How select all photos in folder including stacks?

How can I select all of the photos in a folder or colliction including all of the photos in stacks? The only way I have found so far is to expand the stacks but that takes a lot of time. Thanks.

You are correct, the stacks have to be expanded. However, if you right-click on one of those little stack numbers you'll see that one of the options is to expand all stacks. Not really time-consuming at all.

Similar Messages

  • Lightroom 1.1 crashes when selecting all photos in folder - CTRL + A

    Everytime I try to select all thumbnails in Library mode, using CTRL + A, lightroom crashes and the send msg to Microsoft comes up.
    MichaelM

    John,
    I don't have a count of actual imported images.
    I do know I have about 27,000 images on the drive, but they were all in PSE 3, 4, and 5, and have not all been imported into LR, until I need to view or work with them.
    The machine has 1GB of ram and my files are stored on a 300 GB partition of a 500 GB drive. My C: drive (for temp Win files has about 7 GB free. I am using XP Pro.
    The problem has been very consistent in 1.1 and never occurred in 1.0, that if I select a group of images in thumbs or filmstrip, it crashes LR.
    I will have to add up the folder counts. I can also get you the size of the database. I'm at work now so I will have to reply later in the week. I'm going to a new england photo conference/seminar in Mass. This Fri for 3 days (NECCC, http://www.neccc.org/) so I have to get all my work done.
    Thanks,
    MichaelM

  • I created folders in iphoto on my imac, synch using itunes and selected all photos from iphoto but those albums don't show up...most my albums do but a few don't!??

    I have a new iMac and I'm a new mac user....I have an iphone5..and ipad2.
    I have created folders on the imac in iphoto.
    I am synching the ipad and iphone with mac using itunes...selecting all photos, 3,500+ and although all the pictures may be sharing on all devices, the folders aren't.
    I have created several folders and copied pictures into those folders and they look fine while in iphoto....but I can't get the to synch into ipad and iphone using itunes.

    Folders in iPhoto do not contain photos. Albums and Events do. Folders can contain albums, but not photos on their own.
    So, do you mean Albums?

  • How do you select all in spam folder of yahoo mail classic?

    I just upgraded to Mountain Lion and discovered there is no 'select all' tab for Yahoo classic mail. There has to be a way to delete all the junk mail without having to check each message individually.Please tell me the secret! 
    Thanks, in advance.

    FYI, I discovered that the problem is with Safari 6.0.1. When I log into my Yahoo mail account with Firefox, both the 'select all' tab and the checkbox at the far left in the 'From' / Subject' header above your e-mail list are present. I checked with my son who is still running Lion, and all of the above information is in his Yahoo account. The Safari he has installed is 5.7.1.
    I wonder what other anomolies I will find.
    Apple if you see this, how about fixing this in your next Safari update?

  • How to select all photos placed in a photo book?

    Dear friends,
    while I can easily show only unplaced photos in the browser of an Aperture photo book it is hard to select just the ones that are used in the book. This would be handy to tag all used photos after finishing on the book or to export just thos photos as a backup.
    Any help?
    Thank you!
    007_checker

    Interesting, it would seem there would be a way to show all images used just as there is a way to show all images not used but I can;t seem to find a single button solution.
    What you can do is:
    Make sure no images are flagged, that is the Flagged album is empty. (you could use something other then flagged for this such as label color but flagged is easiest to explain)
    In the book before placing any images select all images and flag them.
    Now make your book.
    When you are done adding images to the book switch the browser to show images not in the book. Select all the images show and remove the flag.
    What is left in the Flagged album are the images in the book.
    This is a bit of a kludge and as I wrote it seems there should be a one button solution (there might be I don't use books much).  You might want to send feedback to Apple suggesting this feature. See Aperture->Provide Aperture Feedback.
    regards

  • Can't select all photos hen importing

    HI
    i can't select all the photos that i have taken to import.  Most of them i can select but some it won't let me tick the box to import?
    Any advice would be much appreciated as i need to edit the wedding photos.
    Thanks Adam

    this is the problem i haven't already imported the photo as it is straight from the camera (on the memory card)
    I have been using two cameras so maybe its got confused?
    Thanks Adam

  • "all photos" album not including all photos. Causing some photo not to be uploaded to iCloud Photo Library

    After updating to iCloud photo library (iPhone 5, iOS 8.1), if I look at my "photos" tab I see over 700 photos, but in the  'all photos' album I only have 420. This results in only 420 of the photos uploaded to iCloud Photo library and not clearing much space off of my iPhone.

    The FAVOURITES and PANOS albums also sort by date and time too. So all the albums sort by time and day except the ALL PHOTOS album! Seems very strange! What's even odder is that the date range listed at the top of the ALL PHOTOS album would suggest that they are sorted by date!
    Apple I hope you SORT this out soon

  • Is there a way to select ALL photos in iCloud to download them to PC? Having to select them one at a time is ridiculous.

    iCloud storage is almost full and I am trying to clear out all the pictures by putting them onto my PC. I have not been able to just select all of them at once. Then I have to go back and select each one again to delete. This is super tedious and time consuming. There has to be an easier way! Please help.

    Select the first top one, press and hold shift key and then select the last one.
    Just like selecting files on explorer.

  • How get all photos from photo streams without iPhoto

    Hi to make A long story short, I lost a Hard Drive with iPhoto on it... Including all my baby's pics ... However I can still see them in the photo streams on my idevices.. First off without that Mac how can just grab all the photos off photo stream without iPhoto?
    Secondly, if I can install iPhoto on another machine or drive will that help or hurt me? Will all the photos show up under my Apple ID and can I just copy them or am I running any risk of deleting the streams?
    Is my only option to copy photos from photo stream a few at a time? And does that not repush them back up to the stream and erase older photos?
    Thank you for any help!!
    Yes I know I am a complete idiot for not backing up or using online backup service... 

