How see who is using or online with OAM dashboard?

Hi
Apps users who have system administrator resp granted,logged into instance and watching OAM dashboard but their sessions is not showing in user monitoring or forms sessions? How to findout from OAM dashboard that who is watching OAM dashboard?

Hi,
OAM dashboard page is not a form so I believe users who are connected to this page will not be listed under the forms sessions page. Please see (Note: 295206.1 - How to Count Total Number of Users Connected to ORACLE Application), there is a pointer about finding the users who are logged into Self Service Web Application.
Regards,
Hussein

Similar Messages

  • How do i see who is using my wifi

    How can I see who is using my airport wifi signal?

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Hold down the option key on your Mac while you double click on the AirPort Extrme icon
    Wireless Clients will be displayed. Click the small arrow next to each client for more details on each connection.
    If you see 5 wireless clients.....and you only have 4 wireless devices.....you may have an univited guest on your network.

  • Can i see who is using my wifi

    can i see who is using my wifi????

    We can't help you, you will need to call a local PC/Mac tech to come in and secure your network, likely they will recommend a newer faster router that has better security and fresher firmware updates.
    Plus they can set your routers channel(s) to be far away from others in the area that might be causing your problems.
    It's a shame but a lot of the older routers were shipped to be easy to set up by the user, but are severly lacking in security so anyone in the neighborhood can use it or hack it.
    Print out my guide and ask the comptuer tech to apply those strick standards to your router or new one, you'll be secure after that.
    Even the Comcast router/modems are insecure now despite enabling WPA2(AES) because they don't use enough random characters and only numbers, which is easy to crack on any computer with a decent graphics card.
    It would take a massive botnet several hundred years to brute force my network.

  • How to see who's using my account on iMessage

    today i was talking to my friend with i meassage and then someone started typing as me please tell me how to see whos using it, and i changed my password but that didnt work.

    It is VERY possible!
    Is this a new cell phone number?
    If someone had it before, they might still have it active in WIFI, even if it's disconnected at the carrier. This has been happening to me, for a while. Ever since my girlfriend got a new number on her LG, the previous owner has been getting messages I am sending. Unless I turn off iMessage, which then forces them to the cell as text (SMS)
    There is NO PROCESS TO FORCE SOMEONE TO STOP USING THEIR OLD NUMBER ON WIFI IMESSAGE
    ON A DISCONNECTED IPHONE!!!!!
    VERY SERIOUS ISSUE!!
    Jobs would be rolling over in his grave if heard this!!

  • Can I set my MiFi up so that I can "see" who's using it?

    I have given several people the password to use my MiFi.  Can I configure the MiFi somehow so that I (from mycomputer) can view who's using it at any given time?  (Like you can view the "map" on networks in a Windows 7 system).  Anybody know--or even know what I'm talking about?

    If you are connected to the MiFi then you can view who is currently connected to it through the Admin website.  See the following steps.
    To view who is connected to the MiFi:
    1. Navigate to http://mifi.admin
    2. Sign into the MiFi with your admin password
      a. The default password is "admin"
      b. The signin box is in the upper right hand corner
    3. Click the LAN tab
    4. Review the Connected Devices list
    The Connected Devices list will show you the IP Address, Hostname (computer name), MAC address and date/time of when that device connected.  You may have to memorize and cross reference with these devices to know which one is which. 
    Note: The Connected Devices list only shows the devices directly connected to the MiFi.  If you are rebroadcasting your MiFi through a router/network extender/repeater then those connections will be bundled and display as one connection to the MiFi.

  • How I get started using voice input with mac mail?

    Just got a new Imac.  have had Apple computers for a long time.  Want to start using voice input with mail.  How do I get started?

    Apple's voice input options are the following:
    Dictation
    This allows you to speak a phrase and have the system enter it as text in any text field, be it a name and address form or a text editor like Pages or Word. The settings for this service are in the Dictation system preferences, and by default you activate it by pressing the Fn key twice in a row and then speak the desired phrase after you hear the bing sounds.
    Speakable Items
    This option allows you to somewhat control the Mac's interface elements by speaking key phrases to the system. This option is enabled in the Accessibility system preferences, and is at the bottom of the listed services. In here you can turn on the service and calibrate it to properly hear your voice, set a "listening key" (similar to the Fn key for Dictation), and then enable various command libraries.

