How set up defaults for Rich Media parms?

My PDFs typically contain a large number of video clips - sometimes as many as 100, with the same particular cluster of parameters needed for every one (floating window, stay open forever till closed by user, no poster, etc.). The current interface forces me to enter these parameters again and again in a set of different dialogs for every single one of these clips one at a time. Then when I inevitably realize later that I need to edit the document, Acrobat's primitive Text Touch-up capabilities force me to return to the source Word document, make the changes there, rebuild the PDF, and go through the same lengthy and tedious process of embedding the video clips and setting their parameters all over again.
I have requested the ability to have a set of parameters stored as a default as long as about seven years ago, but without success. Back then, someone recommended to me a third party company that might be able to do this for me, but at the time, I was reluctant to spend the money. No longer. I'm now ready to pay the piper. Does anyone know of such a company that might rescue me from this Sisyphusean toil? Or some other solution that I'm simply not aware of?
Thanks in advance for your help!
Peyton

Thanks, but as far as I can see, Replace Pages won't do the job either. Either I must go back to the source document in Microsoft Word and make the changes, perform the page replacement, then re-insert the media clips, or excerpt the appropriate pages to a separate PDF and make the changes with the Text Touch-up tool, which does not enable the text to flow to a second page. And in neither one of these means does the text flow to the next page with all other pages flowing as desired - to say nothing of the fact the many of my decisions as to when to make a new page depend on my own judgement in the source document as to margins, when to add a carriage return to prevent splitting of material that should stay together, and so on.
So on your advice I have just submitted a post on this topic to the Acrobat SDK forum.
Thanks again,
Peyton Todd

Similar Messages

How set printer defaults for a printer

My motivation is to have my wife's new MacBook always print double-sided. Currently she needs to select the preset that we've made for printing duplex, but that's easy to forget to do.
OS is 10.4.7
Is there a way to set the printer defaults in this OS?
I want to have duplex just be the default, even after reboot, and if she wants to print single-sided then she'd need to select the other preset.
BTW: If it makes a difference -- We're using a Xerox 8550DP, for which the duplex selection is in the standard place of Print -> Layout -> Two-sided -> Long-edged binding
(Some other printers require using the duplex selection in their own printer's section under that Copies & Pages dropdown menu but not this one.)
Maybe I'm just not a very good searcher. I searched many here, MacFixit, MacWorld magazine, generally on the web. Looked in my David Pogues's Tiger book and Andy Ihnatko's Tiger book. I came up with nothing about setting printer defaults at all.
I bet I can tweek it in a pref file. I hope I don't have to resort to a hack to do something this standard.
Any help or pointers would be greatly appreciated!
PB G4, MacMini (Tiger Server), MacBook Pro Mac OS X (10.4.5)

I think you can do this. Set up a two-sided setting,
and save it. Print with it. Then find the preference
file com.apple.print.custompresets.plist, choose Get
Info, and lock it.
If you want to save another setting, you will have to
unlock it.
Hey this is only a workaround but it is a pretty darned good workaround, especially because it's not too invasive (only locking a pref file at the user level) and what's stored in that custompresets.plist file is com.apple.print.lastPresetPref, which is probably the key to your suggestion. I think I understand it, anyway.
I followed that procedure, created a Custom Preset with duplex turned on which I named "Standard Duplex", then locked the file you suggest that's in my user's home Library. It survived app switching and a reboot. It seems to work great, and I can still use the Standard setting as well if I want to. I even chose the custom setting and although it's locked the temp changes I made were enacted (I chose to print this page, scaled to fit a #10 envelope) and that worked too. The Standard or other presets can still be chosen when you want to use those, and the app remembers the last setting through the rest of the session, it's just that upon opening an app the default is now my custom "Standard Duplex". This does what I want.
I think this is a great workaround. I'm going to go load it onto my wife's MacBook. I suppose I should mark this solved even though there's no real, y'know, user-manual way to do this. Maybe something I'll just hope is a feature in Leopard.
Thank you Bruce and all the other helpful folks who pondered on this one! Heh, I'm sure 1/2 of the tree population thanks you too.
PB G4, Mac Mini G4, MacBook Pro, MacBook Mac OS X (10.4.7)

How can I set a default for webpages to expand to full screen?

How can I set a default for webpages to expand to full screen? Every webpage I go to does not expand to a full screen which causes me to have to ctrl+++ each time. How can I set my preference to expand to full screen automatically?
Thanks.

The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: 
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: 
https://addons.mozilla.org/en-US/firefox/addon/2592/

What software do you use for rich media ad development?

