How should we determine whether a business document is edi enabled

Hi,
One of my requirement is to find whether a business document is edi enabled or not.Example : Sales Order,ASN,PO,Planning Schedule,Warehouse Shipping Order,Warehouse Shipping Advice.The requirement is we should be able to send these documents to/from SAP system.
Custom development is not preferred.Could any one help me in saying how should I research whether a these documents are EDI enabled or not.
Regards ,
Nagaraju Donikena.

Nagaraju,
If you are talking about IDOCs for the documents that you have specified, then they are NOT EDI enabled. EDI is nothing but a specific format.
You might need a middleware.
Regards,
Ravi
Message was edited by: Ravikumar Allampallam

Similar Messages

How can I determine which Layout Designer documents go with a business part

How can I determine which Layout Designer documents go with a business parter? I need to be able to query the database and make sure the right business partners are assigned to the right Layout Designer documents without going into the Layout Designer.
TJA

Hi,
You may check this thread:
Print Layouts related to Business Partners
Thanks,
Gordon

How do I determine whether I have PCI Express v1.1 or v2.0?

This article in Mac Fixit states that computers with PCI Express v1.1 slots will NOT be able to take full advantage of OpenCL in Snow Leopard:
http://www.macfixit.com/article.php?story=20090612121357227
... In terms of PCI Express, My Mac Pro is on the cusp. PCI 2.0 was announced in January 2007 and presumably made it's way onto the assembly line a few months after that. I bought my refurbished Mac Pro in June 2007. I can't determine in the System Profiler if I have PCIv1.1 or v2.0. Does anyone know how to find out? MacTracker and machistory.com haven't answered the question. It seems some of the MacPro1,1 models shipped with v1.1 and some with v2.0. How do I determine what I have? Thanks for your help!
SPECS FROM MY SYSTEM PROFILER (SERIAL RM727......)
GRAPHICS/DISPLAYS
NVIDIA GeForce 7300 GT
Chipset Model: NVIDIA GeForce 7300 GT
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0393
Revision ID: 0x00a1
ROM Revision: 3008
PCI CARDS
NVIDIA GeForce 7300 GT
Name: NVDA,Display-B
Type: display
Bus: PCI
Slot: Slot-1
Vendor ID: 0x10de
Device ID: 0x0393
Subsystem Vendor ID: 0x0000
Subsystem ID: 0x0010
ROM Revision: 3008
Revision ID: 0x00a1
Link Width: x16

How do I determine whether I have PCI Express v1.1 or v2.0?
Hi,
Open Apple System Profiler (About this Mac:More info) and look at the Hardware: Model Identifier. If it says Mac Pro 1,1 or Mac Pro 2,1 you have PCIe v1.1 slots.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro/
If it says Mac Pro 3,1 you have PCIe v1.1 in slots 3 and 4 and PCIe v2.0 in slots 1 and 2.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2008/
If it says Mac Pro 4,1 you have PCIe v2.0 in all four slots.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2009/
Hope that helps!

How to find out, whether an input document of a process is IRM-protected?

Having an LiveCycle process with an input variable of type document.
How to find out, whether the document is a standard PDF or an IRM-protected PDF?
Thanks,
Dilettanto

Really no way to tell from a given PDF-file, whether it is IRM-protected?

How do I determine whether a serial number is still good?

I have two serial numbers for Final Cut Studio, and one of them has been used. How do I determine which number is still good without installing the software?

You can't. The only way you can tell if a serial number is already used is if you try to launch FCP and another machine on the same network already has FCP open with the same SN. If the other machine isn't on...or not on the network, then FCP will launch fine. This is how you can install one copy of FCP with one SN onto two machines...a tower and a laptop...but use only one at a time...per the license agreement.

How to Quickly Determine Whether or not Specific Hotfixes or Updates are Installed?