  • Why can't I see who I shared a photo with anymore?

    In the past, if I shared a photo via email I would see the details under info of who I sent the photo to. A great feature to prevent repeats. I can't see it anymore. Where did it go?

    You can see who is host under tecnical details in the call menu, when in a call. For your second request, do you want to se if lets say contact x is calling contact y in your contact list, or if someone is currently in a call?
    For obvious reasons this would have to be an opt in option, which I'm not sure many people want for privacy reasons.

  • How to configure OC4J using RMI/IIOP with SSL

    Any help?
    I just mange configure the OC4J using RMI/IIOP but base on
    But when I follow further to use RMI/IIOP with SSL I face the problem with: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
    p/s: I use self generate keystore which should be ok as I can use it for https connection.
    Any one can help?
    Below is the OC4J log:
    D:\oc4j\j2ee\home>java -Djavax.net.debug=all -DGenerateIIOP=true -Diiop.runtime.debug=true -jar oc4j.jar
    05/02/23 16:43:16 ================ IIOPServerExtensionProvider.preInitApplicationServer
    05/02/23 16:43:38 ================= IIOPServerExtensionProvider.postInitApplicationServer
    05/02/23 16:43:38 ================== config = {SEPS={IIOP={ssl-port=5556, port=5555, ssl=true, trusted-clients=*, ssl-client-server-auth-port=5557, keystore=D:\\oc4j\\j2ee\\home\\server.keystore, keystore-password=123456, truststore=D:\\oc4j\\j2ee\\home\\server.keystore, truststore-password=123456, ClassName=com.oracle.iiop.server.IIOPServerExtensionProvider, host=localhost}}}
    05/02/23 16:43:38 ================== server.getAttributes() = {threadPool=com.evermind.server.ApplicationServerThreadPool@968fda}
    05/02/23 16:43:38 ================== pool: null
    05/02/23 16:43:38 ====================== In startServer ...
    05/02/23 16:43:38 ==================== Creating an IIOPServer ...
    05/02/23 16:43:38 ========= IIOP server being initialized
    05/02/23 16:43:38 SSL port: 5556
    05/02/23 16:43:38 SSL port 2: 5557
    05/02/23 16:43:43 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): getEndpoint(IIOP_CLEAR_TEXT, 5555, null)
    05/02/23 16:43:43 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): createListener( socketType = IIOP_CLEAR_TEXT port = 5555 )
    05/02/23 16:43:44 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): getEndpoint(SSL, 5556, null)
    05/02/23 16:43:44 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): createListener( socketType = SSL port = 5556 )
    05/02/23 16:43:45 ***
    05/02/23 16:43:45 found key for : mykey
    05/02/23 16:43:45 chain [0] = [
    Version: V1
    Subject: CN=Server, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: SunJSSE RSA public key:
    public exponent:
    010001
    modulus:
    b1239fff 2ae5d31d b01a0cfb 1186bae0 bbc7ac41 94f24464 e92a7e33 6a5b0844
    109e30fb d24ad770 99b3ff86 bd96c705 56bf2e7a b3bb9d03 40fdcc0a c9bea9a1
    c21395a4 37d8b2ce ff00eb64 e22a6dd6 97578f92 29627229 462ebfee 061c99a4
    1c69b3a0 aea6a95b 7ed3fd89 f829f17e a9362efe ccf8034a 0910989a a8573305
    Validity: [From: Wed Feb 23 15:57:28 SGT 2005,
                   To: Tue May 24 15:57:28 SGT 2005]
    Issuer: CN=Server, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
    SerialNumber: [    421c3768]
    Algorithm: [MD5withRSA]
    Signature:
    0000: 34 F4 FA D4 6F 23 7B 84 30 42 F3 5C 4B 5E 18 17 4...o#..0B.\K^..
    0010: 73 69 73 A6 BF 9A 5D C0 67 8D C3 56 DF A9 4A AC sis...].g..V..J.
    0020: 88 AF 24 28 C9 39 16 22 29 81 01 93 86 AA 1A 5D ..$(.9.")......]
    0030: 07 89 26 22 91 F0 8F DE E1 4A CF 17 9A 02 51 7D ..&".....J....Q.
    0040: 92 D3 6D 9B EF 5E C1 C6 66 F9 11 D4 EB 13 8F 17 ..m..^..f.......
    0050: E7 66 58 9F 6C B0 60 7C 39 B4 E0 B7 04 A7 7F A6 .fX.l.`.9.......
    0060: 4D A5 89 E7 F4 8A DC 59 B4 E7 A5 D4 0A 35 9A F1 M......Y.....5..
    0070: A2 CD 3A 04 D6 8F 16 B1 9E 6F 34 40 E8 C0 47 03 ..:[email protected].
    05/02/23 16:43:45 ***
    05/02/23 16:43:45 adding as trusted cert:
    05/02/23 16:43:45 Subject: CN=Client, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
    05/02/23 16:43:45 Issuer: CN=Client, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
    05/02/23 16:43:45 Algorithm: RSA; Serial number: 0x421c3779
    05/02/23 16:43:45 Valid from Wed Feb 23 15:57:45 SGT 2005 until Tue May 24 15:57:45 SGT 2005
    05/02/23 16:43:45 adding as trusted cert:
    05/02/23 16:43:45 Subject: CN=Server, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
    05/02/23 16:43:45 Issuer: CN=Server, OU=Bar, O=Foo, L=Some, ST=Where, C=UN
    05/02/23 16:43:45 Algorithm: RSA; Serial number: 0x421c3768
    05/02/23 16:43:45 Valid from Wed Feb 23 15:57:28 SGT 2005 until Tue May 24 15:57:28 SGT 2005
    05/02/23 16:43:45 trigger seeding of SecureRandom
    05/02/23 16:43:45 done seeding SecureRandom
    05/02/23 16:43:45 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): getEndpoint(SSL_MUTUALAUTH, 5557, null)
    05/02/23 16:43:45 com.sun.corba.ee.internal.iiop.GIOPImpl(Thread[Orion Launcher,5,main]): createListener( socketType = SSL_MUTUALAUTH port = 5557 )
    05/02/23 16:43:45 matching alias: mykey
    matching alias: mykey
    05/02/23 16:43:46 ORB created ..com.oracle.iiop.server.OC4JORB@65b738
    05/02/23 16:43:47 com.sun.corba.ee.internal.corba.ClientDelegate(Thread[Orion Launcher,5,main]): invoke(ClientRequest) called
    05/02/23 16:43:47 com.oracle.iiop.server.OC4JORB(Thread[Orion Launcher,5,main]): process: dispatching to scid 2
