How separate and rotate pieces of an object in preparation for creation of a GIF in After Affects?

Here is the image that I'm working with...
I want to make this object rotate a tight 90 degrees in After Effects and then separate. If you're wondering why I put this up under Photoshop it is because I need to have this model in addition to 2 others, one of the top half and one of the bottom half and button, both turned 90 degrees [preferably clockwise] in order to create the GIF. I need these 3 pieces before I can even consider creating the GIF in After Effects... so if somebody either wants to try and do it for me or to try and help me to do it on my own, either one would be extremely helpful

Don't worry guys, I actually found the answer all on my own what I needed was to separate the image into 3 files, something I was probably going to do anyways to make exporting and importing the images easier and rotating the two top and bottom half images here's what I have right now (per background removal)Thanks for trying to help... but I think I'm ready to move on to After effects with this one The reason I'm moving it to after effects is simply because I understand simple movement/animation there already... if you're curious as to what I plan on doing with these images, the complete ball will sit in a hole in my border, turn a sharp 90 degrees right and then be replaced by the two half images, the bottom one will fade slowly out while the top is lifted off screen to the right... it's a fancy reveal for my upcoming project thanks again

Similar Messages

How not to rotate relative to the object?

hi,
currently i am rotating transformgroups like this:
       Transform3D currenttrans = new Transform3D();
       objTrans.getTransform(currenttrans);
       Vector3f currentVector = new Vector3f();
       currenttrans.get(currentVector);
       currenttrans.setTranslation(new Vector3f(0,0,0));
       objTrans.setTransform(currenttrans);
       Transform3D rotateclockwise = new Transform3D();
       rotateclockwise.rotX(-Math.PI/10);
       currenttrans.mul(rotateclockwise);
       currenttrans.setTranslation(currentVector);
       objTrans.setTransform(currenttrans);But that does not feel right. It always rotates relative to the object. But I want to rotate it relative to the universe (or to my view).
That means I for example: I want to be able to rotate the object like a head that looks to the right, no matter what its current state is. This means in my example: If the "head" is currently "looking down" then it should still look down at the same angle after I rotated it to the right.
I hope u understand (its hard to explain without pictures).

To find where any node is relative to the rest of the universe you can use it's getLocalToVworld method. That should save you a bit of extraneous calculation at least.

How to get the List of Database Objects (Table/View) for a given APEX Page.

Hi,
I have an application and that consist of pages like page1,2,3,.....
*1.* I want a report which can give me the list of all the Pages1,2,3,....
I am using the following query to acheive this.... THIS IS FINE..
select a.workspace, a.owner, a.application_name, b.page_id, b.page_name
from apex_applications a,
apex_application_pages b
where a.workspace = b.workspace
and a.application_id = b.application_id*2. Now, I want for each individual page*, the list all the database objects (tables/views), which that page is using.
I am using ALL_DEPENDENCIES , but I am not getting the result.
So, want to know if there any view/table, where I can get the Application Pages & there database object list...
Thanks,
Deepak

Hari,
Thanks for the response.
The view APEX_APPLICATION_PAGE_DB_ITEMS will only give me the table name related to any Page Items defined to that page..It will not give me all the database objects..
suppose we have a Page, having a report based on multiple tables and there is no Page items defined on that page, we will not have any value in this ....DB_ITEMS table. same thing if we have define some PL|SQL(using some table/view) in a Process, that will not be populated in .....DB_ITEMS table. I want some thing like all the database objects (table/views/function/procedure/.....) for a particular Page ID.
Thanks,
Deepak

How to redefine GOS toolbar function "SEND OBJECT WITH NOTE" for deliveries

Hello Abapers,
for inbound and outbound deliveries (tcodes VL01N, VL02N, VL03N, VL31N, VL32N, VL33N) I have to replace the GOS toolbar function SEND OBJECT WITH NOTE with a redefined function matching the following specifications:
- Title field needs a different content
- Text (note content) should be filled by default, maybe with standard text, but can be overwritten
- All attachments in the attachment list of the object should be included by default or be selectable thru an additional button
Also possible could be an addiitonal toolbar function SEND ATTACHMENTS WITH NOTE as a copy of SEND OBJECT WITH NOTE.
Although I checked the SDN forums for a matching solution, I couldn't find one in tons of GOS threads.
Perhaps someone had solved a similar problem to send obejct with notes from GOS toolbar with several of the object's attachments.
Maybe some GOS classes have to be redefined for that, but this should only be available for deliveries, not for the other BOR types.
I'm waiting for your ideas.
Best regards,
Klaus
Edited by: Klaus Babl on Feb 16, 2012 10:13 AM

