How should I install extra Perl modules?

I thinking about using Munin from Linpro (http://munin.projects.linpro.no/) to monitor my OCS-servers that are running on RedHat Advanced Server 2.1 (and soon-to-come RedHat Enterprise latest version), but this program needs a module called perl-Net-Server.
How should I install this? There is a perl-installation under the $ORACLE_HOME, but Munin will run as root. Will I mess up something in OCS if I just install the RPM package Munin recomends? (from the DAG archive http://dag.wieers.com/rpm/packages/perl-Net-Server/ )

Apache/Oracle HTTP Server is on the Companion CD
and is not installed with the DB

Similar Messages

Is i cloud already available in Mexico? if it is, how should i install it in my mac os x version 10.6.8? Does i cloud have a cost?, how much is that?

Is i cloud already available in Mexico? if it is, how should i install it in my mac os x version 10.6.8? Does i cloud have a cost?, how much is that?

Read here > Sign up to be notified when iOS 5 and iCloud are available.

Trouble installing the PERL modules for the ITunesU script

I am trying to install the modules specified in the PERL script. I get an error when trying to install which I think is a result of a problem with the MAC developer tools. This is the output that I get when trying to install the Digest::SHA module
Can someone please tell me how to fix this?
cpan> install Digest::SHA
CPAN: Storable loaded ok
Going to read /Users/admin/.cpan/Metadata
Database was generated on Wed, 21 Mar 2007 01:09:40 GMT
Running install for module Digest::SHA
Running make for M/MS/MSHELOR/Digest-SHA-5.44.tar.gz
CPAN: Digest::MD5 loaded ok
CPAN: Compress::Zlib loaded ok
Checksum for /Users/admin/.cpan/sources/authors/id/M/MS/MSHELOR/Digest-SHA-5.44. tar.gz ok
Scanning cache /Users/admin/.cpan/build for sizes
Digest-SHA-5.44/
Digest-SHA-5.44/t/
Digest-SHA-5.44/t/state/
Digest-SHA-5.44/t/state/state.1
Digest-SHA-5.44/t/state/state.256
Digest-SHA-5.44/t/state/state.512
Digest-SHA-5.44/t/state/state.384
Digest-SHA-5.44/t/4-bitstr-large.t
Digest-SHA-5.44/t/2-nist-vectors-byte.t
Digest-SHA-5.44/t/nist/
Digest-SHA-5.44/t/nist/Readme.txt
Digest-SHA-5.44/t/nist/bit-messages.sha1
Digest-SHA-5.44/t/nist/byte-hashes.sha1
Digest-SHA-5.44/t/nist/byte-messages.sha1
Digest-SHA-5.44/t/nist/COPYRIGHT
Digest-SHA-5.44/t/nist/bit-hashes.sha1
Digest-SHA-5.44/t/1-exist.t
Digest-SHA-5.44/t/5-hmac-rfc2202.t
Digest-SHA-5.44/t/2-nist-sha-base64.t
Digest-SHA-5.44/t/2-nist-sha-1.t
Digest-SHA-5.44/t/4-bitstr-increasing.t
Digest-SHA-5.44/t/2-nist-sha-256.t
Digest-SHA-5.44/t/0-pod.t
Digest-SHA-5.44/t/0-pod-coverage.t
Digest-SHA-5.44/t/7-ireland.t
Digest-SHA-5.44/t/2-nist-sha-224.t
Digest-SHA-5.44/t/2-nist-sha-384.t
Digest-SHA-5.44/t/3-gillogly-easy.t
Digest-SHA-5.44/t/6-dump-load.t
Digest-SHA-5.44/t/2-nist-sha-512.t
Digest-SHA-5.44/t/5-hmac-fips198.t
Digest-SHA-5.44/t/gillogly/
Digest-SHA-5.44/t/gillogly/state.110
Digest-SHA-5.44/t/gillogly/state.011
Digest-SHA-5.44/t/5-hmac-woodbury.t
Digest-SHA-5.44/t/3-gillogly-hard.t
Digest-SHA-5.44/t/5-hmac-sha-256.t
Digest-SHA-5.44/t/2-nist-sha-oo.t
Digest-SHA-5.44/t/2-nist-vectors-bit.t
Digest-SHA-5.44/t/1-hello-world.t
Digest-SHA-5.44/t/4-bitstr-random.t
Digest-SHA-5.44/examples/
Digest-SHA-5.44/examples/dups
Digest-SHA-5.44/Changes
Digest-SHA-5.44/MANIFEST
Digest-SHA-5.44/typemap
Digest-SHA-5.44/src/
Digest-SHA-5.44/src/sha.c
Digest-SHA-5.44/src/sha64bit.c
Digest-SHA-5.44/src/hmacxtra.c
Digest-SHA-5.44/src/sha.h
Digest-SHA-5.44/src/hmac.h
Digest-SHA-5.44/src/shaxtra.c
Digest-SHA-5.44/src/hmac.c
Digest-SHA-5.44/src/sha64bit.h
Digest-SHA-5.44/META.yml
Digest-SHA-5.44/SHA.pm
Digest-SHA-5.44/SHA.xs
Digest-SHA-5.44/shasum
Digest-SHA-5.44/Makefile.PL
Digest-SHA-5.44/README
Removing previously used /Users/admin/.cpan/build/Digest-SHA-5.44
CPAN.pm: Going to build M/MS/MSHELOR/Digest-SHA-5.44.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Digest::SHA
-- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
cpan>
I installed the Developer tools from Apple's web site.
Thanks
Donna

