How sent message for any manager in Nokia ????

Hi All,
I want sent message for any manager in Nokia , because of I facing a long suffering of Nokia .

Everything depends on what you wish to speak to a manager about. If you are having issues with the service provided by Nokia Care in your country, whether that is the Nokia Care contact centre or a Nokia retailer or Care Point, then the local contact centre can advise you how to deal with your issue. In some countries, the contact centres have a department specifically to help you resolve your issue; and in some countries there are separate numbers to call in order to deal with issues or complaints. If you have already been through this process and are not satisfied with the result, you can contact the head office of Nokia in your country or region.
The link below takes you to a page where you can find lists of Nokia offices for all countries where Nokia has a presence:
http://www.nokia.com/about-nokia/contacts/nokia-offices
Be aware that "Manager" is a very loose term, Nokia is a huge multinational corporation with large numbers of staff in a variety of rôles, and therefore there are many different types of manager with responsibility for different areas of the business, so it is important that your concerns about Nokia Care are addressed to the right personnel, which is why you are best to start with the Nokia Care line for your country, they are the main point of contact for all customer queries. Be aware that a letter sent to the wrong place may take a long time to reach the right people, and therefore does not help your cause.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Similar Messages

Multiple Sent Messages for my .Mac account

For some reason I have two sent message mailboxes for my .Mac account. One is under the Sent grouping, i.e.:
Sent ->
-- Account 1
-- .Mac
-- Account 3
And another one listed with my .Mac folders. Both have the same contents. Any suggestions on how to get rid of the second?
Cheers!

Hi MrWynnm, you're welcome.
I don't see anything strange there. If Store sent messages on the server is OFF, the mailbox you see within the standard Sent group should correspond to the local ~/Library/Mail/Mailboxes/Sent Messages ([email protected]).mbox folder, whereas the folder you see within the .Mac account group should correspond to a (totally unrelated) mailbox stored on the server and cached locally in ~/Library/Mail/Mac-username/Sent Messages.imapmbox.
That explains why you see two mailboxes in Mail, BUT it doesn't explain why they both show the same contents. Try this:
1. Quit Mail.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. Open Mail, delete the mailbox that appears under the .Mac account group... and let me know what happens...

Have updated InDesign CC, but now get an error message for Font Manager.InDesignPlugin

I have updated recently updated InDesign CC, but now I get this error when I try to open a document that was working fine yesterday:
Cannot load Adobe InDesign CC because it requires version 9.1 or later of the Font Manager.InDesignPlugin plug-in. Please contact vendor for compatible version of Font Manager.InDesignPlugin.
Where can I find this plugin (for Mac)?

Thanks Peter, just saw your reply now, but that night I did uninstall and reinstall ID; in the morning did the ole shutdown - rest - command+option+p+r on start up as an added precaution and then it worked fine for the rest of the week.
Also, I got a new computer last week. The changeover to the new mac seeeeeemed to be fine...
However, I think Adobe suffers from Monday-itis as today I can't open any programmes as I get the attached message box when I try to sign in to Creative Cloud. Will make this it's own post too.

No specific exceptions in standard ExchangeFaultData message for any ES?

Hi,
I am trying to implement various enterprise services in ERP backend, but whenever a service return one or more exceptions, I always get an empty exception message. Eg:
<n0:ExchangeFaultData xmlns:n0="http://sap.com/xi/SRM/SE/Global" xmlns:prx="urn:sap.com:proxy:SRA:/1SAI/TAS570F727BD12E0D378A86:701:2008/06/06">
<standard>
<faultText />
</standard>
</n0:ExchangeFaultData>
If I debug the method I can see that several exceptions are raised and specified in diverse structures, but for some reason these aren't converted into the standard fault message type for the ES. I suspect that I am missing some simple configuration.
Any suggestions?
Many thanks,
Emil

Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta

How inDesign notify for any changes on document.?

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
And after saving * symbol is get removed from the name of document. How and where indesign@ handles this? How to get Notification?

Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

No status messages for any components after 2012 SP1 upgrade

Hi, after a recent upgrade to 2012 SP1 two of my sites no longer show any status messages in monitoring. All the services seem fine, I can distribute and deploy packages to clients, run queries etc.
All other sites are now fine, the difference is the working sites are on 2008 R2 or 2012 and the trouble sites are on 2008 Storage Server SP1. So obviously close at hand to assume the Site Server OS is somehow the culprit.
SP2 is installed on all sites for SQL Server 2008 R2, servers have been restarted.

