How should I partition 10 gig HD for Mail Server???

I plan on making a mail server but I am not sure what partitions to use. I have a 10 gig HD, and I dont want to partition it wrong then have no idea how to go back and redo the partitions without reinstalling. I was thinking something like:
/ = 2gig
swap = 512mb
/opt = 3gig
/export/home = 4 gig
Any idea what steps I should take first to creating a mail server? I still can't find the pop and imap server packages.

For POP3, I suggest qpopper from Eudora. www.eudora.com/qpopper.
It virtually installed itself and seems to work fine right from the start. Now if I could only figure out how to get Sendmail to work with SMTP. All my Internet mail gets refused by Sendmail, incoming and outgoing.

Similar Messages

Hello. I began with the DPS. Is it possible to publish a magazine for a limited, specific target group? For example, in one department of a large company? Or to the responsible for various services? If so, how should I do? Thank you for your help.

Hello.
I began with the DPS. Is it possible to publish a magazine for a limited, specific target group? For example, in one department of a large company?
Or to the responsible for various services? If so, how should I do? Thank you for your help.

Short answer is yes.
Click the request for consultation link in Digital Publishing Suite Help | DPS pricing options to receive a price estimate for the DPS license your project.

How should i get the delta data for those new object's previous delta data?

Hallo all,
i have 2lis_11_vahdr and i am using a standard and loading delta! now i have appended some new fields in the datasource then in infosource then in ods and infocube..! now how should i get the delta data for those new object's previous delta data???
Jimmy

Hi,
After appending new fields in the datasoure.It is not possible to delta load, u should have to load everything
Thanks,
Shreya

How do we populate the SIGN_POST table for routing server

Hi,
How do we populate the SIGN_POST table for routing server? We having the Street data network... we have populated the NODE, EDGE and PARTITION tables from street data. Is there any procedure available for populating the SIGN_POST table from street data? ARE there any predefined methods available?
Thanks and Regards
Aravindan

This data has to come from the data provider.
There are no procedures to populate this information, if this
data is not available for your data set.
For example, NAVSTREETS from NAVTEQ has this data as part
of their street network data.
siva

How can we define no of processors for a server

How can we define no of processors for a server.on what factor that No of Processors depends? Is it based on
1.Application type,
2.No of transaction perday,
3.No Of users connected simulatneoulsy

You can also add the quality of the application to your list. A poorly writtern application cangobble up resources faster than you can spend.
Also, the size of the database. Bigger size means increased memory, disk, and CPU.

Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How come i know the ip of the mail server at run time

i'm developing a mail distribution server that can be used to send and receive the mails. now i would like to know that how come i know the ip of the host to which i want to send the e-mail. e.g. if the request comes in from the user and contains the address [email protected] or [email protected] then how come i know the ip address of mail server of yahoo or hotmail
pls help
its urgent

dear manish,
i seriously believe that you do not need to know the ip address of the host server of the destination address on the mail.u just need to route your mails through the SMTP server for your organisation where ur going to use this server.
regards,
suraj berwal.

Dns setting require for mail server 2013

Hello Support,
I have install exchange server 2013 and working fine but right now i have some change in DNS server record and my mail services stop. what record add to start my mail services ( sent and received). till now exchange server mail box give the error mail not
connected with server. Please revered ASAP.

couple of things to notice. if you saying your exchange services stopped... this wont happen because of DNS or are you saying you exchange is not working/mail flow.
now i would suggest to quickly check the mail services. run a test for inbound and outbound at exrca.com there you will have the proper answer that what you have missed.
and at last.. for DNS.. you need MX and A record for your email server for basic functioning .. and for autodiscover couple of more. lets verify the MX and A record first and then verify the send and receive connector. to verify MX do a Nslookup as below
>cmd
>nsloookup   {This should resolve to your local DNS if you running this from exchange server, which is recommended and should not time out}
>set type=mx
> your-domain.com {This should result "A" record / FQDN of your mail server}
> set type=A {To verify the above FQDN should point to right IP}
> mail.your-domain.com [assuming that in MX output you got mail-your-domain.com]
> 1.1.1.1 [IP of your email server]
if you are able to verify above then your chances are you dont have issue with DNS.
Make sure from oursite you are able to telnet t tour exchange server on port 25 and from inside you are able to resolve names from your exchange server and also have internet access.if you able to verify till this point then its the turn now to verify send
and receive connector. one easy way is exrca.com and then share the results.
to verify if your exchange is configured properly please follow this link.
http://www.techieshelp.com/exchange-2013-step-by-step-configuration/
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