I figured it out. I discovered that the developer tools weren't installed by default on the Darwin OS. I downloaded them from the Apple site, installed the dmg file and then installed the required Perl modules and then it worked beautifully.
The problem was that the modules couldn't make properly when being installed.
Fun Fun
Donna

How do I install Adobe Output module into Bridge CC?

How do I successfully install Adobe Output module into Bridge CC?

Is this what you are looking for?
Install Adobe Output Module

How should I install GRUB to dual-boot 2 distros on two diff hd drves?

Well, I actually have two questions. I'm using the FTP install CD and noticed I don't have the Install Kernel Option after Configure System. Does this mean that the kernel was installed when I did Configure System automatically? Or that it wants me to run make && make modules_install manually? I couldn't quite figure that one out.
Now as for my main question... I pretty much got through the install okay but am a bit paranoid about just saying Install Bootloader. I currently have Gentoo on another hard drive on my computer and don't want to wipe out GRUB on Gentoo.
If this helps, this is my partition scheme:
/dev/hda1 swap (for both Gentoo and Arch)
/dev/hda2 / for Gentoo
/dev/hdb1 /usr/portage for Gentoo
/dev/hdb2 / for arch
So how should I go about installing the boot loader? And I am assuming I would have to appropriately edit the lines of my grub.conf in Gentoo.... this is it currently...
title=Gentoo Linux 2.6.23-r3
# Partition where the kernel image (or operating system) is located
root (hd0,1)
kernel /boot/kernel-2.6.23-gentoo-r3 root=/dev/hda2
title=Gentoo Linux 2.6.23-r3 (rescue)
# Partition where the kernel image (or operating system) is located
root (hd0,1)
kernel /boot/kernel-2.6.23-gentoo-r3 root=/dev/hda2 init=/bin/bb
So would I just add
title=Arch Linux
root (hd1,1)
kernel /boot/vmlinuz26 root=/dev/hdb2 initrd /boot/kernel26.img
to my Gentoo's grub.conf? Or am I just completely off here? Then in addition to that what else would I have to do to get it to dual boot without overwriting my Gentoo's GRUB? I'm just afraid I'll mess it up.
PS: In Arch, all my hard drives are showing up as /dev/sda1, etc., not hda1, if that makes a difference. :-p I was like SCSI? *blinks* XDDDDD But that's normal, right? But I figured since it's Gentoo's GRUB I should use hd*
So woud I just choose to install GRUB for Arch on /dev/sdb2 then, the partition that it's on, since I'm planning on using Gentoo's bootloader, and then just edit gentoo's grub.conf file?
Last edited by violagirl23 (2008-01-30 04:12:20)

