How should I replace my airport 2 with a new airport extreme

I want to replace my old airport with a new one. Should I just plug the new one in or trash the old software and start over?

By reading the user manual that came w/your router, contacting the manufacturer and/or visit their customer support/troubleshooting website.

Similar Messages

How do you replace a time capsule with a newer one

How do you replace a time capsule with a newer one?

LOL.. pull the old one out.. put the new one in. Setup the new one.. do not copy setting from the old one.. it is better to start over and never copy configuration files.. although you might get away with it.
Plug the old TC into the new one.. change it to bridge mode.
You can then access and copy old backups to the new TC if you want. Although IMHO just keep the old TC for 6months. .then wipe it and sell it or use in different role. Do start clean fresh backups on the new TC.
If that is all useless. ask the specific question and we can try for a specific answer.

I BEG of you: How do I replace an Airport Extreme base station with a 4th-generation Time Capsule as the base station?

I'll be damned if I can figure this out. I have a new late-2012 iMac (OS 10.8.3) connecting to my LAN via Airport wi-fi. (It will be Ethernet-connected, as soon as a hole is drilled into my new work table, but right now the Ethernet cable doesn't reach.) My wife uses a 2011 MacBook Air.
The LAN consists of a flying-saucer-looking Airport Extreme connected by Ethernet to the modem, plus 2 old Airport Expresses. I have an Ethernet switch too, through which I've got a TV connected and a printer connected.
I bought a 4th-generation Time Capsule about a year ago, but couldn't figure out for the life of me how to replace the Airport Extreme with it. I became so incredibly frustrated that I hid it away in a closet until now. I just tried again, with the same results. I've got both Airport Utility 5.6 (to use with the old Extreme and Expresses) and Airport Utility 6.2. I was using version 6.2 to set up the Time Capsule... or to try to. Once again, I cannot for the life of me figure out how to do it! I tried so many different Ethernet wiring connections that I now cannot remember them well enough to describe them here.
I distinctly remember that, when I tried this a year ago with my wife's MacBook Air and Airport Utility 6.2, I was presented at one point with the question whether I wanted to replace an existing base station with the Time Capsule I was trying to set up, but this time I never was presented with that option.
Is there anyone who can, in essence, hold my hand and walk me through this process step-by-step? At this point I even need to be instructed what to wire to what. I feel like a total incompetent.
My MOST sincere thanks in advance for help!
(I hope Time Capsule is the correct forum for this question. I considered the Airport forum as well, but I don't want to cross-post.)
(And, just to complicate matters, after I get this done-- assuming I ever do-- I want to use the old Airport Extreme on the outside of the house to extend the range of my LAN to the back yard... but that's for another day entirely.)

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

How can I replace an old HDD with a new larger one and keep exisiting data?

I have a 1TB Seagate Barracuda drive in my Windows 7 64-bit desktop machine. It has 3 partitions, one is the boot drive.
This drive is four years old and I would like to replace it with a new one -- probably a 3TB Barracuda. I want the new drive
to behave exactly like the old one -- not interested in upgrading to Windows 8 right now.
How would I go about cloning the old drive to the new one so that the new drive also has 3 partitions, but each one is bigger
-- three times as big, to be exact, with everything working the same as on the old drive?
I'm thinking that if I just mirror the old drive to the new (using cloning software), the new drive will have 3 smaller partitions
totaling 1TB and a big empty space of 2TB. Can I then increase the sizes of the existing partitions without destroying any data? Would the boot drive still work?
Or would it be better to create the 3 partitions of 1TB each on the new drive and then clone the old drive partitions to the
new partitions? Would the cloning software be able to do that correctly, so everything would still work? Do I need to buy partitioning software? Any advice will be appreciated. Thanks.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How do I replace my existing HD with a new one

I have existing drive with my catalogues. I want to use my new 2T WD drive as a replacement for my existing HD which is not working well. Do I clone the original and how do I tell LR 3 to recognize the new drive? Using Mac Lion.

By reading the user manual that came w/your router, contacting the manufacturer and/or visit their customer support/troubleshooting website.

Not very relevant, but how do I replace my old router with a new one?

Recently I got a new router and I don't really know how to install it. When I first moved into my house, the guys from COX (my local internet service provider) had to come in, plug in the modem and router, go outside to the electrical box, flick some switches in there, and finally got my router working.
I'm afraid that if I unplug the wires connected to my old router and plug it into my new router, I might reset everything and the COX guys have to come again and all that.
So how do I replace the router without causing chaos?

By reading the user manual that came w/your router, contacting the manufacturer and/or visit their customer support/troubleshooting website.

How can I replace a *.default profile with a new one?

I had several problems with a laptop being infected with malware. As a result FireFox would not open and thus I couldn't export the bookmarks before reformating the drive. Before reformatting the drive I copied the FireFox files in user/appdata/mozilla/firefox/ both the Local and Roaming subfolders to another drive. I installed FF 4 after the reformat, replaced the *.default files in the new profile with those I saved from the old installation and got the error message " . . all ready running."

Delete the '''parent.lock''' file, if it exists in that Profile.