How should i partition my HD?

i have 250 Giga
i already have a partition for windows (20G)
to make 1 big partition?

/var -> this partition is for the package you download?
pacman stores its package database in /var/lib/pacman and caches the downloaded packages in /var/cache/pacman/pkg. Also the sources for packages built with makepkg are stored by default in /var/cache/pacman/src.
10gb should be more than enough for this. I created an own partition for it because i wanted to use reiser (which makes pacmans db access faster on my machine) and ext3 on every other partition.
/opt - > you said you using it for games, why won`t on /home?
Of course you can store your games in your /home... Its just a matter of preference, and i prefer to have no apps/games in my /home but use /opt for that and chown the games to my user where its required. Planeshift for example has an internal updater, so you need to have the proper rights...
/boot -> for what is it needed?
I never used a boot partition so far so i cant tell you that much about... AFAIK its used when you use a more exotic fs like xfs/jfs that cannot be read by grub for your root partition. The boot partition is usually ext2 for maximum compatibility and gives you the ability to boot from filesystems that are not supported by your boot loader. There may be more advantages, but i dont know them
and what about ext2/4 why not using it?
ext2 has no journaling, so your data is not as safe as compared to ext3... ext4 is in development and unstable, and as far as i know you cant use it with archs installer yet...
As said, its all a matter of preference and how you like it. The minimum i would suggest is a separate /home partition...

How to best partition an external drive for my purposes?

Hello, please help,
I've just bought a Western Digital 'My Passport' 320Gb USB (no firewire) portable external harddrive for backing up my data prior to iMac repair.
I also plan to totally wipe my PPC iMac and reinstall it with Leopard.
I erased the external HD, zeroing out the data from it's previous owner, and reformatted it as Mac OS Extended (not journaled).
Now I realise that it might be even more useful than I'd imagined.
I'd now like to partition it so I can use Carbon Copy Cloner to create a bootable copy of my entire iMac while using the rest of the drive as a separate partition for just backing up data.
Ideally I want to be able to use the drive on both Intel and PPC Macs and even PCs, is this possible? How should I format the drive to achieve this?
I've heard I should format it as Mac OS Extended (Journaled) HFS+, what ever that is
I'm currently running OS 10.4.11 but plan to buy Leopard and install that after the wipe.

17" 1.9Ghz iMac G5 (iSight)
I've just bought a Western Digital 'My Passport' 320Gb USB (no firewire)
I'd now like to partition it so I can use Carbon Copy Cloner to create a bootable copy of my entire iMac while using the rest of the drive as a separate partition for just backing up data.
Ideally I want to be able to use the drive on both Intel and PPC Macs and even PCs, is this possible? How should I format the drive to achieve this?
For what you want to do, there is a mismatch between your PPC computer and the external drive that you bought.
With a few exceptions, a PPC Mac requires a firewire external drive for booting and will not boot from a USB drive, regardless of which OS is installed and regardless of the partition scheme and volume format on the drive. I also have an iMac G5, and mine will not boot from USB.
If you do exchange your drive for a firewire drive, do not get another Western Digital model to use with your G5 - many external WD firewire drives will not boot a PPC mac. See [this page|http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1787]
If you want to keep your present USB drive, you can still partition it with one partition for a backup clone and another for "other stuff". With respect to immediate use for recovering your stuff after a clean Leopard install on the HD, I think that Migration Assistant will still work, though I haven't tried this. As for the future, the problems with a clone not being bootable are 1) You can't test it to see if it works OK, and 2) If you do need to restore from it you'd need to boot from "somewhere else" - I think you could boot from an install disk and use Disk Utility's Restore feature to clone it back.
With regard to PC access, a PPC mac normally requires an Apple Partition Map partition scheme on the drive for booting, and such a scheme does not allow for the FAT32 volume format that is readable by PCs. However in this case since your PPC mac can't boot from it anyway, you could partition the drive as GUID. This would allow the main volume to be formatted as Mac OS Extended (Journaled) for the nonbootable clone, and would allow the extra volume to be formatted as FAT32. If you eventually got an Intel Mac, a clone from it to the main volume would also then be bootable.
But what I would do, if feasible, is exchange the USB drive and get a non-WD firewire drive instead.
Message was edited by: jsd2