tesjo wrote:
Basically right but you should add
title= Arch Linux
root (hd1,1)
kernel /boot/vmlinuz26 root=/dev/hdb2 ro
initrd /boot/kernel26.img
Arch uses a newer library I forget the name, which identifies drives as sdX instead of hdX
Well, I got it working. Thanks! Turns out this is what I needed:
root (hd1,1)
kernel /boot/vmlinuz26 root=/dev/sdb2 ro
initrd /boot/kernel26.img
I tried (sd1,1) and root=/dev/sdb2 at first but it barked at me for the (sd1,1), so I changed it back, and with root=/dev/sdb2 all seems to be well. Thanks!

Problem installing css perl module

Hey,
my problem isn't probably arch-related (and possibly very dumb), but I hope someone can help me anyway.
I'm trying to install a CSS perl module - and here is what I get -
[root@vlsi-wiki ~]# perl -MCPAN -eshell
Terminal does not support AddHistory.
cpan shell -- CPAN exploration and modules installation (v1.9456)
Enter 'h' for help.
cpan[1]> install CSS
Going to read '/root/.cpan/Metadata'
Database was generated on Mon, 24 May 2010 09:27:04 GMT
Fetching with LWP:
ftp://cpan.noris.de/pub/CPAN/authors/01mailrc.txt.gz
Going to read '/root/.cpan/sources/authors/01mailrc.txt.gz'
............................................................................DONE
Fetching with LWP:
ftp://cpan.noris.de/pub/CPAN/modules/02packages.details.txt.gz
Going to read '/root/.cpan/sources/modules/02packages.details.txt.gz'
Database was generated on Tue, 25 May 2010 09:27:47 GMT
............................................................................DONE
Fetching with LWP:
ftp://cpan.noris.de/pub/CPAN/modules/03modlist.data.gz
Going to read '/root/.cpan/sources/modules/03modlist.data.gz'
............................................................................DONE
Going to write /root/.cpan/Metadata
Running install for module 'CSS'
Running make for I/IA/IAMCAL/CSS-1.08.tar.gz
Checksum for /root/.cpan/sources/authors/id/I/IA/IAMCAL/CSS-1.08.tar.gz ok
Scanning cache /root/.cpan/build for sizes
............................................................................DONE
CPAN.pm: Going to build I/IA/IAMCAL/CSS-1.08.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for CSS
cp CSS.pm blib/lib/CSS.pm
cp CSS/Value.pm blib/lib/CSS/Value.pm
cp CSS/Parse/Compiled.pm blib/lib/CSS/Parse/Compiled.pm
cp CSS/Property.pm blib/lib/CSS/Property.pm
cp CSS/Style.pm blib/lib/CSS/Style.pm
cp CSS/Parse/PRDGrammar.pm blib/lib/CSS/Parse/PRDGrammar.pm
cp CSS/Parse/Heavy.pm blib/lib/CSS/Parse/Heavy.pm
cp CSS/Selector.pm blib/lib/CSS/Selector.pm
cp CSS/Parse/Lite.pm blib/lib/CSS/Parse/Lite.pm
cp CSS/Adaptor/Debug.pm blib/lib/CSS/Adaptor/Debug.pm
cp CSS/Adaptor/Pretty.pm blib/lib/CSS/Adaptor/Pretty.pm
cp CSS/Parse.pm blib/lib/CSS/Parse.pm
cp CSS/Adaptor.pm blib/lib/CSS/Adaptor.pm
cp CSS/Parse/CompiledGrammar.pm blib/lib/CSS/Parse/CompiledGrammar.pm
Manifying blib/man3/CSS.3pm
Manifying blib/man3/CSS::Value.3pm
Manifying blib/man3/CSS::Parse::Compiled.3pm
Manifying blib/man3/CSS::Property.3pm
Manifying blib/man3/CSS::Parse::Heavy.3pm
Manifying blib/man3/CSS::Parse::PRDGrammar.3pm
Manifying blib/man3/CSS::Style.3pm
Manifying blib/man3/CSS::Parse::Lite.3pm
Manifying blib/man3/CSS::Selector.3pm
Manifying blib/man3/CSS::Adaptor::Debug.3pm
Manifying blib/man3/CSS::Parse.3pm
Manifying blib/man3/CSS::Adaptor::Pretty.3pm
Manifying blib/man3/CSS::Adaptor.3pm
IAMCAL/CSS-1.08.tar.gz
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_basic.t ........... ok
t/02_parse_lite.t ...... ok
t/03_parse_heavy.t ..... ok
t/04_parse_compiled.t .. 1/8 Unknown starting rule (Parse::RecDescent::namespace000001::stylesheet) called
at /root/.cpan/build/CSS-1.08-pVKcD1/blib/lib/CSS/Parse/Compiled.pm line 28
Compilation failed in require at t/04_parse_compiled.t line 3.
# Looks like you planned 8 tests but ran 4.
# Looks like your test exited with 255 just after 4.
t/04_parse_compiled.t .. Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/8 subtests
t/05_search.t .......... ok
t/06_adaptor_simple.t .. ok
t/07_adaptor_pretty.t .. ok
t/08_adaptor_debug.t ... ok
Test Summary Report
t/04_parse_compiled.t (Wstat: 65280 Tests: 4 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 8 tests but ran 4.
Files=8, Tests=38, 2 wallclock secs ( 0.05 usr 0.06 sys + 1.15 cusr 0.19 csys = 1.45 CPU)
Result: FAIL
Failed 1/8 test programs. 0/38 subtests failed.
make: *** [test_dynamic] Error 255
IAMCAL/CSS-1.08.tar.gz
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports IAMCAL/CSS-1.08.tar.gz
Running make install
make test had returned bad status, won't install without force
Failed during this command:
IAMCAL/CSS-1.08.tar.gz : make_test NO
I've tried with both perl 5.10.1 and perl from testing (5.12), didn't help.
Does anyone have any idea?