No the list of steps done to solve the issue:
1. Copy of class CL_GOS_SRV_SEND_OBJECT to new class /SIE/IS_BSD_GOS_SRV_SEND_ATT.
2. SM30 for table SGOSATTR: New entry for new service ZSO_SENDATT for the new class.
3. Copy of methods ON_SERVICE_SUCCEEDED, CHECK_STATUS, CREATE_ROOT_ITEM and ON_LINK_CREATED from class CL_GOS_SRV_ATTACHMENT_LIST to the new class.
4. New code added to the top of method CHECK_STATUS to show the service for deliveries only:
IF is_lporb-typeid NE 'BUS2015'
AND is_lporb-typeid NE 'LIKP'.
    ep_status = mp_status_invisible.
    EXIT.
ENDIF.
5. Copy of function group SAPLSGOS_OUTBOX and function module SGOS_SEND_OBJECT_WITH_NOTE to own copies.
6. Before calling cl_bcs=>short_message there are several steps to do:
- CALL METHOD cl_binary_relation=>read_links
- CALL FUNCTION 'SO_DOCUMENT_READ_API1' for all links
- cl_document_bcs=>create_document for all those documents (we are using types ATTA, NOTE and URL)
- APPEND those created documents to the attachment table and pass it to i_attachments of cl_bcs=>short_message
Solved issue!
COMMENT: This SDN wiki document is outdated and doesn't work any more:
http://wiki.sdn.sap.com/wiki/display/Snippets/ABAP-SendingGOSattachmentstoanemailaddress
Best regards,
Klaus

How to create package name what is the transaction code for creation

Hi,
I want to create the package and also put that package in my program, how to put the package already saved program.

Hello Rajyalakshmi
You do not put a package to or into a program but <b>ASSIGN </b>a report to a package. To reassign a report to a new package (e.g. from $TMP to z-package) call transaction SE80 and right-click on the report name in the tree display. Choose the following function in the context menu:
Other Functions -> Change Package Assignment
Regards
Uwe

HT1430 I tried downloading the new iOS 7.6 update and my phone was saying it was preparing for the update. My screen was telling me that i had to connect my phone to iTunes, which I did and even iTunes wasn't recognizing my phone.

phone will not work after automatic download of ios7.6

You mead iOS 7.0.6, right?
See this:
iOS: Unable to update or restore

HT5098 How can I read on my Apple Arabic files of Times New Roman or Arial in PC? when I get the files the Arabic letters are separate and not joined. Is there a common font in Arabic that can convert the PC Windows files to my Apple?

How can I read on my Apple Arabic files of Times New Roman or Arial fonts made in PC? when I get the files the Arabic letters are separate and not joined. Is there a common font in Arabic that can convert the Arabic PC Windows files to my Apple?
The same with email messages ,
And when I get Power Point files made in PC Windows, they are like PDF, not Power Point!
Anybody with a good suggestion?

Yewtree wrote:
when I get the files the Arabic letters are separate and not joined
Do not use MS Word for Mac, it does not support Arabic. Instead use Mellel, TextEdit, Nisus Writer or OpenOffice. Try the font Geeza Pro if others do not work.
What are you using to read email?
What are you using to read powerpoint?

Error : 'No object identification permitted for infotype 0582, subtype LTA'

Hi Experts,
               While executing the program 'HINUINFO_UPDATE'
i am getting an error 'No object identification permitted for infotype 0582, subtype LTA'.
               After the approval for LTA claim is done in ESS i have executed the program 'HINUINFO_UPDATE' to update he infotypes 15 and 582. Infotype 15 is getting created but while creating the infotype 582 system gives the above error message.
             In the detailed error log system gives the following message.
                "You attempted to access a data record with the object identification 1. However, according to the Customizing settings, object identifications cannot be used for subtype LTA of infotype 0582".
        Can anybody please assist me how to solve this problem. Helpful answers will be rewarded.
Thanks and Best Regards,
Sanoj.