There we go!
So sender.log had these:
There is no existing connection, Win32 error = 7054
and
Error during connection to \\primaryserver.domain.local\SMS_SITE (7054).
As mentioned already, I already verified the secondary site computer accounts were in the SMS_SiteToSiteConnection_XX1
on the primary site server. But I added my main SCCM service account there as well and under Administration\Hierarchy Configuration\File Replication I changed the File Replication Account from the computer account to the service account and the status messages
are now transfered and appearing in the Status Message Viewer.
I don't really care why the computer account wouldn't work, I'm just going to leave it like this, the 2008 Storage Servers
are due to be replaced or upgraded this year anyway.
Thanks Juke and everyone else!

Warning message for Managed server

Hi,
I am using weblogic 11g and OS is LINUX.
I am getting warning message for my managed server as "ThreadPool has stuck threads".
And values of "Self-Tuning Thread Pool" are
Active Execute Threads : 17
Execute Thread Total Count : 17
Execute Thread Idle Count : 8
Queue Length : 0
Pending User Request Count : 0
Completed Request Count : 18529
Hogging Thread Count: 6
Standby Thread Count: 0
Throughput : 13.486513486513486
and thread dump is
"main" waiting for lock weblogic.t3.srvr.T3Srvr@4c704c70 WAITING native
 java.lang.Object.wait(Native Method)
 java.lang.Object.wait(Object.java:167)
 weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:849)
 weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:465)
 weblogic.Server.main(Server.java:67)
"JIT Compilation Thread" RUNNABLE
null
"Signal Dispatcher" RUNNABLE native
 com.ibm.misc.SignalDispatcher.waitForSignal(Native Method)
 com.ibm.misc.SignalDispatcher.run(SignalDispatcher.java:54)
"Gc Slave Thread" RUNNABLE
null
"Gc Slave Thread" RUNNABLE
null
"Gc Slave Thread" RUNNABLE
null
"Thread-4" waiting for lock java.util.Timer$TimerImpl@13ee13ee WAITING native
 java.lang.Object.wait(Native Method)
 java.lang.Object.wait(Object.java:167)
 java.util.Timer$TimerImpl.run(Timer.java:210)
"Thread-5" waiting for lock java.util.Timer$TimerImpl@344a344a TIMED_WAITING native
 java.lang.Object.wait(Native Method)
 java.lang.Object.wait(Object.java:196)
 java.util.Timer$TimerImpl.run(Timer.java:230)
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@4a2f4a2f WAITING native
"[STUCK] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[STUCK] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[STUCK] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock [email protected]238d2 TIMED_WAITING native
"[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@63776377 WAITING native
"[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@b230b23 WAITING native
"[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@6d096d09 WAITING native
"[ACTIVE] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@8ee08ee WAITING native
"[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@64426442 WAITING native
"[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
"[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@7a087a08 WAITING native
"[ACTIVE] ExecuteThread: '15' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@35d035d WAITING native
"[ACTIVE] ExecuteThread: '16' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock weblogic.work.ExecuteThread@6300630 WAITING native
Please suggest me how to resolve this issue.

Hi,
The problem is that the directory /appl/webbus/bea/user_projects/domains/ITIC-DEVEL-WLI/ does not exist at the node, because we have move it to /appl/webdbus/ instead of /appl/webbus/. The question is why applications need to create adminServerDevel/upload directory and how can override it.
Thanks in advanced

Sent message doesn't appear in sent mail or any other mail folder. I only know I sent it because it comes back with the reply. What gives?

Today I sent a message on the Mail program that did not appear in the Sent messages or any other Mail folder. I know I sent it only because it was included in a reply that came back. Didn't happen with any other messages I sent today (or any others that I can recall). What gives? I used to have complete faith in my Sent folder. Thanks and apologies in advance if similar queries have been answered recently or multiple times. I'm having a hard time getting used to this new support format.

Happy Dog wrote:
Will sent messages now be saved on my computer,
Hopefully.
will they be accessible on my other devices that are linked wirelessly through Mobileme?
No!
If so, that's what I wanted anyway. But I never thought about this box in Mailbox behavior, as I tend to go with default settings, and I'm no computer expert as you can tell.
Also, now that I've changed the setting, will previous Sent messages continue to be stored on the server?
It will only apply to new messages. Try it out and see if you can see your Sent messages. If you want them to be accessible on other devices, you will have to change the setting back. Just changing the setting a couple of times may get the online account working properly, so don't be afraid to play around with it.
If this is a MobileMe account, I would expect it to work properly. Try it in local mode. Then switch it back to server mode. Rebuild your send mailbox. Maybe after all of that it will be working better.