I am a flash designer that would like to start developing rich media ads. My my full-time job, I am designing and developing banner ads but they are just normal banners with clickTags and flashing buttons.
I would like to make them more interesting and widget like too, passing data via the database or allowing users to play and interact some how.
How do you think is the best way for me to learn more about rich media adds? Should I try a trial membership with a place like Eyeblaster? I have heard about their plug-in for Flash that allow you to develop rich media. But is that a good system? Do you know others? What is it like. And do you normally just get into rich media ad dev because of clients or is it mainly used by ad agencies? Also, for those who use it at work or on banners, did you recommend / purchase it or was it purchased by your company? Are you a designer or developer? Does it work with AS 2.0 or AS 3.0 or both?
Thx for reading and any replies thanks so much!
Ms.Lee

Most web advertising is still done with AS 2 because usually an on release event handler is required for tracking the clicks.
A lot of rich media ads are produced by agencies. Or if a website sells banner ads, the company usually purchases the software for the in-house designer/developer to use and charges clients more for rich media ads. Companies like Eyeblaster usually charge based on the file size of the rich media ad, so they usually cost more to serve than regular old banner ads (and can take a lot longer to create) which is why they are more expensive for the client. Some clients want more than will fit or look good in a banner in which case rich media can be a good solution.

Mac mini set to make external drive default for storing media

Running multiple computers in the home how do I set an external NAS device as the default for all iTunes content so it can work with my Mac Mini and AppleTV? Mac Mini does not have enough storage space for all the media and rather than keep music on one computer and movies and TV Shows on another would rather have it all in once place...

Update: I wound up going with a DroboPro, and I wound up filling it with 8 x 1.5TB Seagate drives (purchased for $100 each using this deal from techbargains.com ~
http://www.techbargains.com/tellafriend2.cfm/168063
For under $2,000, I have a 9.36TB single volume of backed-up awesomeness!
I realize alternate versions of this sort of rig could have been made cheaper, but the warm cozy feeling I get in my gut when I look at this beast was worth the extra penny

Two printers with different paper sizes. How to setup defaults for each?

I have two printers connected to my beloved Mini: Samsung ML-1610 & Epson AccuLaser C1100.
First printer uses American Quarto US Letter paper.
Second one - European A4.
Every time I try to print anything on either of them I receive a message from printer driver that paper size mismatched. Further more either printer will wait until I press buttons on them to "proceed". Which is very annoying to say the least.
How can I setup defaults for every printer in Mac OS Leopard? If I use printer preferences dialog it will setup either size for both printers rather than for each its own.
Please advise.

PAHU wrote:
You cannot do exactly what you want from a user interface perspective. I am not sure if such a thing is possible by making changes to hidden files. I certainly haven't heard of it but it may still be possible.
From what I have seen, the page setup dialog is independent of the print dialog. If you set the 'Format for' to one printer, a then choose a different printer when you print, the previous settings won't apply.
You could see if the printer set to A4 supports automatic conversion of LTR to A4. Then at least it won't ask for attention when you send a LTR page to it. Otherwise I think your only option is to check before you print that you have selected the correct paper size for the printer.
PaHu
That's freaking ridiculous!!!
You've got to be kidding me... right?
Even MacOS 8 could do this.
Like it's horrible for me because I print a lot of photos. So I set my default paper type Format for: Canon MP610 series, Paper Size: US Letter (borderless). But then when I go home and print web pages or text documents on my Apple LaserWriter 16/600 PS, then it still remains set to Format for: Canon MP610 series. The freaking OS knows what printer I'm using; why would it remain formatted for the other printer even though that will cut off the edges of all my prints (since the LaserWriter does not do borderless printing) -- and not even warn me?! I just wasted 30 pages!
I cannot tell you how preposterous it is that a modern OS like Mac OS X cannot even get a simple thing such as printing correct. How could they screw up PRINTING?!
-Jon

Setting a default for the Table Headings

Hi all,
the users are asking me if it's possible to set in the Table View of Answer the Display Column & Table Headings = As Table.Column as default. This option can be found in the Table View Properties and you can set the value just for the current request...
Is there a way to set a default value for this option for all the requests?
Thanks in advance.
Nazza

it's stupid, but it works in 9 & 10. probably v8 also, but I can't remember that far back. and it might not work in future releases.
add this to the top of your script:
set termout off echo off feed off pages 0 timing off verify off
rem Determine if parameter 1 is defined. If not, default to "XXX"
spool temp1.sql
select 'select decode(instr(''-' from dual;
def 1
select ''',''symbol 1 is UNDEFINED''||chr(10)),0,''rem fine'',''define 1 = XXX'') from dual;' from dual;
spool off
spool temp2.sql
@temp1
spool off
@temp2
set termout on
put your code here
and of course, it leaves two files (temp1 and temp2) in the current directory. so, you can add o/s dependent delete statements via a host command. or just leave them. you're call.
Message was edited by:
shoblock
forgot the "set" commands at the top
AND...
set termout back on at the end (along with echo or whatever else you want).
and I changed from defaulting &1 to a value of "1", to a value of "XXX". should make it easier to follow (I hope).
and finally, thanks to Ron who helped me figure this one out (many years ago)

How set diff. timeouts for entity beans?

