing will happen.
if (myChooser.showSaveDialog(this) == JFileChooser.APPROVE_OPTION) {
// There are often exceptions thrown when dealing with file I/O,
// so we need this code to deal with it.
try {
// We create an instance of the FileWriter object using the
// Chooser object. GetSelectedFile of the chooser object returns
// a file reference, and we call getAbsolutePath on that to get
// the full filename, which is returned as a string.
base = new FileWriter (myChooser.getSelectedFile().getAbsolutePath());
// We use the FileWriter object we created above as the base of
// the printwriter object.
out = new PrintWriter (base);
// We grab the text out of our textbox and write it to a text
// file.
out.write (myText.getText());
// When we're done, we close the file.
out.close();
catch (Exception except) {
// This will appear if there is a horrible error. More on this
// in week twelve.
JOptionPane.showMessageDialog (null, "A Horrible Error!");
else {
// First we show the open dialog, which lets the user specifiy a
// filename to open. If the user clicks 'open', then this if
// condition will evaluate to true and the code within will be
// executed. If they select cancel, then nothing will happen.
if (myChooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION) {
// There are often exceptions thrown when dealing with file I/O,
// so we need this code to deal with it.
try {
// We create an instance of the FileReader object using the
// Chooser object. GetSelectedFile of the chooser object returns
// a file reference, and we call getAbsolutePath on that to get
// the full filename, which is returned as a string.
readBase = new FileReader (myChooser.getSelectedFile().getAbsolutePath());
// We use the FileReader object we created above as the base of
// the BufferedReaderobject.
in = new BufferedReader (readBase);
// We read a single line from the file we selected.
temp = in.readLine();
temp.toLowerCase();
String i;
String word;
word = temp;
int nsyl = 0;
int leng = 0;
boolean last = true;
for (int j=0; j<word.length(); j ++)
if(word.charAt(i) = ' ')
leng ++;
for (int k =0;k<word.length(); k++)
if (word.charAt(i) == 'a' || word.charAt(i) == 'e' ||
word.charAt(i) == 'i' || word.charAt(i) == 'o' ||
word.charAt(i) == 'u')
nsyl++;
if (word.charAt(i) == 'a' || word.charAt(i) == 'e' ||
word.charAt(i) == 'i' || word.charAt(i) == 'o' ||
word.charAt(i) == 'u')
last = false;
else {
last = true;
if (word.length(word) == "e ")
nsyl --;
// We clear the textbox, ready for us to dump our goodness into
// it.
myText.setText ("");
// This loop will continue while there are still lines to read.
// When the readLine method gets to the end of the file, it will
// assign the value 'null' to the temp variable.
while (temp != null) {
// While the temp variable isn't null, we append it to the
// text already in the textbox. We add the \n character to
// the end to force a new line.
myText.append (temp + "\n");
// We read in the next line of the file.
temp = in.readLine();
// Finally, we close the file.
in.close();
catch (Exception except) {
// This will appear if there is a horrible error. More on this
// in week twelve.
JOptionPane.showMessageDialog (null, "A Horrible Error!");How about taking a look at the String class. In jdk1.4 and later there are methods such as split() which can
split a paragraph up into sentances. (split(".") ) then can split the sentance up into words (split(" ")). Push
all of the words into a HashMap with an integer indicating the number of times they have occured.
Then run through the HashMap and for each entry search for vowels/sylables/whatever.
This is probably the easiset method of doing what you want but it is limited in the size of file it can parse
efficiently.
matfud -
My wishlist is not working in the app store on my ipad it is woking fine in itunes store so i can add films and music but the icon "add to wish list" is not available on the app store so does anyone know how to fix this
The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
Maybe you are looking for
-
Material Fright Group related Condition record is not captured in billing
Dear all, As i am creating Credit Memo with respect to Credit memo Request (Sales Order) and my freight condition record is maintained in Material Freight Group level. This field is there in Sales Order but when i am creating Credit memo it is not
-
Some recipients receive my images attached to emails, some find they are embedded and difficult to impossible to separate. Just found out that if I remove my attached signature, the problem goes away. How to send images plus signature reliably?
-
Deploy TS to Known & Unknown devices
Is it possible to pxe boot to both known and unknown computers in a domain? I work in a school environment and we have been using WDS to deploy our images. I recently was able to get SCCM up and running in our environment, and created a working TS to
-
Unable to open notification from Order
Hi All, We have created order and created notifications and added to the order in the Objects tab. We are able to open all other notifications in the order, but we can not open one notification. Even this notification we are unable to open with T cod
-
Serious Error when generating UPGRADE scripts
The following runtime service log is generated when we try to generate UPGRADE scripts for a dimension that changed: 14:10:32 [5E3974] Runtime Platform Service Version 9.2.0.2.8 starting 14:10:32 [5E3974] Platform Repository Name OWB_RUNTIME_MGR on S