How should the TL be reporting on the CR?

1)Default on modification which was executed post CH7 discharge, never reaffirmed and no further monetary liability.After mod. default TL’s continued to report CH7 status, closed account, 0 balance, etc. for several years (which appeared to be correctly reporting). 2)Now, a few years after the mod. default, one TL is reporting status as open, late, foreclosure after co-signer filed a CH7 last year which then was subsequently converted to CH13 this year, approved by the courts with the case now closed. How should the TL report for 1)? I thought it would continue to report CH7 status, closed account, 0 balance, etc. for party 1) I am trying to understand how the reporting should take place on a co-signed note and mortgage when both signers have filed as described above. Thank you for your input.

There are several AirPort models, but your Internet Service Provider modem should jack into the circular looking icon, and any local ethernet cables (if any) should jack into the double arrow looking icon. Hook 'em up, shut everything down, then power them up in order: ISP broadband modem, AirPort, computers.
http://tidbits.com/article/8813.
One caveat, does your ISP's modem provide DHCP/DNS/wireless services? If so, then your AirPort needs to not duplicate those services.

Similar Messages

How should the new note & mortgage servicer report the loan on the credit report ?

History... Default on a modification to original note and mortgage with same lender/service provider that was made (the modification) after Chapter 7 bankruptcy discharge and never reaffirmed, no further monetary liability to signer on the note. After the modification default the loan is transferred to a new loan servicer. The trade lines continue to report CH7 status from the original loan service provider, closed account, 0 balance, etc. from the original servicer of the loan, nothing from the new servicer. A second modification is attempted via the new loan servicer and denied, After the modification denial, co-signer files CH 7. The signer on the note and mortgage quitclaims the property to co-signer. Then the foreclosure process starts with the new loan servicer and the new loan servicer places a new trade line on the signer's credit report showing foreclosure status, account open, late, account balance shown, etc. During the foreclosure process with the new loan servicer the co-signer files a CH 13, which is approved by the courts and the case is now closed. Regarding the signer of the note and mortgage, (not the co-signer), I thought the new loan servicer would have to report the loan on the credit report just as the prior original servicer did, CH7 status, closed account, 0 balance, etc. I’m trying to make sense of how this is supposed to be reporting from the new loan servicer for the signer of the note and mortgage who quitclaimed the property. Thanks

Localization does not change any of the data or text objects that you created on the report. It will change special fields and tooltips that are a part of the viewer. I believe it might also change the formatting of dates and numbers. Anything more than that is translation not localization.

How should the DOCTYPE statement appear when saving as XML?

This seems so trivial, but I cannot figure it out.
When I save a Frame file as XML, the DOCTYPE statement is written as
<?DOCTYPE ..... ?>
instead of
<!DOCTYPE ..... >
I noticed this because Frame exports the content of empty table cells as the nobreaking space entity. When I try to open the XML file in a browser, the browser cannot parse the nobreaking space entity, even if I include its definition in the ?DOCTYPE statement. Changing the DOCTYPE statement to <!DOCTYPE ... > makes the ENTITY definition visible to the browser.
What am I missing?
Thanks,
Van

Van,
I tried that document and got the expected and correct <!DOCTYPE declaration.
I'm at a loss to know what to suggest. This will not be anything that can be set in maker.ini because there are no circumstances where a processing instruction should replace the real DOCTYPE declaration.
This is what my FrameMaker 9 produced:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE Chapter SYSTEM "file:///C:/Program%20Files/Adobe/Adobe%20Technical%20Communication%20Suite%202/Adobe%20F rameMaker%209/structure/xml/Book/app_xml/Book.DTD" [

<!NOTATION cgm SYSTEM "">
<!ENTITY Equation1 SYSTEM "Equation12.cgm" NDATA cgm>
<!ENTITY Equation2 SYSTEM "Equation23.cgm" NDATA cgm>
<!ENTITY Equation3 SYSTEM "Equation34.cgm" NDATA cgm>

]>
Regards
Ian

How should the "recall" key work? Is there a design defect?

