How should I do JavaCard Applet for ROM masking?

My name is richard. I am developing present JavaCard applet.
Point of doubt one occur .JavaCard Applet loads to EEPROM in Post Issurance form usually, how should I do JavaCard Applet to do ROM masking?
Do you need frontier of special code if is possible?

Short answer is yes.
Click the request for consultation link in Digital Publishing Suite Help | DPS pricing options to receive a price estimate for the DPS license your project.

Similar Messages

How should I download iOS 8 for my iPhone 5s?

How should I download iOS 8 for my iPhone 5s?

If you typically sync your iPhone to a Computer with iTunes than that would be a good first place to start. As you would know, once your iPhone is connected via the lightning / USB cable to the Computer and iTunes is open you can click on the box that says "iPhone" and you will go to the Summary page on the computer screen and it will say that iOS 8 is available. Just click to Update. After a few seconds it should give you an estimated time to complete the Download (but not the time of the complete install process). Alternately you could just go on your iPhone 5s to Settings>General>Software Update and see if it says iOS 8 is Available to Install. Click to Update and just set the iPhone down in front of you and watch as it goes through the process. Either way should work fine.

I am moving to another continent. How should I register and pay for Creative Cloud?

Hi. I am currently living in Korea, but I am going to move to Germany soon.
Then I might also work in different country in Europe later.
Then how should I make a registration for Creative Cloud, and how should I pay?
Please help me.

Hi Alfred,
I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
1) Go to Start button>> Control panel>> Uninstall a program.
2) Check if you see Browser safeguard there, if yes then uninstall it.
3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
-Ankit

How can I sign My applet for IE and Netscape without JavaPlugIn?

I think we can sign our applets with Javasigner.exe but this certificate is not being
supported by IE and Netscape. If you want to use this certificate with IE and Nets.
you must install JavaPlugIn to all users. I dont want to choose this way.
I think we have one alternative for this purpose.
For Netscape: Signing Tool
For IE: The program that included SDK-Java
But I could not find SDK-Java any where.
I think Microsoft have gave up to support the Java certification...
I am not sure.
How can I prepare signed applet that can be run on IE and Netscape?
This applet will have some permissions.

The tool you need for signing cab files for the MS JVM is signtool.exe. I beleive that the .NET version of this tool can be used, as the signing process was not Java specific. You do need certificates in a different format than for jarsigner or the netscape signing tool. Verisign will happily sell you two different certificates, but there is probably a way to convert between formats using openssl or similar.
You'll also need to package your files in a cab instead of a jar. cabarc.exe is what we use here. Again, it does not seem to be Java specific, so you can probably still find it despite Microsoft no longer making their Java tools available.

How should I start my project for editing MP4 in Premiere E9

Hello,
I am new to the forums and to video/picture editing in general. The main disconnect I have is with all the different formats and such.
Long story short. I have Premiere elements 9. Im using a Flip Ultra HD (to my understanding it produces MP4).
I was wondering if someone could point me in the direction of the most accurate way to start my project in Premiere elements 9.
Thank you very much in advance to anyone who may be able to help.
-Jeff

You should select the Settings for a Flip Mino/Ultra HD project, then use Get Media to get the files from your camcorder into your computer.
You can see how to set up a project and get media in the first couple of tutorials in my free 8-part Basic Training tutorials at Premiere Elements support site Muvipix.com.
http://forums.adobe.com/thread/537685?tstart=0

How should i write a pcr for this requirement?

Dear Friends,
       Can any tell me whether we can write a pcr in such a way that if the person resigns the company on any day after 15th his full absence quota(for that month) should be accrued.
      if yes can you tell me
      what are the key decision parameters i have to use in writing the pcr.
        waiting for you kind reply.
Regards,
Sai Prasad.

Hai Prasad,
I can give you the logic, cannot write exact rules.
While genegarting absence quota
- Check for termination action using OUTWPMASSN
    - If yes
          Check for Action year current year. (HRS=YSAY, HRS?CURYR)
              - If its equal to 0
                  Check for current month (HRS=YSAO, HRS?CURMO)
                       - if its equal to 0
                              check for current day (HRS=YSAA, HRS?CURDY
                                    - if its >=15
                                         generate quota
                       - Exit
(Note: for this logic you have to generate monthly quota)
With regards
Shyam V

How should we identify Master Data for a particualr module.

HI SDN,
In an implementation scenario, suppose I am doing 1 standard cube. How do I identfy, the necessary Master data required for this cube.
Is there any specific stategy on which I can safely assume that I have identified and loaded the required master data for the particular infocube.
Regards,
Nitin

Hi Niteen,
While designing your infocube you will have a set of characterstics and key figures.
For characteristics you need to check if they are being used in other infocubes as well, or you nered text for them or not.
Judging on these parameters you can select which all characteristics in your cube need master data.
Regards.