I have a handful of applications that require specific hotfixes or updates to be installed. An excellent example of this is Internet Explorer 11 which has
9 prerequisites. (well only 6 are required, the remaining 3 prerequisites provide a better experience.)
Is there a reliable & fast way of checking for whether or not a specific hotfix and/or patch/update has been installed?
I am aware of `wmic qfe` but
According to
this, it will only "retrieve updates for Windows OS itself and its components (such as Windows Internet Explorer (IE) or Windows Server roles and features)"
Even if I'm checking for just 1 hotifx, it takes roughly 6 seconds to retrieve that information. When we're checking for dozen or two hotfixid's that quickly adds up. `Measure-Command {wmic qfe where "hotfixid='kb982018'"}` So
for IE11, we're looking at nearly 1 minute of waiting. Nonsense.
Note: I'm not asking "is my system patched?" nor am I asking for a report of installed patches. I could use WSUS, SCCM, MBSA and a multitude of other solutions for that. I need something scriptable that will install a specific prerequisite
at runtime, so I'm looking for a batch/vbscript/powershell solution that'll be quick, like 1 second quick, not 5+ per KB.

Thanks. I'm no expert. I don't have a slew of characters before or after my name. This isn't an I'm right/you're wrong situation. I don't claim to know everything - just trying to mitigate the questions I know I'm going to be asked.
Prior to posting, I saw
your post here (which is great I might add) which works, and it will work for determining whether or not a machine has a specific update/hotfix installed. But it consistently took 6 seconds to retrieve a single result on our assets. This
was on a Core i7 with 8GB and an SSD running Windows 8.1 Pro. This doesn't bode well for our day-to-day systems which are Core 2 Duo's with 4GB and spindle disks. Unless my math is wrong, if I'm checking for all 6 possible required IE11 prereqs
thats 36 seconds of wait time just for WMI queries. I'm just shocked it takes so long which made me wonder whether or not there was a faster retrieval method.
Why would I think there's a faster method? The closest example I can think of might be a software install. Sure, I can query WMI, but that too takes a while. But I could a
`reg query HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{product code}` or `reg query HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\Mozilla Firefox 29.0.1 (x86 en-US)`
then check errorlevel to determine if the product was installed, right? Or take it a step further & check the `/v Version` to make sure it matches what I expect it to be, right? We don't have fancy tools here like Altiris or SCCM
:( Reg query just appears to be significantly faster than wmic/gwmi in that specific scenario. That gave me hope there
might be a faster option for checking for installed updates & hotfixes.
IE11
tries to install the proper prerequisites. If that fails, they'll have to be done manually.
And it just so happens that the IE11 install
does fail in our environment when we don't install the manually. Fortunately we're not ready to deploy IE11, so there's no rush to push IE11. I was merely using IE11 as an example because by virtue of the articles existence, this
is a possible real-world scenario. If I know that we can safely regression test the 6 patches for IE11, and just have it be an optional installation for the users that want or need it, then I can add the prerequisite logic to the script to help ensure
a successful installation. Again, an IE11 deployment isn't the goal here. IE11 is just the example.

How do I determine whether I run 32 bit oder 64 bit?

Hi guys,
this is probably a very simple question. How do I find out whether my processor runs 32bit or 64bit? Using the Terminal, I can't find that piece of information with system_profiler.
Thank you in advance!

Use the apropos command to list system commands that you do not know exist. For example I used "apropos CPU" and it returned arch. arch is like a manaul way to tell your Mac to use one type of CPU archetecture over another. It's presedence.
This sound dangerous. But it does not really address your question.
Typing arch returns i386 in standard output.
There is a AppleDev pages on this topic -
http://developer.apple.com/documentation/Darwin/Reference/Manpages/man3/arch.3.h tml.
At least I looked.

How do I determine whether the current page in Forms is the last page.

I have a requirement of printing amount in words using SPELL_AMOUNT Funtion Module, in SAP Scripts.
When I have only one Item Line, I am able to successfully, print the amount.
The moment i have line items pouring to the next page, I see that the I am unable to retrieve the spelled amount from the Function Module.
I think may be i need to find out if the current page is the last page, and if it is so, print the amount on the last page, .i.e., the page where the item lines have overflowed to. How do i find this out.
Can anybody, suggest something.
Regards,
Owais...