I purchased a LCD TV/DVD unit (NS-LDVD26Q-10A) last week. I connected it directly to cable (no cable box), channel scanned, etc. It works fine EXCEPT the "recall" key does not remember the prior channel after a few minutes. I'm using the remote that came with the TV and key in the channel (24 in this case) and then key in another channel (7.1). It makes no difference whether I use the "OK" key after each entry or just wait a few seconds for it to accept the input.
Hitting the "recall" key will work a few times but then no longer switches between the two channels after a few minutes. I sent email to the customer service department and followed their instructions (remove batteries from remote control & reinsert, unplug TV and re-scan channels) but it didn't solve the problem. They then told me to return the TV for a replacement which I did. However, the problem is the same in the new TV.
I have never seen a "recall" key that did not remember the prior channel until it was turned off. The manual does not give any more instruction and I can not find any more documentation on the web site.
Is this a design defect? I spoke with customer service and they were only able to offer the simple advise above. This is an engineering or documentation problem. What is the answer?

It might be overkill for your particular case, but Eclipse has done all that work already with their plugin infrastructure. They do lazy loading for almost everything because a typical Eclipse installation can have hundreds of plugins of which only 1-2 dozens are loaded and used at the same time.
You might want to move your descriptive data completely outside the plugin classes (in a porperties file for example). You'll need to have a central way to register/identify your plugins anyway, so putting the pure description there might be a good idea.
Eclipse even goes as far as defning available actions and menu entries in properties files. The plugin class only gets loaded once the menu item is selected.

2 domain, each with 2 way transitive truts, with sub domains pointing to the same DNS server (how should forward and reserver look zone be configured)

Hello,
I found a test environment and I just trying to understand how it works.
If I have two domains (a.com and b.com) with sub domains(a1.com and b1.com) with two way trust and I want them to point to a Windows DNS server. How should the Forward lookup zones and Reverse lookup zones be configured? In forward lookup
zones do I just add a new zone, make them all primary since only one DNS server, add a.com and b.com and do the same for reverse zones.
Do the sub domains need to be added? What about pointers? Do I add the IP address of a.com and b.com in reverse lookup zones.
A side question: When you create a Domain with dns AD intergrated the forward and reserve lookup are automatically created. You don't need to add the zone of the domain you just created but have to add zones of other domains.

Hello,
I found a test environment and I just trying to understand how it works.
If I have two domains (a.com and b.com) with sub domains(a1.com and b1.com) with two way trust and I want them to point to a Windows DNS server. How should the Forward lookup zones and Reverse lookup zones be configured? In forward lookup
zones do I just add a new zone, make them all primary since only one DNS server, add a.com and b.com and do the same for reverse zones.
Do the sub domains need to be added? What about pointers? Do I add the IP address of a.com and b.com in reverse lookup zones.
A side question: When you create a Domain with dns AD intergrated the forward and reserve lookup are automatically created. You don't need to add the zone of the domain you just created but have to add zones of other domains.
Make each domain controller as a DNS server too. Reverse lookup zones & forwarders are not replicated automatically. You can create AD-Integrated reverse lookup zone & set the replication scope.
You can create AD-Integrated DNS zones in the parent/root domain, set the replication scope to the forest-wide & delegate the zones for handling request locally. Once you create AD-Integrated DNS zone & set the replication scope forest wide, all
the zones will appear automatically in each domain's DNS server.
http://awinish.wordpress.com/2011/04/09/configuring-dns-in-child-domain/
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

How to generate changes/ audit reports made on CLI in CSM 3.3.1

Hi guys,
I have a CSM 3.3.1 installed on a Windows Server 2003 SP2.
I have manage a ASA firewall and I would like to track all the changes being made on the ASA firewall CLI via the CSM 3.3.1.
Does anyone know how should I generate such report please?

Your last step should be to import the signed certificate back into your client PKCS#12 keystore, client-keystore.jks.
This file contains the private key used to create your signing requets originally, and must be matched when importing the signed certificate back in.
I think you will need to follow steps 5 & 6 in your DER example to complete the client PKCS12 keystore (including -storetype pkcs12 argument on the import statement).
Another way is to simply convert the keystore created in your DER example into a pkcs#12, by using JRE1.6 command:
keytool importkeystore -srckeystore [jks keystore] -srckeystoretype jks -destkeystore [pkcs12 keystore] -destkeystorestype pkcs12

How Should I Set my Settings in iTunes?