Hi ,
Did any one find solution for this ? Please reply how to fix this issue.

How long is the "preparing for dispatch" stage for the iphone 5s?

How long will my iphone 5s be in the "preparing for dispatch" stage?
Thanks

expect to recieve it between the quoted delivery dates, and be suprised if it arrives earlier. It's possible, but no one here can say for sure.

Difference between IDOC for creation, change and deletion

Hi,
As per the requirement, an IDOC will be generated for PO, Vendor Masters and Goods receipt when ever a PO or Vendor or Goods receipt is created or changed. How can we identify whether the IDOC has been created for creation or change of a particular thing? Is there any identifier where in we can check whether the IDOC generated is for creation or change?
And also how to identify that a particular PO or VM or GR has been deleted or cancelled?
Thanks & Best Regards,
Phani.

hi,
to check the idoc status ie idoc created or changed --use transaction WE05
we02 to diplay idoc
please rewrd points if helpful,
shylaja

How would i make an object and rotate it?

ok, i'm trying to get java to make a graphics object, and then create an array of said objects (basically just a bunch of rectangles organized into rows/columns) with the end goal being that i be able to put this collection of rectangles into a JPanel and then move it around and rotate it without changing its dimensions (so each rectangle in the collection retains the same height and width but with a different placement/orientation angle )
My java textbook (yes, college student) doesn't cover the Graphics2D stuff which SEEMS to be what i would use... but beyond that I'm finding the resources on the topic to be uniformly opaque. i think i just need some starting point to extrapolate from. could anyone reply me a crash course in the above...?

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Blocks extends JPanel {
    Block[][] blocks;
    int dx = 2;
    int dy = 2;
    public Blocks() {
        registerKeys();
        setFocusable(true);
    protected void paintComponent(Graphics g) {
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                            RenderingHints.VALUE_ANTIALIAS_ON);
        if(blocks == null) initBlocks();
        g2.setPaint(Color.red);
        for(int j = 0; j < blocks.length; j++)
            for(int k = 0; k < blocks[j].length; k++)
                blocks[j][k].draw(g2);
    private void initBlocks() {
        int rows = 6;
        int cols = 3;
        Dimension d = new Dimension(200, 200);
        BlockMaker blockMaker = new BlockMaker(rows, cols, d);
        blocks = blockMaker.getBlocks();
    private void registerKeys() {
        getInputMap().put(KeyStroke.getKeyStroke("UP"), "UP");
        getActionMap().put("UP", up);
        getInputMap().put(KeyStroke.getKeyStroke("LEFT"), "LEFT");
        getActionMap().put("LEFT", left);
        getInputMap().put(KeyStroke.getKeyStroke("DOWN"), "DOWN");
        getActionMap().put("DOWN", down);
        getInputMap().put(KeyStroke.getKeyStroke("RIGHT"), "RIGHT");
        getActionMap().put("RIGHT", right);
    private void step(int x, int y) {
        for(int j = 0; j < blocks.length; j++)
            for(int k = 0; k < blocks[j].length; k++)
                blocks[j][k].move(x, y);
        repaint();
    private Action up = new AbstractAction() {
        public void actionPerformed(ActionEvent e) {
            step(0, -dy);
    private Action left = new AbstractAction() {
        public void actionPerformed(ActionEvent e) {
            step(-dx, 0);
    private Action down = new AbstractAction() {
        public void actionPerformed(ActionEvent e) {
            step(0, dy);
    private Action right = new AbstractAction() {
        public void actionPerformed(ActionEvent e) {
            step(dx, 0);
    public static void main(String[] args) {
        Blocks blocks = new Blocks();
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(blocks);
        f.setSize(400,400);
        f.setLocation(200,200);
        f.setVisible(true);
class BlockMaker {
    Block[][] blocks;
    int PAD = 20;
    public BlockMaker(int rows, int cols, Dimension size) {
        int w = (size.width - (cols+1)*PAD)/cols;
        int h = (size.height - (rows+1)*PAD)/rows;
        blocks = new Block[rows][cols];
        for(int j = 0; j < rows; j++) {
            int y = PAD + j*(h + PAD);
            for(int k = 0; k < cols; k++) {
                int x = PAD + k*(w + PAD);
                blocks[j][k] = new Block(x, y, w, h);
    public Block[][] getBlocks() {
        return blocks;
class Block {
    int x;
    int y;
    int w;
    int h;
    public Block(int x, int y, int w, int h) {
        this.x = x;
        this.y = y;
        this.w = w;
        this.h = h;
    protected void draw(Graphics2D g2) {
        g2.drawRect(x, y, w, h);
    protected void move(int dx, int dy) {
        x += dx;
        y += dy;
}

