How send video more than one minute via what's up

Hi,
I haven't tried but u can follow the below approach.
popupBean1.setParameters("pItemID={@ItemID}&deptNo={@Deptno}")
Regards,
Gyan

Similar Messages

How to control more than one instrument via different interfaces at the same time

Hi, I am new to Labview. I am working in a project where I have to make a Automated testing tool . So, here is the set up - I have a Chip on a board to which there are several instruments connected namely Agilent power supply, Agilent pattern generator, oscilloscope,Dmm and Thermotron. All these instruments will be connected to the host computer via ethernet, GPIB or RS232. I have to write a program on Labview where the program should be able to communicate with these instruments at the same time and show the ouput on display unit . I have to run the program once, should be able to view the ouputs. So, Is it possible to write such program in Labview??. I have downloaded few instuments drivers. Is it possible to combine those intrument drivers and construct a new VI which would be able to control all this ?? Will it be easier to program this on Labview or I should go for Labwindows/CVI ??.
Please mention some useful sites or tips (if u know) for writing program.
Thanks in advance
shasanka

Hi Shasanka,
ofcourse it's possible to control more than one instrument at a time.
You should use the VISA routines to access all your devices. Every device get it's 'address' as 'VISA resource name'. This resource name contains information on the used bussystem and the (internal) device address (i.e. GPIB devices have an address number).
So I suggest to read the manual and to look at the examples that come with LabView!
And (from your question) it seems you should take the 3 or 6 hour seminar as well! (Look at www.ni.com -> academics.)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

SENDING MORE THAN ONE PIC VIA MMS

is there any way i can send more than one pic via mms on the pre?!

Hello and welcome to the forums;
At this time, you can only attach one picture per message. You would need to send each picture as its own message.
TreoAide

How to attach more than one picture on an email

How to attach more than one picture on an email?

Tap the square with arrow on top right and select pictures you want to send (max 5 pictures)
http://i1224.photobucket.com/albums/ee374/Diavonex/f0bd7d73.jpg

How to add more than one phone number in imessage?

How to add more than one phone number in imessage?

If you mean sending to multiple phone numbers, place a comma between the numbers in the "To" box, or select the "+" to use numbers in your Contacts

How to show more than one record at a form-like style report?

Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank u

Hi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer

Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

Dear All
Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
Many thanks

Click here for options.
(69081)

How to select more than one slide on Keynote?

Please, someone knows how to select more than one slide on keynote for IPad?

// Allow selection to span one contiguous set of rows, visible columns, or block of cells
table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
// Allow multiple selections of rows, visible columns, or cell blocks
table.setSelectionMode(ListSelectionModel.MULTIPLE_INTERVAL_SELECTION);

How to display more than one documents on windows 8 desktop?

how to display more than one documents on windows 8 desktop?

Adobe Reader Touch doesn't show more than one file on screen and doesn't show them on the desktop. Apparently these are very old fashioned things that Microsoft doesn't think we'll want to do any more and calls them "legacy" to make them sound antiquated.
If you want to do these things use the legacy Adobe Reader, a much more powerful and flexible app (and not obsolete in the slightest). http://get.adobe.com/reader . There are no legacy apps in the Windows App Store.

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

How to sync more than one iphone to a macbook?..

How to sync more than one iphone to a macbook?..

Open itunes, connect iphone, select what you want to sync, sync
Do the same for each iphone.

How to add more than one tabular region in a page?...

How to add more than one tabular region in a page?
i have a page, that page contain form and tabular region. when i trying to add another tabular region it showing error
1 error has occurred
Updatable SQL Query already exists on page 2. You can only add one updatable SQL query per page. Select a different page.
but i have to add the tabular in that page.
Is it possible?
pls help...
Thanks and regards,
skud

hi,
even i am searching for some thing similar.
i want to have 3 calendars in one page.
getting same message calendar already exists on page 2. You can only add one calander per page. Select a different page.
pls help.

Just bot a macbook pro to replace one of my pc's. can't figure out how to have more than one website open at a time like explorer. Is it possible to do?

I can't figure out how to open more than one website at a time like explorer does on a pc. would like to know if it Is possible or not.

Tabbed browsing is the way. Go to Safari's View menu:
and click "Show Tab Bar." When you see a link on another site you wish to open without closing the first site, simply right-click and select "Open Link in New Tab."

How to share more than one Time Machine folder

Hi,
With Snow Leo Server I found how to find how to share more than one Time Machine Folder but I can't see how to do the same with Lion Server, could you help me with that ?
The goal of that is to offer one TM folder per user which is located on a dedicated partition in order to limit the size of TM backups per user (150Gig).
In Lion, in can only share one TM folder for everybody and I didn'tfind if I can set a limit size per user...
Thank you in advance,

I have figured out a way to enable multiple backup targets.
However, it's one of these things I wouldn't want to describe to anyone except true programmer types, because everyone else has a 90%+ chance of messing up their system if they do something wrong.
It involves turning off file sharing, and then editing the plist files in /private/var/db/dslocal/nodes/Default/sharepoints/
The gist of it is this:
a) first create all the share points you later want to use for TimeMachine, and set them up for afp-only file sharing, also create one TM target, which you can either use later, or have there so the system has one entry it knows how to handle. I just made a bogus one that I'm not actively using.
b) turn off file sharing in Server.app
c) turn off TimeMachine in Server.app
d) now you can edit the files, the easiest is with Xcode, so you may want to install that first
e) for each sharpoint you made in a) there will be a corresponding .plist file in the location indicated, these are the files that need to be edited.
f) for each of these files
     1) the item0 string property in the timeMachineBackup array must be switched from 0 to 1
     2) a new key of type array with the name timeMachineBackupUUID must be created
     3) in the newly created array an item of type string must be placed with the value of a UUID, which can be created with the shell command uuidgen
g) make sure all the edited plist files are saved
h) turn on TimeMachine in the Server.app again
If all went well, you now should be able to go to one of your networked client computers and see all the time machine share points just created as options for being a time machine target.
Anyway, if you go that route: be careful, don't blame me if you muck things up...

How send video more than one minute via what's up

Similar Messages

Maybe you are looking for