    If you create a new library on another Mac, set its Photo Stream preferences to
    and log into your iCloud account on that Mac and enable Photo Stream,  the Photo Stream photos will automatically be imported into the new library. It can take a while depending on how many photos are in the stream.
    When you're done log out of your iCloud account and copy the library to a flash drive or DVD (if small enought) till you get your new drive. 
    OT

  • Selecting "All Photos" shows all photos in catalog except one. Why?

    This is a quirk I've been noticing for a couple years now. It doesn't cause me any problems, so I don't worry about it much, but I am curious.
    If in Library mode I click "All Photographs" in the upper right, then turn off all filters, then hit CMD-D so that no photos are selected, just above the filmstrip, in the lower left corner of the screen, I read:
    "All Photographs [X-1] of X photos"
    where X is the total number of photos in my Catalog. For example, right now, it reads "11090 of 11091 photos." If I were to import another 50 images, it would read "11040 of 11041 photos."
    It's been this way for a while, like I said. And I guess it doesn't make much difference. I do sometimes wonder, though, if there's some mysterious ghost photo in there somewhere, that's not displaying for some reason. Any clue what's going on here? Thanks.

    In the menu bar, try Photo>Stacking>Expand all Stacks, i.e. it's possible that you have one stack collapsed.

  • HT4236 I selected 'all photos' for syncing and nothing happens

    When i try to sync my iphone 3GS, 32 GB, half full.  it only syncs 905 of 2555 photos.  All are selected and i get an error message that such and such a number of photos will not sync see itunes.
    Where do i look for the message on the sync, and how can i sync ALL my photos?

    Hi there PaulFR,
    You may find the troubleshooting steps in the article below helpful.
    iTunes: Unable to sync photos
    http://support.apple.com/kb/TS3697
    -Griff W. 

  • How to browse photos in folder

    Is there a way to browse photos in a folder (without importing them all locally) that is being shared across the network? This is simple in Windows but I haven't found anything on the Mac.

    Steve had a good suggestion but for some reason, his post doesn't show up. I get this error when clicking the email link:
    Error: you do not have permission to view the requested forum or category.
    Steve suggested using Preview to browse across the network. Yes - you are correct on this and that's what I'm doing. Problem is that you can't view multiple photos without lots of little preview windows and right clicking. I'd like something like Windows (Vista) Explorer Preview. You right click a photo, Preview and arrow through them at full size. Very nice. No importing malarky.

  • Problems selecting all photos in album

    Ever since I installed that last software, I haven't been able to figure this out. I followed the tips on tutorial - and used command A, but I still can't get all of the pictures, so that I can order photos...
    I'd love someone to walk me through it!!
    Mac mini   Mac OS X (10.4.6)  

    I still can't get all of the pictures<<<</div>
    If you're unable to select more than one at a time, the problem is, believe it or not, the absence of the Helvetica font!
    http://docs.info.apple.com/article.html?artnum=107942

  • HT204022 Can I select ALL photos?

    in photo stream or share and then delete them all at once?

    Hi David,
    One way you can do it is to create a Smart Album, and make the conditions = Photo Is Flagged. That will put all of your flagged photos into a single album. Then you can export that Album to the Flash Drive via File>Export. Once you set up the Export the way you want it, and then click on "Export" it will bring up your Finder Window, allowing you to select the Flash Drive to export to.
    Hope this helps!
    Cheers,
    GB

  • How Select All Text Objects with Specific Contents and Move to Top-Center?

    Mavens,
    In a ~230 page InDesign CC Book (9 INDD files), on about ~35 pages, there is a small text block with the word "NOTES."
    Currently, the NOTES text block is in the Middle-Center of the page. I would like to find a way for InDesign to move all ~35 instances of the NOTES text block to the Top-Center (of the page each text block is on).
    Is there an easy way to do this with Edit --> Find/Change?
    Thanks!

    Probably not.
    That text block really belongs on a master page applied to those 35 pages, and if it is, all you have to do is move it on the master page. If it isn't, you've got some work to do. Probably easiest to fix one, then coy it and use Paste in Place on the other pages, and delete the frame that's in the wrong place.

Maybe you are looking for

  • Issue with Submitting a ALV report in container ...

    Hello Gurus, I know how to display data in ALV in container on screen. My issue is, I have a container defined on screen. I have a separate report whose output is in the ALV form. Now if I submit the report in the PBO, I do not get the ALV output of

  • Display pass or fail in Report based on return value

    Hi, I'm trying to integrate TestStand with TestComplete using the ActiveX/COM server adapter.  I have the COM setup so that TestStand can call a test in TestComplete and have TestComplete return a string value (true|false) to TestStand. Now I need to

  • How do you deregister Essbase from HSS 11.1.1.3 ?

    Hi, How do you deregister Essbase from HSS 11.1.1.3 ? We have Planning 11.1.1.3's Essbase security externalized to HSS. However, when we run CSSexport.bat, we do not see Essbase security exported. (CSSexport did export all other security). CssExport

  • Playlist folders keep opening

    I just installed iTunes version 11.1.2 on my Mac.  Since I have done that, my playlist folders keep opening up when I do a search for a song.  I have 225 playlists, and have them broken down into 5 folders -- playlists 1-50, 51-100,etc.  Normally, I

  • OWSM 11g: oracle/wss10_x509_token_with_message_protection_service_policy

    Hi All, I have attached the following policy to a SOAP based endpoint. As per the documentaion i need to ensure that the Authentication Provider in the Weblogic Server provides X.509 callback information. How is this supposed to be done? In case anyb