How scheduler job in HPUX and Data Parameters
Hi guys, is there a way to invoke a PAS procedure from an external scheduler?
Anyone have an procedure example that passes date parameters for the load data procedure?
Thank you,
Rgrds, Vitoriano
Hi Luis,
On how to call PAS procedures you might want to check the following thread: Re: Run procedure in Application Server from the command line
Regarding the date parameters, what are you trying to achive? You can anyway get very good ideas from the wfmde_setup.pro file, used for E&A. There you have some code to turn the actual system date into a PAS parameter.
Best regards,
Ricardo Vieira
Similar Messages
-
How do i reset time and date on my itouch
how do I reset time and date on my itouch?
Go to Settings>General>International and make sure that Calendar is set to Gregorian.
Bext
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.
You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.
-
How do I transfer files and data from my Samsung Galaxy tab 2 to my Macbook Air?
How do I transfer files and data from my Samsung Galaxy tab 2 to my Macbook Air? The Macbook does not even recognize the device. I get an error message. I follow the instructions on the message, which tells me to install "Kies" and Android file transfer. This does not help. What do I do?
See:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
How to avoid the Amount and Date values for VOID Cheques
Hi All,
I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
Can any one tel me how to avoid the Amount and Date values for VOID Cheques
Your help will be greatly appreciated.
Regards
YathishHi,
I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
Regards
Subramanian -
How to get current time and date??
How to get current time and date from my PC time and date to the java application??
i use java.util.* package but got error, that is:
- java.util.* and java.sql.* class are match
- abstract class cannot be instantiated
so what can i do, pls guide...thanks...There is a method in the System class that will return the current system time. You could also instantiate a Date, Time, Timestamp, or Calendar object, all of which get created with the system time by default.
Don't import *. Import the specific classes you need.
Next time, post the actual text of the exceptions/compile errors. If you make people guess, most just won't bother. -
HT1386 how to backup my apps and data before update to iOS5
how to backup my apps and data before update to iOS5
When you update, iTunes will backup your iOS device. You can also do it manually... http://support.apple.com/kb/ht1766
-
Background Processing? how schedule job for "System Error" Message .
Hello everyone,
in sap help i have read.
http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
PCK> Monitoring>Message Monitoring-->Background Processing
you can schedule jobs for various background processing:
● Archiving of messages processed successfully
● Deletion of messages that are not to be archived
● Restarting of messages with errors
● Rescheduling of lost messages
can anyone understand this docu?
give me some introduction, how can i define and schedule these jobs ?
thx in advance!!
best regards
YaningBackground Processing
Prerequisites
You have started the message monitor on the initial screen of the PCK and are in Background Processing.
Features
Archiving
You require two archiving sessions to archive messages:
● One session to write the messages to the archive
● One session to delete the persisted messages that have been archived
To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
Deleting
A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
Thx Aamir.
But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
the situation is like Naveen Pandrangi's WebLog
II. Errors in Adapter Engine [XI : How to Re-Process failed XI Messages Automatically|XI : How to Re-Process failed XI Messages Automatically]
I
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
*how can i schedule a job to automatically restart these messages with errors?
best regards
Yaning
Edited by: Yaning Liu on Aug 18, 2008 1:43 PM -
How to extract the size and date from a given file
Hi,
I want to extract the size and date of a file (it can be either a video, audio or text file) that the user points to the location of. But I am not sure how. Does Java have an api that can do this? If not is there some other way of doing this? Can anyone help? Thanks in advance.Have a look at java.io.File, specifically
public long lastModified()
This format returned (I find) is nasty, so then use java.util.Date (or java.sql.Date, look the same on the surface to me) to format it.
Cheers,
Radish21 -
How do I delete documents and data on the iPhone 5?
I've been seeing responses such as turning it off, so I did. However I didnt change my memory at all and when I found out whats using it up it was message with (saved) next to it. So i deleted some conversations from other contacts, but it barely dropped to like 1 GB. I check and check to see what else is being used up and music I don't have a problem with and I always delete pics and apps, like google drive. Can someone tell me how can i delete even more of documents and data?
gail from maine wrote:
Hey, you said "sorry"! I think that is very nice....
GB
That is certainly a possible interpretation. -
How to get System Time and Date?
Hi, may i know how do i get the System's current Time and Date?? And i need to format them into 2 separate String, that's Time is a String, Date is another String. Pls guide me. Thanks a lot!
