How should I update the transaction FTXP through recieved inbound file with

I am getting the file from another system to my applicaton server, from the I have to map the data to FTXP transaction. Could you please provide any BAPI function modules are available.

Hi
I am working on the similar req. Can you please let me know how you were able to resolve this issue.
Thanks in advance..
Van

Similar Messages

How do you update the Bios safely when using onboard RAID mirror? Z87-G45

How do you update the Bios safely when using onboard RAID with Z87-G45? I'm using a simple two drive, RAID 1 mirror setup.
I'm currently at bios 1.4, and want to move up. However, last time I upgraded the BIOS, the machine rebooted with improper settings for the RAID (they get hosed during BIOS flash) and Windows decided to auto-repair the only boot drive it could see, one half of the mirror, because it couldn't see the RAID array correctly and *POOF* bare-metal reinstall required.
My PC will not let me press the DEL key on bootup to access the bios, even with MSI Fast Boot not installed. It just ignores the DEL key and tries to load windows which, if that happens, will flame-out my RAID array after a bios flash if I can't catch it to enable the RAID first before windows loads.
I do not want to rebuild my PC again simply because I do a BIOS update.

FYI: BIOS 1.4 & 1.8 are using the same RAID version: 12.7.0.1936
based on this RAID surprise should not hapends.
But as pandaz says if you have no issues, leave bios update alone.
there are still risks something to messed up,
best do a backup of your data just in case if you want to try latest version

How should i modify the hp54600a instrument driver for GPIB so i can use it for RS232 interface ?

I try to modify the hp54600a instrument driver for GPIB, so i can use it with RS232. But somehow it didnt work. When i try to run the initilize it, the prgoram show VISA read error (time is up before the process is finish). How should I modify the VI so I can use it with RS232 interface ?

First, check the instrument's user manual to see if the GPIB and serial command sets are the same. Also check to see what EOS(End of String) characters the instrument requires. Then, do a loopback test to test communication in LabVIEW.
Search Results: Serial Loopback Test
Ray K
NI Applications EngineerMessage Edited by Molly K on 02-18-2005 10:57 PM

Can we update the Category attribute values of a file

Can we update the Category attibute values of a file with out checkout the file?
I have set the version configuration to folder and try to update the category attribute values of a file under that folder,
It is asking to checkout the file before modifying the category attibute values.
Is it required to checkout the file before modifying the category attribute values of that file?
Is there any way to update the category attribute values without checkout the file?
Please help on this

One of the ways i can think of is using Batch Loader script for large number of files. Mention such files in Batch Loader script, and it will update category and all meta-data required in terms of next revision.
In case number of files are less manual checkout and check-in will help.

HT1918 I cancelled a payment through PayPal. How do I update the payment for that charge? I looked at my payment information and it has my credit card information. I'm not sure where to update the PayPal part of payment.

I cancelled a payment through PayPal. How do I update the payment for that charge? I looked at my payment information and it has my credit card information. I'm not sure where to update the payment that was associated with my PayPal account? I am not sure what that paid for? I am trying to process updates on my IPhone & IPad for apps. I have already downloaded.

Hi Xellana, and a warm welcome to the forums!
I'm looking for information and pricing on possibly upgrading the processor from the PowerPC to Intel.
While anything is possible if you had enough money... NOPE, you can't change the CPUs to Intel, nor can you get any faster PPC upgrades for it. It'd be far cheaper to buy a new IntelMac than to replace everything inside the G5, and I mean just about everything, then figure out how to machine the case & such to mount Intel Logic Board, Graphic Card & such.
Sorry.

I have problems updating my app in the appstore. How should i update using itunes? Currently, i'm unable to use all of my apps.

I have problems updating my apps in appstore for my IPad. How should i update it using itunes? I'm unable to see all the apps currently.

Hallo. If all of your apps purchases from the same Apple ID, you can try to update them on iTunes, ways as below:
iTunes 12 for Windows: Download previous purchases from the iTunes Store
iTunes 12 for Mac: Download previous purchases from the iTunes Store
Regards,
Anson

HT4009 I am trying to make an in-app purchase, and it will not let the transaction go through after I click "buy." How do I fix this?

I am trying to make an in-app purchase, and it will not let the trasaction go through after I click "buy." How do I fix this?

By 'not letting the transaction go through' you mean ... ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

TS1424 I was trying to update my apps and all I get is waiting, how should I resolve the problem?

I was trying to update my apps and all I get is waiting, how should I resolve the problem?

COntact iTunes by:
Apple - Support - iTunes - Contact Us
Is the credit card billing address in the same country as the iTunes/App store you are trying to use? It has to be.

Work order should not update the fields in PR

Hi Gurus
My requirements is that workorder should not updates the purchasing data fields in PR do not go to the shoping cart. How can make it possible.
Thanks in Advance

Hi,
I am not sure of your requirement clearly but check up the below user exits :-
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
or BADI :- IWO1_PREQ_BADI BAdI for Manipulation of P.Reqs from Orders + Networks ,SE18
regrds
pushpa

How do I update the software on my Airport Express?