There is a bug upstream according to CPAN's bugtracker. Someone provided a fix there to regenerate the buggy file that is causing the test to fail. Here is a source package file I made. You can build it to apply their fix and make the package.

How should I install/setup a single OS of windows 7 to run through bootcamp and parallels 7 on my new macbook pro?

I just bought a new macbook 8g ram and 750g harddrive and want to be able to run windows 7 through bootcamp and parallels. How do I setup that up and install a single version of windows (want to be able to utilize heavy programs - photoshop, 3D modeling CAD etc. - by installing them once and being able to use them through parallels 7 or bootcamp)? Please let me know of anything that may red flag by doing this and clear concise instructions of which to do first/ settings for bootcamp and parallels

BootCamp is directly booting your computer into Windows for full hardware access and performance, just like a PC. It's free from Apple.
https://www.apple.com/support/bootcamp/
Virtual machine software (paid) like Parallels and VMFusion both can take the Bootcamped Windows and make a copy for use in OS X in a window at the same time as using OS X, but less performance. It's usualyl easiler to use.
A free virtual machine option is VirtualBox, but it might not have all the bells and whistles of the payware options above, but works just fine.
We can't provide detailed installation instructions, it's too much, you will have to read Apple's instructions and the manual for your virtual machine software.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

How Should I Install iPhoto 4.0?