What's the problem? The previous example was pretty clear. Just adapt it to your purposes...
Date currentDateAndTime = new Date();
SimpleDateFormat dateFormat = new SimpleDateFormat("dd-MM-yyyy");
SimpleDateFormat timeFormat = new SimpleDateFormat("HH:mm:ss");
System.out.println(dateFormat.format(currentDateAndTime));
System.out.println(timeFormat.format(currentDateAndTime)); -
How to get system time and date with PHP
Dear Mr.Craig,
Thanx a lot. We are running SRM 5.0 (RAMP - Implementation).
My initial requirement is to write a server-side script to display server date and time. Could you give more inside on how to achieve it?
Regards,
Deva.Perhaps that will help.
[code]
<html>
<h1>Access System time and date</h1>
<?
// saprfc-class-library
require_once("saprfc.php");
$sap = new saprfc(array(
"logindata"=>array(
"ASHOST"=>"localhost" // application server
,"SYSNR"=>"00" // system number
,"CLIENT"=>"000" // client
,"USER"=>"bcuser" // user
,"PASSWD"=>"minisap" // password
,"show_errors"=>false // let class printout errors
,"debug"=>false)) ; // detailed debugging information
$result=$sap->callFunction("MSS_GET_SY_DATE_TIME",
array( array("EXPORT","SAPTIME",array()),
array("EXPORT","SAPDATE",array())));
if ($sap->getStatus() == SAPRFC_OK) {
echo "Time: ".$result["SAPTIME"];
echo "<br>Date: ".$result["SAPDATE"];
echo "<br>or<br>";
echo "Server is showing: "
.substr($result["SAPDATE"], 0, 4)
."-".substr($result["SAPDATE"], 4, 2)
."-".substr($result["SAPDATE"], 6, 2)
." and "
.substr($result["SAPTIME"], 0, 2)
.":".substr($result["SAPTIME"], 2, 2)
.":".substr($result["SAPTIME"], 4, 2);
} else {
$sap->printStatus();
$sap->logoff();
?>
[/code] -
How to print file name and date on document
How can we print the file name and date, like in the old days, on a document as a header or footer?
Not the print dialog for iWork but in the app itself. Here is Pages:
Regards,
Colin R. -
How To Include Current Time and Date in Form
Does anyone know how I can include the time and date in the
body of a form mailer? Our system allows the receiver of each
submitted form to copy the body of the form entries and paste them
into either Excel or FileMaker for database building. They would
like to have the time and date also appear somewhere in the
submitted body so they will not have to do a seperate copy/paste of
the time and date seen in the header... I followed the javascript I
found in the Adobe website and included it within the form, but
when I ran a test nothing showed! Here is the form...
Click
Here to see the Form
Thanks for your help! -DCan you not use when the email's timestamp?
Also, in z7's script, beware the common mistakes, if you try
to retype it - .getDate() gives the day of the month (1-31), but
.getDay() gets the day of the week (1-7). To make it more
confusing, .getMonth() gets the month (0-11), so you have to add
one to make it human-readable. The script posted is correct, but I
went round and round with my PC when I tried to do that the first
time! -
How to list column names and data types for a given table using SQL
I remember that it is possible to use a select statement to list the column names and data types of databaase tables but forgot how its done. Please help.
You can select what you need from DBA_TAB_COLUMNS (or ALL_TAB_COLUMNS or USER_TAB_COLUMNS).
Maybe you are looking for
-
Power Mac 5260/100 Open Transport
I can't get Open Transport to work on my Power Mac 5260/100 with 64 MB of RAM running Mac OS 9.1. I have the TCP/IP control panel set to get the IP address using DHCP using the Farallon LC PDS EtherMac NSC 10-Base T ethernet card & I checked use 802.
-
InDesign document as an interactive PDF for mobile devices?
How can I export an InDesign document as an interactive PDF for mobile devices?
-
Photostream is syncing old photos from iPhoto
Photostream is syncing 1000 of random old photos throughout my iPhoto library. Because it is grabbing these 1000 photos it does not sync NEW pictures taken. It supposed to sync the last 30 days pictures, but these pictures are from 2006-2008. All
-
Why can't buy items in game?
Why I can't buy items in my game?
-
I've tried 3 times to install PSE 9 from new disc just purchased from Adobe. No luck. Error message: The wizard was interrupted before Adobe PSE 9 could be completely installed. Your system has not been modified. To complete installation at another t