I have iCloud, Lion, iOS5....everything. Should I have to sync my iPad and iMac at all? And how should the settings be set in iTunes. I notice that I have checked that iCal, Contacts and everything to Sunc, but shouldn't they be unchecked if they automatically go to both with iCloud? I thought I had them unchecked but they are checked and are syncing when i sync my iPad. Will this give me double entries? Please clarify the settings in iTune...checked to sync or unchecked? Thanks.

If you are syncing your Calendar and Contacts with iCloud - you do not want to sync them with the computer as well becuase you could end up with duplicate entries. So uncheck them in iTunes so that they do not sync. If you uncheck them in iTunes, you will have to click on the Apply button in the lower right corner of iTunes in order to lock in the sync changes.
If you do not want to do so, you don't have to sync with your Mac. That is your choice now with iOS 5.

How should i use the two results sets in one single report data region?

Hi frnz,
I have to create a report using the below condition...
Here my given data set query gives you the two result sets ,so how should i use that two result sets information in single report....when i accessing that data set query it will take the values off the first result set not for the second result set.
without using sub report and look up functionality..... if possible
is there any way to achieve this.....Please let me know..
Thanks!

You cant get both resultsets in SSRS. SSRS dataset will only take the first resultset
you need to either create them as separate queries or merge them into a single resultset and return with ad additional hardcoded field which indicates resultset (ie resultset1,resultset2 etc)
Then inside SSRS report you can filter on the field to fetch individual resultsets at required places. While merging you need to make sure metadata of two resultsets are made consistent ie number of columns and correcponding column data types should be same.
In absence of required number of columns just put some placeholders using NULL
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How should we we validate the pn structure in hr abap reports?

Hi Experts,
i am done some coding by using LDB PNP , in that program i got selection screen for PN and PERNR tables.
but when i am validating the program by using pernr structure it will pic up the data given by the pernr and personel area.
when i am given dates in pn structure it will will not trigger . i am not getting how should i go through pn structure .
Please give some help on that.
Thanks in advance.
Venkat.

Hi Experts,
i am done some coding by using LDB PNP , in that program i got selection screen for PN and PERNR tables.
but when i am validating the program by using pernr structure it will pic up the data given by the pernr and personel area.
when i am given dates in pn structure it will will not trigger . i am not getting how should i go through pn structure .
Please give some help on that.
Thanks in advance.
Venkat.

How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles pannel because it's locked. I would also like to know how I shold tag my cove content. I dont' want rea

How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles panel because it's locked. I would also like to know how I should tag my cove content. I don't want the reader to get lost in content other than the body of the report, but I also don't want to ignore some content completely by tagging it as artifacts. What should I do y'all?
Thanks,
Josh

Hi Rob,
From the screen shots it looks like your script is not formatted properly (you may refer to 'Paladin Script' in 'Sample Project' to get an idea of how the script should be formatted.).
Further please follow the steps mentioned below to use Story to PP workflow.
Create a new Film script in Adobe Story
Create scene heading – INT. LOCATION – Day (these will show up in the outline view panel on left hand side)
Hit enter, hit TAB
Enter the name of the speaker, hit TAB or ENTER
Copy over the transcribed text
Build your script this way
Number scenes from the production menu
Export ASTX file for your script : File->Export->.astx
Open Premiere Pro
Create a new project, bring in media
In the project pane, find the "Scene" column
For the clip that contains the spoken text, assign the same scene number to the clip as you have in the story script (lets say both are scene 1)
Click out of the scene box in the project panel in Ppro
Right click on the scene that you just assigned a scene number to and select – attach Story script
Select the .astx fle you exported in step 8
Click ok
You should now see the script data in the metadata panel for the clip in the metadata panel.
You can now run speech to text based on "Embedded Script metadata" to time align spoken word to the script.
Let us know if this is helpful.
Thanks
Rashi - Story Team

I bought and retend a movie from itunes. The Trailer had Portuguese subtitles. The film rented hasn´t subtitles in Portuguese. How should do for get a version with Portuguese subtitles . Can you help me ?