Cannot change Hide Sent Messages setting

I have a user that had his Curve 8530 replaced. With his previous unit, he had the Hide Sent Messages setting (in Messages - General Options) set to Yes. With his new unit, everytime he changes that setting to Yes and saves the change the sent messages are not hidden. He goes back into the options and the setting is back to No. No matter how many times he's changed and saved the setting it doesn't work. He can change other settings on this screen (like Hide Read Filed Messages) and those settings remain saved. He cannot change the Hide Sent Messages for some reason. He's removed the battery and still doesn't work. We are on the Enterprise Server and I can't find anything in there that would have changed that would be preventing this. Any ideas? Thanks.

Hello,
Nope...there is no such setting. My hope is that as they continue to develop the product, that they will even further enhance the replication of the on-device experience into Blend. But, for now, it is what it is.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Asha 311:Sent messages deleted automatically afte...

Hi '
My name is umesh and i have brought a nokia asha 311 phone But i have recently noticed that my previously sent message is being deleted automatically from all my conversations (Used group messaging to send a sms) that Particular message is deleted from all my conversations and
I got and surprsingly low battery back up dun know why is that
Please tell me Is this normal in asha 311 that deleting the sent messages automatically

Hey Support my Nokia c5 phone messages got deleted automatically.. its happening for the second time since i bought it.. many of my imp messages, drafts and saved msgs got deleted... showing all as empty.. is there any solution to recover all those..??? or is this a permanent problem of nokia c5..?? or whether it is designed to delete all messages after such a number of stored messages..?? pls help..
With regards,
Prasad vinson

Moving mail users to IMAP from POP. Issues with sent messages disappearing

Our mail server has been working well for several years, running currently on Mac OX 10.4.10 (Xserve G5). All user accounts have always been setup for pop and imap in WGM but we have just recently started to move client settings to IMAP. No changes to the mail settings in server admin except opening the firewall to include port 993 for imap ssl.
The issue is that all users appear to loose the sent mail records when using the apple mail apps. After a message has been sent, the message record stays in the Apple generated sent box for that account and then disappears (presumably after syncing with the server).
The mail app "account" settings shows that sent messages are to be stored on the server and never to be deleted (in mailbox behavior).
If you do a "get info" on the mailbox,sent messages don't show on the server either under "Sent". I also created an additional mailbox "Sent Messages" to be used as sent mailbox location. mailbox shows up on the server, but no mail is added when sent from the apple mail app.
Now, I would have assumed this to be an issue of the client app, but the behavior is consistent across several machines and also on new mail app configurations.
When using Entourage with the same account however, the server works as anticipated and all sent messages are stored on the server (in the "Sent Messages" box). Any Entourage sent messages also show up in the "Sent Messages"mail box of the apple mail apps.
When using iphones, the behavior is somewhat unclear. The iphone mail settings (under advanced) show the "server" selected ("Sent Messages") for sent mail, yet the actual iphone mail app lists that folder as just "Sent". When sending messages, that mailbox shows the Entourage sent messages and iphone sent messages, but the iphone messages never appear on the server.
This only happens on sent messages; inbox, drafts, deleted and junk mail boxes work perfect. This also happen on any imap client account I setup, not just a specific one.
Any suggestions? Any setting I am overlooking? Using Entourage for all users is not an option...
Thanks for any help...

Please see my post and how it was resolved:
http://discussions.apple.com/thread.jspa?threadID=1181356&tstart=0
When I had that issue, I tried using Apple Mail app and noticed that Sent Mails are getting lost. Try sending an email using WebMail. You might see similar "Permission Denied" error. Try restarting the server and see if the issue still exists.

Default sent folder for IMAP

Hi all,
i bought recently a used iBook and therefore I am using my IMAP mail account now from my mini (OSX 10.4) and my iBook (OSX 10.3). Somehow the default name for the folder of sent message must have been changed between these two releases.
While 10.4 (Mail 2.1.3) stores everthing in a folder called 'sent' the iBook with Mail (1.3.11) stores mails in 'sent messages'. Any idea on how to change this behaviour?
Thanks,
Daniel

Hi,
Please refer to this article written by our MVP, Diane:
http://www.slipstick.com/outlook/email/choosing-the-folder-to-save-a-sent-message-in/
You can choose to use VBA or rules to choose the folder to save a sent message in.
I hope this can help.
Regards,
Melon Chen
TechNet Community Support

Some sent messages lost in Apple Mail

I have a new Macbook Pro early 2015 running Yosemite and use Apple Mail.
I am surprised at how slow outgoing messages are to send, regardless of whether I'm on a fast or slow wifi network, regardless of whether the message has rich content.
More troubling is that once in a while, and I think its for particularly long sends, the sent message never appears in my Sent box.
Rebuilding doesn't restore them.
This is on an imap server. It doesn't use a Path prefix, uses Port 993 and SSL is selected.
Can anyone help? I need to keep my sent messages for reference. I saw an older post like this from 2007 but was never listed as resolved.