How do I rotate an object 45 degrees at a time

I'm designing a simple online floor plan staging area and
need to be able to move and rotate (45 degrees at a time) simple
boxes. Literally picture squares on a white background that you can
move around and with the click of a button (perhaps by clicking a
small icon within each square) each square can be rotated at 45
degree increments clockwise.
At the same time, I need the option to duplicate a box on the
stage as many times as needed. (Is that even possible?) Basically,
the stage will start off with just 4 boxes, all different sizes.
From each of those boxes, perhaps simply clicking on an icon of one
of the boxes, a copy can be generated for placement within the
stage. You get the idea.
I already have the code down for movement within the stage
area....
on (press) {
startDrag(this, true);
on (release) {
stopDrag();
.... but need help with the rest. The way I have my objects
(boxes) set up is with each box as a button. The buttons are then
placed within a movie clip. The code above is attached to the movie
clip.
Hope I'm explaining everything correctly. Any help is greatly
appreciated!

Bob, thanks for your advice - I appreciate your time and
effort. However, being that I'm a complete novice with ActionScript
I cannot seem to construct the code properly to get the desired
results as you are suggesting. I'm actually quite shocked that I've
even been able to piece together as much as I have - mostly from
posts on other forums (see the link in my previous post). You on
the other hand sound like a complete pro and something like this
would likely be second nature for you. I often find myself
explaining things to others as if they've been doing what I do just
as long as I. Its not until their eyes gloss over that I realize I
need to be much more specific and not so general with my guidance.
This is more what I need with this, more specific guidance so I can
fully understand just how what you are so generously suggesting
should be constructed.
Anyhow, I would very much appreciate any further assistance
you are willing to provide. It would be most appreciated if you
were willing to edit my code so I can see exactly where these
function go and how they are constructed - this is how I learn.
That said, your time is very important so if you have none
available I understand.
Thanks again Bob!
Darren

HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.

HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.
THANKS

If you need to Transfer photos from iPod to PC,I have a method for your reference,I suggest you use iStonsoft iPod to Mac Transfer software to copy photos from iPod to Mac,a professional software,Not only can you quickly Copy pictures from iPod to Computer,but also can save a lot of trouble and time
[B]Follow these steps to Transfer photos from iPod to Mac[/B]
Step 1. Download and run the iStonsoft iPod to Mac Transfer software on your Mac computer
Step 2. Connect iPhone with Mac
Step 3. Hit "Photos" to scan photos from iPod to Mac
Step 4. Click "Photos" button to transfer photos from iPod to Mac
Step 5. Wait a while,you will success Transfer these photos from iPod to Mac
How to Transfer/Copy Photos/Pictures from iPod to Mac computer

How do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

how do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

if you see all the different panel. I past the info in and have to manually expand the width of every panel. Is there a way of pasting the text in and the panel moves to the right with so that there is an even space on both sides of the blue panel?

How to auto rotate Images on Full Screen Slideshow if pictures were taken mixed Portrait and Landsca

In Muse: How to auto rotate Images on Full Screen Slideshow if pictures were taken mixed Portrait and Landscape

There is no way that Muse would automatically rotate the images. What you can instruct Muse to do is whether you want to show all image content and leave blank space in either direction OR scale the image to fill the frame resulting in some cropping, but filling the otherwise blank space.
The options are Fit Content Proportionally and Fill Frame Proportionally respectively.
Cheers,
Vikas

How separate and rotate pieces of an object in preparation for creation of a GIF in After Affects?

Similar Messages

Maybe you are looking for