How should I set the iMac display in normal mode

how should I set the iMac display in normal mode

Not certain if this is what you're asking, but the normal setup would be System Preferences>Displays>Disply tab and select 'Best for display'.

Similar Messages

I have a Samsung Intensity. It is currently set in "Alarm Only" mode. How do I set the phone back to normal mode so it will ring?

I have a Samsung Intensity. It is currently set in "Alarm Only" mode. How do I set the phone back to normal mode so it will ring?

Pumpkin-Hill, Let's get your ringtone working properly. Go to settings and tools, press 'ok', select sound settings, press 'ok', choose call sounds. then press 'ok' and select call ringtone and select the desired tone. Let us know if this helps.
sheritah_vzw
Follow us on Twitter
@VZWSupport

How do I set the imac to go to sleep after 5 min of in activity?

how do I set the imac to go to sleep after 5 min of in activity?

Hi.
Try do the following: Go to "Settings" > "Energi" (or what it's called in the english settings). From here you can adjust your settings.
Hope this was helpful.

How should i set the baseURI when a db file path with a space

if the db file in a path like c:\program file\myapplication,then i set the baseURI dbxml:c:\program file\myapplication ,some exception occur~what should i do ?
thanks a lot

The Base URI needs to be a valid URI, which means it cannot include the Windows '\' character at all. In your case, you should be fine using something along the lines of "file:////C:/program file/myapplication"
(give or take a '/' or two -- I haven't tested this).
It's a common for BDB XML users to confuse the argument to create/openContainer() (a filesystem path) with the Base URI (a URI). The meanings and requirements are different. The best thing to do is to set and use a container alias (XmlContainer::addAlias()) to use in your queries.
Regards,
George

How should I set the parameters of PID Autotuning such as relay amplitude and PV noise level?

I want to control the temperature of a room by changing the hot water flow of a radiator with a control valve. The desirable control accuracy is +/- 0.5 degree of centigrade.
What number should I set for relay amplitude? And what number should I set for PV noise level?

Hello loghmani,
If your output is saturating try to reduce your relay amplitude and/or reduce the gain Kc of the PID controller before starting the autotuning procedure. You can find more information about each of the parameters that you've inquired about at this KnowledgeBase article.
I would recommend taking a look at the General Auto PID Simulator.vi example. You can find this example by doing a search in the example finder or by clicking linked example at the bottom of the detailed help page of the Autotuning PID.vi.
If you haven't looked at the PID user manual that also contains useful information on setting up PID algorithims and Autotuning.
David A
National Instruments
FlexRIO Product Support Engineer

How do I set the Shutter Speed in Manual Mode on my EOS 70D

I recently was forced to upgrade to a Canon 70D after my 50D died from a fall. I am not happy with the ease of setting the Shutter speed while in Manual mode. The only way I can currently set the shutter speed while in Manual mode, is to go to the info screen and set the shutter speed with the touch screen. The manual states that I should be able to set the Shutter speed with the Main Dial, behind the shutter release. ( which is how it was on the 50D). I can control the Aperture with the quick control dial. The Function Lock button is off.
I am sure this is do to some setting I have wrong, that is not allowing me to fix this issue, but I cant figure out what it could be after hours on the net and in the manual. I would greatly appreciate it if someone could help me with this issue.
Thanks
Gene

Another possible solution is to use a battery grip on your 70D and see if the dial on the grip will change the shutter speed.
There are some discussions about this problem on some earlier models Canon DSLR. Check it out.
http://www.dpreview.com/forums/thread/2638326

How should I set the print control in a SmartForm for barcoding?

I already have defined the prefix(SBP27) and suffix(SBS01) print controls, now I would like to know how set them in the field in the Smart Form.

Jorge,
The forum you have posted your question in is for questions related to the SAP Business One SDK. Is your question related to the Business One SDK?
Eddy

Running T-code miro, how should i set the DRSEG-SGTXT value automatically

Hi experts,
When i run t-code miro, i want to fill into the text value(DRSEG-SGTXT) on the item line automatically.
Its value is the PO description by default. I has tested the user exits (Related to T-Code MIRO,such as LMR1M001/002/003/004 etc) and badi(INVOICE_UPDATE). They can't work very well.
I'd like to input Purchasing Document Number and enter, material items are display and its text value(DRSEG-SGTXT) is also filled in.
Any clue is appreciated.
- Daniel

Hello,
start the report RSMODPRF and see the documentation.
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
There are some threads in SDN for this topic, you can search in SDN
Kind regards,
JP

How can i set the resolution on my imac ''27 in to 1024*768?

hello,
i'm new to imac
how can i set the resolution on my imac ''27 in to 1024*768?
its only gives me to options
1- 1280*720
2-800*600
thanks

My mid-2011 27" iMac, ML 8.3 has 1024x768:

How can i set the number of results that can be displayed on the page

hello im just wondering how i can set the numebr of results that can be dispaleyd on the jsp, when the there are more than 5 results i want the suer to press more
how is this odne could anyone send me a example code?
and also how can i get results from the query displayed as select list options, so that when they press one of teh results it goes to correspnding page
Thank you

