How set FTP file server set in my Data carriar in DMS

hi
please say me how i set my FTP file server in in my Data carriar Of DMS
please say me
Nainesh

Hi Andreas,
It depends on your needs. If you want to provide redundancy to your FTP services, it is recommended to group two VMs in an Availability Set to ensures that during either a planned or unplanned maintenance event, at least one VM will be
available and meet the 99.95% Azure SLA.
http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-manage-availability/#configure-each-application-tier-into-separate-availability-sets
If you want to set up two files servers in Azure VMs to an availability set, you can follow the steps below:
1. Create a virtual network:
http://azure.microsoft.com/en-us/documentation/articles/create-virtual-network/
2. Create a VM in a new cloud service and choose teh virtual network you have created:
http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-windows-tutorial/
3. After the VM is running, you can create an availability set on the VM in the Configure page of the VM in the managemeng portal.
4. Create a new VM into the same cloud service and add it to the availability set.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

MDM FTP File Server - SFTP?

Looking into what it takes to install and setup MDM. The Master Guide lists a file server as a required component and states to look at the Configuration guide for details. The Configuration guide talks about the FTP protocol and other guides mention it as the FTP File Server.
Can SFTP be implemented instead of FTP? If not are there options instead of FTP. FTP is not permitted for internal data movements in my environment. I saw in the XI forum that XI with the right SP can handle SFTP with a java proxy.
Thanks

Hello:
That FTP Server was just a way to give MDM the files for import, and take the files as export.
You can use anything you want. The file server could be the MDM server itself. You just have to manage how to give MDM something to import, and what to do with the file that MDM will syndicate
I hope this helps
Alejandro

How to integrate File Server with Portal??

Hi all,
can any one tell me that how interegate the File Server With Portal Server??
In my portal server under home tab i have sub tab (second level navigation) of File server.Whe i click this tab it throws an syntax error
ie
System Error
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
Exception Class :: class com.sapportals.wcm.repository.NotSupportedException
Exception Message :: Not Implemented
thease are the steps that i have taken
>created HTTP System..
>created WebDAV Repository.
>Created Cache.
>Created KM WebDAV System.
>Created Iview and in iview i have to specify the <b>Path to Initially Displayed Folder</b>
i have specified the folder of file server that i want to display..
but i get the same syntax error ..
infact i dint get that folder in KM.
But when i specify the folder that is present in KM its Work fine..
Now the Scnerio According to me is that File server is not integrated properly
if it would be integrated properly i would be able to see the folder of File server in KM...
am i correct ??
please Guide me to integrated the File Server Properly??
Points will be given for any help..
Regards
Vinit

Hi Vinit,
if you want some Windows File Server integrated into Portal, please do not use a WebDAV Repository, but use the File System Repository instead. Therefore you need to configure the according Repository Manager. Please refer to this documentation:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm">Integrating Documents from a Windows System into KM</a>
HTH,
Carsten

How to set up file server in Azure Availability Set?

Hi,
We're going to set up file servers with SMB shares on VM:s in Azure.
How do we set up the file services in the VM:s so that it works in an availability set?
I've read something about using DFS. Is that the recommended "Best practice" way of doing that in Azure?
/Andreas
AN

Hi Andreas,
It depends on your needs. If you want to provide redundancy to your FTP services, it is recommended to group two VMs in an Availability Set to ensures that during either a planned or unplanned maintenance event, at least one VM will be
available and meet the 99.95% Azure SLA.
http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-manage-availability/#configure-each-application-tier-into-separate-availability-sets
If you want to set up two files servers in Azure VMs to an availability set, you can follow the steps below:
1. Create a virtual network:
http://azure.microsoft.com/en-us/documentation/articles/create-virtual-network/
2. Create a VM in a new cloud service and choose teh virtual network you have created:
http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-windows-tutorial/
3. After the VM is running, you can create an availability set on the VM in the Configure page of the VM in the managemeng portal.
4. Create a new VM into the same cloud service and add it to the availability set.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to access file server through ethernet BUT internet though wireless

I'm looking for a way to to run my file server network through ethernet while internet access is provided though wireless, but don't want users to have to switch off the wireless when they want to access the file server.
File server is set up at trade shows and the conventions charge a fortune for internet access for multiple users and even more ($6000) for a connection that I'm allowed to put a router on. So I'm considering running my apple router for the file server network without internet access and just having my staff get their internet access from the cheaper wireless access the convention center has throughout the building.
Problem is that I need them to be able to access the file server and the internet at the same time without switching back-and-forth from either network.
Any suggestions? File server and all clients are macs.
Message was edited by: Road Show

Hello,
Here are some good articles for this topic, please see:
sql server connectity over the internet:
http://www.codeproject.com/Questions/433687/sql-server-connectity-over-the-internet
How To Connect SQL Server Through Internet:
http://www.youtube.com/watch?v=VOUDdUJ5BLY
Regards,
Elvis Long
TechNet Community Support

How to migrate File server to NAS device?