How much to partition on External HD for Time Machine?

Hi- I have an 80GB MacBook. I have a new External HD that has 500GB. How much space should I partition so that I can run Time Machine? WIll 100GB do the trick,or should I use more? Thanks for your advice. -Tim

JG!
Whew, am I blushing! I totally missed the FAQ-I just came to the forums and started searching for the answer and just blew by the FAQ. My aplogies. Thanks for directing me that way. I appreciate it.
pat

How to setup the 'Client Licensing Mode' for Windows server?

Hello,
We will install the SBO server:
OS: Windows Server 2003 Standard Edition
SBO Clients: 150
How should we setup the 'Client Licesing Mode' for the windows server?
If we select the mode "Per server,Number of concurrent connections", how to set the connection number?
Thanks in advance.
Don

Hi..
you can set License to Particular user using License under Administration and Client will automatically fetch License using License Manager on License Server
Regards,
Bhavank

How should I add an automated procedure to my server

Hi,
I have Mac OS X Server 10.3.9 running on a eMac.
I wondered how could I add and automated procedure to my server, I explain.
I have a dyn IP provider (no-ip.com) who accepts IP updates via http GET request with a URL like this : http://dynupdate.no-ip.com/dns?username=[email protected]&
password=mytestpassword&hostname=mytest.testdomain.com
Is there a way to get this line executed every 5 minutes with the server ?
Sorry for my bad english but regards to those who are able to answer
eMac Mac OS X (10.3.9) Server

I succeded with the curl method
applaus ;o)
Now I'm working with crontab and I try to understand it
The system crontab is /etc/crontab. Edit it with the command line editor of your choice. If you happen to do not know one, the simpelst one imo is pico.
Try it out with pico testfile.
For the crontab syntax see my first post. You have to add a line like:
0 0 * * * philippe curl "http://..../"
This would start curl once a day at midnight.
Thanks for the help very useful
Points, points, points.... ;o)
-Ralph

How do I set outgoing smtp port for mail program ?

How do I set a port for the outgoing mail server (smtp)? If you go to
SETTINGS \ <email account> \ ADVANCED
you can only associate a port with the INCOMING SETTINGS. I need to associate a port with the Outgoing Server. How do I do this?

Tap on the outgoing smtp server under Settings>Mail,Contacts, Calendars and your email account. You will then see the advanced settings for the outgoing smtp server.

How to install oracle 11gR2 Grid Infrastructure for standalond server

Hi Experts,
we do not want to install ASM. under this condition, does any expert install oracle 11gR2 Grid Infrastructure for standalone server in Linux 5 at file system?
Please share tip and experiences of installed oracle 11gR2 as single instance include install oracle 11gR2 Grid Infrastructure for standalone server in Linux 5. no one node RAC configuration.
If we do not install 11gR2 Grid Infrastructure for standalone server . which function will be lost? restat server only?
Thanks
Jim

Grid Infrastructure automatically uses Oracle Restart as default if you're installing Standalone. You can turn this off using crsctl ('disable has', I believe).
According to the inference in the install docs (http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/oraclerestart.htm#CIHCBGCC), you can install 11gR2 without Grid Infrastructure, but you lose ASM and Restart.

How should I partition 10 gig HD for Mail Server???

Similar Messages

Maybe you are looking for