How should i know that i have or already installed these in my database?

my question regarding the steps in Post Installation Actions in installing patchset Oracle 9i Data Server 9.0.1 Patch Set 4 for Sun SPARC Solaris (32 bit Database)
I'm not very sure about the instruction..
How should i know that i have or already installed these in my database?
Should i run all even if i don't know whether i use them or not?
Or should i do nothing, and continue to my next patch installation?
-Execute the following step only if you have JAVA enabled in your database:
-Execute the following steps only if you have installed the Oracle Label
Security option in the database you are attempting to modify:
-Execute the following steps only if you have JAVA enabled in your database:
-Execute the following steps only if you have installed UltraSearch in the
database you are attempting to modify:
-Execute the following steps only if you have installed Oracle Spatial or
Oracle Locator in the database you are attempting to modify:
-Execute the following steps only is you are using the RMAN catalog.:
Plz advise..
Regards,
Rushdan Md Saad.

It all depends. You don't NEED anything, Firefox runs just fine with it's default setup, and you don't need to install anything to fully experience the best of the web. But lets say you don't like ads. Install Adblock plus. Lets say you want to change themes, there are dozens of them. It's all personal preference.

Similar Messages

I descarguei these new versions adobe creative Cloud, y uninstalled for removing the trash, why did not interest me, then appearing me sigue to update something that I have not already installed, how do I solve this problem?

I descarguei these new versions adobe creative Cloud, y uninstalled for removing the trash, why did not interest me, then appearing me sigue to update something that I have not already installed, how do I solve this problem?

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

How would i know that i have bought a genuine product of sony?

incase i tried to buy from third party store like ebay how would i know that its a genuine sony product?

Get the Previous interval value that is 1 day minus of current interval starting day.
and get value from the table
E.G you have current value like this.
current value
start date : '01.02.2006'
end date " '31.12.9999'
Previous value
start date : '01.11.2005'
end date " '31.12.2006'
Regards,
Wasim Ahmed

Why does Firefox not acknowledge that I have Silverlight already installed. When trying to work with "Getting Started" in Windows 7, it keeps telling me I have to download Silverlight to view this information.

I recently purchased a new computer with Windows 7 OS. When trying to learn the transition experience from Windows XP to this new OS version, I was presented with this problem of going around in circles.
When trying to view "Discover Windows 7" via "Start>Getting Started>Discover Windows 7", a Microsoft website opens to; (http://windows.microsoft.com/en-US/windows7/help/videos/personalizing-your-pc). It tells me; To view this contents, please install Microsoft Silverlight. Once I install it and get back to this page, I get the same message. I can not view any of the help content before installing Microsoft Silverlight. So now it is a never ending "CIRCLE of LIGHT"! Is this a problem with my Firefox or with Windows Microsoft 7?

I'm not seeing the Silverlight plugin in your More system details list, so Firefox doesn't find it if you have it.
I assume that you also do not see it in Tools > Add-ons > Plugins ?

How do i know if an add on was installed ok

I am increcidibly lame when it comes to computer talk. I just installed Firefox and installed the add-on Addblock plus. How do I know that the add on was installed? Is there somewhere that I need to enable the add on also?

You appear to be using an outdated unsupported version of firefox. (From looking at the system details aside). You possibly will be unable to update from Firefox 5 to Firefox 7 using the Help menu.
Download the latest version from an official website such as:
* http://www.mozilla.org/en-US/products/download.html
* take CARE '''not''' to use any options saying something along the lines of'' remove personal settings'', because that is likely to remove profiles from all normally installed versions of Firefox, and you will loose data such as settings, passwords and bookmarks.
* see also
** [[Installing Firefox on Windows]]
**[http://www.mozilla.org/en-US/firefox/phishing-protection/]

My computer was stolen. How do I find it if I dont know that I have icloud?

My computer was stolen. How do I find it if I dont know that I have icloud?

To find your mac using Cloud, you previously must have enabled "Find my Mac" in iCloud for your stolen computer, and your mac must be connected to a Wi-Fi network; only then you should be able to determine its location by visiting icloud.com in your web browser.
Report your mac as stolen to the local authorities.