All right so here's the scenario.
An external forest level trust is setup between two forests A & B as recently as we acquired the company B.
Users from forest B were already migrated to domain A.
Now I need to migrate file server from domain B to my domain A but the target where we need to move file shares is a NAS device, so basically we cannot do a simple server migration from domain B to domain A.
We need to copy over the data+ACL+Share permissions from fileserver in domain B to a NAS device in domain A whereas of course ACL permissions on file server present in domain B will obviously be as per source domain user accounts, example ACL permissions
currently will show as "B\user1".
So whats the best way to perform this in order to maintain the permissions & data.
Another question how do we copy share permissions from file server to NAS as I can robocopy the data with security permissions but how to copy over all the share permissions to destination NAS?

Hi,
You need to retain the SID History attribute when users across domains to ensure users in the target domain can access to files during migration.
For more detailed information, please refer to the threads below:
ACL migration
http://social.technet.microsoft.com/Forums/exchange/en-US/3c75a116-6bd3-407f-a76c-0d825d4f525a/acl-migration
File server migration using FSMT 1.2 in NAS environment
http://social.technet.microsoft.com/Forums/en-US/fb4bf505-2d95-4409-9777-8fd4a1c0c471/file-server-migration-using-fsmt-12-in-nas-environment?forum=winserverfiles
In additional, you could backup registry key SYSTEM\CurrentControlSet\Services\LanmanServer\Shares to copy share permissions.
Saving and restoring existing Windows shares
http://support.microsoft.com/kb/125996
ADMT and network mapped drives
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9752e31d-2f35-4d7d-ae4d-2f9fe9400bfe/admt-and-network-mapped-drives?forum=winserverDS
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to mirror file server?

I run a small office network with Mac OS X Server 10.4.x doing various services including AFP. My wife and I also work from home and we would like to be able to access remotely various files which are held on the server.
We can do this over the internet, but the connections are not too quick. Ideally I would like to be able to run a mirrored copy of the file server on a little server at home, so that we can access the files locally and then have the servers keep each other up to date across the internet.
Is this possible?
TIA
James

Can anybody help me with this?
TIA

How to change LDAP server setting in Access Manager 6.2

Hi,
We have initially set authentication as a SunONE Directory Server 5.1 (master DS1) in Sun Java System Access Manager 6.2. In both /etc/opt/SUNWam/config/serverconfig.xml
/etc/opt/SUNWam/config/AMConfig.properties
conf files, DS1 was set initially. Also on console's Service Configuration ->LDAP->Primary LDAP Server was set as "DS1"
Now the problem is that I am not able to change the DS1 to the other master "DS2". I set DS2 in both above conf files and also the Service Configuration page as Primary LDAP Server. I restarted the server. When I stopped the DS1, I couldn't login access manager console with any user. It looks like it is still trying to get authentication from DS1.
Does anybody know what I am missing here?
Regards,

After hopeless tries, I finally made it work;) The trick was actually updating the sunKeyValue attribute of the entry:
"dn:ou=default,ou=OrganizationConfig,ou=1.0,ou=iPlanetAMAuthLDAPService,ou=ser
vices,dc=company,dc=com" in one of the master DS I have.
Even though I set DS2 and loadBalancer hosts in all conf files and in Primary LDAP conf in amconsole's Service Configuration, it just didn't work until I inserted loadBalancer host in sunKeyValue attribute.
Hope it helps to someone....
-Bora

FTP File Server

Howdy. I do produce video and audio for people. I am doing a project now where the clients dont even live in the same town or state. I would like to have a Mac Mini set up in the future where i can put the file on the hard drive and then send a link in an email to the client and then have a link or instructions on there to tell them how to get to the file they are supposed to get. That way i can send multi gig files to them and they can down load them on their own time and i dont have to waste discs and postage mailing things over night. I would need something where they can not acess any of the other files for other clients on there only the ones for them. Does anybody know of such a software or how to do it. I am needing something similar to a Digidelivery server made by Digidesign. http://www.digidesign.com/index.cfm?navid=38&langid=100& Thanks for the help.

You might take a look at GroupLogic's MassTransit. Without spending a lot of time comparing features and workflows, it looks like the closest thing on a Mac to the Digidelivery server. If that's overkill, something like Haxial's KDX might work for you.
For additional suggestions, you might try asking in the Mac OS X 10.4 area, since this really isn't hardware related per se, so you don't want to limit just to Mac mini users.
Regards.

How to FTP file and extract the zip file automatically?

Hi,
My app needs to FTP another site and also automatically unzip the transferred file over the internet by user clicking on one button. Any experts? thanks.