    05/02/23 16:43:47 com.oracle.iiop.server.OC4JORB(Thread[Orion Launcher,5,main]): dispatching to sc [email protected]7
    05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ClientDelegate(Thread[Orion Launcher,5,main]): invoke(ClientRequest) called
    05/02/23 16:43:48 com.oracle.iiop.server.OC4JORB(Thread[Orion Launcher,5,main]): process: dispatching to scid 2
    05/02/23 16:43:48 com.oracle.iiop.server.OC4JORB(Thread[Orion Launcher,5,main]): dispatching to sc com.sun.corba.ee.internal.corba.ServerDelegate@9300cc
    05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ServerDelegate(Thread[Orion Launcher,5,main]): Entering dispatch method
    05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ServerDelegate(Thread[Orion Launcher,5,main]): Consuming service contexts, GIOP version: 1.2
    05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ServerDelegate(Thread[Orion Launcher,5,main]): Has code set context? false
    05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ServerDelegate(Thread[Orion Launcher,5,main]): Dispatching to servant
    05/02/23 16:43:48 com.sun.corba.ee.internal.corba.ServerDelegate(Thread[Orion Launcher,5,main]): Handling invoke handler type servant
    05/02/23 16:43:48 NS service created and started ..org.omg.CosNaming._NamingContextExtStub:IOR:000000000000002b49444c3a6f6d672e6f72672f436f734e616d696e672f4e616d696e67436f6e746578744578743a312e30000000000001000000000000007c000102000000000c31302e312e3231342e31310015b3000000000031afabcb0000000020d309e06a0000000100000000000000010000000c4e616d65536572766963650000000004000000000a0000000000000100000001000000200000000000010001000000020501000100010020000101090000000100010100
    05/02/23 16:43:48 NS ior = ..IOR:000000000000002b49444c3a6f6d672e6f72672f436f734e616d696e672f4e616d696e67436f6e746578744578743a312e30000000000001000000000000007c000102000000000c31302e312e3231342e31310015b3000000000031afabcb0000000020d309e06a0000000100000000000000010000000c4e616d65536572766963650000000004000000000a0000000000000100000001000000200000000000010001000000020501000100010020000101090000000100010100
    05/02/23 16:43:48 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0) initialized
    05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.ConnectionTable(Thread[JavaIDL Listener,5,main]): Server getConnection(119e583[Unknown 0x0:0x0: Socket[addr=/127.0.0.1,port=1281,localport=5556]], SSL)
    05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.ConnectionTable(Thread[JavaIDL Listener,5,main]): host = 127.0.0.1 port = 1281
    05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.ConnectionTable(Thread[JavaIDL Listener,5,main]): Created connection Connection[type=SSL remote_host=127.0.0.1 remote_port=1281 state=ESTABLISHED]
    com.sun.corba.ee.internal.iiop.MessageMediator(Thread[JavaIDL Reader for 127.0.0.1:1281,5,main]): Creating message from stream
    05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, handling exception: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
    05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, SEND TLSv1 ALERT: fatal, description = unexpected_message
    05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, WRITE: TLSv1 Alert, length = 2
    05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called closeSocket()
    05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.ReaderThread(Thread[JavaIDL Reader for 127.0.0.1:1281,5,main]): IOException in createInputStream: javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
    05/02/23 16:45:14 javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
    05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.d(DashoA12275)
    05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.AppInputStream.read(DashoA12275)
    05/02/23 16:45:14 at com.sun.corba.ee.internal.iiop.messages.MessageBase.readFully(MessageBase.java:520)
    05/02/23 16:45:14 at com.sun.corba.ee.internal.iiop.messages.MessageBase.createFromStream(MessageBase.java:58)
    05/02/23 16:45:14 at com.sun.corba.ee.internal.iiop.MessageMediator.processRequest(MessageMediator.java:110)
    05/02/23 16:45:14 at com.sun.corba.ee.internal.iiop.IIOPConnection.processInput(IIOPConnection.java:339)
    05/02/23 16:45:14 at com.sun.corba.ee.internal.iiop.ReaderThread.run(ReaderThread.java:63)
    05/02/23 16:45:14 Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
    05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.InputRecord.b(DashoA12275)
    05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.InputRecord.read(DashoA12275)
    05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
    05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA12275)
    05/02/23 16:45:14 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
    05/02/23 16:45:14 ... 6 more
    05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.IIOPConnection(Thread[JavaIDL Reader for 127.0.0.1:1281,5,main]): purge_calls: starting: code = 1398079696 die = true
    05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called close()
    05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called closeInternal(true)
    05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called close()
    05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called closeInternal(true)
    05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called close()
    05/02/23 16:45:14 JavaIDL Reader for 127.0.0.1:1281, called closeInternal(true)
    05/02/23 16:45:14 com.sun.corba.ee.internal.iiop.ConnectionTable(Thread[JavaIDL Reader for 127.0.0.1:1281,5,main]): DeleteConn called: host = 127.0.0.1 port = 1281

