How should I combine 30 fps clips and 24 fps clips into a project?

I have both 30 fps footage and 24 fps footage and I would like to create a project that has both. Should I create a 30-fps project or a 24-fps project? Which one will look better?

A little bit. Mostly just playing around.
I would start with 30fps so you can preserve the higher frame rate.
Another consideration is how much of your content is 30fps and how much is 24fps.
If you're doing a lot of this kind of thing you may find the FinalCut Pro X handles it better.
Matt
Message was edited by: Matthew Morgan

Similar Messages

  • How do I combine separate audio and video files into one Quicktime movie?

    I have DVDs that contain separate audio and video files in folders marked Audio_TS and Video_TS. I would like to know how to combine these files into a single Quicktime movie. Is there inexpensive or shareware software that imports and unites these files reliably? A simple solution is preferred, rather than getting into complex media editing applications.
    G4 eMac   Mac OS X (10.4.9)  

    Doug - the VOB files (in the VIDEO_TS folder) are MPEG-2 files. MPEG-2 have the video and audio mixed into the one file - there are no audio files to combine.
    The rest are directions to a DVD player (e.g. the BUP and IFO's) . The AUDIO_TS folder is used for DVD Audio discs and on video DVDs is always empty.
    Many people use Handbrake or iSquint to convert VOB to iPod video though MPEG Streamclip is the best - open the first numbered VOB and it will prompt you to open all of them. ALWAYS fix timecodes when it asks. You can then edit/trim and export to MPEG-4.

  • How do you combine two or more movie clips into one movie clip in iMovie '09

    how do you combine two or more movie clips into one movie clip in iMovie '09

    First create an iMovie project. Then drag the clips (or portions of clips) that you need into the project.
    When finished, use the SHARE menu to share the project.

  • I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

    I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

    1-800-676-2775  apple support   tech support 1 800 275 2273
    If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
    click the apple----->click about this Mac ------> click on version----> until you see the serial number.  You may have to do this a couple of times if it freezes before you have all the numbers.  A camera might help.
    Good Luck

  • I am the account owner in charge of purchases but the software will be used by different people - how should I do the download and install for them?

    I am the account owner in charge of purchases but the software will be used by different people - how should I go about downloading and installing on people's computers?

    If you need several copies of Acrobat (the license is per user), then you should talk to Adobe Sales about a volume purchase. I am not sure of the details, but probably the best way to go. In that case, I think all are on the same S/N and you pay according to the number of activations or such. Again, I am not sure and you need to talk to Adobe. Adobe is currently pushing the cloud and subscription versions and you might want to discuss the various options with them.

  • How do I combine my three apple id's into one account, purchases?

    How do I combine my three apple id's into one account, purchases?
    These apple id's used different email accounts.
    I would like to close down the two other apple id's and use only my iCloud account.

    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with another Apple ID with a new Apple ID.
    The only way to get down to one Apple ID is to abandon content from the other two, or abandoning the idea of ever updating anything from the other two.

  • How do I get my photos and music back into new version iTunes from my iPad?

    I have the new version of iTunes (11 0 2 26) for Windows which installed over my old copy. I see none of my music etc even after it claims to have synced and backed up. How do I get my photos and music back into iTunes from my iPad? It syncs OK with calendar and contacts from Outlook and I can force copying of apps and books but why does it not show music and photos in the iTunes library? help please.
    David

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    tt2

  • How can i add the dimensions and data loading into planning apllications?

    Now please let me know how can i add the dimensions and data loading into planning apllication without manuallly?

    you can use tools like ODI or DIM or HAL to load metadata & data into planning applications.
    The data load can be done at the Essbase end using rules file. But metadata changes should flow from planning to essbase through any of above mentioned tools and also there are many other way to achieve the same.
    - Krish

  • Can any one tell me how to include the company logo and some poictures into the Teststand report

    1. Can any one tell me how to include the company logo and some pictures into the Teststand report?
    2. How to include the waveforms into the report?

    http://zone.ni.com/devzone/cda/epd/p/id/3619
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • HT1918 how can i remove my billing and change it into a free apple id user?

    how can i remove my billing and change it into a free apple id user?

    iTunes Store: Changing Account Information
              http://support.apple.com/kb/HT1918
    Select None under your payment method.

  • How to embed the Word Document and PDF file into Crystal report?

    How to embed the Word Document and PDF file into Crystal report?
    I have word doc which having 10 pages. I need to show all of the 10 pages at a time. I tried OLE object but problem is it shows only one page.
    Is there any solution to show word doc / PDF file in CR?

    Symptom :
    When embedding a pdf document into a Crystal Report, only the one page shows.
    Reproducing the Issue
    Environment:
    Crystal Reports OLE object
    Cause
    An OLE object only displays the first page.
    Resolution
    Embed multiple objects, one for each page
    Or
    Use a hyperlink to the object instead
    Hope this helps!
    Regards,
    Vinay

  • [svn:osmf:] 15449: Add example showing how to inject a live NetConnection and/ or NetStream into a VideoElement.