Hi,
I use Mac G4; run Mac OS X 10.4.11 - TIGER; have iPhoto 1.1.1. I just downloaded a free copy of iPhoto 4.0. Is iPhoto 4.0 a standalone application? Do I need to download upgrades to iPhoto 1.1.1 before I install iPhoto 4.0?
Angel

Thank you Niel for your prompt response to my issue.
I did not download iPhoto 1.1.1 from Apple, I already had it on a second hard disk and copied it to my main hard drive a few days ago. I did not use it before because I didn't have a digital camera until now. I don't have iLife on any of my hard disks.
I did download a free copy of iPhoto 4.0 just days after I installed iPhoto 1.1.1 on my main hard disk, and I don't
know if I need any other updates to to bring me up to speed before installing iPhoto 4.0. Should I just install iPhoto 4.0 and by doing so will it give me a standalone iPhoto 4.0 application?
Sincerely,
Angel

How can I create icloud account which I tried and it has showing the message that multiple free accounts have been activated on this device how should I install icloud and I got from apple support if you have mac then create a new icloud account but I don

How will have an option to create an icloud id

Hello there, vishal274.
The following Knowledge Base article provides a great FAQ that provides some great answers to some of the more common questions about iCloud, including yours:
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/ht4436
How do I sign up for iCloud?
You can sign up for iCloud on an iPhone, iPad, or iPod touch with iOS 5 or later, or through System Preferences on a Mac with OS X Lion v10.7.4 or later. Just follow the setup instructions for your iOS device or Mac.
You may need to verify the email address that you use for your Apple ID. See Frequently Asked Questions About Apple ID for more information.
I had a free Find My iPhone account. How do I sign up for iCloud?
Update the devices that you use with Find My iPhone to iOS 5 (iOS 6 recommended). When you're asked to enter an Apple ID during setup, enter the Apple ID you were using for Free Find My iPhone. Your account will be automatically updated to iCloud.
I had a MobileMe account. How do I sign up for iCloud?
To use your MobileMe account for iCloud, follow the iCloud setup instructions and enter your @me.com or @mac.com email address as your Apple ID. If you had an @me.com address, it will be reactivated for email when you sign up for iCloud. If you had an @mac.com address, it won't be reactivated for email, but you can set up a new @icloud.com email address to use with iCloud.
Important: You will need a verified email address associated with your @me.com or @mac.com Apple ID to set up iCloud. To add a verified email address, go to My Apple ID (appleid.apple.com), sign in with your @me.com or @mac.com email address, and add a valid email address to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Perl module not working/installed properly

I have a perl script that worked fine on Ubuntu. I've now replaced Ubuntu with Arch and installed the perl modules I need to run this script and one of them doesn't seem to be working properly, I think I had a hiccup during installation of this particular module. Can someone point me in the right direction as to how to fix this please.
This is the output of my script falling over:
[me@arch ~]$ perl -e 'use MP4::Info;'
Can't locate IO/String.pm in @INC (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/share/perl5/site_perl/MP4/Info.pm line 16.
BEGIN failed--compilation aborted at /usr/share/perl5/site_perl/MP4/Info.pm line 16.
Compilation failed in require at -e line 1.
BEGIN failed--compilation aborted at -e line 1.
The 'MP4::Info' module "appears" to be installed ok though, as shown thusly:
[me@arch ~]$ cpan
Terminal does not support AddHistory.
cpan shell -- CPAN exploration and modules installation (v1.9600)
Enter 'h' for help.
cpan[1]> install MP4:Info
Going to read '/home/wayne/.cpan/Metadata'
Database was generated on Fri, 23 Sep 2011 01:50:05 GMT
MP4::Info is up to date (1.13).
cpan[2]>
Any help greatly appreciated, thanks in advance.

For some reason IO::String was not installed. Try installing it from the cpan shell.

Can't install perl modul DBD::Oracle with XE

Hello,
I have installed oracle 10.2.0.1 XE and want now install the perl modul DBD::Oracle.
After running
perl Makefile.PL
I get the message:
Unable to locate an oracle.mk, proc.mk or other suitable *.mkfile in your Oracle installation. (I looked in
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/rdbms/lib/oracle.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/rdbms/demo/oracle.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/rdbms/demo/demo_rdbms.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/otrace/demo/atmoci.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/precomp/demo/proc/proc.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/precomp/demo/proc/demo_proc.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/proc/lib/proc.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/proc16/lib/proc16.mk)
And the program is right!!
I do not have any of this files on my Computer.
I also looked in the files
oracle-instantclient-basic-10.2.0.1-1.i386.rpm
oracle-instantclient-devel-10.2.0.1-1.i386.rpm
where I also can't find these files.
Could you please help and tell me, where I can get these files?
Thank you,
Marc