    Good point, I do belive what you are referring to is this:
    Any client, whether running inside a server or not, has EJB security properties. Table 15-2 lists the EJB client security properties controlled by the ejb_sec.properties file. By default, OC4J searches for this file in the current directory when running as a client, or in ORACLE_HOME/j2ee/home/config when running in the server. You can specify the location of this file explicitly with the system property setting -Dejb_sec_properties_location=pathname.
    Table 15-2 EJB Client Security Properties
    Property Meaning
    # oc4j.iiop.keyStoreLoc
    The path and name of the keystore. An absolute path is recommended.
    # oc4j.iiop.keyStorePass
    The password for the keystore.
    # oc4j.iiop.trustStoreLoc
    The path name and name of the truststore. An absolute path is recommended.
    # oc4j.iiop.trustStorePass
    The password for the truststore.
    # oc4j.iiop.enable.clientauth
    Whether the client supports client-side authentication. If this property is set to true, you must specify a keystore location and password.
    # oc4j.iiop.ciphersuites
    Which cipher suites are to be enabled. The valid cipher suites are:
    TLS_RSA_WITH_RC4_128_MD5
    SSL_RSA_WITH_RC4_128_MD5
    TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA
    SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA
    TLS_RSA_EXPORT_WITH_RC4_40_MD5
    SSL_RSA_EXPORT_WITH_RC4_40_MD5
    TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA
    SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA
    nameservice.useSSL
    Whether to use SSL when making the initial connection to the server.
    client.sendpassword
    Whether to send user name and password in clear form (unencrypted) in the service context when not using SSL. If this property is set to true, the user name and password are sent only to servers listed in the trustedServer list.
    oc4j.iiop.trustedServers
    A list of servers that can be trusted to receive passwords sent in clear form. This has no effect if client.sendpassword is set to false. The list is comma-delimited. Each entry in the list can be an IP address, a host name, a host name pattern (for example, *.example.com), or * (where "*" alone means that all servers are trusted.