How should i solve the problem for the exception.

Web is below:
Error when processing your request
What has happened?
The URL http://xxxxxxx.xxxxx:xxxxxx/sap/bc/bsp/sap/xxxxxxx/result.htm was not called due to an error.
Note
The following error text was processed in the system D50 : The current application triggered a termination with a short dump.
The error occurred on the application server sapcidev01_D50_00 and in the work process 1 .
The termination type was: RABAX_STATE The ABAP call stack was:
Form: DIALOG_CHECK of program CL_IMC_MODE===================CP
Form: PREPARE_MODE of program CL_IMC_MODE===================CP
Form: GET_MODE_BY_NAME of program CL_IMC_MODE===================CP
Form: SEND_COMMAND of program CL_DV_IMC_CLIENT==============CP
Form: PROCESS_COMMAND of program CL_DV_SDV=====================CP
Form: DISP_DOC of program CL_DV_SDV=====================CP
Form: DISP_AO_DOC of program CL_DV_SDV_AO==================CP
Form: DISP_AO_DOCS of program CL_DV_SDV_AO==================CP
Function: ALINK_DISPLAY_IMC of program SAPLALINK_DISPLAY_DOCUMENT
Function: ARCHIVOBJECT_DISPLAY of program SAPLOPTA
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system D50 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapcidev01_D50_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server sapcidev01_D50_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 151 -u: 117846 -l: E -s: D50 -i: sapcidev01_D50_00 -w: 1 -d: 20070320 -t: 062938 -v: RABAX_STATE -e: MESSAGE_TYPE_X
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Run ST22 and information is below:
Source Code Extract
Line SourceCde
1 METHOD DIALOG_CHECK.
2 DATA: GUI_FLAG TYPE SY-BATCH.
3
4 * IMC NUR in Online-Modus ? (kein Batch und dunkle Batch-Input-Betrieb)
5 IF GUI_IS_ON IS INITIAL.
6 CALL FUNCTION 'RFC_IS_GUI_ON'
7 EXPORTING
8 LOGIN_CHECK = ' '
9 IMPORTING
10 ON = GUI_FLAG.
11
12 IF GUI_FLAG <> 'Y'.
13 IF RABAX IS INITIAL.
14 CLEAR EXISTS.
15 ELSE.
>>>>> MESSAGE X005(IMC).
17 ENDIF.
18 ELSE.
19 GUI_IS_ON = 'Y'.
20 EXISTS = 'X'.
21 ENDIF.
22 ELSE.
23 EXISTS = 'X'.
24 ENDIF.
25
26 ENDMETHOD.
i can access the other bsp web.but this bsp application raises the exception. Who can help solve the problem?
I appreciate your help.

Is it SAP BSP application or custom?
If its custom,check whether you are using any MESSAGE statements. Handle all the Exceptions from Class/Methods/Function module to avoid the Dump.
Raja T

How should we setup electronic signatures for tax preparers?

I'm confused with all of the options. We'd like to start having our in house tax preparers sign returns electronically. Once signed, they need to confirm no further changes will be made to the return. They would like to then print the document, have the tax payer sign, then submit the return electronically. I'm not sure this is the best option, but it is what they are looking at doing. Any other tax preparers out there? Any suggestions?
Thank you in advance.

Either.
I must confess to admit, I’m not sure which one would be better for my needs. As a beginner, I guess I’ll need something that’s easy to manage (for both myself and the company) while able to prevent users from signing as someone else.

How should i write a query for this?