How do i set diff. timeouts for diff. entity beans? Is it in the ejb-jar.xml file? Is this refreshed every time it is accesses?

Hi there,
Although not familiar with all of the App servers on the market, I'd say that you are unlikely to find a timeout value for Entity Beans. Passivation of Entity beans is normally a function of the commit options supported by a specific App server. For example, with Commit Option C an entity bean instance should always be returned to the instance pool after a transaction has completed. You can find details of the various commit options in the EJB specification which you can view or download from:
http://java.sun.com/products/ejb/docs.html
Hope this helps
Amanda
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers

On Windows 10 How to reset Default for Screen color?

I went to settings, then clicked Personlized then clicked color and then I believed I clicked Themes after that I not sure but I ended up where the backround is black and colored type. I clicked apply and now after seeing how it is I do Not like it at all. So, I have been trying to find how I can reset the color Default back to the orginial way it was. But, I cannot find Default for color any where and just trying to chose colors dooes not help because I had been in a different area where they were only showing 4 r 5 chices which were all the reverse look of all Black backrounds with color type. Can someone please give me the steps so can get my screen color back to normal ? Please, do know I will be both grateful and truly appreciate the person who will be very kind in extending their knowledge and help to me. I Thank You

Booting from a CD (with the port you want to reset active) does not use the resolution stored on your Hard drive, and generally defaults to safer lower resolutions.
If using Mac OS 9, you can then go to the Hard Drive and discard the Display Preferences.
If using Mac OS X, you may find that preference in:
<your_id>/Library/Preferences/ByHost/com.apple.preference.displays.<your Mac's ethernet id>.plist

Is there any way to set the default for *.doc document so that Pages opens them automatically?

I have a number of Ms Word documents because I used to have Word for Mac before the last OS release. Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
Now Pages will open these files. Is there any way to change the default for *.doc files so that a double-click will open them in Pages?
(Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
Walt

How to set RAW defaults for Contrast and Brightness?

When I open a RAW fole in PS Elements 8 the Brightness set to 50 and the contrast set to 25.
How to set these two values to 0 (zero) as a defaults when a RAW file opened for the first time (defaults).
Thank you for the help.
Leo

I think you can set presets in camera RAW (I'm at work now so I can't tell you the exact method), but setting contrast and brightness to zero gives you an ugly image, and you will most likely move the contrast up and the brightness up, so I'm not sure you are really gaining anything by having a default of 0 contrast and 0 brightness.
The defaults chosen by Adobe are reasonable.

How to do you set the default for a radio radio button

I am having a problem setting a value in my code.
I would like to default a value for the radio button.
I think I need to use some java/javascript using the cattributes option but I
am not sure what I should be saying.
The example is provided below.
>>>>>>>>>>>>>
htp.tableRowOpen;
htp.formRadio('in_prior_no','1',chkd);
htp.p('1');
htp.formRadio('in_prior_no','2',chkd);
htp.p('2');
htp.formRadio('in_prior_no','3',chkd);
htp.p('3');
htp.formRadio('in_prior_no','4',chkd);
htp.p('4');
htp.formRadio('in_prior_no','5',chkd);
htp.p('5');
htp.tabledata(); htp.br;htp.br;
htp.tableclose;
<<<<<<<<<<<<<

As far as I know, iMovie version 10 is only accurate to .1 seconds or 3 frames.
I think you could only get down to 5 frames in version 9, though you could display frames s you mention.
Matt

How do I set a default for folders to be read & write

I have an IMAC with OSX v10.6. I am on a network with a few other computers. My disk is used to house shared folders. When I create a new folder or file from Word it is set to "read only" and I have to go into the file info and set it to "read & write". This may be a simple fix but I would like to know how to change my preferences to fix this issue.
THANKS!

The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: 
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: 
https://addons.mozilla.org/en-US/firefox/addon/2592/

How do I assign a folder on a non-boot drive as default for certain media types?

I want the default folder for iTunes, iPhoto, Aperture, iMovie and iDVD to be on separate drives from the boot drive. Hoe do I change these individiually?
Also - what is the best way to create an automatic mirror of them onto other drives?
For example, 4HD (3 plus boot) plus external case with 5 drives, so drive number 1-9:
iPhoto drive 2 - mirror drive 5
Aperture drive 2 - mirror drive 6
iMovie/iDvd drive 4 - mirror drive 9
iTunes drive 3 - mirror drive 6

wow - thanks for all the great replies! just me and the crickets here...

How do I set the default for when I open a new tab? It keeps opening to see strange search window.

The answer that came up only applies to Windows - I am using a Mac.

You can check the browser.newtab.url pref on the about:config page.
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
See this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
You can use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

How set up defaults for Rich Media parms?

Similar Messages

Maybe you are looking for