See the thread on Perl with XE in Re: How can I get CPAN DBD::Oracle to install with XE?
-- cj

Fail installing perl modules in new sparc server

Hi,
I'm trying to install the perl modules needed by my applications in a sparc server SunFire V210 with solaris 9 64bit. All the attempts fail because the interpreter is compiled with forte, this is the explanation i got. I found a solution in CPAN called perlgcc but it doesn't work it build a bad Makefile, the file has a lot of mistakes. Perl.com people tell me to change parameters in the makefiles and Config.pm but it's very hard to find the correct values, i'm not sure i fix the correct things.still it doesn't work.
I need an urgent solution it permits me to add modules without correction in the each makefile. I hope there is a standar procedure to solve it.
Thanks!

Hi,
Here is your solution (I hope). I've being doing this this week and worked.
Look the stuff is connected with the compilers used to complie perl and as you see later other stuff on the sun. At the sun the stuff is compiled with sun compiler which is not provided on the solaris 8, 9 nor 10. Fortunately there is gcc installed on the sol10.
-bash-3.00# gcc --version<br />
gcc (GCC) 3.4.3 (csl-sol210-3_4-branch+sol_rpath)
Copyright (C) 2004 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-bash-3.00#
The perl is compiled with sun compiler cc
-bash-3.00# perl -V | more
More
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
More
Platform:
osname=solaris, osvers=2.10, archname=sun4-solaris-64int
uname='sunos localhost 5.10 sun4u sparc SUNW,Ultra-2'
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=unde
f
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_T
S_ERRNO',
optimize='-xO3 -xspace -xildoff',
cppflags=''
ccversion='Sun WorkShop', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lsee
ksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =''
libpth=/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-R /usr/perl5/5.8.
4/lib/sun4-solaris-64int/CORE'
cccdlflags='-KPIC', lddlflags='-G'
What to do??? Yes - you are on sol10 - then do it
1. Logon as a root
2. Check your path and compare with
-bash-3.00# echo $PATH
/usr/sbin:/usr/bin:/usr/sfw:/usr/sfw/bin:/usr/sfw/lib:/usr/s fw/include:/opt/sfw:
/opt/sfw/bin:/opt/sfw/lib:/opt/sfw/include:/usr/ccs/bin:/usr /ccs/lib
-bash-3.00#
if differs upto the last /usr/ccs/lib modify your profile file ( anthing ofter the last /usr/ccs/lib can be aded).
3. Check out the the comands
gcc --version<br />
perl -V
4. If everything upto this step is ok you can proceed
5. You may do the installation of the perl modules in two ways:
a.) with CPAN module - Internet connection MANDATORY
b.) with perl and downloaded tar.gz module
5.a) With CPAN module
5.a.1) Launch the command to configure the CPAN module
perl -MCPAN -e shell
you will be asked to give the answers inorder to configure CPAN
5.a.2) When you see cpan> prompt do the following:
o conf makepl_arg 'CC=gcc CCCDLFLAGS=-fPIC CCFLAGS=" " OPTIMIZE=" " LD=gcc' press return
5.a.3) Type "o conf commit" press return. You may install your modules now with the install command e.g. install HTML::Parser for example.
5.b.1) Download your modules from http://www.cpan.org to your server to /var/tmp/packed or whatever folder you want.
5.b.2) unzip then untar and cd into subfolder
5.b.3) type ./Makefile.PL -t 'CC=gcc CCCDLFLAGS=-fPIC CCFLAGS=" " OPTIMIZE=" " LD=gcc'
5.b.4) Type make install
6.) In both methods you have to check if the modules are installed by issuing the commnad:
perl -e 'use Your::Module' e.g.
perl -e 'use HTTP::Parser'
if no error message on the term you are ready
Rem. The differrences are in the flags used to compile and link with these two compilers sun cc and gnu cc. There are of course problems with 64bit values on sun64bit e.g. SPARC and Intel stuff cause Perl does not support real 64bit values yet. The Perl modules should use only floating point represetnation with around 53~bit precision. But this issue depends on the module creator not you if you do not want to do the remedy.
I hope it will help you
good luck