I bought and retend a movie from itunes.
The Trailer had Portuguese subtitles.
The film rented hasn´t subtitles in Portuguese.
How should do for get a version with Portuguese subtitles ?

If the film's description page in the store says that it has Portuguese subtitles then they should show as an option when playing it : iTunes: Language settings for video - Apple Support
If it doesn't show an option then the film might have been mis-labelled in the store, in which case try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How to add characteristic in report without having in the multi provider.

Hi All,
I need one requirement to add characteristic in report that is not available in the multiprovider . That field is available on the table level in the BI. How should i bring same field into report level with out adding MP. Note : should not add new filed in to exiting flow .
Please give suggestion how do approach this scenario .
Regards,
Veera.

Hi ,
If you are working in BI7 then u can use infoset to join the cube and charecteristic(the field that ur going to add), I hope your infoprovider is a cube.
Jay

How should I deal with it in the BMM Layer

Hi all,
I need a suggestion in a problem.
Here is the scenario,
In the physical layer, There are some fact to fact joins.
ProductFact ----< PolicyFact ----< PolicyCoverFact ----< ClaimFact ----< ClaimPaymentFact ----< CorrespondenceFact
There are some conformed dimension tables given below
Geography is joined to ProductFact, ClaimFact
Organisation is joined to PolicyCoverFact, CorrespondenceFact
Currency is joined to PolicyFact, ClaimPaymentFact
Also there are non-conformed dimensions such as,
ProductType is joined to ProductFact
PolicyCoverType is joined to PolicyCoverFact
and there are many more......What I know is when there are fact to fact joins, we should make a logical table in the BMM layer and add both fact tables to the same LTS, But in this case, almost all the fact tables are joined directly.
How should I deal with these fact to fact joins in the BMM layer? Any suggestions?
Edited by: LavaRider on Aug 25, 2010 2:47 AM

LavaRider wrote:
I have to create many LTS for the fact table......
1 LTS for ProductFact
1 LTS for ProductFact & PolicyFact (which contain ProductFact and PolicyFact as sources)
1 LTS for ProductFact , PolicyFact & PolicyCoverFact ........
and so on.....
have I understood correctly? Is that what you mean?Yes, the reason why I said to "keep" the firsts fact table in each source is to make the dimension work.
For example, if the "product dimension" is only linked to "product fact", but not "policy fact" then you won't be able to do a report based on "product dimension" and "policy fact". Right ? To be able to do this report, OBIEE must do a join with "product fact" (this fact table become an intersection table). That's why you will add product fact in the "policy fact" source. Same for others source.
But the name of "ProductFact & PolicyFact" source can be "policy fact". Because each row of this source is a policy fact.
For the 3rd table, each row is a "policy cover fact". But to be able to join with "product dimension" and "policy dimension", you need to integrate "policy fact" and "product fact" tables in the logical source.
and so on.

Report: How long the user has not logged into SSHR

Hi experts,
I am looking for a report, which showing me, how long the user has not been logged into SSHR?. Because some poeple dosn't work any more in the company, and the list should enable use to deactivate their accounts.
Thanks in advance
Mehdi

The AOL signon capabilities are good and you'll find useful stuff in those links.
If you're after something quick in SQL try this:
SELECT last_logon_date, user_name
FROM fnd_user
WHERE trunc(last_logon_date) < trunc(sysdate) - 90;
That will get you everyone who hasn't logged in for 90 days.
Edited by: Duncan Casemore on Jan 20, 2011 9:26 AM

HT1725 Some songs that I paid for fully downloaded, but it is only playing the small sample piece from the Itunes store. How should I fix this?

I had a Wish List with about 7 or 8 songs on there and I purchased them today. They all downloaded fine, except for 2. These two songs completed the download from what the computer says, but it will only play the short sample avaliable from the Itunes store. How should I fix this?

Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting them from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

How should the TL be reporting on the CR?

Similar Messages

Maybe you are looking for