How secure are the files I upload?

Are the files I load into my adobe account for conversion kept confidential? Could anyone else not authorized by me access these files?

Are the files I load into my adobe account for conversion kept confidential? Could anyone else not authorized by me access these files?

Similar Messages

  • How secure are the documents that are uploaded via the form?

    I am looking to create a form for RFP use and have added a section that allows them to upload documents.  How is this information encrypted or secured?

    Hello,
    apparently, you are concerned that no one can execute a successful right-click, or is that a misunderstanding?
    If not, should we really do that? Thereover you will find a wonderful philosophical discussion at http://webhome.idirect.com/~bowers/copy/copy1.htm
    And by the way there is the misconception that we can protect our graphics, or, or ... With little effort interested people can get to their destination.
    Hans-Günter

  • How secure are the ISL/ISH handlers in WLE 5.0.1

    Hi,
    We are looking at the possbility of allowing clients to connect on to a
    V5.0.1 ISL with no SSL or other form of encryption. The clients would be
    restricted by firewalls to just these two ports. While we don't care if
    they are able to mess up the WLE Domain - we don't want them being able to
    get any other type of access to the machine over these ports.
    Any advice/pointers on how we might evaluate this risk would be appreciated,
    thanks
    Mark

    This question should really be posted in the
    weblogic.developer.interest.weblogicenterprise.
    There is the possibility that the clients could connect to any other
    IIOP-based system since the
    ISL communicates with IIOP. In addition, it is also possible for the
    clients to connect to CORBA
    objects that then do invocations to other things, such as Tuxedo
    applications, other CORBA objects,
    etc.
    Better yet, if WLS is installed behind the firewall, it is possible for them
    to get access to WLS since
    it too is capable of communicating over IIOP.
    Finally, your going to have to "poke a hole" in the firewall to allow IIOP
    traffic through. So unless
    your firewall is IIOP aware and will filter traffic to only allow IIOP
    destine for the ISLs through, your
    probably creating a huge security hole
    Paul Patrick
    "Mark O'Brien" <[email protected]> wrote in message
    news:[email protected]..
    >
    Hi,
    We are looking at the possbility of allowing clients to connect on to a
    V5.0.1 ISL with no SSL or other form of encryption. The clients would be
    restricted by firewalls to just these two ports. While we don't care if
    they are able to mess up the WLE Domain - we don't want them being able to
    get any other type of access to the machine over these ports.
    Any advice/pointers on how we might evaluate this risk would beappreciated,
    >
    thanks
    Mark

  • How large are the files from recording video's?

    I purchased a 8gb model 5th gen and was just wondering if I should go with the larger model because I do plan on shooting some video with it. I currently have about 1.35gb of music that I will be adding to it.
    Do you suppose that around 6gb will be fine for videos?
    Thanks!

    So you are saying that about an hour of recorded video has been about 1gb-2gb?
    That's not bad. I just plan to shoot small amounts of video so it sounds like I am good.
    Thanks for the help!

  • How secure are the repos

    Please read post at following: http://bbs.archlinux.org/viewtopic.php?id=70556
    Thank You

    Cross posting is against the forum rules. Please continue in your other thread.

  • How to get the files in presentation server while uploading?

    how to get the files in presentation server while uploading?
    give me the function module name

    Hi,
    PARAMETERS:  P_FILE LIKE RLGRAP-FILENAME DEFAULT C_PRES.  "Prsnt Srvr
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
      CALL FUNCTION 'WS_FILENAME_GET'
        EXPORTING
          DEF_PATH         = P_FILE
          MASK             = ',..'
          MODE             = '0 '
          TITLE            = 'Choose File'
        IMPORTING
          FILENAME         = P_FILE
        EXCEPTIONS
          INV_WINSYS       = 1
          NO_BATCH         = 2
          SELECTION_CANCEL = 3
          SELECTION_ERROR  = 4
          OTHERS           = 5.

  • I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14.  I have been able to print larger pictures.  I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this?  I need 16x20's

    I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14.  I have been able to print larger pictures.  I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this?  I need 16x20's

    I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14.  I have been able to print larger pictures.  I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this?  I need 16x20's

  • I have a Macbook Pro Apple . My photos are in iPhoto files. How do transfer the file I want to work on onto Photoshop?

    I have a Macbook Pro Apple . My photos are in iPhoto files. How do transfer the file I want to work on onto Photoshop?

    Where iPhoto Pictures are Located and How to Access the iPhoto Library and Picture Files

  • HT4865 How secure are my personal emails and chats using the iCloud if my daughter just synced all our family apple devices to the cloud?

    How secure are my personal emails and chats using the iCloud if my daughter just synced all our family apple devices to the cloud?

    Welcome to the Apple Community.
    http://support.apple.com/kb/HT4865

  • HT4796 Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

    Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

    Hello.  It looks like I recovered all my keywords attached to photos.  What I did:
    First I located all photos without keywords using a metadata search.
    I found that it seemed to be certain groups of photos that had no keywords.  I decided to at least get the main keyword on all of those in a particular group, like Canyonlands. 
    Once I added one of the keywords, the others all showed up magically!  I then went to each group of photos and added the main keyword, and the others came along and attached to the photos.
    Don't understand why this occurred or why it got fixed, since it was so random.  But, I'm glad to have my keywords restored (I had divided flowers by color, etc. so it was a lot of work!)
    Thanks for the discussion and help.