  • How to connect Already created WebI reports with Xcelsius Dashboards

    HI Experts,
    My requirement it to bring data from already in use WebI reports to a consolidated Dashboard. I am aware of connecting universe with Dashboard with the help of QaaWS.
    Is there is any other way that we can connect our dashboard?
    We are thinking to publish those dashboards on the SAP Enterprise BI Portal.
    Thanks in advance!!!
    Edited by: BIBO_Apprentice on Aug 13, 2011 7:40 AM

    Hi,
    One can connect WebI reports with Xcelsius dashboards in 3 ways:
    1. Using QaaWS : connects universe with Dashboard. Dashboard uses the WSDL link to get data that works on SOAP (that works on exchanging web structures).
    2. Using Live Office Connection: With the help of Live Office one can connect the WebI reports directly. One can take advantage of the scheduled instances of the WebI reports. So it is good for time consuming reports.
    3. Using BI Web Services: Here custom web services are created of intended report instances. Publication is done from CMS side.
    after that WSDL is used as any other web services.
    Get back if you need any further clarification.

  • How do i see who is using my airport extreme

    Looking for help in determining who is connected to my airport extreme and can I monitor their activity?

    First, download and install AirPort Utility 5.6 which will contain the features you need. It is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion. As I recall it installs on Lion without complaint.
    This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
    Download Pacifist here: http://www.charlessoft.com/
    Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
    After you get AirPort Utility 5.6 installed and running, come back and read the following.
    I don't know of a better solution than to use Airport Utility - click Advanced, > Logs and Statistics > Logs. You will see the MAC addresses of the devices connected to your Airport. They're cryptic, but if you familiarize yourself with the MAC addresses of all your devices it's easy to spot an intruder.
    MAC addresses are almost always printed somewhere on the exterior case of network devices. Keep a list of them in a convenient place.
    "Monitoring activity" is more of a challenge. Depending on exactly what you want to monitor, you would need third party software to do that... I recall hearing about a program called Net Nanny so search for something like that.

  • How can I see who made my Macbook Pro with Retina Display screen?

    Hello,
    I've read that the LG display burns into the screen. I've done the thing in Terminal "ioreg -lw0 | grep IODisplayEDID | sed "/[^<]*</s///" | xxd -p -r | strings -6" and all it says is Color LCD. Am I doing something wrong? Or does it not say?
    Thanks

    Hello again. Just to be clear, I want to know how to find out if Samsung or LG made my screen.
    Thanks again!!!

  • How do I exactly use Apple Watch with iPhone?

    In iOS 8.2's Apple Watch app, the iPhone must be connected to Wifi or Cellular Data and Bluetooth. They must be connected to pair with the Watch. Lets say I've paired the Watch. If I disconnect the Wifi or Cellular Data, will the Apple Watch stop pairing?
    How ow will I get phone calls and messages on the Watch?