Hi i give the follwing query to implement the result,
IT will gives you the result of one country machines information like Total machines failed machines and success machines of their count
Countyr Name CountryCode Total Machines Failed Machines and Succes machines and their perentage
IT ITALY
1000 20
980 98%
like these i want to display the 16 countyr machines information all country information in one palce like table format
i will give you the query to the below here it is the combination of powershell code also used here with sql code.
Code as Country
Name as Country
And below i mentioned OU in bold every where i will put the country code according to the country
like OU=FR
Select
        'FR' as 'Code',
        'FRANCE' as 'Name',
        (select COUNT(*) from ADComputersInfo where
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    (select COUNT(*) from ADComputersInfo where
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations_Indus,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    (select COUNT(*) from ADComputersInfo where
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Servers,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    (select COUNT(*) from ADComputersInfo where
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    or
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations_Indus,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    or
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Servers,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    (select count(distinct(cn)) from ADComputersInfo where
    (ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    or
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations_Indus,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    or
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Servers,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com')
    and cn in (select name0 from v_R_System)
    (select count(distinct(cn)) from ADComputersInfo where
    (ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    or
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations_Indus,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    or
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Servers,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com')
    and cn not in (select name0 from v_R_System)
    select count(distinct(cn)) from ADComputersInfo where
    (ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    or
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations_Indus,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    or
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Servers,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com')
    and cn in (select name0 from v_R_System where Client0 =1 and Obsolete0 =0)
    select count(distinct(cn)) from ADComputersInfo where
    (ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    or
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Workstations_Indus,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com'
    or
    ObjectPath like 'LDAP://eur.gad.schneider-electric.com/CN=%,OU=Servers,OU=FR,OU=Countries,DC=eur,DC=gad,DC=schneider-electric,DC=com')
    and cn not in (select name0 from v_R_System where Client0 =1 and Obsolete0 =0)
So here i pass the County code and country name and OU=FR(assigned country code )
so hw we can all these 3 values in all the query can give me the r8 query for this . And i will get the all 16 country information
Ineed exact query hw we can implement..........................................
I might be excepting lot from our side guys...
Thanks !
Advanced

Hi
Can you simple post sample data + desired result? Always state what version you are using..
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How should i change my password for itunes account?

i want to change my password as i think someone else is using it but the problem is i have no idea wht are the answers to my security question. So plz help me change my password without dealing with security ques. Oh n there is an email option too but i never get the password reset email on my email address. So what should i do? i need to change it urgently. Thanks

Forgotten security questions - https://discussions.apple.com/message/18402551
More involved forgotten question issues - https://discussions.apple.com/thread/3961813
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37
Are you sure you entered the correct email address in the information window when you did all that? Have you checked your junk mail folder?

How should I save Tritone image for import into InDesign?

Photoshop only gives me 4 file format options, and InDesign CS4 only accepts one, .EPS
Otherwise I got the error, "This files uses an unsupported color space."
There are several .EPS options. I chose "Single File with Color Composite". However, I'm concerned because the image looks fine in Photoshop but a little faded when I import it into InDesign and then export it as a PDF.

See the reply to your existing thread.
Mylenium

How to use the Validate step for Approve step

Hi Experts,
I have modeled a workflow with the steps start,process, validate, approve, process and stop.
Process is set to owner and approve is set to some other user user1.
My requirement is as follows :
1) Approve the records by approver and then it should send it to the next step for further processing
1.1) if the approver did not approve the record it should send a error message until the record is approved. So it should not send it to the next step when record is not approved
I am using a field called item status for approving and disapproving the records. My validation is based on this field only... Validation working fine when i tested it manually.
But my issue is when am using this validate step in workflow design validation is getting triggered for all the users.as per my requirement only approver should get the error message.But in my scenario owner is getting the error message and approver is not getting any message.
How can i use the validate step only for particular step say approve in workflow.
Can anyone please help me out how should use validate step only for approve step...
Thanks & Regards
Sireesha.
Edited by: sireesha esukapalli on Jun 17, 2008 2:48 PM

Hi ,
I have set the validation property to "None".
My design is as follows :
start->process->validate->approve->stop.
Owner is assigned to process step and approver is assigned to approve step.
Now my problem is owner is also getting this error message along with the approver. AS per the design both process, approve users are getting the error message.
As per my requirement only approver should get this prompt but not the owner.
How can i restrict only for specifc user to get this message.
Can anybody please advice how can restrict the owner to not get this error message...
Thanks & Regards
Sireesha.
Edited by: sireesha esukapalli on Jun 24, 2008 2:18 PM

How should i update

Hello
One of the columns in my table data is contained with apostrophy.
For eg Equipment's.
Now i want to remove apostrophy and keep the data as it is as it is creating some problems How should i update that.
For example Equipment's should be replaced with Equipment.
Every record in that column need not contain apostrophy. It may contain or may not contain
Please help me.
With Regards

Do you always want to remove 's or are there some rows that have different uses of the apostrophe. Such as
Don't
Good 'n' Plenty
The Peoples' Court

How should get last month value from report?

Hi experts,
How should last month value. For example
jan    feb    march
100   --       ---
Here i want to get jan month value in march coloumn.

Hi ,
It is only show last month value. but my requirement is if last month is empty it should bring Before Last month.
For Example
Jan       Feb       Mar
1000
i need if the Feb value is empty should come jan month value.

How should I do JavaCard Applet for ROM masking?

Similar Messages

Maybe you are looking for