How should I connect these two AirPort networks?

Hi all,
I have had to reset both of my networks; one an AirPort Extreme and the other an AirPort Express. As it stands, the Extreme has a USB printer and a NAS drive connected to it, while the Express is my gateway to the internet. Right now I have to switch networks to either access the internet, or print.
I'm open to suggestions on how to connect these two networks. My goal is to be able to printer, connect to the internet, and connect to the NAS drive without switching networks.
Thanks for any suggestions.
Ed

One option would be to configure both of your base stations in a Wireless Distribution System (WDS). In this type of configuration, you'll be able to both access the Internet and/or print without having to change wireless networks.

Similar Messages

  • LCD projector to MacBook Air - I have thunderbolt, how do I connect these two machines?

    I purchased an IPEVO Ziggi HD, how do I use this with LCD projector? I have MacBook Air which has thunderbolt and HDMI...

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • How do I connect my existing wifi network to a new Airport network?

    Right now I have two wifi networks. The one that connects to the Internet and one that's for AirPlay and has no Internet connection. How do I connect the two? The desired outcome would be to have one network that connected to the Internet and also could connect to my Airport. Please help! Thanks!

    Is the wireless network for Internet access provided by another AirPort (Express, Extreme, or Time Capsule) router?

  • HT4356 I  from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!

    I  am trying to airprint from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!

    Make sure you have a AirPrint enabled printer.
    http://support.apple.com/kb/ht4356

  • Can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option.

    can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option. i want to have both the airport extremes to use a single imac for streaming music or video to my apple tv's at different places where one apple tv is in the range of one airport extreme.it's not a problem if both airport extremes have different wifi id's with separate internet.The imac which i use for streaming the music and videos is only in the range of only one airport extreme.is it possible if i can stream music or videos to my apple tv which is not in the range of same airport extreme which i use for imac but in the range of other airport extreme.
    Finally what i need is i want to use two internet networks as my highest possible internet bandwidth is about 1mbps.and i know that i cant mix both the networks and make it as 2mbps.

    Yes, that is possible. Please check out the following Apple Support article for details on how.

  • How should i connect my new macbook air to lcd projector for presentations?

    how should i connect my new macbook air to lcd projector for presentations?

    One of these should work, depending on the projector. Just note both will not allow you to play protected movies on the projector.
    VGA
    http://store.apple.com/us/product/MB572Z/A?mco=MTY3ODQ5OTY
    DVI
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

  • My iphone will not connect to the airport network since I added a security password. The ipad connected immediately. Is there a setting on the phone that I need to change?

    My iphone will not connect to the airport network since I added a security password. The ipad connected immediately. Is there a setting on the phone that I need to change?

    Answered this question with a reply from "how does an iphone forget a network" response

  • System Doesn't Automatically Connect To My Airport Network

    My MacBook Pro (10.4.10) no longer automatically connects to my airport network (snow model). Airport Admin Util v. 4.2.3.
    My wife's iMac also needs to manually find the network. This wasn't the case until recently.
    Any suggestions?

    Do you use AirPort's "Preferred Networks" setting when connecting to the base station?
    If so, try the following:
    1. Delete Preferred Network(s)
    o System Preferences > Network > AirPort > Configure
    o In the "By default, join:" pull-down menu, select "Preferred networks"
    o Delete the network(s) you regularly use from the list
    2. Delete AirPort Keychain Entries
    o Launch the "Keychain Access" application located in Applications/Utilties.
    o Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    o Restart, or log out then back in.
    3. Add Preferred Network(s)
    o System Preferences > Network > AirPort > Configure
    o In the "By default, join:" pull-down menu, select "Preferred networks"
    o Add the preferred network(s) using the "+" button.
    o Restart or log out then back in.

  • How should i use the two results sets in one single report data region?

    Hi frnz,
     I have to create a report using the below condition...
    Here my given data  set query gives you the two result sets ,so how should i use that two result sets information in single report....when i accessing that data set query it will take the values off the first result set not for the second result set.
    without using sub report and look up functionality..... if possible
    is there any way to achieve this.....Please let me know..
    Thanks!

    You cant get both resultsets in SSRS. SSRS dataset will only take the first resultset
    you need to either create them as separate queries or merge them into a single resultset and return with ad additional hardcoded field which indicates resultset (ie resultset1,resultset2 etc)
    Then inside SSRS report you can filter on the field to fetch individual resultsets at required places. While merging you need to make sure metadata of two resultsets are made consistent ie number of columns and correcponding column data types should be same.
    In absence of required number of columns just put some placeholders using NULL
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • How can I get these two results in two different columns?