Hello everyone,
I have an Airport Extreme base station acting as WDS and an Airport Express station. I recently upgraded the security on the Airport Extreme base station from 128-WEP to WPA (Personal), but I don't know whether I have to do something to the Airport Express base station. It's green light is on. Do I need to do something? Also, how do I update the software in the Express? Whenever I open the Airport Admin Utility, the only thing that comes up on a scan is my Extreme base station. Any advice would be most appreciated.

yes you need to update your Airpost Express. I just went through this last week with two of my Airport Expresses. I updated my Base and my Remote's light was green but was unable to view it in Airport Admin Utility. So this is what I ended up doing and it works great.
First bring the Airport Express you are working on in the same room as your computer......just the ease of seeing what is going on with the Airport Express. Next you need to reset it.....take a paper clip and push in the little button next to the Audio port and hold in 10 seconds. Then unplug the unit wait 10 seconds and plug it back in. wait about 3 minutes and then you will need to use Airport Set Up Assistant. You will need to make sure you have WPA Personal on your Airport Express too.
don't forget to make sure you have the update firmware too.
http://www.apple.com/support/airport/
I hope this helps.....
Powerbook G4 1.67 15", 1 gig ram, 128 vram, 80 gig harddrive Mac OS X (10.4.6) Powermac G3 266 mt, Dell 5150,ibook G4, 1 gig shuffle, epson printers, airport

How do i update the software on my ipod touch? i went to settings, then general, but theres no option called software updates.

How do i update the software on my ipod touch? i went to settings, then general, but theres no option called software updates.

You needing to be running iOS 5 or later in order to do a Software Update from the device. To run iOS 5 you need a 3G or 4G iPod Touch. So if you really have a 4G iPod Touch, connect it to iTunes and you should be prompted about an update to its version of iOS.
See here for more information: iOS: How to update your iPhone, iPad, or iPod touch
B-rock

My old Apple ID is on my iPhone, but this has been transferred to a new Apple ID. The iCloud on my phone is requesting the password for the old Apple ID, but this no longer exists. How do I update the iCloud Apple ID on my iPhone?

My old Apple ID is on my iPhone, but this has been transferred to a new Apple ID. The iCloud on my phone is requesting the password for the old Apple ID, but this no longer exists. How do I update the iCloud Apple ID on my iPhone? When I try to get the old passwork through forgot my password, the reply is that there is no account that exists.

Try the following....
Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID.

How can I update the QuickLook database?

About 10 days ago my dock in Leopard crashed and I could not find it without restarting. Now I see in the console at startup:
Dock[150] [QL ERROR] Generator database update takes too long... we will use what we currently have
Since I have updated the Info.plist on my .tex files to conform to public.plain-text I would like quicklook to take note of it, but nothing I do will force it to take effect. On the command line qlmanage -r shows "resetting all generators" but qlmanage -m ends with the statement "generators change detected: NO". Any help would be greatly appreciated. Thanks

This is by no means a complete answer. I still get the error messages in the console. However, I now have a partial answer to my question. After I log in, I run Cocktail 4.0.1 for Leopard, Select System then Databases. Then Rebuild Launch Services database with Restore default file associations enabled. About three quarters of the way through executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid the .tex files lose the icon when selected, show the label "TEX" and can now be viewed with a touch of the space bar. What a pleasure. To the poster who recommends staying with Tiger, I say I never want to give up the pleasure of having Quick Look a spacebar away for all my files.
Unfortunately, when I logout, restart or shutdown, once again, none of the org.tug.tex files are registered as public.plain-text and only the icon appears. To regain Quick Look capability I have to Rebuild Launch Services database. It only takes a few minutes, but I would like to automate the process somehow at login, but I have no idea how to do this. I will probably stay logged in for long periods of time, hoping that an update in the future will resolve this.

How can I update the thumbnails in the slide panel when a slide has been changed?

When the text in a slide has been changed, how can you update the thumbnail in the slide panel to reflect this change?
We translated slides, but the slides in the slide panel are still in English.
Thanks for your help.

the slides should update automatically as you type
are you using a theme you created yourself, or one you have added for this show?
when you play the show, does the slides show correctly? If they are OK you could still show the presentation.
also what Mac are you using and what graphic crd is installed?

How do I update the Bank Account to pay my iCloud Storage plan

HOw ow to update the Bank account to pay my iCloud Storage Plan

Hey,
Hopefully this can help you:
iOS:
Go to Settings > iTunes & App Store, tap your Apple ID, and tap View Apple ID. Then tap Payment Information, and update your account. You might need to enter your Apple ID password.
n
If you are not on a device running iOS check out this link which guides you through updating your iCloud payment information for each apple product.
iCloud storage upgrades and downgrades - Apple Support

How should I update the transaction FTXP through recieved inbound file with

Similar Messages

Maybe you are looking for