I want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged

i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged
pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
and i wnat to complete hardware exam of mac what should i do
thanks
vicckey

GSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
If you are interested in becoming a certified Apple hardware technician, you can find information here:
http://training.apple.com/certification/acmt
Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
I have no idea what "knowlaged" might be.
Regards.

I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections

I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections

You should be able to just place them in your Books library in iTunes and check to ensure that your Book library is configured to sync to your iPod when you sync your iPod to iTunes.

TS3988 I got my iPad from my friend and he done a full restore before I got it, but know that I have put my iCloud account on here I have contacts and his too. How can I fix this problem? !!!!!

I got my iPad from my friend and he done a full restore before I got it, but know that I have put my iCloud account on here I have contacts and his too. How can I fix this problem? !!!!!

As I said in the other thread that you posted in the other forum, your friend clearly has not restored the iPad correctly. I suggest that you undertake another restore and start again.

I got my iPad from my friend and he done a full restore before I got it, but know that I have put my iCloud account on here I have contacts and his too. How can I fix this problem? !!!!!

I got my iPad from my friend and he done a full restore before I got it, but know that I have put my iCloud account on here I have contacts and his too. How can I fix this problem? !!!!!

Welcome to the Apple community.
Given what you've have described, your friend cannot have restored the iPad correctly. You need to decide whether you are willing to delete his contacts manually, or carry out another restore. Personally I think I would go for the restore.

How do you change the drive that my Iphone backs-up to on my computer? My first attempt to back-up and i received a pop-up stating that I do not have sufficient memory/space, knowing that I have over 120GB of free space...any ideas? thanks

How do you change the drive that my Iphone backs-up to on my computer? My first attempt to back-up and i received a pop-up stating that I do not have sufficient memory/space, knowing that I have over 120GB of free space...any ideas? thanks

dave0915,
iTunes stores your iPhone backups in the Library folder in your Home folder.
iTunes places the backup files in these places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Create and delete iPhone, iPad, and iPod touch backups in iTunes
http://support.apple.com/en-us/HT4946
Regards,
Allen

I have lots of passwords and found a password app KEEPER how do i know that is really secure?

i have lots of passwords and found a password app KEEPER how do i know that is really secure?
or can someone suggest a better one?
or a better way to track dozens of pass words
thanks in advance
jerry

http://itunes.apple.com/us/app/wallet-pro-password-manager/id284950097?mt=8

How do we know that some of the jobs have been held up in the BW system.And

How do we know that some of the jobs have been held up in the BW system.And after we know that some of the jobs have been held up, how do we restart it?Please provide me an answer.It is very important.I will assign points
Regards,
Poonam

Hi,
Tcode sm37 is the place where you can see the background job status.
Jobs have been help up
as per my understanding
1) job has been triggered and kept it in hold
Now when a job has been triggered, and is kept in hold for its associated process, then you have to wait, becuse the target on which the job has been run is currently used by other and because of this the present job is kept in hold.
Also see the st22 for any shortdumps.
2) Job itself has not yet triggered
The jobs will be in released state and will not trigger, normally this occurs when that particular job is waiting for the event to trigger it, and probably the even has not yet triggered or even if triggered the communication mightnot have been made to the job to trigger. These situations can be attributed to many things lyk system performance, or some internal comm failure, some DB dead locks etc.,.
Now for the first one, start the job immediately with high priority ( if required ) and once completed reschedule it again as normally it is running
for the second , you can trigger the particular event in sm64 and c has the job came to active state or not.
or else you can copy the job and schedule is immediately.
Hope this helps
Janardhan Kumar

Hey i have a 4s my friend send me this from Canada now i want to know that is the contract of this iphone is expires or not ?? So i can factory unlock it how i can know that ???

Hey i have a 4s my friend send me this from Canada now i want to know that is the contract of this iphone is expires or not ?? So i can factory unlock it how i can know that ???

Check under general app-general-about then look under carrier and see what network it has set on it because some networks I know unlock their phones but to my knowledge iPhones the majority bought through carriers are usually locked.

I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?

I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?

Updated printer drivers.
http://support.apple.com/kb/DL899

How should i know that i have or already installed these in my database?

Similar Messages

Maybe you are looking for