BTW, you posted in the Lion forum instead of Yosemite. For best results post in Yosemite the next time.
We need to determine if this is a Spotlight issue or a problem in Mail. It would be helpful to know what type IMAP? iCloud, Gmail, Yahoo, Outlook.com or other.
If you search in Spotlight in the Finder (top right in menu bar) for the message subject does it show up? If yes, can you find the message in Mail search?
HOW TO RE-INDEX YOUR SPOTLIGHT CACHE FILES
Option 1)
From the Apple menu, choose System Preferences.
* Click Spotlight.
* Make sure Mail & Messages is checked under the Search Results tab.
* Click the Privacy tab.
* Drag your drive to the list. Wait a couple of minutes.
* Remove the item you added.
* Spotlight will re-index the contents of the item you initially dragged to the list.
Option 2)
Follow the steps here.
Use OS X Recovery Disk Assistant to reset Your files and folder permissions
When you restart Spotlight will reindex your entire drive.
Option 3)
Copy the text below and open Terminal (in /Application/Utilities). Paste the code into the Terminal window at the prompt.
sudo mdutil -E /
You will be asked for your administrator password (and if you've never used the sudo command you'll need to accept the warning presented). When you type your password, it will look like nothing is being typed. That's normal. Once you've typed your administrator password, press Return.
This will completely remove the Spotlight index and force a new one to be created. Probably not necessary, but I would immediately quit Terminal and restart your Mac.
SUMMARY:
Depending on your Mac and the contents of it's hard disk, re-indexing may take several hours. Doing this overnight is a good option if you have a large drive.
You can tell if it's still in progress by simply looking at the Spotlight menu: There's a blinking dot in the middle of the magnifying glass while indexing is occurring. You can also open Activity Monitor in Applications/Utilities and type in md in the search filter. You should see mdworker32 and mdworker. mdworker32 is the Microsoft Outlook Spotlight index and mdworker is for system.
Until this process is finished, Spotlight won’t know the contents of your disks and neither will Mail.

Duplicate Inbox after trying to solve Gmail duplicate sent messages...

.. was trying to solve the problem of duplicate sent messages with Gmail email on the BB Curve 8350. In following instructions from this message board, I instead ended up with duplicate INBOXES. Now, when I unregister and re-register my gmail account on my phone, it creates a new icon. This has resulted in my original problem being multiplied by four. What I mean is, now I have duplicate sent messages in TWO DIFFERENT INBOXES. Originally, my gmail account went to the main Inbox on the phone. I cannot delete the main message system.. HELP!

It seems I found a bug!
I now understand what happens, although don't know the reason. The symptoms are caused by the "Auto-Expunge" feature on Gmail. I disabled it and fooled around the options and this is what I discovered:
When I set "the message will be archived when disappear from the last visible folder", the message is archived whenever I try to move the sent messages to any other folder than the "Sent" one;
When I set "move the message to trash when disappear from the last visible folder", the message is deleted and moved to trash whenever I try to move it from the "Sent" folder to any other.
In other words, for some awkward reason, Lion's Apple Mail is not handling folder-to-folder operations and Gmail thinks that the messages has been removed from the last visible folder and does with it whatever it was instructed to, which is either to archive or move to trash.
Since by disabling Auto-Expunge Gmail waits for the client to take the action, it seems that Apple Mail is sending the wrong command or sending it on the wrong timing.
I wonder is Apple is aware of this.
Any suggestions?

Solaris don't send message for domain on localmachine

Hi,
I have the following problem in my solaris box.
When I try send a message for any user in domain pointed to my server messages don't arrives. But if I try send for other server/location the messages are sent and user receive that.
Any help is appreciate.
I will use sendmail and all default configurations are in place. If any help or information please talk me.

I don't believe you understand. Maybe I didn't describe the problem correctly. If I go into my photos, select a photo then click on the icon to forward the picture... I then select "message" add a recipient, then click send. The screen disappears as to indicate the picture was sent. The recipient does not receive the picture. If I then go into messages, it does not show the picture as a sent message... It is not being sent. It only will send a picture if I am already I'm the messaging app and either take a new picture, or select existing. My daughter updated to 7.1 today on her 4S and does not have this problem.

How sent message for any manager in Nokia ????

Similar Messages

Maybe you are looking for