Hi,
I assume that you have the connection to the DB.
You can try this code.
Statement stmt = con.createStatement();
String sql = "<some sql code for selecting>";
ResultSet rs = stmt.executeQuery(sql);
rs.last();
int count = rs.getRow(); // this is the number that shows how many numbers you have after select query
rs.first(); //we moved cursor again to the begining of the results.
if (count > 5) {
for (int i=0;i<5;i++) {
//as an example
rs.getString(0);
rs.getString(1);
rs.getString(2);
out.print("<a href='morePage.jsp'>More</a>");
else {
for (int i=0;i<count;i++){
//as an example
rs.getString(0);
rs.getString(1);
rs.getString(2);
rs.close();
stmt.close();I hope this would help you.
If you have problems let me know..
Ismail TURK

I purchased my imac in the United States and now I live in the United Kingdom. How do I set the computer to know where we live as it defaults to US settings and I am having trouble registering my iphone

I purchased my imac in the United States and now I live in the United Kingdom. How do I set the computer to know where we live as it defaults to US settings and I am having trouble registering my iphone. I had used it in the US for two years.

You're Welcome..
See Here for
Changing Account Information
http://support.apple.com/kb/HT1918
Changing iTunes Store Account
http://support.apple.com/kb/HT1311
Apple ID FAQ
http://support.apple.com/kb/HE37

How do I get the iMac to display thumbnails and not an icon of jpeg photos?

Hi folks,
I just purchased my first Mac, an Imac. I was browsing through a folder, using Finder, containing photos files from my latest trip.
Under Windows, I used to tell Windows Explorer to show thumbnails of the photos.
How do I get the iMac and Finder to show the thumbnails? It only wants to show a silly jpg icon which doesn't tell me much about what the photo looks like.
Thanks.

That was quick!
I have a folder of JPEG photos on my HD. This folder was created over a year ago when I was using Panther.
When I open it and select "Show View Options" I get a different window with options like "Date Created" and "Date Modified" etc.
There is no preview option or a slider to alter the icon sizes - merely a choice of large or small icons.
Ian.

Colour Calibration / White Point setting - Is Imac Display really professional quality

I am trying to calibrate my imac 27" using i1 Display2 calibration software. I am trying to set a traget of 6500 using the software but it advises the current is only 5600 and suggests moving the RGB sliders to get this current white point up to my 6500 target. Unfortunatly i have no idea where i find these sliders on my imac. Can anyone advise how i change my current white point to get to the 6500 target?
Also, on the brightness issue, does shades work to reduce my brightness or will it simply interfere with my colour calibration?
Finally, i was going to use my iMac for professional photography. (Mainly on line but some print work required). Honestly, is the iMac display up to the job or should i consider changing
Thanks
Gary

Corbybhy, the glossy screen is the biggest and silliest myth out there. Really.
I have been a professional art director & designer for over 26 years, and by the way, for many years my high end professional CRTS were made of glass (and glossy). Another myth is that the screens cannot be calibrated, and are too bright. Hogwash. I use Spyder3Pro and have had few problems, guessing your device will be the same. Actually, the monitors seem to stay consistant for a heck of a lot longer than the old high end CRTs did. In the old days, most professionals calibrated to 5000k, but these days 6500k is the standard.
The amount of MISINFORMATION that is being spewed always amazes me. If you can keep your lighting consistant and somewhat dim, your life will be easier. Reflections are simply not a major issue, and are also overblown as a issue (by the way, my iMac sits next to a window, I just use shades to dim the ambient light).
I work mostly in print, and produce mostly publications, advertising & marketing materials. I have ZERO issues with my screen matching my proofs. ZERO. I do a huge amount of imaging, retouching & post-processing... all from my 27" iMac.

I accidentally formated iMac drive and lost data. How can I recover the iMac's HD data??

I accidently formated an iMac HD that I had connected to my MBP in target disk mode. (I also had a new WD harddrive connected to my MBP at the same time and was supposed to format the WD drive in disk ultility but clicked the wrong drive. I still can't believe what a boneheaded thing that was to do..)
Anyway, can I recover the files on the iMac and if so, how can it be done?
I can only connect to the iMac via target disk mode because the iMac display is not working.
I have not zero'd out the iMac's HD or written anything to it so I assume the data should be there all fully intact for the most part.

Thanks varjak paw and ds store. I ended up using data rescue 3. I called tech tool pro and they said that DR3 would probably help me. It did, it recovered what appeaers to be all of the files and a whole bunch of deleted files.
A couple of notes:
When I ran DR3, it kept giving me a disk slowdown error and said that the iMac disk might be going. Turns out my computer that I was running DR3 on had to be set so that it stayed on all the time (no screen saver, no disk or display sleep, etc.).
Another reason I went with DR3 over SubRosaSoft was that when I called DR3, I was talking to somebody alive in less than a minute and they transferred me to tech support where they gave me instructions on how to use their software. When I called SubRosaSoft, I couldn't get anybody alive to talk to after several tries.

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How should I set the iMac display in normal mode

Similar Messages

Maybe you are looking for