Cannot install perl modules

Hi team,
I’m trying to do a little perl script to telnet some cisco equipment.
I’m trying to install some perl module through CPAN but I was got an error. Output is the following. Any ideas?
Using MAC OSX 10.6.4
cpan[13]> install Net::Telnet:Cisco
Running install for module 'Net::Telnet::Cisco'
CPAN: Data::Dumper loaded ok (v2.121_14)
'YAML' not installed, falling back to Data::Dumper and Storable to read prefs '/Users/sepinto/.cpan/prefs'
Running make for J/JO/JOSHUA/Net-Telnet-Cisco-1.10.tar.gz
Checksum for /Users/sepinto/.cpan/sources/authors/id/J/JO/JOSHUA/Net-Telnet-Cisco-1.10.tar.g z ok
x Net-Telnet-Cisco-1.10/
x Net-Telnet-Cisco-1.10/README
x Net-Telnet-Cisco-1.10/Cisco.pm
x Net-Telnet-Cisco-1.10/.cvsignore
x Net-Telnet-Cisco-1.10/MANIFEST
x Net-Telnet-Cisco-1.10/test.pl
x Net-Telnet-Cisco-1.10/MANIFEST.SKIP
x Net-Telnet-Cisco-1.10/Changes
x Net-Telnet-Cisco-1.10/INSTALL
x Net-Telnet-Cisco-1.10/Makefile.PL
x Net-Telnet-Cisco-1.10/TODO
Warning (usually harmless): 'YAML' not installed, will not store persistent state
CPAN.pm: Going to build J/JO/JOSHUA/Net-Telnet-Cisco-1.10.tar.gz
Checking if your kit is complete...
Looks good
Warning: prerequisite Net::Telnet 3.02 not found.
Writing Makefile for Net::Telnet::Cisco
---- Unsatisfied dependencies detected during ----
---- JOSHUA/Net-Telnet-Cisco-1.10.tar.gz ----
Net::Telnet [requires]
Shall I follow them and prepend them to the queue
of modules we are processing right now? [yes]
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Running install for module 'Net::Telnet'
'YAML' not installed, falling back to Data::Dumper and Storable to read prefs '/Users/sepinto/.cpan/prefs'
Running make for J/JR/JROGERS/Net-Telnet-3.03.tar.gz
Has already been unwrapped into directory /Users/sepinto/.cpan/build/Net-Telnet-3.03-naYMND
Could not make: Unknown error
Warning (usually harmless): 'YAML' not installed, will not store persistent state
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Running make for J/JO/JOSHUA/Net-Telnet-Cisco-1.10.tar.gz
Has already been unwrapped into directory /Users/sepinto/.cpan/build/Net-Telnet-Cisco-1.10-jrURaI
CPAN.pm: Going to build J/JO/JOSHUA/Net-Telnet-Cisco-1.10.tar.gz
Warning: Prerequisite 'Net::Telnet => 3.02' for 'J/JO/JOSHUA/Net-Telnet-Cisco-1.10.tar.gz' failed when processing 'J/JR/JROGERS/Net-Telnet-3.03.tar.gz' with 'make => NO'. Continuing, but chances to succeed are limited.
Can't exec "make": No such file or directory at /System/Library/Perl/5.10.0/CPAN.pm line 7698.
JOSHUA/Net-Telnet-Cisco-1.10.tar.gz
make -- NOT OK
Warning (usually harmless): 'YAML' not installed, will not store persistent state
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Failed during this command:
JOSHUA/Net-Telnet-Cisco-1.10.tar.gz : make NO
Thanks for your help.
Regards
SP