How do I replace my AirPort Extreme Time Capsule with a new one?

I'm having issues setting up my new time capsule. I currently have the first gen time capsule and I'm having difficulty setting up the new one. The system is not recognizing the new one. What do I need to do??

You must use the latest utility 6.3 in the lion/mountain lion OS.. You must turn on ipv6 local link.
http://support.apple.com/kb/TS4597
If you are trying to do it over wireless.. reset to factory and start over.. the new unit must be at factory settings to work with the utility.
IMHO use ethernet.. it is far superior.. You don't have to use it once it is setup.
But the setup will go easier with hard wired connection.

How do I replace 2 pantone colors with 2 new pantone colors globally? I have a 2 PMS logo with many tint variations in it . When I replace PMS in Swatches pallette. The logo does not globally replace the selected color. es

I have a 2-PMS color logo with many tints in it of the 2 colors. When I replace the swatches in the logo to new colors, they convert from Book Color to CMYK. Can the printer work with that? How can I kee it a 2-color separation?
MaryFl

This is what I understand. You have a logo in a document that uses PMS 'A' and PMS 'B' colors and you want to change to colors PMS 'C' and PMS 'D'. If this is correct there are different ways to do this, but here is a traditional way:
Make sure Select Same Tint is turned OFF in the Preferences. And all objects are unlocked in the document.
Get the two PMS (C and D) in the document's Swatches Panel.
Select PMS 'A' and bring the 'Fill' box in focus.
From the Select menu choose Same > Fill Color.
Click on PMS 'C' in Swatches panel to replace all PMS 'A' fills with PMS 'C'.
Deselect all.
Again select PMS 'A' and this time bring 'Stroke' box in focus.
From the Select menu choose Same > Stroke Color.
Click on PMS 'C' in Swatches panel to replace all PMS 'A' strokes with PMS 'C'.
Deselect all.
Similarly using the same approach replace PMS 'B' wit PMS 'D'.
If you have CS3 / CS4 and the PMS colors in the logo are easily identifiable, you can use Live Color to change the colors pretty easily.
Hope this helps!
- Neeraj
New Note: If there are gradients / blends that use these PMS colors the above approach would not work, but Live Color can.

How do I replace the default java with a newer version?

I'm using Solaris 10 for x86 which comes with java 1.5 installed by default. I also specified that it should use the java desktop environment instead of CDE when I first logged in. I need it to use java 1.6, a JRE of which I've extracted to a directory under /opt/. I also need to remove the existing java 1.5 install. How can I do this safely?

Excuse my ignorance but I can only find the default profile in /etc/. The only contents of /home listed out with a ls -al are the . and .. directories. The only mention of the path variable in the default profile is:
export LOGNAME PATH
I am logging in as root while setting everything up.

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Replacing an Airport Extreme with Time Capsule

I have had my wireless network setup and working for a few years.
I've decided to replace my Airport Extreme with a Time Capsule.
Can I simply disconnect the Airport Extreme, connect the Time Capsule and configure it with the same SSID & Password? or is there a procedure for accomplishing this that I'm not aware of?
Rick

rickinlv wrote:
I have had my wireless network setup and working for a few years.
I've decided to replace my Airport Extreme with a Time Capsule.
Can I simply disconnect the Airport Extreme, connect the Time Capsule and configure it with the same SSID & Password? or is there a procedure for accomplishing this that I'm not aware of?
Welcome to Apple's discussion groups.
What you describe should work, but first you might want to try this approach: Use AirPort Utility to put the Extreme into "manual setup" mode. Use the menu option File -> Export Configuration File to write the configuration to a file. Replace the Extreme with the Time Capsule, put it into "manual setup" mode, and use the menu option File -> Import Configuration File to read the Extreme configuration into the Time Capsule.
Full disclosure: I haven't tried this. If it works, you'll have saved yourself several minutes of configuring. If it doesn't work, then proceed as you originally planned. And let the rest of us know how things went.

How Can I replace newScale Text Strings with Custom Values?

How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.

I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt

HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!

If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

My old MobileMe account surfaced when I was on a support call. I didn't discover it until the case was closed. How can I replace this obsolete account with my current iCloud account?

My old MobileMe account surfaced when I was on a support call. I didn't discover it until the case was closed. How can I replace this obsolete account with my current iCloud account?

Do you mean that you were using the Apple ID which is your ex-MobileMe address? It's still an Apple ID, even though MobileMe itself is dead, and there's nothing to stop you from using it as an ID with Support, or logging in here or in iTunes with it. You should make sure you have a functioning non-Apple email address associated with it.
Did you migrate your MobileMe account to iCloud before 1 August last? If so, you can set up an iCloud account using it, or if you have already set up a new and separate iCloud account you can still log in with it in System Preferences>Mail, Contacts and Calendars so that it runs alongside your iCloud account.
If you didn't migrate you can still reactivate the address the same way.
Anything where you've logged in with the ex-MobileMe address, such as support for something you registered using it or a server such as iTunes, will need to continue using it.

How should I replace my airport 2 with a new airport extreme

Similar Messages

Maybe you are looking for