How should I reload the delta load?

Dear all,
An ODS which includes Sales invoice information with daily delta load. The loading is fine but somehow one KF got different logic from April e.g. for same order this KF has correct value after April but incorrect value before April. So I am going to reload data old than April, but all the old load are fine and existed, so how should I do?
Thanks

Hi,
Thanks for you reply, No date for selection. So I found some data in the ODS for a specific comany code and the bill type(I got 16 recordes), then I created a Infopackage then put the selection same with the company code and bill type, set it to full load and run immediatly, but 0 record was loaded. I am sure the corresponding data exist in R3 because I checked the data using VA03. So what's the problem?
Thanks in advance

Similar Messages

  • How should i get the delta data for those new object's previous delta data?

    Hallo all,
    i have 2lis_11_vahdr and i am using a standard and loading delta! now i have appended some new fields in the datasource then in infosource then in ods and infocube..! now how should i get the delta data for those new object's previous delta data???
    Jimmy

    Hi,
    After appending new fields in the datasoure.It is not possible to delta load, u should have to load everything
    Thanks,
    Shreya

  • How to look at the delta (daily load) records from R/3 system to BW master

    How to look at the delta (daily load) records from R/3 system to BW master on a particular date, let us say,
    today delta happened from R/3 to 0vendor  in BW , how to view what are all the records came to BW - 0vendor (from R/3) in today's delta.
    Regards
    Siva

    Hi,
    youi can see the data in the PSA.
    Just go to the request in monitor tab and in the monitor and in the left top click on the PSA button.
    In the nest window give the selection on the number of records you want to see from that if you want to see all the records give the number which get laoded in that request.
    this will show you the data loaded in that request.
    Hope it clears
    thanks

  • Duplcate records in the delta load

    BW experts,
    I am getting the following errors when doing a delta load from 2LIS_02_ITM
    into OBBP_CON, 0BBP_INV, 0BBP_PO, 0SRCT_DS1, 0SR_VEGUID.
    The delta loads show a green light for all the targets except 0SR_VEGUID and
    the error message is
    3 Duplicate record found. 2295 records used in /BIO/XSR_VEGUID
    3 Duplicate record found. 2295 records used in /BIO/PSR_VEGUID
    I tried to check the contents of the both /BIO/XSR_VEGUID and
    /BIO/PSR_VEGUID but i get a  message saying the tables are not active in the
    dictionary.
    However, i can view the data in the Info object OSR_VEGUID.
    How can i resolve this issue ?
    Any help will be appreciated.
    Many Thanks

    Kiran,
    Welcome to SDN,
    P and X tables are created only if you have 1. Time dependent Navigational Attributes ( X Table)
    2. Time Independent Master Data Attributes.. ( P table)
    Otherwise the tables will not be created.
    Arun
    What table do you see in the header when you see the data for the infoobject ? on the creen - do you see something like
    /bi0/XX0SR_VEGUID  where XX xould be some characters ... Ideally P table should be viewable...

  • Initialize the delta load

    Hi BW Experts,
    I have question...
    1. There is a ODS01 which feeds many data targets.
    2. We created a ODS02 which also will be loaded by this ODS01. The update type would be  DELTA.
    3. We created a INFOCUBE01 which will be loaded by the ODS02. The update method would be FULL UPDATE.
    4. The first time (later on i didnt get this msg) when i went to the infosource for the <b>8ODS02</b> and tried to create a infopakge to load the full update of the INFOCUBE01, i got a msg that " THERE IS NO ACTIVE DELTA INITIALIZATION FOR THIS DATASOURCE".
    The details of the msg is:
    Procedure
    You have to initialize the delta load for a DataSource before you are able to load the delta data from it.
    If you want to load deltas only for the purposes of testing, or you do not require any initialization data (because you have already uploaded it using a full upload, for example) use an initialization simulation.
    This way, only the init. entries you require are made in the control tables of the source system, and a 'dummy' entry appears in the Monitor, setting the load status to green.
    No data is in fact loaded, however, and the initialization takes only a few seconds to complete.
    Does this mean i have initialize the delta load in the ODS02 or the INFOCUBE01.
    How do i do that ?
    <i>(I actually did few full loads then i was informed that it would be a delta load from the ODS01 to ODS02,
    within the infopkg for ODS02, I selected the Delta update next time, and did start immdtly, then check the monitor, it displays no records)</i>
    I'm little confused with this initialization, and in what cases would i do it.
    Would you please help...
    Thank you,
    Tia
    Message was edited by: Tia Ismail