How do you open a can of beans before you take it out of the pantry?
However I suppose your question only sounded stupid like that, you didn't really mean it that way. One problem is that you didn't mention which way the transfer was going. I assume you are asking about getting a file and unzipping it? Many of the FTP clients described in the article that jmennen referred to allow you to get an InputStream that allows you to read bytes from the server. You would take this InputStream and wrap it in a ZipInputStream. That way you could unzip the file as you transfer it from the server, rather than having to use a temporary file between the two steps.
But if you really meant that you wanted the unzipping to take place on the server before you did the download, no, you can't do that.

How to FTP file

I want to add some files into playlist in Cisco DMD.These files are on a window server 2008r2.How can i add them into playlist ?what is the url format ?thank you all for answering

Tran Thang,
Assuming your Windows Server 2008r2 server is setup as a WEB Server (not FTP) and the video files can be browsed to; you have two options:
1. Simply add the URL location address for the video file(s) in the DMD Playlist content
2. Add the URL(s) into the Media Library on the DMM. Then simply select the add content and then select the URL from the Media Library on the DMM.
I hope this helps!
T.

Setting output file name in export transaction data package

Hi all,
I am running an "export transaction data" package in the data manager. I wanted to set the output file name so that it will be a constant value. I wrote the following in the package editor:
INFO(%FILE%,\ROOT\WEBFOLDERS\COLMOBIL\VEHICLES1\DATAMANGER\DATAFILES\vehicles_to_pca2.txt)
TASK(/CPMB/TD_FILE_TARGET,FULLFILENAME,%FILE%)
The system run the package and reported success but the file was not created. When i did the same with an existing file name, it was not updated.
When I run the same package with the following PROMPT command instead of the INFO command:
PROMPT(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
The system works fine.
Any ideas?
TIA
Avihay

I am sad to report that apparently Adobe does not do a very good job with the PDF printer. I have just spent over an hour with support to get the answer we can not help you. I guess I will have to spend $50 for NovaPDF to handle my problem. It's a shame when a superior overall product like Acrobat is not able to keep up with the knockoffs on the small things.

How to configure file server with portal using KM

Hi
i have some word documents,excel documents in my computer.i want to integrate these documents into portal using KM.how to do that?can anybody suggest the steps involved or tutorial to do this configuration.thanks for your help in advance
Prasad

Hi,
It´s very simple to do that.
1.You must create repository. (I gave you this information).
2.Create portal users. (in portal or read from ldap)
3.Create KM navigation iview to point folders in your repository.
4.Create roles.
5.Assing roles to users.
For you that is new in this tools, perhaps needs 3 or 4 days.
Patricio.

FTP/File Adapter - Error parsing empty date field

I have an FTP Adapter and I defined a native schema using the JDeveloper FTP Adapter wizard (CSV file). One of the fields is a date specified in this format: "M/d/yyy". I have defined the coresponding element in the schema as follows:
*<xsd:element name="DOB" type="xsd:date" nxsd:dateFormat="M/d/yyyy" nxsd:style = "terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">*
This seems to work correctly and read the date into an xml date variable. However if the date is empty, it just can't figure out what to do and throws an exception saying that it can't parse an empty field.
Is there any attribute that I can add to indicate that the field should be ignored if empty or non-parseable?
I know that I can get the data in as string and do the conversion myself later (which is not trivial either) but why complicate things. I can't believe that the creators of the FTP adapter did not accomodate for empty fields.
Thanks, I appreciate any suggestions.
BTW, I tried adding the "nillable=true" attribute but it didn't work either.
Edited by: user10770892 on Jun 21, 2011 10:38 AM

Yatan,
If I change the nillable true and minoccurs properties, BPEL is not working.
Is there any other way to handle blank lines ?
Thanks

ECATT - How use external file/new variant for input data

Good day,
I want to use an eCATT created by someone else for another request. I want to be able to specify my new input data based on the new request WITHOUT generating a new Transport. Same thing as I'm doing for the CATT ... the CATT is transported but only the input data change depending on the request without generating any transport.
How I build my new input file and how to use it? I tried to download my variant but the only possible format is XML and it's very hard to build a new file based on my request.
Thanks for your help.
Simon

Hi,
Can you tell me how you are generating the xml file. My guess is you are downloading the Test Script/ Test Configuration. In that case it creates an xml file.
As mentioned by Ajay, In Test Configurator / Test Data - you can create the internal variant first, i.e assuming you have already created parameters.. On the top, you have a download button "Download Variant". This creates a .txt file. You can open the file in excell and edit it.
For the next test, you can select external variant and give the modified file path name.
Let me know if this helps.
Regards
Phanidhar

How set FTP file server set in my Data carriar in DMS

Similar Messages

Maybe you are looking for