  • File browse : How to keep the file path in the file browse field?

    Hello,
    I have
    1) file browse field called P2_FILE_PATH.
    2) a select list with submit : P2_REGION
    If i upload some file d:\abc.gif , then select some region in the P2_REGION,
    P2_FILE_PATH will become empty. But in the session, i can find the blob value. but not the "d:\abc.gif "
    Using the following script I could capture the value of P2_FILE_PATH in a field
    P2_TEST.
    onload="javascript:document.getElementById(P2_FILE_PATH').value = document.getElementById('P2_TEST').value;"
    P2_TEST contains d:\abc.gif .
    How to retain the file path, though some other field is selected and submitted?
    Thanks in advance.
    Regards,
    Archana

    Hello Archana,
    You can't do what you want because of some HTML security restrictions – nothing to do with APEX. As you found out, You can capture the value of this item. You can't set it. After submitting the page, the browser is the one to clear the item.
    The only workaround is to work with AJAX and not submit the page until the end of the user input phase.
    Regards,
    Arie.

  • How to insert the file name to column

    When user upload the file, in order to avoid the double file name conflict, so I need to  change the file name to something else, but I still need save the former file name to some column to download the file with correct file name, I know how to rename and upload file, but I don't know how to catch the file name and save it to some column when using addt insert transaction?

    Hi,
    As I said earlier, you have to maintain the list of filename's "itemdescr" in different temp file and load it an and when required table instead of checking for round robin functionality. If you are looking forward that oracle sqlldr can able to access the filename as one of the parameter then - it might not possible AFAIK.
    else perform the direct insert on the table from sqlclient.
    - Pavan Kumar N

  • How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is  new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files  from i pod to itunesb

    how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is  new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files  from i pod to itunes......

    Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
    - Senuti - http://www.fadingred.com/senuti/
    - Phoneview - http://www.ecamm.com/mac/phoneview/
    - MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
    - Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
    - Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
    - iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
    - Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
    - 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
    Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
    Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
    Additional information here https://discussions.apple.com/message/18324797

  • I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?

    I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
    HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
    OS X version 10.9.2

    Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
    Now
    Have you tried to repair the disk yet

  • How to print the file name in sap

    Hi All,
    I have requirment like,
    there is a folder in my local system, inside that folder there are 10 Excel file like file1.xls,file2.xls..............file10.xls
    how to print the file name of all these file in SAp like
    file1.xls
    file2.xls
    file3.xls
    file4.xls
    file10.xls
    Appropriate points will be rewarded.
    Thanks in Advance
    Arun kumar

    Hi,
    Still you are facing any problem with this code expalin the problem with details , otherwise close this thread.
    Use Method <b>cl_gui_frontend_services=>directory_list_files</b> to read file names for a given directory
    after reading the files then Use FM : <b>RSPO_SX_OUTPUT_TEXTDATA</b> to create spool from internal table data and print the data.
    <b>sample code :</b>
    data: desktop_dir type string.
    data: ifiles type table of string.
    data: xfiles type string.
    data: count type i.
    data: filepath type string.
    call method cl_gui_frontend_services=>get_desktop_directory
      changing
        desktop_directory    = desktop_dir .
    call method cl_gui_cfw=>flush.
    call method cl_gui_frontend_services=>directory_list_files
      exporting
        directory                   = desktop_dir
    *    filter                      = '*.xls'
         files_only                  = 'X'
    *        DIRECTORIES_ONLY            =
      changing
        file_table                  = ifiles
        count                       = count.
      DATA : x_name       LIKE tsp03d-name,
             x_dest       LIKE tsp03d-padest VALUE 'LOCL',
             x_rows       LIKE sxpcklsti1-body_num VALUE 0,
             x_startrow   LIKE sxpcklsti1-body_start VALUE 1,
             x_pages      LIKE rspotype-pages VALUE 1,
             x_pages_1    TYPE p DECIMALS 2,
             x_rqtitle    LIKE sxpcklsti1-obj_descr,
             x_rqcopies   TYPE i VALUE 1,
             x_rqowner    LIKE trdyse01cm-username,
             x_immediate  LIKE pri_params-primm VALUE ' ',
             x_rqid       LIKE tsp01-rqident,
             i_contents    LIKE  solisti1 OCCURS 0 WITH HEADER LINE,
          x_pages   = 1.
          x_rqowner = sy-uname.
          x_dest     = 'LOCL'.
          x_startrow = 1.
          x_rqcopies = 1.
          x_immediate = 'X' .
          CALL FUNCTION 'RSPO_SX_OUTPUT_TEXTDATA'
           EXPORTING
    *       name                 =   x_name
             dest                 =  x_dest
             rows                 =  x_rows
             startrow             =  x_startrow
             pages                =  x_pages
             rqtitle              =  x_rqtitle
             rqcopies             =  x_rqcopies
             rqowner              =  x_rqowner
             immediately          =  x_immediate
           IMPORTING
             rqid                 =  x_rqid
           TABLES
             text_data            = i_contents
           EXCEPTIONS
             name_missing         = 1
             name_twice           = 2
             not_found            = 3
             illegal_layout       = 4
             internal_error       = 5
             size_mismatch        = 6
             OTHERS               = 7.
          IF sy-subrc <> 0.
    ** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    **         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    Regards
    Appana
    *Reward Points for helpful answers
    Message was edited by: L Appana

Maybe you are looking for