    You could see if the specialists who should know about this product
    as it becomes available to pre-order, can give you the answers direct.
    Since this is a user-to-user discussions area for a variety of technical
    questions, and that is a new product nobody in the wild has yet, they
    should be able to answer. Note this web page has a link within to Chat
    with people who are knowledgeable before you advance purchase one.
    •Chat with a Specialist
    Get all your Apple Watch questions answered
    http://store.apple.com/us/watch
    or get help finding the right watch. Call 1-800-MY-APPLE
    Outside of the US you may have to look into the Apple online store
    for your location to inquire of availability, if or when, you may order.
    Hopefully this helps.
    Good luck & happy computing!

  • How to restore iCal using Time Machine with Lion OS

    Just got off the phone with Apple Support.  With Lion, your User/Library/Calendar file is now hidden.  Here is how to find it in order to restore data to your iCal.
    Close iCal
    Open FINDER
    Use “GO” button located across top
    Hit and hold the OPTION key on your keyboard
    You’ll see LIBRARY appear in the list  (this is a hidden file you cannot see otherwise)
    Select LIBRARY
    Select CALENDAR
    (you can see all the .calendar files under this item)
    Open/Enter TIME MACHINE
    Go to day/time you want to restore back to
    Highlight the CALENDAR file (which can now be seen by virtue of your efforts above)
    Select RESTORE from Time Machine
    Open iCal to view the updated data.

    Hello,
    I've got a dumb question - I've tried this a number of times.  You have given the clearest directions that I've read so far.  However, after trying a number of different dates, it still will not populate.  Most of my calendar entries were done with an iPhone, then synced via iCloud to laptop.  Would that prevent them from being synced to the Time Machine?  I'm at a loss (in more ways than one).
    Either way, thanks for the help.
    Pat
    Message was edited by: pmrose

  • How do I setup useful shared contacts with Exchange OWA Outlook 2013

    Hi There,
    I have a non profit I'm helping out. They have Exchange 2013 Sp1 & outlook 2013 .
    How can I setup shared contacts for Outlook and OWA users?
    I have been struggling to setup a useful shared contacts folder. No Matter what way I do it there seems to be major shortcomings.
    They have 1 "Shared" mailbox account [email protected] and many user accounts [email protected]
    I first imported the contacts from csv into a contacts folder in the info@ account, which works great for the Info@ user. When I share the folder with other users they can see it listed in "People" in full Outlook, but if they're addressing a message
    they can't see the contacts when they hit the TO button. If I look at the properties of the Info@ Contacts folder in the folder list of the User, the Outlook Address Book tab is missing. Also can't find any way in OWA for User@ to open the shared contact folder.
    I also tried using Public folders to share the contacts but found problems there too. Using Full desktop Outlook, users can share contacts, add to their Outlook address book etc. Great, but... there's no way to access Public Folder Contact folders in OWA.
    They're a fully volunteer organization so many people are using OWA from home, they're not IT people so it needs to be easy. 
    Is there something I'm missing, when I started out on the task I thought it would be simple. Its hard to believe after all this time MS hasn't addressed these major shared contact shortcomings.
    Thanks for any help!

    I decided to go with a mixed solution.
    Not every member has a society email account, only the executive and key volunteers have society exchange email accounts.
    I imported the society member list into the the GAL, this allows any society mail users to email other members easily 
    I then imported the larger marketing list into the shared mail account which is restricted to a few users. They can be shared from there to other users, but they can only access those shared contact from Outlook (not OWA)
    It's not ideal as OWA users cannot access the contacts from the Shared Mailbox but they can at least find other members addresses easily. 
    It looks like I could also setup a new GAL and share it with only some users, haven't dug too deeply into this yet.  
    Thanks for your help Ed

  • How can I print using only black with the Lexmark Z810?

    Mac OS X 10.6.8
    Print Using 810 Series driver
    Printer Driver Version: 10.6.4
    I want to print using only the black cartridge.  I'm out of color ink.  However, I see no option to print using black only.  Consequently, when I print a document, only the parts of it that are black with show up on the paper.  Anything that has another color will not appear on the page.  Is there a solution to this problem?

    Print Options can be hard to find and sometimes seem to change locations depending on OSX version or printer model.  Here is where it is on the print dialog on my mini with HP printer.

Maybe you are looking for