    1. so, you are saying for the ODS02, do a full load first.
    2. Then do a "Initialize delta process".
    3. Then do a "delta process".
    I had partially tried this, I did a full load first in one infopackage, then created another infopackage trying to do a "Initialize delta process". I get a msg as following:
    <i>Diagnosis
    Deltas have already been loaded for the init. selection of request REQU_3ZEHH34LV68LVHAWT75TJVIF8. A second initialization is therefore not possible with these selection conditions.
    Procedure
    If you want to carry out a new initialization, you have to choose selections that do not overlap.
    If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
    Choose the menu entry 'Init. Selections in the Source System' from the Scheduler.</i>
    Any thoughts...
    Thank you,
    Tia

  • In the Firefox browser, when i click button in ADF page, then popup  the OAF page in iframe tag,and then when i  click the PPR bean in  OAF page, then Firefox  browser reload to ADF page. This is not the right response,browser should not reload the ADF pa

    In the Firefox browser, when i click button in ADF page, then popup  the OAF page in iframe tag,and then when i  click the PPR bean in  OAF page, then Firefox  browser reload to ADF page. This is not the right response,browser should not reload the ADF page.It should stays in OAF page or goto another OAF page. and in other browser such ad IE,We get the right response.

    hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
    [[Fix problems connecting to websites after updating Firefox]]

  • How should we get the out put file-name same as in put file-name in file to

    Hi frnds,
    having hundreds of files in the sender system with different names, how should we get the out put file-name  in the receiver system same as the in put file-name in file to file scenario ?
    Thanks in advance.
    truly,
    snrvakiti.

    Hi,
    In Receiver File Adapter you can set under 'Adapter-Specific Message Properties'
    check Use Adapter-Specific Message Properties
    check Fail on Missing Adapter Message Properties
    Check File Name
    Have a look at this link,  [File_to_File|http://allsapnetweavernotes.blogspot.com/2008/09/how-can-i-access-filename-from-fileftp.html]
    Regards,
    P.Rajesh

  • How we can automate the data loading from BI-BPC

    Dear  Guru's
    Thanks for watching this thread,my question is
                  How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
    How we can automate the data loading from  BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
    Thanks in Advance,
    Srinivasan.

    Here are some options
    1) Use standars packages and schedule them :
        A) Openhub masterdata file into a flat file/ BPC App server  and Schedule the package - Import Master Data from a Data File and  other relevent packages.
    2 ) Using Custom Tasks in Custom Packages ( SSIS)
    Procedure
    From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
    Create a new package, or select an existing package to modify.
    Choose  Task  Register Custom Task .
    In the Task Location field, browse for the target .dll file.
    Note
    By default, the .dll files are stored in BPC/Websrvr/bin.
    End of the note.
    Enter a task description, select an appropriate icon, then click OK.
    Drag the icon to the designer window. Enter data as required.
    Save the package.

  • How should I set the iMac display in normal mode

    how should I set the iMac display in normal mode

    Not certain if this is what you're asking, but the normal setup would be System Preferences>Displays>Disply tab and select 'Best for display'.

  • How can I add the progress loading box when I load a module?

    Hi everyone, how can I add the progress loading box when I
    load a
    module? Is it an automated thing with flex or must I code it?
    Thanks.
    :)

    try using javascript onclick attribute:
    onclick="document.form.name.disabled=false"
    m

  • To create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

    to create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

    You need to be in a country to use its store - if you are not in the US with a US billing address then you cannot use the US store.
    From the US store's terms of use :
    The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

  • How should I understand the parameters/argument values in the {} and [] right after a function?