Hi Robert,
Unfortunately, I already tried that. Here are the results:
sepinto-mac:~ sepinto$ sudo perl -MCPAN -e shell
Password:
Terminal does not support AddHistory.
cpan shell -- CPAN exploration and modules installation (v1.9205)
ReadLine support available (maybe install Bundle::CPAN or Bundle::CPANxxl?)
cpan[1]> install Net::Telnet
CPAN: Storable loaded ok (v2.18)
Going to read /Users/sepinto/.cpan/Metadata
Database was generated on Mon, 16 Aug 2010 10:36:17 GMT
Running install for module 'Net::Telnet'
CPAN: Data::Dumper loaded ok (v2.121_14)
'YAML' not installed, falling back to Data::Dumper and Storable to read prefs '/Users/sepinto/.cpan/prefs'
Running make for J/JR/JROGERS/Net-Telnet-3.03.tar.gz
CPAN: Digest::SHA loaded ok (v5.45)
CPAN: Compress::Zlib loaded ok (v2.008)
Checksum for /Users/sepinto/.cpan/sources/authors/id/J/JR/JROGERS/Net-Telnet-3.03.tar.gz ok
Scanning cache /Users/sepinto/.cpan/build for sizes
............................................................................DONE
x Net-Telnet-3.03/
x Net-Telnet-3.03/Makefile.PL
x Net-Telnet-3.03/ChangeLog
x Net-Telnet-3.03/lib/
x Net-Telnet-3.03/lib/Net/
x Net-Telnet-3.03/lib/Net/Telnet.pm
x Net-Telnet-3.03/t/
x Net-Telnet-3.03/t/select.t
x Net-Telnet-3.03/README
x Net-Telnet-3.03/MANIFEST
CPAN: File::Temp loaded ok (v0.18)
Warning (usually harmless): 'YAML' not installed, will not store persistent state
CPAN.pm: Going to build J/JR/JROGERS/Net-Telnet-3.03.tar.gz
Checking if your kit is complete...
Looks good
Writing Makefile for Net::Telnet
Can't exec "make": No such file or directory at /System/Library/Perl/5.10.0/CPAN.pm line 7698.
JROGERS/Net-Telnet-3.03.tar.gz
make -- NOT OK
Warning (usually harmless): 'YAML' not installed, will not store persistent state
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Failed during this command:
JROGERS/Net-Telnet-3.03.tar.gz : make NO

Location of perl module?

howdy guys,
I'm installing insipid (a delicious clone) on my local webserver to try.
It's pretty straight forward, but needs a bunch of "extra" perl modules, most of which I used pacman to fetch. Except at least one. I get this error:
insipid wrote:Couldn't find the module "XML/Writer.pm"
what package contains Writer.pm?

scrawler wrote:thanks. Still, if Writer.pm is already in an arch package, I would prefer to install it that way.
This seems to be a bit late for you, but it's in the AUR here.
Re the general topic of perl modules, I prefer to install everything I can with pacman, and with perl I've succeeded so far, either from the official repos, the AUR, or my own PKGBUILDs. If I ever find myself needing 100s of the things, though, I might have to go with the cpan stuff.

I would like to be able to optimize my cc installation. I am using a ssd card as my primary hard drive on a windows 8.1 machine with 32 gigs of memory. I have additional spinner hard drives in this machine. Everything is SATA 2 or 3. How should I inst

I would like to be able to optimize my cc installation. I am using a 500 GB ssd card as my primary hard drive on a windows 8.1 machine with 32 gigs of memory. I have additional spinner hard drives in this machine. Everything is SATA 2 or 3. How should I install the product to best utilize my hardware assets (Program Installation Drive; Scratch Drive; Temporary storage drive etc.).

Barcode1 I would recommend you install the Adobe Creative applications included with your membership to your Primary hard drive which contains your operating system. For questions on how to optimize specific settings such as scratch disks I would recommend posting in the relevant point product forum. You can find a list of available forums at https://forums.adobe.com/welcome.

How should I install extra Perl modules?

Similar Messages

Maybe you are looking for