I wonder if you could do something like this. Wrap your logic with this IF statement.
/: IF &PAGE& = &SAPSCRIPT-FORMPAGES&
/: ENDIF
Regards,
Rich Heilman

How can I determine whether my Exchange 2007 32-bit or 64-bit

I want to apply SP1 and would like to know which is the correct SP1 for me.
thanks in advance.
Omar Nawaz

Exchange 2007 is 64 bits only.
For production, yes. But for labs and testing, there is a 32-bit version:
Download Exchange 2007 Evaluation
http://www.petri.co.il/download_exchange_2007_evaluation.htm
Exchange Server 2007 Service Pack 3
http://www.microsoft.com/downloads/details.aspx?FamilyID=1687160b-634a-43cb-a65a-f355cff0afa6&displaylang=en
MCTS: Messaging | MCSE: S+M | Small Business Specialist

How do I determinie where to save document

I'm writing in Pages on the iPad. The document is automatically saved to iCloud. Is there a way to save it somewhere else? Like Dropbox or the iPads internl memory?
Åke

Eldberg wrote:
Thanks! This is excellent. (Only I still miss the Mac menu bar and "Save as..." which is the most useful computer function ever invented.)
So do I, not real wild about the way that you save in Lion and Mountain Lion.
Sometimes I wonder why Apple took something that worked so well, forever .... And felt the need to change it. Ah well... Technology moves on and we must move on with it or get left behind.

HT3696 how can I determine whether I am running 64 or 32 bit on my i7 mac

I have a i7 that is 64 bit I want to run in 32 bit how can I view which bit its running ?

If it's OS X 10.7 it's 64 bit OS, if you have 32 bit Intel programs they can run, but only use half the registers, swtich to 64 bit versions of your programs when avaialble.
No need to worry about anything.
Having a issue?

How can I determine whether to use an event structure or a case structure?

I'm starting a large project and need a state machine. I can't decide on whether to use a case structure or event structure. Is there an article or other information that describes criteria for selecting between the two approaches?
Thank you,
Chuck
Solved!
Go to Solution.

Hi Chuck,
Well case structures and event structures differ quite alot. Here's a link for indepth information on Event Structures, and using them in state machines: http://zone.ni.com/devzone/cda/tut/p/id/2962. Hopefuly this will help you make up your mind.
Let me know if you have any questions after reading it.
Regards,
Dominic Walker
Cardiff University
Electrical and Electronic Engineering Student

How to Clear GR/IR when business area is different.

Dear All,
Using F.13 i cleared my GR/IR account. After doing this there are some items left, which are still not cleared. On verification found that the business area is different in GR and IR i.e, The BA on GR/IR is different on accounting documents for material document (MIGO) and invoice (MIRO).
We are using the criterion ZUONR in OB74 (addition rules for automatic clearing).
How should I proceed to clear these documents.
Regards,
Srinivas.

Please let us know how it is resolved.
thanks
srik

Store business document inactive in transaction CJ20N

Hi,
The option "Store Business Document" is inactive in the transaction CJ20N.
I saw a couple of forums that said that I have to create an archive link for this but I don't know for example what "Object Type" I can use for this in the transaction "OAC3" or what steps I have to follow to enable this option.
Thanks for the help!

Hi,
I think that I figure it out how can I activate the "store business document" using your comments and this forum:
Activate GOS business application for object PREL
Now, my question is, could I use any TOA0# table when I'm creating an object type in the transaction OAC3?
I saw that in my system I have the tables TOA01, TOA02 and TOA03 created but these tables contains entries.. is ok if I use for example TOA01 for the "Object type" that I have to create?
Thanks for the help!
Carlos

How can I determine Bus Speed

Hi all
Dumb question #2.
The beast is a G4 MDD with dual 450MHz chips and the model number is M5183 and the machine number as per System Profiler is 406. Serial number is SG03402HK5W
Got all that.
I need to determine Bus Speed so I can buy the proper Ram Cards for this machine. It was supplies from the eBay seller with PC133 chips in there and surprisingly enough it runs 9.2.1 just fine.
How can I determine whether my machine is a 100MHz or 133MHz.
I suspect my Machine is not an MMD but a Gigabit Ethernet with dual 450 processors. Is this correct?
John Fenn

You can find all the G4 specs here to identify your machine and get the RAM specs and bus speed.
-Douggo
G4 Dual 867 MDD Mac OS X (10.4.3) 1.25GB RAM; 3 HDD's; Pioneer 106D; 20" Cinema Display; 30GB iPod Photo

How should we determine whether a business document is edi enabled

Similar Messages

Maybe you are looking for