    Hi,
    How should I understand the parameters/argument values in the {} and [] right after a function?
    For instance the {[Name="control"]}[Content] part in the
    control=Excel.CurrentWorkbook(){[Name="control"]}[Content]
    and also the [Control]{0} part in the periodctrl=control[Control]{0}.
    Thanks.
    Regards,

    The "[]" operator in M is like the "." operator in C-like languages, if that helps. It takes an aggregate value with named components and it selects one of those components. In the case of the record "Foo", "Foo[Bar]"
    returns the field named Bar. In the case of the table "Baz", "Baz[Quux]" returns the column named Quux.
    Similarly, the "{}" operator in M does subscripting of lists -- like the "[]" operator in C-like languages. If "Foo" is a list, then "Foo{0}" returns the first element of the list, "Foo{1}" returns the second
    element of the list, and so on.
    In the case of tables, it's also possible to use "{}" with a record argument, in which case it will return the row which matches the record criteria -- provided there is exactly one. So if "Foo" is a table, then "Foo{[Bar = 1]}"
    will return the row for which the Bar column has a value of 1.
    Many of the data access functions in Power Query return what we call "navigation tables". Sql.Database, for instance, returns a table with columns named Name, Schema, Object, Kind and Data. Each table in the database has a single entry in this
    navigation table. When we index into the table with "table{[Schema="dbo", Object="table"]}", we're selecting the single row that matches those criteria. This gives us a record. We then want to pick the "Data" field of
    that record, which contains the actual table data. That's why there's typically a "[Data]" at the end of expressions which fetch data from the SQL table.

  • How should I change the following SELECT QUERY?

    Requirement:
    There are checks in the program for material group 2, z93 AND z94 which should be skipped if the sales org = 'JP40'.
    sales organisation is taken from the layout(SE51) dictionary fields (MODULE POOL PROGRAM)
    The select query is:
    select single matnr
                      into t_mvke-matnr  "dummy
                      from mvke
                      where matnr = t_9000-matnr
                        and vkorg = vbak-vkorg
                        and vtweg = vbak-vtweg
                        and mvgr2 in (c_z93,c_z94).
    How should I skip the material group c_z93, c_z94 only for JP40(vbak-vkorg) sales organisation, except JP40 material group should be there for other sales org. but for JP40 material group should be skipped.
    What would be the select query or should I give any kind of IF conditions before select query.
    Please help me out.

    Hi Rani K
    You can try like
    IF VBAK-VKORG = 'JP40'.
    select single matnr
    into t_mvke-matnr "dummy
    from mvke
    where matnr = t_9000-matnr
    and vkorg = vbak-vkorg
    and vtweg = vbak-vtweg.
    ELSE.
    select single matnr
    into t_mvke-matnr "dummy
    from mvke
    where matnr = t_9000-matnr
    and vkorg = vbak-vkorg
    and vtweg = vbak-vtweg
    and mvgr2 in (c_z93,c_z94).
    ENDIF.
    Thanks
    Gaurav

  • TS1424 I was trying to update my apps and all I get is waiting, how should I resolve the problem?

    I was trying to update my apps and all I get is waiting, how should I resolve the problem?

    COntact iTunes by:
    Apple - Support - iTunes - Contact Us
    Is the credit card billing address in the same country as the iTunes/App store you are trying to use? It has to be.

  • I have forgot my ipod passcode how should i remove the passcode from it

    i have forgot my ipod passcode how should i remove the passcode from it

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Backing up, updating, and restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
    You can redownload iTuns purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for

  • White Balance in Camera raw

    Every time I open an image from Bridge in CS6, into camera raw the white balance always defaults  to fluorescent.  How can I change default opening to read as"shot as"?

  • Problem in map a OneToOne relationship

    If I have a entity name e1 which has a OneToOne relationshp with another entity named e2. e1 has two column: workflow and step e2 also has the two columns: workflow and step. but these two columns are not the e2's primaryKey. how can i use e1,getE2()

  • IPad Air no connection popups every time

    My iPad Air is frequently giving me a no connection or network required popup whenever I turn it on, and throughout usage whenever I switch to one app or another. Each app will have their own no connection popup or message. If I tap okay everything i

  • Re: Product Instance Registration Error Message: "System Failure: Error w

    Hi S9 installation Gurus, Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue. Detail of Problem:- After Susessful configuration of 1) Foundation Services (Hyperion Shared Services) 2

  • Exception report based on dates

    dear all, we all know that in order for us to do an exeption report it has to be based on numbers, has anyone try doing this based on a date before? a key figure date that is. thanks in advance for your reply.