    Revision: 15449
    Revision: 15449
    Author:   [email protected]
    Date:     2010-04-15 12:57:20 -0700 (Thu, 15 Apr 2010)
    Log Message:
    Add example showing how to inject a live NetConnection and/or NetStream into a VideoElement.
    Modified Paths:
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/AllExamples.as
    Added Paths:
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/netconnection/
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/netconnection/SimpleNet ConnectionFactory.as
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/netconnection/SimpleNet Loader.as

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • Clips do not load into iMovie Project Browser

    I have imported a full feature Creative Commons movie into iMovie to edit for a short music video.  It downloaded in MP4 format and originally loaded into the Project browser but would not let me split clips.  I've tried converting it to .MOV in MPEG Streamclip and now the clips don’t even show up in the Project Browser.  I see the clips in the Event Browser but they will not load into Project Browser.  I've tried converting it to .MOV in Quicktime where I was able to split a clip.  I then tried to import that whole movie file into iMovie but it won’t import.  What am I doing wrong?

    When I have the iMovie Library (with the sub-file which iMovie-generated titled of “2015”) selected in the Sidebar the clips show in the Event Browser window but not in Project Browser window. The sub-file to “2015” is my movie name.  When I select this file, the Event Browser goes black with white-lettered words: “No clips found.”  There are no clips in the Project Browser as well.

  • Imovie won't let me drag the songs from the music and sound effects into my 'project'... I have tried everything, restarting itunes and imovie, dragging the songs to my desktop and then onto imovie, youtube tutorials...

    imovie won't let me drag the songs from the music and sound effects into my 'project'... I have tried everything, restarting itunes and imovie, dragging the songs to my desktop and then onto imovie, youtube tutorials...

    Don't drag them, import them from Media.

  • How can I match sound quality between video clips and audio clips?

    Hi guys,
    First of all let me say that I enjoy using the latest Media Encoder. However, as a novice, I have two related problems.
    1.I am recording video to use with PowerPoint slides in Adobe Captivate. I am encoding the video with best quality FLV. This produces very good video,
          but with a degraded audio track, even though I had filtered the audio in soundbooth. The post encoding sounds like it did before Soundbooth corrections.
    2. Some of the video recording has been set cut into audio clips to be used as background narration behind PowerPoint. The logic behind this is: that if both are
          recorded at the same time, the voice quality should match.
    This is far from the outcome. I have tried MP3 for the audio which of course produced the best sound- but is entirely unlike the rest of the video. I have also encoded the audio with Windows Waveform preset figuring that since the soundbooth edit was a .wav file, that there should be a reasonable match. Wrong again!
    So, the audio quality of all clips is poor, and the difference between the encoded video clips, and the audio encoded clips spoils the otherwise professional result in Captivate.
    Please help, all of you experts.

    Thank you.
    OS Windows 7 x 64; 3.2 MHz; 2 TB; 12 GB Ram-9GB ram allocated to Adobe.
    My process is this:
    1. The whole video and audio narration material is shot in one continuous video sesseion.
    2. The microphone is only mono, but the camera is set to stereo. Noone can work out how to change the camera to mono.
    3. In Premiere Pro 5, I select render and replace in SoundBooth.
    4. In Soundbooth, I choose Add Multichannels.
    5. In Multichannels, I delete the unwanted noisy channel, and any other unused channels.
    6. With the remaining mono channel, I then select Export and Save As option, then Stereo.
    7. Next I edit the stereo channels as needed.
    8. The imported stereo won't automatically update in Premiere Pro, so in PPR I import the new edited stereo track.
    9. I test this track in PPR, to check that it is playing R & L channels. It is. OK.
    10 On the timeline, I proceed to cut apart this single stereo wavelength .
    11.These clips are saved as Video, or Audio subclips.
    12 From the video subclips, I export to Media Encoder, and choose either FLV4 match attributes (High Q). This I modify to custom 2 pass (Custom save).
         The summary says that this is saved to MP3 Stereo.
    13. I import this into Captivate 5, but the Video outcome is Left channel only. I have tested this on Media Player/Real Player where it is also L channel only.
    14. I export my Audio subclips to Media player, and select MP3 option and this summary also reports stereo. The Audio outcome is stereo, when played in any player and in Captivate 5.
    I cannot understand how a single, continuous track edited uniformly in Soundbooth to stereo, can produce different outcomes in Media player.
    I would so appreciate a solution to this problem, because, in the Captivate 5 e-learning production, the switch between stereo audio (behind PowerPoints), and l. channel video is distracting. Naturally, the l. channel only is a thin sound. It is as if it had never been edited in SoundBooth at all.

Maybe you are looking for

  • "GUID partition table scheme"  Can't install snow leopard on my mbp.

    I have a mbp that is partitioned as half mac, half XP.  I put in the snow leopard CD and came up with an error that said I could not istall snow leopard because my partition did not fit the "GUID partition table scheme".  I followed the menues to the

  • Mail won't go online

    When I click Get Mail I only get the triangle by the Inbox. The error message is "The server XXXX refused to allow a connection on port 995". This is the port that has always been in use. This is a pop3 account. I have checked all settings and verifi

  • Defect in Acrobat XI for mac osx

    Using Acrobat XI for mac osx I opened a bank statement pdf. I redacted the account numbers. It gave me option to remove hidden metadata. I removed the hidden metadata. I saved the document and it removed character "I" from many places in the document

  • TS3899 How to cancel a sent file that seems too big to be sent - but keeps trying thus draining the battery?

    How do I cancel a file that is trying to be sent but seems too big to be sent - it keeps trying to send andconstantly drains the battery. Sandy

  • FPL9 and authorisation objects

    Hi We use ISU 4.72 and users access FPL9.  We need to restrict certian users from accessing the budget billing and installment plan icons.  There appears to be no associated authorisation checks performed and the t-code remains the same also Thanks A