    SELECT COUNT(attr_id)
    FROM pv_attribute
    WHERE port_id = 322;
    SELECT COUNT(attr_id)
    FROM pv_attribute
    WHERE port_id = 323;
    How can I get these two results in two different columns?
    Thanks

    So Jens made a tiny mistake with the column name... shame you couldn't be bothered to research Pivoting so you could have corrected the mistake (possibly it was deliberate *{:-) ) and learnt something.
    with pv_attribute as (select 16123 attr_id, 322 port_id from dual union all
                          select 16123 attr_id, 322 port_id from dual union all
                          select 19223 attr_id, 322 port_id from dual union all
                          select 11193 attr_id, 323 port_id from dual union all
                          select 13163 attr_id, 323 port_id from dual)
    -- end of test data setup
    select sum(decode(port_id, 322, 1, 0)) cnt_322,
           sum(decode(port_id, 323, 1, 0)) cnt_323
    from   pv_attribute
    where  port_id in (322, 323)

  • HT3669 I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS.  Is it possible to connect these directly without networking?  Where can I find the printer driver?

    I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS.  Is it possible to connect these directly without networking?  Where can I find the printer driver?

    It turned out that WD is the big bad guy in this game.
    According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
    So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
    Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
    On the other hand, with WD GP 1Tb there is no problems at all for ages.
    thanks guys, thread is closed

  • How can I combine these two DAQ tasks???

    I am using LabVIEW 11, Windows XP, cDAQ-9174 chassis, two NI-9205 modules.
    Please see my code for reference. I am very new so i will accept all suggestions.
    I am acquiring 12 volatage signals in a producer/consumer structure giving me a queue of 1-d array of waveform(dbl). Then I am acquiring 12 voltage signals in another loop giving me 2-d array of waveform(dbl).
    There is an issue creating the channels. How can I combine these two tasks?
    Thanks,
    ~Chris
    Attachments:
    WaveTest_6.2.vi ‏558 KB

    Hello chrisbe723,
    When you say that there is an issue creating the channels, are you getting a specific error message when running your code? Also are you referencing the same set of channels for the two DAQ task you are configuring?
    Paul-B
    Applications Engineer
    National Instruments

  • How should I connect yamaha HS50m to macbook pro

    how should I connect yamaha HS50m to macbook pro? Does macbook pro with i7 processored have an enough sound card for yamaha studio monitors?or will I need an external sound card or mixer?

    Some mikes have sufficient output to connect to this port, Alexey, but most don't. the solution, if you really want to use this particular mic, is to obtain a small battery or mains powered pre-amplifier to connect between the microphone and the line -in input. Alternatively there are devices which will allow you to connect your existing mic through the USB port. If you have an amplifier with a mic input already you could also use this as an intermediary, though it won't be very portable, of course!
    You may find it cheaper to simply buy either a USB or "line level" mic, though.
    Cheers
    Rod
    Cheers
    Rod

  • I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

    I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

    iTunes Store > Purchased > Music > Not on this computer.
    tt2

  • How to configure connectivity between two vm linux hosts

    Hello All,
    i have installed vm workstation with two RHEL4 linux installation.
    Node 1:RHEL4
    Node 2:RHEL4
    i have configured 2 ethernet cards am able to ping in a host but not each other.
    i have tried to ping from Node 1 to Node 2 am getting icmp_seq=0 Destination Host Unreachable .....
    kindly suggest how to configure connectivity between two host permanently.please explain with example if possible. or suggest any link.
    thanks,
    Mike.

    1003614 wrote:
    thanks for quick reply ....Oracle vm workstation 4.2 am using.
    ... then your post is now moved to the appropriate forum space for your question (Oracle VM for x86).

Maybe you are looking for

  • Issue in New Asset Accounting

    Hi Experts, We have activated the new Asset accounting Datasource (0FI_AA_20) delivered as a part of EHP4 reporting financials. Now ee have replicated the datasource in BW and the model is activated. The model contains 2 cubes: 1 Basic(C20) and 1 Vir

  • NWBC - Actions open in a new window

    Currently all actions that I have created or found (SAP delivered) open in an external window, outside of NWBC.  Is there a way to force an action to open in the same window as the NWBC client?

  • How to stop the configuration wizard

    Hi , I am running a configuration task(wizard based) in NWA(netweaver administrator).  during the wizard, I lost internet connection, when I connected again, the application expired. I want to reexecute the wizard, but its status is "Currently execut

  • Is it possible to buy additional storage in CC

    is it possible to buy additional storage in CC

  • Upgrading os 9.1 to os x (imac)

    hi bought this imac dv indigo from ebay. it has os 9 ver. i want to install new mac os x but there aremany version within os x are there. what should i do. and how to do it. can i install windows as well with os x.